sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Huré, J. -M.

Normalized to: Huré, J.

21 article(s) in total. 27 co-authors, from 1 to 10 common article(s). Median position in authors list is 1,0.

[1]  oai:arXiv.org:2005.08507  [pdf] - 2101558
The exterior gravitational potential of toroids
Comments: 15 pages, 12 figures, accepted for publication in MNRAS
Submitted: 2020-05-18
We perform a bivariate Taylor expansion of the axisymmetric Green function in order to determine the exterior potential of a static thin toroidal shell having a circular section, as given by the Laplace equation. This expansion, performed at the centre of the section, consists in an infinite series in the powers of the minor-to-major radius ratio $e$ of the shell. It is appropriate for a solid, homogeneous torus, as well as for inhomogeneous bodies (the case of a core stratification is considered). We show that the leading term is identical to the potential of a loop having the same main radius and the same mass | this "similarity" is shown to hold in the ${\cal O}(e^2)$ order. The series converges very well, especially close to the surface of the toroid where the average relative precision is $\sim 10^{-3}$ for $e\! = \!0.1$ at order zero, and as low as a few $10^{-6}$ at second order. The Laplace equation is satisfied {\em exactly} in every order, so no extra density is induced by truncation. The gravitational acceleration, important in dynamical studies, is reproduced with the same accuracy. The technique also applies to the magnetic potential and field generated by azimuthal currents as met in terrestrial and astrophysical plasmas.
[2]  oai:arXiv.org:1907.08151  [pdf] - 1919009
Rigidly rotating, incompressible spheroid-ring systems: new bifurcations, critical rotations and degenerate states
Comments: Accepted for publication in MNRAS
Submitted: 2019-07-18
The equilibrium of incompressible spheroid-ring systems in rigid rotation is investigated by numerical means for a unity density contrast. A great diversity of binary configurations is obtained, with no limit neither in the mass ratio, nor in the orbital separation. We found only detached binaries, meaning that the end-point of the $\epsilon_2$-sequence is the single binary state in strict contact, easily prone to mass-exchange. The solutions show a remarkable confinement in the rotation frequency-angular momentum diagram, with a total absence of equilibrium for $\Omega^2/ \pi G \rho \gtrsim 0.21$. A short band of degeneracy is present next to the one-ring sequence. We unveil a continuum of bifurcations all along the ascending side of the Maclaurin sequence for eccentricities of the ellipsoid less than $\approx 0.612$ and which involves a gradually expanding, initially massless loop.
[3]  oai:arXiv.org:1905.01913  [pdf] - 1882686
Interior potential of a toroidal shell from pole values
Comments: Accepted for publication in MNRAS
Submitted: 2019-05-06
We have investigated the toroidal analog of ellipsoidal shells of matter, which are of great significance in Astrophysics. The exact formula for the gravitational potential $\Psi(R,Z)$ of a shell with a circular section at the pole of toroidal coordinates is first established. It depends on the mass of the shell, its main radius and axis-ratio $e$ (i.e. core-to-main radius ratio), and involves the product of the complete elliptic integrals of the first and second kinds. Next, we show that successive partial derivatives $\partial^{n +m} \Psi/\partial_{R^n} \partial_{Z^m}$ are also accessible by analytical means at that singular point, thereby enabling the expansion of the interior potential as a bivariate series. Then, we have generated approximations at orders $0$, $1$, $2$ and $3$, corresponding to increasing accuracy. Numerical experiments confirm the great reliability of the approach, in particular for small-to-moderate axis ratios ($e^2 \lesssim 0.1$ typically). In contrast with the ellipsoidal case (Newton's theorem), the potential is not uniform inside the shell cavity as a consequence of the curvature. We explain how to construct the interior potential of toroidal shells with a thick edge (i.e. tubes), and how a core stratification can be accounted for. This is a new step towards the full description of the gravitating potential and forces of tori and rings. Applications also concern electrically-charged systems, and thus go beyond the context of gravitation.
