sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Hull, Scott D.

Normalized to: Hull, S.

6 article(s) in total. 25 co-authors, from 1 to 4 common article(s). Median position in authors list is 2,5.

[1]  oai:arXiv.org:2004.04269  [pdf] - 2077338
Scaling laws for the geometry of an impact-induced magma ocean
Comments: Submitted to Earth and Planetary Science Letters with revisions
Submitted: 2020-04-08
Growing protoplanets experience a number of impacts during the accretion stage. A large impactor hits the surface of a protoplanet and produces a magma ocean, where the impactor's iron emulsifies and experiences metal-silicate equilibration with the mantle of the protoplanet while it descends towards the base of the magma ocean. This process repeatedly occurs and determines the chemical compositions of both mantle and core. The partitioning is controlled by parameters such as the equilibration pressure and temperature, which are often associated with or assumed to be proportional to the pressure and temperature at the base of the magma ocean. The pressure and temperature depend on both the depth and shape of a magma ocean because a spatially confined magma ocean, namely, a melt pool, can have a larger equilibrium pressure than a radially uniform (global) magma ocean even if their melt volumes are the same. Here, we develop scaling laws for (1) the total internal energy gain due to an impact, and (2) the heat distribution within the mantle based on more than 100 smoothed particle hydrodynamic (SPH) simulations. We use Legendre polynomials to describe these scaling laws and determine their coefficients by linear regression, minimizing the error between our model and SPH simulations. The input parameters are the impact angle, total mass, impact velocity, and impactor-to-total mass ratio. We find that the internal energy gain by a large impact is well characterized by the summation of the kinetic energy and accretional potential energy release as a function of the impact angle. We determine that the equilibrium pressure at the base of a melt pool can be higher (by $10-50 \%$) than those obtained from conventional radially-uniform global magma ocean models. These melt scaling laws are publicly available on GitHub (https://github.com/mikinakajima/MeltScalingLaw).
[2]  oai:arXiv.org:1906.09207  [pdf] - 1904239
Hybrid CMOS detectors for the Lynx x-ray surveyor high definition x-ray imager
Comments: 11 pages, 13 figures. Published in the Journal of Astronomical Telescopes, Instruments, and Systems
Submitted: 2019-06-21
X-ray hybrid CMOS detectors (HCDs) are a promising candidate for future x-ray missions requiring high throughput and fine angular resolution along with large field-of-view, such as the high-definition x-ray imager (HDXI) instrument on the Lynx x-ray surveyor mission concept. These devices offer fast readout capability, low power consumption, and radiation hardness while maintaining high detection efficiency from 0.2 to 10 keV. In addition, x-ray hybrid CMOS sensors may be fabricated with small pixel sizes to accommodate high-resolution optics and have shown great improvements in recent years in noise and spectral resolution performance. In particular, 12.5-{\mu}m pitch prototype devices that include in-pixel correlated double sampling capability and crosstalk eliminating capacitive transimpedance amplifiers, have been fabricated and tested. These detectors have achieved read noise as low as 5.4 e-, and we measure the best energy resolution to be 148 eV (2.5%) at 5.9 keV and 78 eV (14.9%) at 0.53 keV. We will describe the characterization of these prototype small-pixel x-ray HCDs, and we will discuss their applicability to the HDXI instrument on Lynx.
[3]  oai:arXiv.org:1807.03351  [pdf] - 1811073
X-ray Hybrid CMOS Detectors: Recent Development and Characterization Progress
Comments: A few typos corrected in this version
Submitted: 2018-07-09, last modified: 2019-01-07
X-ray Hybrid CMOS Detectors (HCDs) have advantages over X-ray CCDs due to their higher readout rate abilities, flexible readout, inherent radiation hardness, and low power, which make them more suitable for the next generation large area X-ray telescope missions. The Penn State high energy astronomy laboratory has been working on the development and characterization of HCDs in collaboration with Teledyne Imaging Sensors (TIS). We characterized an H2RG detector with a Cryo-SIDECAR readout and controller, and we find an improved energy resolution of ~2.7 % at 5.9 keV and read noise of ~6.5 e-. This detector was successfully flown on NASA's first water recovery sounding rocket flight on April 4th, 2018. We have also been developing several new HCDs with potential applications for future X-ray astronomy missions. We are characterizing the performance of small-pixel HCDs (12.5 {\mu}m pitch), which are important for the development of a next-generation high-resolution imager with HCDs. We also characterized a 64 x 64 pixel prototype Speedster-EXD detector that uses comparators in each pixel to read out only those pixels having detectable signal, thereby providing an order of magnitude improvement in the effective readout rate. HCDs can also be utilized as a large FOV instrument to study the prompt and afterglow emissions of GRBs and detect black hole transients. In this context, we are characterizing a Lobster-HCD system for future CubeSat experiments. This paper briefly presents these new developments and experimental results.
