The Wide-field Imager for Parker Solar Probe (WISPR) captures unprecedented white-light images of the solar corona and inner heliosphere. Thanks to the uniqueness of Parker Solar Probe's (PSP) orbit, WISPR is able to image ``locally'' coronal structures at high spatial and time resolutions. The observed plane of sky, however, rapidly changes because of the PSP's high orbital speed. Therefore, the interpretation of the dynamics of the coronal structures recorded by WISPR is not straightforward. A first study, undertaken by \citet{Liewer2019}, shows how different coronal features (e.g., streamers, flux ropes) appear in the field of view of WISPR by means of raytracing simulations. In particular, they analyze the effects of the spatial resolution changes on both the images and the associated height-time maps, and introduce the fundamentals for geometric triangulation. In this follow-up paper, we focus on the study of the total brightness of a simple, spherical, plasma density structure, to understand how the analysis of Thomson-scattered emission by the electrons in a coronal feature can shed light into the determination of its kinematic properties. We investigate two cases: {\it (a)} a density sphere at a constant distance from the Sun for different heliographic longitudes; {\it (b)} a density sphere moving outwardly with constant speed. The study allows us to characterize the effects of the varying heliocentric distance of the observer and scattering angle on the total brightness observed, which we exploit to contribute to a better determination of the position and speed of the coronal features observed by WISPR.

During its first solar encounter, the Parker Solar Probe (PSP) acquired unprecedented up-close imaging of a small Coronal Mass Ejection (CME) propagating in the forming slow solar wind. The CME originated as a cavity imaged in extreme ultraviolet that moved very slowly ($<50$ km/s) to the 3-5 solar radii (R$_\odot$) where it then accelerated to supersonic speeds. We present a new model of an erupting Flux Rope (FR) that computes the forces acting on its expansion with a computation of its internal magnetic field in three dimensions. The latter is accomplished by solving the Grad-Shafranov equation inside two-dimensional cross sections of the FR. We use this model to interpret the kinematic evolution and morphology of the CME imaged by PSP. We investigate the relative role of toroidal forces, momentum coupling, and buoyancy for different assumptions on the initial properties of the CME. The best agreement between the dynamic evolution of the observed and simulated FR is obtained by modeling the two-phase eruption process as the result of two episodes of poloidal flux injection. Each episode, possibly induced by magnetic reconnection, boosted the toroidal forces accelerating the FR out of the corona. We also find that the drag induced by the accelerating solar wind could account for about half of the acceleration experienced by the FR. We use the model to interpret the presence of a small dark cavity, clearly imaged by PSP deep inside the CME, as a low-density region dominated by its strong axial magnetic fields.

The Wide-field Imager for Solar PRobe (WISPR) obtained the first high-resolution images of coronal rays at heights below 15 R$_\odot$ when the Parker Solar Probe (PSP) was located inside 0.25 au during the first encounter. We exploit these remarkable images to reveal the structure of coronal rays at scales that are not easily discernible in images taken from near 1 au. To analyze and interpret WISPR observations, which evolve rapidly both radially and longitudinally, we construct a latitude versus time map using the full WISPR dataset from the first encounter. From the exploitation of this map and also from sequential WISPR images, we show the presence of multiple substructures inside streamers and pseudostreamers. WISPR unveils the fine-scale structure of the densest part of streamer rays that we identify as the solar origin of the heliospheric plasma sheet typically measured in situ in the solar wind. We exploit 3D magnetohydrodynamic models, and we construct synthetic white-light images to study the origin of the coronal structures observed by WISPR. Overall, including the effect of the spacecraft relative motion toward the individual coronal structures, we can interpret several observed features by WISPR. Moreover, we relate some coronal rays to folds in the heliospheric current sheet that are unresolved from 1 au. Other rays appear to form as a result of the inherently inhomogeneous distribution of open magnetic flux tubes.