[4]  oai:arXiv.org:1711.04464  [pdf] - 1591116
The equilibrium of over-pressurised polytropes
Comments: 16 pages
Submitted: 2017-11-13
We investigate the impact of an external pressure on the structure of self-gravitating polytropes for axially symmetric ellipsoids and rings. The confinement of the fluid by photons is accounted for through a boundary condition on the enthalpy $H$. Equilibrium configurations are determined numerically from a generalised "Self-Consistent-Field"-method. The new algorithm incorporates an intra-loop re-scaling operator ${\cal R}(H)$, which is essential for both convergence and getting self-normalised solutions. The main control parameter is the external-to-core enthalpy ratio. In the case of uniform rotation rate and uniform surrounding pressure, we compute the mass, the volume, the rotation rate and the maximum enthalpy. This is repeated for a few polytropic indices $n$. For a given axis ratio, over-pressurization globally increases all output quantities, and this is more pronounced for large $n$. Density profiles are flatter than in the absence of an external pressure. When the control parameter asymptotically tends to unity, the fluid converges toward the incompressible solution, whatever the index, but becomes geometrically singular. Equilibrium sequences, obtained by varying the axis ratio, are built. States of critical rotation are greatly exceeded or even disappear. The same trends are observed with differential rotation. Finally, the typical response to a photon point source is presented. Strong irradiation favours sharp edges. Applications concern star forming regions and matter orbiting young stars and black holes.
[5]  oai:arXiv.org:1610.05953  [pdf] - 1528323
Toroidal figures of equilibrium from a 2nd-order accurate, accelerated SCF-method with subgrid approach
Comments: accepted for publication; 18 pages; 26 figures
Submitted: 2016-10-19
We compute the structure of a self-gravitating torus with polytropic equation-of-state (EOS) rotating in an imposed centrifugal potential. The Poisson-solver is based on isotropic multigrid with optimal covering factor (fluid section-to-grid area ratio). We work at $2$nd-order in the grid resolution for both finite difference and quadrature schemes. For soft EOS (i.e. polytropic index $n \ge 1$), the underlying $2$nd-order is naturally recovered for Boundary Values (BVs) and any other integrated quantity sensitive to the mass density (mass, angular momentum, volume, Virial Parameter, etc.), i.e. errors vary with the number $N$ of nodes per direction as $\sim 1/N^2$. This is, however, not observed for purely geometrical quantities (surface area, meridional section area, volume), unless a subgrid approach is considered (i.e. boundary detection). Equilibrium sequences are also much better described, especially close to critical rotation. Yet another technical effort is required for hard EOS ($n < 1$), due to infinite mass density gradients at the fluid surface. We fix the problem by using kernel splitting. Finally, we propose an accelerated version of the SCF-algorithm based on a node-by-node pre-conditionning of the mass density at each step. The computing time is reduced by a factor $2$ typically, regardless of the polytropic index. There is a priori no obstacle to applying these results and techniques to ellipsoidal configurations and even to $3$D-configurations.
[6]  oai:arXiv.org:1411.7272  [pdf] - 1223353
A truly Newtonian softening length for disc simulations
Comments: Accepted for publication in MNRAS, 8 pages, 10 figures
Submitted: 2014-11-26
The softened point mass model is commonly used in simulations of gaseous discs including self-gravity while the value of associated length \lambda remains, to some degree, controversial. This ``parameter'' is however fully constrained when, in a discretized disc, all fluid cells are demanded to obey Newton's law. We examine the topology of solutions in this context, focusing on cylindrical cells more or less vertically elongated. We find that not only the nominal length depends critically on the cell's shape (curvature, radial extension, height), but it is either a real or an imaginary number. Setting \lambda as a fraction of the local disc thickness -- as usually done -- is indeed not the optimal choice. We then propose a novel prescription valid irrespective of the disc properties and grid spacings. The benefit, which amounts to 2-3 more digits typically, is illustrated in a few concrete cases. A detailed mathematical analysis is in progress.
