Normalized to: Hull, J.
[1]
oai:arXiv.org:astro-ph/0601588 [pdf] - 79446
The SPEAR Instrument and On-Orbit Performance
Edelstein, Jerry;
Korpela, Eric;
Adolfo, Joe;
Bowen, Mark;
Feuerstein, Michael;
Hull, Jeffrey;
Jelinsky, Sharon;
Nishikida, Kaori;
McKee, Ken;
Berg, Peter;
Chung, Ray;
Fischer, Jorg;
Min, Kyoung-Wook;
Oh, Seung-Han;
Rhee, Jin-Guen;
Ryu, Kwangsun;
Shinn, Jong-Ho;
Han, Wonyong;
Jin, Ho;
Lee, Dae-Hee;
Nam, Uk-Won;
Park, Jang-Hyun;
Seon, Kwang-Il;
Yuk, In-Soo
Submitted: 2006-01-26
The SPEAR (or 'FIMS') instrumentation has been used to conduct the first
large-scale spectral mapping of diffuse cosmic far ultraviolet (FUV, 900-1750
AA) emission, including important diagnostics of interstellar hot (10^4 K -
10^6 K) and photoionized plasmas, H_2, and dust scattered starlight. The
instrumentation's performance has allowed for the unprecedented detection of
astrophysical diffuse far UV emission lines. A spectral resolution of 550 and
an imaging resolution of 5' is achieved on-orbit in the Short (900 - 1175 AA)
and Long (1335 - 1750 AA) bandpass channels within their respective 7.4 deg x
4.3' and 4.0 deg x 4.6' fields of view. We describe the SPEAR imaging
spectrographs, their performance, and the nature and handling of their data.
[2]
oai:arXiv.org:astro-ph/0304312 [pdf] - 1515978
A Cosmic Microwave Background Radiation Polarimeter Using
Superconducting Bearings
Submitted: 2003-04-16
Measurements of the polarization of the cosmic microwave background (CMB)
radiation are expected to significantly increase our understanding of the early
universe. We present a design for a CMB polarimeter in which a cryogenically
cooled half wave plate rotates by means of a high-temperature superconducting
(HTS) bearing. The design is optimized for implementation in MAXIPOL, a
balloon-borne CMB polarimeter. A prototype bearing, consisting of commercially
available ring-shaped permanent magnet and an array of YBCO bulk HTS material,
has been constructed. We measured the coefficient of friction as a function of
several parameters including temperature between 15 and 80 K, rotation
frequency between 0.3 and 3.5 Hz, levitation distance between 6 and 10 mm, and
ambient pressure between 10^{-7} and 1 torr. The low rotational drag of the HTS
bearing allows rotations for long periods of time with minimal input power and
negligible wear and tear thus making this technology suitable for a future
satellite mission.