On 2018 November 5, about 24 hours before the first close perihelion passage of Parker Solar Probe (PSP), a coronal mass ejection (CME) entered the field of view of the inner detector of the Wide-field Imager for Solar PRobe (WISPR) instrument onboard PSP, with the northward component of its trajectory carrying the leading edge of the CME off the top edge of the detector about four hours after its first appearance. We connect this event to a very small jet-like transient observed from 1 au by coronagraphs on both the SOlar and Heliospheric Observatory (SOHO) and the A component of the Solar TErrestrial RElations Observatory mission (STEREO-A). This allows us to make the first three-dimensional reconstruction of a CME structure considering both observations made very close to the Sun and images from two observatories at 1 au. The CME may be small and jet-like as viewed from 1 au, but the close-in vantage point of PSP/WISPR demonstrates that it is not intrinsically jet-like, but instead has a structure consistent with a flux rope morphology. Based on its appearance in the SOHO and STEREO-A images, the event belongs in the "streamer blob" class of transients, but its kinematic behavior is very unusual, with a more impulsive acceleration than previously studied blobs.

We present the construction of a new white-light coronal brightness index (CBI) from the entire archive of observations recorded by the Large Angle Spectrometric Coronagraph (LASCO) C2 camera between 1996 and 2017, comprising two full solar cycles. We reduce all fully calibrated daily C2 observations of the white light corona into a single daily coronal brightness observation for every day of observation recorded by the instrument, with mean daily brightness values binned into 0.1 Rsun radial x 1 degree angular regions from 2.4 -- 6.2 Rsun for a full 360-degrees. As a demonstration of the utility of the CBI, we construct a new solar irradiance proxy that correlates well with a variety of direct solar irradiance observations, with correlations shown to be in the range of 0.77-0.89. We also present a correlation mapping technique to show how irradiance correlations depend on, and relate to, coronal structure/locations, and to demonstrate how the LASCO CBI can be used to perform long-term "spatial correlation" studies to investigate relationships between the solar corona and any arbitrary concurrent geophysical index. Using this technique we find possible relationships between coronal brightness and plasma temperature, interplanetary magnetic field magnitude and (very weakly) proton density.

The physical mechanisms that produce the slow solar wind are still highly debated. Parker Solar Probe's (PSP's) second solar encounter provided a new opportunity to relate in situ measurements of the nascent slow solar wind with white-light images of streamer flows. We exploit data taken by the Solar and Heliospheric Observatory (SOHO), the Solar TErrestrial RElations Observatory (STEREO) and the Wide Imager on Solar Probe to reveal for the first time a close link between imaged streamer flows and the high-density plasma measured by the Solar Wind Electrons Alphas and Protons (SWEAP) experiment. We identify different types of slow winds measured by PSP that we relate to the spacecraft's magnetic connectivity (or not) to streamer flows. SWEAP measured high-density and highly variable plasma when PSP was well connected to streamers but more tenuous wind with much weaker density variations when it exited streamer flows. STEREO imaging of the release and propagation of small transients from the Sun to PSP reveals that the spacecraft was continually impacted by the southern edge of streamer transients. The impact of specific density structures is marked by a higher occurrence of magnetic field reversals measured by the FIELDS magnetometers. Magnetic reversals originating from the streamers are associated with larger density variations compared with reversals originating outside streamers. We tentatively interpret these findings in terms of magnetic reconnection between open magnetic fields and coronal loops with different properties, providing support for the formation of a subset of the slow wind by magnetic reconnection.

We present the identification and preliminary analysis of a dust trail following the orbit of (3200) Phaethon as seen in white light images recorded by the Wide-field Imager for Parker Solar Probe (WISPR) instrument on the NASA Parker Solar Probe (PSP) mission. During PSP's first solar encounter in November 2018, a dust trail following Phaethon's orbit was visible for several days and crossing two fields of view. Preliminary analyses indicate this trail to have a visual magnitude of 15.8 $\pm$0.3 per pixel and a surface brightness of 25.0 mag arcsec$^{-2}$ as seen by PSP/WISPR from a distance of $\sim$0.2 au from the trail. We estimate the total mass of the stream to be $\sim(0.4-1.3){\times}10^{12}$ kg, which is consistent with, though slightly underestimates, the assumed mass of the Geminid stream but is far larger than the current dust production of Phaethon could support. Our results imply that we are observing a natural clustering of at least some portion of the Geminid meteor stream through its perihelion, as opposed to dust produced more recently from perihelion activity of Phaethon.