[7]  oai:arXiv.org:1401.2743  [pdf] - 1202697
Self-gravity in thin discs and edge effects: an extension of Paczynski's approximation
Comments: Accepted for publication in A&A
Submitted: 2014-01-13
As hydrostatic equilibrium of gaseous discs is partly governed by the gravity field, we have estimated the component caused by a vertically homogeneous disc, with a special attention for the outer regions where self-gravity classically appears. The accuracy of the integral formula is better than 1%, whatever the disc thickness, radial extension and radial density profile. At order zero, the field is even algebraic for thin discs and writes $- 4 \pi G \Sigma(R) f_{edge} (R)$ at disc surface, thereby correcting Paczynski's formula by a multiplying factor $f_{edge} \gtrsim 1/2$, which depends on the relative distance to the edges and the local disc thickness. For very centrally condensed discs however, this local contribution can be surpassed by action of mass stored in the inner regions, possibly resulting in $f_{edge} \gg 1$. A criterion setting the limit between these two regimes is derived. These result are robust in the sense that the details of vertical stratification are not critical. We briefly discuss how hydrostatic equilibrium is impacted. In particular, the disc flaring should not reverse in the self-gravitating region, which contradicts what is usually obtained from Paczynski's formula. This suggests that i) these outer regions are probably not fully shadowed by the inner ones (important when illuminated by a central star), and ii) the flared shape of discs does not firmly prove the absence or weakness of self-gravity.
[8]  oai:arXiv.org:1401.2758  [pdf] - 1202699
Self-gravity in curved mesh elements
Comments: Accepted for publication in Cel. Mech. and Dyn. Astron. A basic Fortran 90 program is available as a supplementary resource linked to the online version of the paper (or upon request, by email)
Submitted: 2014-01-13
The local character of self-gravity along with the number of spatial dimensions are critical issues when computing the potential and forces inside massive systems like stars and disks. This appears from the discretisation scale where each cell of the numerical grid is a self-interacting body in itself. There is apparently no closed-form expression yet giving the potential of a three-dimensional homogeneous cylindrical or spherical cell, in contrast with the Cartesian case. By using Green's theorem, we show that the potential integral for such polar-type 3D sectors -- initially, a volume integral with singular kernel -- can be converted into a regular line-integral running over the lateral contour, thereby generalising a formula already known under axial symmetry. It therefore is a step towards the obtention of another potential/density pair. The new kernel is a finite function of the cell's shape (with the simplest form in cylindrical geometry), and mixes incomplete elliptic integrals, inverse trigonometric and hyperbolic functions. The contour integral is easy to compute; it is valid in the whole physical space, exterior and interior to the sector itself and works in fact for a wide variety of shapes of astrophysical interest (e.g. sectors of tori or flared discs). This result is suited to easily providing reference solutions, and to reconstructing potential and forces in inhomogeneous systems by superposition. The contour integrals for the 3 components of the acceleration vector are explicitely given.
[9]  oai:arXiv.org:1304.6302  [pdf] - 1166171
Exact, singularity-free recasting of the Newtonian potential in continuous media
Comments: Accepted for publication in Astron. & Astrophys
Submitted: 2013-04-23
The gravitational potential is a key function involved in many astrophysical problems. Its evaluation inside continuous media from Newton's law is known to be challenging because of the diverging kernel 1/|r-r'|. This difficulty is generally treated with avoidance techniques (e.g. multipole expansions, softening length) themselves not without drawbacks. In this article, we present a new path that basically fixes the point-mass singularity problem in systems with, at least, two dimensions. It consists of recasting the gravitational potential in an equivalent integro-differential form, namely the cross-derivative of a "hyperpotential" (i.e., an auxiliary scalar function). In contrast with the potential, the hyperpotential is the convolution of the mass density with a finite amplitude kernel. We show that closed-form expressions for this new kernel can be directly deduced from the potential of homogeneous sheets. We then give a few formulae appropriate to the Cartesian, cylindrical and spherical coordinate systems, including axial symmetry. The method is essentially not limited, either on the geometry of the source or on the distribution, and its implementation is straightforward. Several tests based upon simple quadrature/differentiation schemes are presented (the homogeneous rectangular sheet, cuboid and disk, the Maclaurin disk and a truncated Lane-Emden solution). Compared with a direct summation, the extra computational cost is low and the gain is real: no truncated series, no free parameter, and a relative accuracy better than 1% for typically 16 nodes per spatial direction using the most basic numerical schemes.
