"Astronomical" or "circumstellar" silicate optical functions (real and imaginary indices of refraction n and k have been previously derived from compositionally and structurally disparate samples; past values were compiled from different sources in the literature, and are essentially kluges of observational, laboratory, and extrapolated or interpolated values. These synthetic optical functions were created because astronomers lack the quantitative data on amorphous silicates at all wavelengths needed for radiative transfer modeling. This paper provides optical functions that (1) are created with a consistent methodology, (2) use the same sample across all wavelengths, and (3) minimize interpolation and extrapolation wherever possible. We present electronic data tables of optical functions derived from mid-ultraviolet to far-infrared laboratory transmission spectra for two materials: iron-free glass with chondritic/solar atmospheric abundances, and metallic iron. We compare these optical functions to other popular n, k data used to model amorphous silicates (e.g., "astronomical" or "circumstellar" silicate), both directly and in application to a simple system: the dust shell of the post-AGB star HD161796. Using the new optical functions, we find that the far-IR profile of model SEDs are significantly affected by the ratio of glass to iron. Our case study on HD161796 shows that modeling with our new optical functions, the mineralogy is markedly different from that derived using synthetic optical functions and suggests a new scenario of crystalline silicate formation.

We present a laboratory study of silicate glasses of astrophysically relevant compositions including olivines, pyroxenes and melilites. With emphasis on the classic Si-O stretching feature near 10 microns, we compare infrared spectra of our new samples with laboratory spectra on ostensibly similar compositions, and also with synthetic silicate spectral data commonly used in dust modeling. Several different factors affect spectral features including sample chemistry (e.g., polymerization, Mg/Fe ratio, oxidation state and Al-content) and different sample preparation techniques lead to variations in porosity, density and water content. The convolution of chemical and physical effects makes it difficult to attribute changes in spectral parameters to any given variable. It is important that detailed chemical and structural characterization be provided along with laboratory spectra. In addition to composition and density, we measured the glass transition temperatures for the samples which place upper limits on the formation/processing temperatures of these solids in space. Popular synthetically-generated optical functions do not have spectral features that match any of our glass samples. However, the ~10 microns feature generated by the synthetic data rarely exactly matches the shape and peak position of astronomically observed silicate features. Our comparison with the synthetic spectra allows astronomers to determine likely candidates amongst our glass samples for matching astronomical observations.

Laboratory measurements of unpolarized and polarized absorption spectra of various samples and crystal stuctures of silicon carbide (SiC) are presented from 1200--35,000 cm$^{-1}$ ($\lambda \sim$ 8--0.28 $\mu$m) and used to improve the accuracy of optical functions ($n$ and $k$) from the infrared (IR) to the ultraviolet (UV). Comparison with previous $\lambda \sim$ 6--20 $\mu$m thin-film spectra constrains the thickness of the films and verifies that recent IR reflectivity data provide correct values for $k$ in the IR region. We extract $n$ and $k$ needed for radiative transfer models using a new ``difference method'', which utilizes transmission spectra measured from two SiC single-crystals with different thicknesses. This method is ideal for near-IR to visible regions where absorbance and reflectance are low and can be applied to any material. Comparing our results with previous UV measurements of SiC, we distinguish between chemical and structural effects at high frequency. We find that for all spectral regions, 3C ($\beta$-SiC) and the $\vec{E}\bot \vec{c}$ polarization of 6H (a type of $\alpha$-SiC) have almost identical optical functions that can be substituted for each other in modeling astronomical environments. Optical functions for $\vec{E} \| \vec{c}$ of 6H SiC have peaks shifted to lower frequency, permitting identification of this structure below $\lambda \sim4\mu$m. The onset of strong UV absorption for pure SiC occurs near 0.2 $\mu$m, but the presence of impurities redshifts the rise to 0.33 $\mu$m. Optical functions are similarly impacted. Such large differences in spectral characteristics due to structural and chemical effects should be observable and provide a means to distinguish chemical variation of SiC dust in space.

Silicon Carbide (SiC) optical constants are fundamental inputs for radiative transfer models of astrophysical dust environments. However, previously published values contain errors and do not adequately represent the bulk physical properties of the cubic (beta) SiC polytype usually found around carbon stars. We provide new, uncompromised optical constants for beta- and alpha-SiC derived from single-crystal reflectance spectra and investigate quantitatively whether there is any difference between alpha- and beta-SiC that can be seen in infrared spectra and optical functions. Previous optical constants for SiC do not reflect the true bulk properties, and they are only valid for a narrow grain size range. The new optical constants presented here will allow narrow constraints to be placed on the grain size and shape distribution that dominate in astrophysical environments. In addition, our calculated absorption coefficients are much higher than laboratory measurements, which has an impact on the use of previous data to constrain abundances of these dust grains.