The Wide-field Imager for Solar Probe (WISPR) on board the Parker Solar Probe (PSP) observed a CME on 2018 November 01, the first day of the initial PSP encounter. The speed of the CME, approximately 200-300 km s$^{-1}$ in the WISPR field of view, is typical of slow, streamer blowout CMEs. This event was also observed by the LASCO coronagraphs. WISPR and LASCO view remarkably similar structures that enable useful cross-comparison between the two data sets as well as stereoscopic imaging of the CME. Analysis is extended to lower heights by linking the white-light observations to EUV data from AIA, which reveal a structure that erupts more than a full day earlier before the CME finally gathers enough velocity to propagate outward. This EUV feature appears as a brightness enhancement in cooler temperatures such as 171 \AA, but as a cavity in nominal coronal temperatures such as 193 \AA. By comparing this circular, dark feature in 193 \AA \ to the dark, white-light cavity at the center of the eruption in WISPR and LASCO, it can be seen that this is one coherent structure that exists prior to the eruption in the low corona before entering the heliosphere and likely corresponds to the core of the magnetic flux rope. It is also believed that the relative weakness of the event contributed to the clarity of the flux rope in WISPR, as the CME did not experience impulsive forces or strong interaction with external structures that can lead to more complex structural evolution.

The magnetic field shapes the structure of the solar corona but we still know little about the interrelationships between the coronal magnetic field configurations and the resulting quasi-stationary structures observed in coronagraphic images (as streamers, plumes, coronal holes). One way to obtain information on the large-scale structure of the coronal magnetic field is to extrapolate it from photospheric data and compare the results with coronagraphic images. Our aim is to verify if this comparison can be a fast method to check systematically the reliability of the many methods available to reconstruct the coronal magnetic field. Coronal fields are usually extrapolated from photospheric measurements typically in a region close to the central meridian on the solar disk and then compared with coronagraphic images at the limbs, acquired at least 7 days before or after to account for solar rotation, implicitly assuming that no significant changes occurred in the corona during that period. In this work, we combine images from three coronagraphs (SOHO/LASCO-C2 and the two STEREO/SECCHI-COR1) observing the Sun from different viewing angles to build Carrington maps covering the entire corona to reduce the effect of temporal evolution to ~ 5 days. We then compare the position of the observed streamers in these Carrington maps with that of the neutral lines obtained from four different magnetic field extrapolations, to evaluate the performances of the latter in the solar corona. Our results show that the location of coronal streamers can provide important indications to discriminate between different magnetic field extrapolations.

We identify coronal mass ejections (CMEs) associated with magnetic clouds (MCs) observed near Earth by the Wind spacecraft from 2008 to mid-2012, a time period when the two STEREO spacecraft were well positioned to study Earth-directed CMEs. We find 31 out of 48 Wind MCs during this period can be clearly connected with a CME that is trackable in STEREO imagery all the way from the Sun to near 1 AU. For these events, we perform full 3-D reconstructions of the CME structure and kinematics, assuming a flux rope morphology for the CME shape, considering the full complement of STEREO and SOHO imaging constraints. We find that the flux rope orientations and sizes inferred from imaging are not well correlated with MC orientations and sizes inferred from the Wind data. However, velocities within the MC region are reproduced reasonably well by the image-based reconstruction. Our kinematic measurements are used to provide simple prescriptions for predicting CME arrival times at Earth, provided for a range of distances from the Sun where CME velocity measurements might be made. Finally, we discuss the differences in the morphology and kinematics of CME flux ropes associated with different surface phenomena (flares, filament eruptions, or no surface activity).