[10]  oai:arXiv.org:1209.0869  [pdf] - 1151131
A key-formula to compute the gravitational potential of inhomogeneous discs in cylindrical coordinates
Comments: Accepted for publication in Celestial Mechanics and Dynamical Astronomy
Submitted: 2012-09-05
We have established the exact expression for the gravitational potential of a homogeneous polar cell - an elementary pattern used in hydrodynamical simulations of gravitating discs. This formula, which is a closed-form, works for any opening angle and radial extension of the cell. It is valid at any point in space, i.e. in the plane of the distribution (inside and outside) as well as off-plane, thereby generalizing the results reported by Durand (1953) for the circular disc. The three components of the gravitational acceleration are given. The mathematical demonstration proceeds from the "incomplete version of Durand's formula" for the potential (based on complete elliptic integrals). We determine first the potential due to the circular sector (i.e. a pie-slice sheet), and then deduce that of the polar cell (from convenient radial scaling and subtraction). As a by-product, we generate an integral theorem stating that "the angular average of the potential of any circular sector along its tangent circle is 2/PI times the value at the corner". A few examples are presented. For numerical resolutions and cell shapes commonly used in disc simulations, we quantify the importance of curvature effects by performing a direct comparison between the potential of the polar cell and that of the Cartesian (i.e. rectangular) cell having the same mass. Edge values are found to deviate roughly like 2E-3 x N/256 in relative (N is the number of grid points in the radial direction), while the agreement is typically four orders of magnitude better for values at the cell's center. We also produce a reliable approximation for the potential, valid in the cell's plane, inside and close to the cell. Its remarkable accuracy, about 5E-4 x N/256 in relative, is sufficient to estimate the cell's self-acceleration.
[11]  oai:arXiv.org:1205.6342  [pdf] - 1123729
The potential of discs from a "mean Green function"
Comments: Accepted for publication in MNRAS, 11 pages
Submitted: 2012-05-29
By using various properties of the complete elliptic integrals, we have derived an alternative expression for the gravitational potential of axially symmetric bodies, which is free of singular kernel in contrast with the classical form. This is mainly a radial integral of the local surface density weighted by a regular "mean Green function" which depends explicitly on the body's vertical thickness. Rigorously, this result stands for a wide variety of configurations, as soon as the density structure is vertically homogeneous. Nevertheless, the sensitivity to vertical stratification | the Gaussian profile has been considered | appears weak provided that the surface density is conserved. For bodies with small aspect ratio (i.e. geometrically thin discs), a first-order Taylor expansion furnishes an excellent approximation for this mean Green function, the absolute error being of the fourth order in the aspect ratio. This formula is therefore well suited to studying the structure of self-gravitating discs and rings in the spirit of the "standard model of thin discs" where the vertical structure is often ignored, but it remains accurate for discs and tori of finite thickness. This approximation which perfectly saves the properties of Newton's law everywhere (in particular at large separations), is also very useful for dynamical studies where the body is just a source of gravity acting on external test particles.