[4]  oai:arXiv.org:1708.08956  [pdf] - 1765974
Recent X-ray hybrid CMOS detector developments and measurements
Comments: 12 pages, 11 figures, appears in Proc. SPIE 2017. error in reported detector thickness, changed from 200 microns to 100 microns
Submitted: 2017-08-29, last modified: 2018-10-12
The Penn State X-ray detector lab, in collaboration with Teledyne Imaging Sensors (TIS), have progressed their efforts to improve soft X-ray Hybrid CMOS detector (HCD) technology on multiple fronts. Having newly acquired a Teledyne cryogenic SIDECAR ASIC for use with HxRG devices, measurements were performed with an H2RG HCD and the cooled SIDECAR. We report new energy resolution and read noise measurements, which show a significant improvement over room temperature SIDECAR operation. Further, in order to meet the demands of future high-throughput and high spatial resolution X-ray observatories, detectors with fast readout and small pixel sizes are being developed. We report on characteristics of new X-ray HCDs with 12.5 micron pitch that include in-pixel CDS circuitry and crosstalk-eliminating CTIA amplifiers. In addition, PSU and TIS are developing a new large-scale array Speedster-EXD device. The original 64 x 64 pixel Speedster-EXD prototype used comparators in each pixel to enable event driven readout with order of magnitude higher effective readout rates, which will now be implemented in a 550 x 550 pixel device. Finally, the detector lab is involved in a sounding rocket mission that is slated to fly in 2018 with an off-plane reflection grating array and an H2RG X-ray HCD. We report on the planned detector configuration for this mission, which will increase the NASA technology readiness level of X-ray HCDs to TRL 9.
[5]  oai:arXiv.org:1807.04749  [pdf] - 1714925
Exploring Fine Subpixel Spatial Resolution of Hybrid CMOS Detectors
Comments:
Submitted: 2018-07-12
When an X-ray is incident onto the silicon absorber array of a detector, it liberates a large number of electrons, which tend to diffuse outward into what is referred to as the charge cloud. This number can vary from tens to thousands across the soft X-ray bandpass (0.1 - 10 keV). The charge cloud can then be picked up by several pixels, and forms a specific pattern based on the exact incident location of the X-ray. We present experimental results on subpixel resolution for a custom H2RG with 36 micron pixels, presented in Bray 2018, and compare the data to simulated images . We then apply the model simulation to a prototype small pixel hybrid CMOS detector (HCD) that would be suitable for the Lynx X-ray surveyor. We also discuss the ability of a small pixel detector to obtain subpixel resolution.
[6]  oai:arXiv.org:1706.10282  [pdf] - 1585370
Stellar Chemical Clues As To The Rarity of Exoplanetary Tectonics
Comments: Submitted. v2: fixed typo in abstract. 18 pages, 7 figures, 1 Table
Submitted: 2017-06-30, last modified: 2017-07-02
Earth's tectonic processes regulate the formation of continental crust, control its unique deep water and carbon cycles, and are vital to its surface habitability. A major driver of steady-state plate tectonics on Earth is the sinking of the cold subducting plate into the underlying mantle. This sinking is the result of the combined effects of the thermal contraction of the lithosphere and of metamorphic transitions within the basaltic oceanic crust and lithospheric mantle. The latter of these effects is dependent on the bulk composition of the planet, e.g., the major, terrestrial planet-building elements Mg, Si, Fe, Ca, Al, and Na, which vary in abundance across the Galaxy. We present thermodynamic phase-equilibria calculations of planetary differentiation to calculate both melt composition and mantle mineralogy, and show that a planet's refractory and moderately-volatile elemental abundances control a terrestrial planet's likelihood to produce mantle-derived, melt-extracted crusts that sink. Those planets forming with a higher concentration of Si and Na abundances are less likely to undergo sustained tectonics compared to the Earth. We find only 1/3 of the range of stellar compositions observed in the Galaxy is likely to host planets able to sustain density-driven tectonics compared to the Sun/Earth. Systems outside of this compositional range are less likely to produce planets able to tectonically regulate their climate and may be inhospitable to life as we know it.