Views of two bright prominence eruptions trackable all the way to 1AU are here presented, using the heliospheric imagers on the Solar TErrestrial RElations Observatory (STEREO) spacecraft. The two events first erupted from the Sun on 2011 June 7 and 2012 August 31, respectively. Only these two examples of clear prominence eruptions observable this far from the Sun could be found in the STEREO image database, emphasizing the rarity of prominence eruptions this persistently bright. For the 2011 June event, a time-dependent 3-D reconstruction of the prominence structure is made using point-by-point triangulation. This is not possible for the August event due to a poor viewing geometry. Unlike the coronal mass ejection (CME) that accompanies it, the 2011 June prominence exhibits little deceleration from the Sun to 1 AU, as a consequence moving upwards within the CME. This demonstrates that prominences are not necessarily tied to the CME's magnetic structure far from the Sun. A mathematical framework is developed for describing the degree of self-similarity for the prominence's expansion away from the Sun. This analysis suggests only modest deviations from self-similar expansion, but close to the Sun the prominence expands radially somewhat more rapidly than self-similarity would predict.

We intend to provide a comprehensive answer to the question on whether all Coronal Mass Ejections (CMEs) have flux rope structure. To achieve this, we present a synthesis of the LASCO CME observations over the last sixteen years, assisted by 3D MHD simulations of the breakout model, EUV and coronagraphic observations from STEREO and SDO, and statistics from a revised LASCO CME database. We argue that the bright loop often seen as the CME leading edge is the result of pileup at the boundary of the erupting flux rope irrespective of whether a cavity or, more generally, a 3-part CME can be identified. Based on our previous work on white light shock detection and supported by the MHD simulations, we identify a new type of morphology, the `two-front' morphology. It consists of a faint front followed by diffuse emission and the bright loop-like CME leading edge. We show that the faint front is caused by density compression at a wave (or possibly shock) front driven by the CME. We also present high-detailed multi-wavelength EUV observations that clarify the relative positioning of the prominence at the bottom of a coronal cavity with clear flux rope structure. Finally, we visually check the full LASCO CME database for flux rope structures. In the process, we classify the events into two clear flux rope classes (`3-part', `Loop'), jets and outflows (no clear structure). We find that at least 40% of the observed CMEs have clear flux rope structures. We propose a new definition for flux rope CMEs (FR-CMEs) as a coherent magnetic, twist-carrying coronal structure with angular width of at least 40 deg and able to reach beyond 10 Rsun which erupts on a time scale of a few minutes to several hours. We conclude that flux ropes are a common occurrence in CMEs and pose a challenge for future studies to identify CMEs that are clearly not FR-CMEs.

We use STEREO imagery to study the morphology of a shock driven by a fast coronal mass ejection (CME) launched from the Sun on 2011 March 7. The source region of the CME is located just to the east of a coronal hole. The CME ejecta is deflected away from the hole, in contrast with the shock, which readily expands into the fast outflow from the coronal hole. The result is a CME with ejecta not well centered within the shock surrounding it. The shock shape inferred from the imaging is compared with in situ data at 1 AU, where the shock is observed near Earth by the Wind spacecraft, and at STEREO-A. Shock normals computed from the in situ data are consistent with the shock morphology inferred from imaging.

We present an analysis of small-scale, periodic, solar-wind density enhancements (length-scales as small as \approx 1000 Mm) observed in images from the Heliospheric Imager (HI) aboard STEREO A. We discuss their possible relationship to periodic fluctuations of the proton density that have been identified at 1 AU using in-situ plasma measurements. Specifically, Viall, Kepko, and Spence (2008) examined 11 years of in-situ solar-wind density measurements at 1 AU and demonstrated that not only turbulent structures, but also non-turbulent periodic density structures exist in the solar wind with scale sizes of hundreds to one thousand Mm. In a subsequent paper, Viall, Spence, and Kasper (2009) analyzed the {\alpha} to proton solar-wind abundance ratio measured during one such event of periodic density structures, demonstrating that the plasma behavior was highly suggestive that either temporally or spatially varying coronal source plasma created those density structures. Large periodic density structures observed at 1 AU, which were generated in the corona, can be observable in coronal and heliospheric white-light images if they possess sufficiently high density contrast. Indeed, we identify such periodic density structures as they enter the HI field of view and follow them as they advect with the solar wind through the images. The smaller periodic density structures that we identify in the images are comparable in size to the larger structures analyzed in-situ at 1 AU, yielding further evidence that periodic density enhancements are a consequence of coronal activity as the solar wind is formed.