[12]  oai:arXiv.org:1203.6822  [pdf] - 1117667
A substitute for the singular Green kernel in the Newtonian potential of celestial bodies
Comments: Accepted for publication in A&A; 7 pages, color figures
Submitted: 2012-03-30
The "point mass singularity" inherent in Newton's law for gravitation represents a major difficulty in accurately determining the potential and forces inside continuous bodies. Here we report a simple and efficient analytical method to bypass the singular Green kernel 1/|r-r'| inside the source without altering the nature of the interaction. We build an equivalent kernel made up of a "cool kernel", which is fully regular (and contains the long-range -GM/r asymptotic behavior), and the gradient of a "hyperkernel", which is also regular. Compared to the initial kernel, these two components are easily integrated over the source volume using standard numerical techniques. The demonstration is presented for three-dimensional distributions in cylindrical coordinates, which are well-suited to describing rotating bodies (stars, discs, asteroids, etc.) as commonly found in the Universe. An example of implementation is given. The case of axial symmetry is treated in detail, and the accuracy is checked by considering an exact potential/surface density pair corresponding to a flat circular disc. This framework provides new tools to keep or even improve the physical realism of models and simulations of self-gravitating systems, and represents, for some of them, a conclusive alternative to softened gravity.
[13]  oai:arXiv.org:1104.2457  [pdf] - 1053334
AGN disks and black holes on the weighting scales
Comments: accepted for publication in A&A
Submitted: 2011-04-13, last modified: 2011-04-27
We exploit our formula for the gravitational potential of finite size, power-law disks to derive a general expression linking the mass of the black hole in active galactic nuclei (AGN), the mass of the surrounding disk, its surface density profile (through the power index s), and the differential rotation law. We find that the global rotation curve v(R) of the disk in centrifugal balance does not obey a power law of the cylindrical radius R (except in the confusing case s = -2 that mimics a Keplerian motion), and discuss the local velocity index. This formula can help to understand how, from position-velocity diagrams, mass is shared between the disk and the black hole. To this purpose, we have checked the idea by generating a sample of synthetic data with different levels of Gaussian noise, added in radius. It turns out that, when observations are spread over a large radial domain and exhibit low dispersion (standard deviation less than 10% typically), the disk properties (mass and s-parameter) and black hole mass can be deduced from a non linear fit of kinematic data plotted on a (R, Rv 2)-diagram. For a deviation higher than 10%, masses are estimated fairly well from a linear regression (corresponding to the zeroth-order treatment of the formula), but the power index s is no longer accessible. We have applied the model to 7 AGN disks whose rotation has already been probed through water maser emission. For NGC3393 and UGC3789, the masses seem well constrained through the linear approach. For IC1481, the power-law exponent s can even be deduced. Because the model is scale-free, it applies to any kind of star/disk system. Extension to disks around young stars showing deviation from Keplerian motion is thus straightforward.
[14]  oai:arXiv.org:1104.5079  [pdf] - 1076250
The Newtonian potential of thin disks
Comments: Accepted for publication in A&A
Submitted: 2011-04-27
The one-dimensional, ordinary differential equation (ODE) by Hur\'e & Hersant (2007) that satisfies the midplane gravitational potential of truncated, flat power-law disks is extended to the whole physical space. It is shown that thickness effects (i.e. non-flatness) can be easily accounted for by implementing an appropriate "softening length" $\lambda$. The solution of this "softened ODE" has the following properties: i) it is regular at the edges (finite radial accelerations), ii) it possesses the correct long-range properties, iii) it matches the Newtonian potential of a geometrically thin disk very well, and iv) it tends continuously to the flat disk solution in the limit $\lambda \rightarrow 0$. As illustrated by many examples, the ODE, subject to exact Dirichlet conditions, can be solved numerically with efficiency for any given colatitude at second-order from center to infinity using radial mapping. This approach is therefore particularly well-suited to generating grids of gravitational forces in order to study particles moving under the field of a gravitating disk as found in various contexts (active nuclei, stellar systems, young stellar objects). Extension to non-power-law surface density profiles is straightforward through superposition. Grids can be produced upon request.
