Normalized to: Hua, W.
[1]
oai:arXiv.org:1502.06300 [pdf] - 1342731
Seismic isolation of Advanced LIGO: Review of strategy, instrumentation
and performance
Matichard, F.;
Lantz, B.;
Mittleman, R.;
Mason, K.;
Kissel, J.;
McIver, J.;
Abbott, B.;
Abbott, R.;
Abbott, S.;
Allwine, E.;
Barnum, S.;
Birch, J.;
Biscans, S.;
Celerier, C.;
Clark, D.;
Coyne, D.;
DeBra, D.;
DeRosa, R.;
Evans, M.;
Foley, S.;
Fritschel, P.;
Giaime, J. A.;
Gray, C.;
Grabeel, G.;
Hanson, J.;
Hardham, C.;
Hillard, M.;
Hua, W.;
Kucharczyk, C.;
Landry, M.;
Roux, A. Le;
Lhuillier, V.;
Macleod, D.;
Macinnis, M.;
Mitchell, R.;
Reilly, B. O;
Ottaway, D.;
Paris, H.;
Pele, A.;
Puma, M.;
Radkins, H.;
Ramet, C.;
Robinson, M.;
Ruet, L.;
Sarin, P.;
Shoemaker, D.;
Stein, A.;
Thomas, J.;
Vargas, M.;
Venkateswara, K.;
Warner, J.;
Wen, S.
Submitted: 2015-02-22, last modified: 2016-01-19
Isolating ground-based interferometric gravitational wave observatories from
environmental disturbances is one of the great challenges of the advanced
detector era. In order to directly observe gravitational waves, the detector
components and test masses must be highly inertially decoupled from the ground
motion not only to sense the faint strain of space-time induced by
gravitational waves, but also to maintain the resonance of the very sensitive 4
km interferometers.
This article presents the seismic isolation instrumentation and strategy
developed for Advanced LIGO interferometers. It reviews over a decade of
research on active isolation in the context of gravitational wave detection,
and presents the performance recently achieved with the Advanced LIGO
observatory. Lastly, it discusses prospects for future developments in active
seismic isolation and the anticipated benefits to astrophysical gravitational
wave searches.
Beyond gravitational wave research, the goal of this article is to provide
detailed isolation strategy guidelines for sensitive ground-based physics
experiments that may benefit from similar levels of inertial isolation.
[2]
oai:arXiv.org:1309.5685 [pdf] - 1179412
Hydraulic External Pre-Isolator System for LIGO
Wen, S.;
Mittleman, R.;
Mason, K.;
Giaime, J.;
Abbott, R.;
Kern, J.;
O'Reilly, B.;
Bork, R.;
Hammond, M.;
Hardham, C.;
Lantz, B.;
Hua, W.;
Coyne, D.;
Traylor, G.;
Overmier, H.;
Evans, T.;
Hanson, J.;
Spjeld, O.;
Macinnis, M.;
Mailand, K.;
Sellers, D.;
Carter, K.;
Sarin, P.
Submitted: 2013-09-22, last modified: 2013-10-17
The Hydraulic External Pre-Isolator (HEPI) is the first 6 degrees of freedom
active seismic isolation system implemented at the Laser Interferometer
Gravitational Wave Observatory (LIGO). Implementation was first completed at
the LIGO Livingston Observatory (LLO) prior to LIGO's 5th science run,
successfully cutting down the disturbance seen by LLO's suspended optics in the
two most prominent seismic disturbance bands, the microseism (0.1-0.3Hz) and
the anthropogenic (1-3Hz) bands, by a factor of a few to tens. The improvement
in seismic isolation contributed directly to LLO's much improved duty cycle of
66.7% and LIGO's triple coincident duty cycle of 53%. We report the design,
control scheme, and isolation performance of HEPI at LLO in this paper. Aided
with this success, funding for incorporating HEPI into the LIGO Hanford
Observatory was approved and installation is currently underway.