The LASCO coronagraphs, in continuous operation since 1995, have observed the evolution of the solar corona and coronal mass ejections (CMEs) over a full solar cycle with high quality images and regular cadence. This is the first time that such a dataset becomes available and constitutes a unique resource for the study of CMEs. In this paper, we present a comprehensive investigation of the solar cycle dependence on the CME mass and energy over a full solar cycle (1996-2009) including the first in-depth discussion of the mass and energy analysis methods and their associated errors. Our analysis provides several results worthy of further studies. It demonstrates the possible existence of two event classes; 'normal' CMEs reaching constant mass for $>10$ R$_{\sun}$ and 'pseudo' CMEs which disappear in the C3 FOV. It shows that the mass and energy properties of CME reach constant levels, and therefore should be measured, only above $\sim 10 R_\sun$. The mass density ($g/R_\sun^2$) of CMEs varies relatively little ($<$ order of magnitude) suggesting that the majority of the mass originates from a small range in coronal heights. We find a sudden reduction in the CME mass in mid-2003 which may be related to a change in the electron content of the large scale corona and we uncover the presence of a six-month periodicity in the ejected mass from 2003 onwards.

We report on the radio-emission characteristics of 222 interplanetary (IP) shocks. A surprisingly large fraction of the IP shocks (~34%) is radio quiet (i.e., the shocks lacked type II radio bursts). The CMEs associated with the RQ shocks are generally slow (average speed ~535 km/s) and only ~40% of the CMEs were halos. The corresponding numbers for CMEs associated with radio loud (RL) shocks are 1237 km/s and 72%, respectively. The RQ shocks are also accompanied by lower peak soft X-ray flux. CMEs associated with RQ (RL) shocks are generally accelerating (decelerating). The kinematics of CMEs associated with the km type II bursts is similar to those of RQ shocks, except that the former are slightly more energetic. Comparison of the shock The RQ shocks seem to be mostly subcritical and quasi-perpendicular. The radio-quietness is predominant in the rise phase and decreases through the maximum and declining phases of solar cycle 23. The solar sources of the shock-driving CMEs follow the sunspot butterfly diagram, consistent with the higher-energy requirement for driving shocks.

We present stereoscopic reconstructions of the location and inclination of polar plumes of two data sets based on the two simultaneously recorded images taken by the EUVI telescopes in the SECCHI instrument package onboard the \emph{STEREO (Solar TErrestrial RElations Observatory)} spacecraft. The ten plumes investigated show a superradial expansion in the coronal hole in 3D which is consistent with the 2D results. Their deviations from the local meridian planes are rather small with an average of $6.47^{\circ}$. By comparing the reconstructed plumes with a dipole field with its axis along the solar rotation axis, it is found that plumes are inclined more horizontally than the dipole field. The lower the latitude is, the larger is the deviation from the dipole field. The relationship between plumes and bright points has been investigated and they are not always associated. For the first data set, based on the 3D height of plumes and the electron density derived from SUMER/\emph{SOHO} Si {\sc viii} line pair, we found that electron densities along the plumes decrease with height above the solar surface. The temperature obtained from the density scale height is 1.6 to 1.8 times larger than the temperature obtained from Mg {\sc ix} line ratios. We attribute this discrepancy to a deviation of the electron and the ion temperatures. Finally, we have found that the outflow speeds studied in the O {\sc vi} line in the plumes corrected by the angle between the line of sight and the plume orientation are quite small with a maximum of 10 $\mathrm{km s^{-1}}$. It is unlikely that plumes are a dominant contributor to the fast solar wind.