[15]  oai:arXiv.org:0909.0369  [pdf] - 1017341
A local prescription for the softening length in self-gravitating gaseous discs
Comments: accepted in A&A, 7 pages, 7 figures, web link for the F90 code and on-line calculations : http://www.obs.u-bordeaux1.fr/radio/JMHure/intro2single.php
Submitted: 2009-09-02, last modified: 2009-09-04
In 2D-simulations of self-gravitating gaseous discs, the potential is often computed in the framework of "softened gravity" initially designed for N-body codes. In this special context, the role of the softening length LAMBDA is twofold: i) to avoid numerical singularities in the integral representation of the potential (i.e., arising when the relative separation vanishes), and ii) to acount for stratification of matter in the direction perpendicular to the disc mid-plane. So far, most studies have considered LAMBDA as a free parameter and various values or formulae have been proposed without much mathematical justification. In this paper, we demonstrate by means of a rigorous calculus that it is possible to define LAMBDA such that the gravitational potential of a flat disc coincides at order zero with that of a geometically thin disc of the same surface density. Our prescription for LAMBDA, valid in the local, axisymmetric limit, has the required properties i) and ii). It is mainly an analytical function of the radius and disc thickness, and is sensitive to the vertical stratification. For mass density profiles considered (namely, profiles expandable over even powers of the altitude), we find that LAMBDA : i) is independant of the numerical mesh, ii) is always a fraction of the local thickness H, iii) goes through a minimum at the singularity (i.e., at null separation), and iv) is such that 0.13 < LAMBDA/H < 0.29 typically (depending on the separation and on density profile). These results should help us to improve the quality of 2D- and 3D-simulations of gaseous discs in several respects (physical realism, accuracy, and computing time).
[16]  oai:arXiv.org:0904.0351  [pdf] - 1001848
Self-gravity at the scale of the polar cell
Comments: 4 pages, 4 figures, A&A accepted
Submitted: 2009-04-02
We present the exact calculus of the gravitational potential and acceleration along the symmetry axis of a plane, homogeneous, polar cell as a function of mean radius a, radial extension e, and opening angle f. Accurate approximations are derived in the limit of high numerical resolution at the geometrical mean <a> of the inner and outer radii (a key-position in current FFT-based Poisson solvers). Our results are the full extension of the approximate formula given in the textbook of Binney & Tremaine to all resolutions. We also clarify definitely the question about the existence (or not) of self-forces in polar cells. We find that there is always a self-force at radius <a> except if the shape factor a.f/e reaches ~ 3.531, asymptotically. Such cells are therefore well suited to build a polar mesh for high resolution simulations of self-gravitating media in two dimensions. A by-product of this study is a newly discovered indefinite integral involving complete elliptic integral of the first kind over modulus.
[17]  oai:arXiv.org:0808.1634  [pdf] - 15327
A new equation for the mid-plane potential of power law discs. II. Exact solutions and approximate formulae
Comments: Accepted for publication in A&A, 13 pages, 8 figures
Submitted: 2008-08-12
The first-order ordinary differential equation (ODE) that describes the mid-plane gravitational potential in flat finite size discs in which the surface density is a power-law function of the radius R with exponent s (Hur\'e & Hersant 2007) is solved exactly in terms of infinite series. The formal solution of the ODE is derived and then converted into a series representation by expanding the elliptic integral of the first kind over its modulus before analytical integration. Inside the disc, the gravitational potential consists of three terms: a power law of radius R with index 1+s, and two infinite series of the variables R and 1/R. The convergence of the series can be accelerated, enabling the construction of reliable approximations. At the lowest-order, the potential inside large astrophysical discs (s ~ -1.5 +/- 1) is described by a very simple formula whose accuracy (a few percent typically) is easily increased by considering successive orders through a recurrence. A basic algorithm is given. Applications concern all theoretical models and numerical simulations where the influence of disc gravity must be checked and/or reliably taken into account.