Stars on the asymptotic giant branch (AGB) produce dust in their circumstellar shells. The nature of the dust-forming environment is influenced by the evolution of the stars, in terms of both chemistry and density, leading to an evolution in the nature of the dust that is produced. Carbon-rich AGB stars are known to produce silicon carbide (SiC). Furthermore, observations of the ~11um SiC feature show that the spectral features change in a sequence that correlates with stellar evolution. We present new infrared spectra of amorphous SiC and show that the ~9um feature seen in both emission and absorption, and correlated with trends in the ~11um feature, may be due to either amorphous SiC or to nano-crystalline diamond with a high proportion of Si substituting for C. Furthermore, we identify SiC absorption in three ISO spectra of extreme carbon stars, in addition to the four presented by Speck et al. (1997). An accurate description of the sequence in the IR spectra of carbon stars requires accounting for both SiC emission and absorption features. This level of detail is needed to infer the role of dust in evolution of carbon stars. Previous attempts to find a sequence in the infrared spectra of carbon stars considered SiC emission features, while neglecting SiC absorption features, leading to an interpretation of the sequence inadequately describes the role of dust. We show that the evolutionary sequence in carbon star spectra is consistent with a grain size evolution, such that dust grains get progressively smaller as the star evolves. The evolution of the grain sizes provides a natural explanation for the shift of the ~11um SiC feature in emission and in absorption. Further evidence for this scenario is seen in both post-AGB star spectra and in meteoritic studies of presolar grains.

Far-infrared spectra of laboratory silicates are normally obtained at room temperature even though the grains responsible for astronomical silicate emission bands seen at wavelengths >20 micron are likely to be at temperatures below ~150 K. In order to investigate the effect of temperature on silicate spectra, we have obtained absorption spectra of powdered forsterite and olivine, along with two orthoenstatites and diopside clinopyroxene, at 3.5+-0.5 K and at room temperature (295+-2K). To determine the changes in the spectra the resolution must be increased from 1 to 0.25 cm^-1 at both temperatures since a reduction in temperature reduces the phonon density, thereby reducing the width of the infrared peaks. Several bands observed at 295 K split at 3.5 K. At 3.5 K the widths of isolated single bands in olivine, enstatites and diopside are ~ 90% of their 295 K-widths. However, in forsterite the 3.5-K-widths of the 31-, 49- and 69-micron bands are, respectively, 90%, 45% and 31% of their 295 K widths. Due to an increase in phonon energy as the lattice contracts, 3.5-K-singlet peaks occur at shorter wavelengths than do the corresponding 295-K peaks; the magnitude of the wavelength shift increases from \~ 0-0.2 micron at 25 micron to ~0.9 micron at 80 micron. Changes in the relative absorbances of spectral peaks are also observed. The temperature dependence of lambda_pk and bandwidth shows promise as a means to deduce characteristic temperatures of mineralogically distinct grain populations. In addition, the observed changes in band strength with temperature will affect estimates of grain masses and relative mineral abundances inferred using room-temperature laboratory data.

Pre-solar grains of silicon carbide found in meteorites and interpreted as having had an origin around carbon stars from their isotopic composition, have all been found to be of the beta-SiC polytype. Yet to date fits to the 11.3 microns SiC emission band of carbon stars had been obtained only for alpha-SiC grains. We present thin film infrared (IR) absorption spectra measured in a diamond anvil cell for both the alpha- and beta- polymorphs of synthetic SiC and compare the results with previously published spectra taken using the KBr matrix method. We find that our thin film spectra have positions nearly identical to those obtained previously from finely ground samples in KBr. Hence, we show that this discrepancy has arisen from inappropriate `KBr corrections' having been made to laboratory spectra of SiC particles dispersed in KBr matrices. We re-fit a sample of carbon star mid-IR spectra, using laboratory data with no KBr correction applied, and show that beta-SiC grains fit the observations, while alpha-SiC grains do not. The discrepancy between meteoritic and astronomical identifications of the SiC-type is therefore removed. This work shows that the diamond anvil cell thin film method can be used to produce mineral spectra applicable to cosmic environments without further manipulation.