A filament eruption, accompanied by a B9.5 flare, coronal dimming and an EUV wave, was observed by the Solar TERrestrial Relations Observatory (STEREO) on 19 May 2007, beginning at about 13:00 UT. Here, we use observations from the SECCHI/EUVI telescopes and other solar observations to analyze the behavior and geometry of the filament before and during the eruption. At this time, STEREO A and B were separated by about 8.5 degrees, sufficient to determine the three-dimensional structure of the filament using stereoscopy. The filament could be followed in SECCHI/EUVI 304 A stereoscopic data from about 12 hours before to about 2 hours after the eruption, allowing us to determine the 3D trajectory of the erupting filament. From the 3D reconstructions of the filament and the chromospheric ribbons in the early stage of the eruption, simultaneous heating of both the rising filamentary material and the chromosphere directly below is observed, consistent with an eruption resulting from magnetic reconnection below the filament. Comparisons of the filament during eruption in 304 A and Halpha show that when it becomes emissive in He II, it tends to disappear in Halpha, indicating that the disappearance probably results from heating or motion, not loss, of filamentary material.

We perform the first kinematic analysis of a CME observed by both imaging and in situ instruments on board STEREO, namely the SECCHI, PLASTIC, and IMPACT experiments. Launched on 2008 February 4, the CME is tracked continuously from initiation to 1 AU using the SECCHI imagers on both STEREO spacecraft, and is then detected by the PLASTIC and IMPACT particle and field detectors on board STEREO-B. The CME is also detected in situ by ACE and SOHO/CELIAS at Earth's L1 Lagrangian point. The CME hits STEREO-B, ACE, and SOHO on 2008 February 7, but misses STEREO-A entirely. This event provides a good example of just how different the same event can look when viewed from different perspectives. We also demonstrate many ways in which the comprehensive and continuous coverage of this CME by STEREO improves confidence in our assessment of its kinematic behavior, with potential ramifications for space weather forecasting. The observations provide several lines of evidence in favor of the observable part of the CME being narrow in angular extent, a determination crucial for deciding how best to convert observed CME elongation angles from Sun-center to actual Sun-center distances.

We present the first reconstruction of the three-dimensional shape of magnetic loops in an active region from two different vantage points based on simultaneously recorded images. The images were taken by the two EUVI telescopes of the SECCHI instrument onboard the recently launched STEREO spacecraft when the heliocentric separation of the two space probes was 12 degrees. We demostrate that these data allow to obtain a reliable three-dimensional reconstruction of sufficiently bright loops. The result is compared with field lines derived from a coronal magnetic field model extrapolated from a photospheric magnetogram recorded nearly simultaneously by SOHO/MDI. We attribute discrepancies between reconstructed loops and extrapolated field lines to the inadequacy of the linear force-free field model used for the extrapolation.

We report on the spatial relationship between solar flares and coronal mass ejections (CMEs) observed during 1996-2005 inclusive. We identified 496 flare-CME pairs considering limb flares (distance from central meridian > 45 deg) with soft X-ray flare size > C3 level. The CMEs were detected by the Large Angle and Spectrometric Coronagraph (LASCO) on board the Solar and Heliospheric Observatory (SOHO). We investigated the flare positions with respect to the CME span for the events with X-class, M-class, and C-class flares separately. It is found that the most frequent flare site is at the center of the CME span for all the three classes, but that frequency is different for the different classes. Many X-class flares often lie at the center of the associated CME, while C-class flares widely spread to the outside of the CME span. The former is different from previous studies, which concluded that no preferred flare site exists. We compared our result with the previous studies and conclude that the long-term LASCO observation enabled us to obtain the detailed spatial relation between flares and CMEs. Our finding calls for a closer flare-CME relationship and supports eruption models typified by the CSHKP magnetic reconnection model.

We investigated the frequency distributions of flares with and without coronal mass ejections (CMEs) as a function of flare parameters (peak flux, fluence, and duration of soft X-ray flares). We used CMEs observed by the Large Angle and Spectrometric Coronagraph (LASCO) on board the Solar and Heliospheric Observatory (SOHO) mission and soft X-ray flares (C3.2 and above) observed by the GOES satellites during 1996 to 2005. We found that the distributions obey a power-law of the form: dN/dX~X^-alpha, where X is a flare parameter and dN is the number of events recorded within the interval [X, X+dX]. For the flares with (without) CMEs, we obtained the power-law index alpha=1.98+-0.05 (alpha=2.52+-0.03) for the peak flux, alpha=1.79+-0.05 (alpha=2.47+-0.11) for the fluence, and alpha=2.49+-0.11 (alpha=3.22+-0.15) for the duration. The power-law indices for flares without CMEs are steeper than those for flares with CMEs. The larger power-law index for flares without CMEs supports the possibility that nanoflares contribute to coronal heating.