[18]  oai:arXiv.org:astro-ph/0703603  [pdf] - 90412
A new equation for the mid-plane potential of power law disks
Comments: 5 pages, 1 figure, accepted for publication in A&A
Submitted: 2007-03-23, last modified: 2007-03-26
We show that the gravitational potential in the plane of an axisymmetrical flat disk where the surface density varies as a power of the radius obeys an inhomogeneous first-order Ordinary Differential Equation (ODE) solvable by standard techniques. The potential being exactly known at the origin for any power index (and at infinity as well), the search for solutions consists of a Two-point Boundary Value Problem (TBVP) with Dirichlet conditions. The computating time is then linear with the number of grid points, instead of quadratic from direct summation methods. Complex mass distributions which can be decomposed into a mixture of power law surface density profiles are easily accessible through the superposition principle. This ODE definitively takes the place of the untractable bidimensional Poisson equation for planar calculations. It opens new horizons to investigate various aspects related to self-gravity in astrophysical disks (force calculations, stability analysis, etc.).
[19]  oai:arXiv.org:astro-ph/0312529  [pdf] - 61742
Rotation curves of galactic disks for arbitrary surface density profiles: a simple and efficient recipe
Comments: 8 pages, Postscript, 1 figure, accepted in ApJ
Submitted: 2003-12-19
There is apparently a widespread belief that the gravitational field (and subsequently the rotation curve) ``inside'' razor-thin, axially symmetric disks can not be determined accurately from elliptic integrals because of the singular kernel in the Poisson integral. Here, we report a simple and powerful method to achieve this task numerically using the technique of ``density splitting''.
[20]  oai:arXiv.org:astro-ph/0012262  [pdf] - 39851
Accretion discs models with the "beta"-viscosity prescription derived from laboratory experiments
Comments: 8 pages, PostScript. accepted in Astron. & Astrophys
Submitted: 2000-12-12
We examine under which conditions one may apply, to steady state keplerian accretion discs, the "beta"-viscosity prescription which has been derived from rotating shear flow experiments (Richard & Zahn 1999). Using a vertically averaged model, we show that this law may be suitable for all three families of known systems: in young stellar objects, evolved binary stars and Active Galactic Nuclei discs (except in their outer gas pressure dominated regions where turbulence becomes hypersonic). According to the standard criterion for viscous stability, "beta"-discs are always stable throughout. Using realistic opacities and equation of state, we demonstrate that these discs are thermally unstable in the temperature domain where hydrogen recombines, when they are optically thick, and this could lead to limit cycle behavior. Radiation pressure dominated regions are thermally stable, in contrast with "alpha"-discs. This results in a fully stable solution for the innermost parts of AGN discs.
[21]  oai:arXiv.org:astro-ph/0011287  [pdf] - 1468180
The global structure of thin, stratified "alpha"-discs and the reliability of the one layer approximation
Comments: 4 pages, PostScript. Accepted in Astronomy & Astrophysics
Submitted: 2000-11-15
We report the results of a systematic comparison between the vertically averaged model and the vertically explicit model of steady state, Keplerian, optically thick "alpha"-discs. The simulations have concerned discs currently found in three different systems: dwarf novae, young stellar objects and active galactic nuclei. In each case, we have explored four decades of accretion rates and almost the whole disc area (except the narrow region where the vertically averaged model has degenerate solutions). We find that the one layer approach gives a remarkably good estimate of the main physical quantities in the disc, and specially the temperature at the equatorial plane which is accurate to within 30% for cases considered. The major deviations (by a factor < 4) are observed on the disc half-thickness. The sensitivity of the results to the "alpha"-parameter value has been tested for 0.001 < alpha < 0.1 and appears to be weak. This study suggests that the ``precision'' of the vertically averaged model which is easy to implement should be sufficient in practice for many astrophysical applications.