The LASCO C2 and C3 coronagraphs recorded a unique coronal mass ejection on April 2, 1999. The event did not have the typical three-part CME structure and involved a small filament eruption without any visibile overlying streamer ejecta. The event exhibited an unusually clear signature of a wave propagating at the CME flanks. The speed and density of the CME front and flanks were consistent with the existence of a shock. To better establish the nature of the white light wave signature, we employed a simple MHD simulation using the LASCO measurements as constraints. Both the measurements and the simulation strongly suggest that the white light feature is the density enhancement from a fast-mode MHD shock. In addition, the LASCO images clearly show streamers being deflected when the shock impinges on them. It is the first direct imaging of this interaction.

At sufficiently low frequencies, no ground-based radio array will be able to produce high resolution images while looking through the ionosphere. A space-based array will be needed to explore the objects and processes which dominate the sky at the lowest radio frequencies. An imaging radio interferometer based on a large number of small, inexpensive satellites would be able to track solar radio bursts associated with coronal mass ejections out to the distance of Earth, determine the frequency and duration of early epochs of nonthermal activity in galaxies, and provide unique information about the interstellar medium. This would be a "space-space" VLBI mission, as only baselines between satellites would be used. Angular resolution would be limited only by interstellar and interplanetary scattering.

We examine the energetics of Coronal Mass Ejections (CMEs) with data from the LASCO coronagraphs on SOHO. The LASCO observations provide fairly direct measurements of the mass, velocity and dimensions of CMEs. Using these basic measurements, we determine the potential and kinetic energies and their evolution for several CMEs that exhibit a flux-rope morphology. Assuming flux conservation, we use observations of the magnetic flux in a variety of magnetic clouds near the Earth to determine the magnetic flux and magnetic energy in CMEs near the Sun. We find that the potential and kinetic energies increase at the expense of the magnetic energy as the CME moves out, keeping the total energy roughly constant. This demonstrates that flux rope CMEs are magnetically driven. Furthermore, since their total energy is constant, the flux rope parts of the CMEs can be considered to be a closed system above $\sim$ 2 $R_{\sun}$.

We have examined images from the Large Angle Spectroscopic Coronagraph (LASCO) to study the relationship of Coronal Mass Ejections (CMEs) to coronal streamers. We wish to test the suggestion (Low 1996) that CMEs arise from flux ropes embedded in a streamer erupting, thus disrupting the streamer. The data span a period of two years near sunspot minimum through a period of increased activity as sunspot numbers increased. We have used LASCO data from the C2 coronagraph which records Thomson scattered white light from coronal electrons at heights between 1.5 and 6R_sun. Maps of the coronal streamers have been constructed from LASCO C2 observations at a height of 2.5R_sun at the east and west limbs. We have superposed the corresponding positions of CMEs observed with the C2 coronagraph onto the synoptic maps. We identified the different kinds of signatures CMEs leave on the streamer structure at this height (2.5R_sun). We find four types of CMEs with respect to their effect on streamers: 1. CMEs that disrupt the streamer 2. CMEs that have no effect on the streamer, even though they are related to it. 3. CMEs that create streamer-like structures 4. CMEs that are latitudinally displaced from the streamer. This is the most extensive observational study of the relation between CMEs and streamers to date. Previous studies using SMM data have made the general statement that CMEs are mostly associated with streamers, and that they frequently disrupt it. However, we find that approximately 35% of the observed CMEs bear no relation to the pre-existing streamer, while 46% have no effect on the observed streamer, even though they appear to be related to it. Our conclusions thus differ considerably from those of previous studies.