When studying the chemistry of PDRs, time dependence becomes important as visual extinction increases, since certain chemical timescales are comparable to the cloud lifetime. Dust temperature is also a key factor, since it significantly influences gas temperature and mobility on dust grains, determining the chemistry occurring on grain surfaces. We present a study of the dust temperature impact and time effects on the chemistry of different PDRs, using an updated version of the Meijerink PDR code and combining it with the time-dependent code Nahoon. We find the largest temperature effects in the inner regions of high $G$$_{\mathrm{0}}$ PDRs, where high dust temperatures favour the formation of simple oxygen-bearing molecules (especially that of O$_2$), while the formation of complex organic molecules is much more efficient at low dust temperatures. We also find that time-dependent effects strongly depend on the PDR type, since long timescales promote the destruction of oxygen-bearing molecules in the inner parts of low $G$$_{\mathrm{0}}$ PDRs, while favouring their formation and that of carbon-bearing molecules in high $G$$_{\mathrm{0}}$ PDRs. From the chemical evolution, we also conclude that, in dense PDRs, CO$_2$ is a late-forming ice compared to water ice, and confirm a layered ice structure on dust grains, with H$_2$O in lower layers than CO$_2$. Regarding steady state, the PDR edge reaches chemical equilibrium at early times ($\lesssim$10$^5$ yr). This time is even shorter ($<$10$^4$ yr) for high $G$$_{\mathrm{0}}$ PDRs. By contrast, inner regions reach equilibrium much later, especially low $G$$_{\mathrm{0}}$ PDRs, where steady state is reached at $\sim$10$^6$-10$^7$ yr.

Molecular hydrogen (H2) is the main constituent of the gas in the planet-forming disks that surround many PMS stars. H2 can be incorporated in the atmosphere of the giant planets. HD has been detected in a few disks and can be considered the most reliable tracer of H2. We wish to form H2 and HD efficiently for the varied conditions encountered in protoplanetary disks: the densities vary from 1E4 to 1E16 cm^-3; the dust temperatures range from 5 to 1500 K, the gas temperatures go from 5 to a few 1000 Kelvin, and the ultraviolet field can be 1E7 stronger than the standard interstellar field. We implemented a comprehensive model of H2 and HD formation on cold and warm grain surfaces and via hydrogenated PAHs in the physico-chemical code ProDiMo. The H2 and HD formation can proceed via the Langmuir-Hinshelwood and Eley-Ridel mechanisms for physisorbed or chemisorbed H (D) atoms. H2 and HD also form by H (D) abstraction from hydrogenated neutral and ionised PAHs and via gas phase reactions. H2 and HD are formed efficiently on dust grain surfaces from 10 to 700 K. All the deuterium is converted into HD in UV shielded regions as soon as H2 is formed by gas-phase D abstraction reactions. The detailed model compares well with standard analytical prescriptions for H2 (HD) formation. At low temperatures, H2 is formed from the encounter of two physisorbed atoms. HD molecules form on the grain surfaces and in the gas-phase. At temperatures greater than 20 K, the meeting between a weakly bound H- (or D-) atom or a gas-phase H (D) atom and a chemisorbed atom is the most efficient H2 formation route. H2 formation through hydrogenated PAHs alone is efficient above 80 K. The contribution of hydrogenated PAHs to the overall H2 and HD formation is relatively low if chemisorption on silicate is taken into account and if a small hydrogen abstraction cross-section is used.

The origin of the reservoirs of water on Earth is debated. The Earth's crust may contain at least three times more water than the oceans. This crust water is found in the form of phyllosilicates, whose origin probably differs from that of the oceans. We test the possibility to form phyllosilicates in protoplanetary disks, which can be the building blocks of terrestrial planets. We developed an exploratory rate-based warm surface chemistry model where water from the gas-phase can chemisorb on dust grain surfaces and subsequently diffuse into the silicate cores. We apply the phyllosilicate formation model to a zero-dimensional chemical model and to a 2D protoplanetary disk model (ProDiMo). The disk model includes in addition to the cold and warm surface chemistry continuum and line radiative transfer, photoprocesses (photodissociation, photoionization, and photodesorption), gas-phase cold and warm chemistry including three-body reactions, and detailed thermal balance. Despite the high energy barrier for water chemisorption on silicate grain surfaces and for diffusion into the core, the chemisorption sites at the surfaces can be occupied by a hydroxyl bond (-OH) at all gas and dust temperatures from 80 to 700 K for a gas density of 2E4 cm^-3. The chemisorption sites in the silicate cores are occupied at temperatures between 250 and 700 K. At higher temperatures thermal desorption of chemisorbed water occurs. The occupation efficiency is only limited by the maximum water uptake of the silicate. The timescales for complete hydration are at most 1E5 years for 1 mm radius grains at a gas density of 1E8 cm^-3. Phyllosilicates can be formed on dust grains at the dust coagulation stage in protoplanetary disks within 1 Myr. It is however not clear whether the amount of phyllosilicate formed by warm surface chemistry is sufficient compared to that found in Solar System objects.

Spectroscopic studies of ices in nearby star-forming regions indicate that ice mantles form on dust grains in two distinct steps, starting with polar ice formation (H2O rich) and switching to apolar ice (CO rich). We test how well the picture applies to more diffuse and quiescent clouds where the formation of the first layers of ice mantles can be witnessed. Medium-resolution near-infrared spectra are obtained toward background field stars behind the Pipe Nebula. The water ice absorption is positively detected at 3.0 micron in seven lines of sight out of 21 sources for which observed spectra are successfully reduced. The peak optical depth of the water ice is significantly lower than those in Taurus with the same visual extinction. The source with the highest water-ice optical depth shows CO ice absorption at 4.7 micron as well. The fractional abundance of CO ice with respect to water ice is 16+7-6 %, and about half as much as the values typically seen in low-mass star-forming regions. A small fractional abundance of CO ice is consistent with some of the existing simulations. Observations of CO2 ice in the early diffuse phase of a cloud play a decisive role in understanding the switching mechanism between polar and apolar ice formation.

The temperature of interstellar dust particles is of great importance to astronomers. It plays a crucial role in the thermodynamics of interstellar clouds, because of the gas-dust collisional coupling. It is also a key parameter in astrochemical studies that governs the rate at which molecules form on dust. In 3D (magneto)hydrodynamic simulations often a simple expression for the dust temperature is adopted, because of computational constraints, while astrochemical modelers tend to keep the dust temperature constant over a large range of parameter space. Our aim is to provide an easy-to-use parametric expression for the dust temperature as a function of visual extinction ($A_{\rm V}$) and to shed light on the critical dependencies of the dust temperature on the grain composition. We obtain an expression for the dust temperature by semi-analytically solving the dust thermal balance for different types of grains and compare to a collection of recent observational measurements. We also explore the effect of ices on the dust temperature. Our results show that a mixed carbonaceous-silicate type dust with a high carbon volume fraction matches the observations best. We find that ice formation allows the dust to be warmer by up to 15% at high optical depths ($A_{\rm V}> 20$ mag) in the interstellar medium. Our parametric expression for the dust temperature is presented as $T_{\rm d} = \left[ 11 + 5.7\times \tanh\bigl( 0.61 - \log_{10}(A_{\rm V})\bigr) \right] \, \chi_{\rm uv}^{1/5.9}$, where $\chi_{\rm uv}$ is in units of the Draine (1978) UV field

Understanding gas-grain chemistry of deuterium in star-forming objects may help to explain their history and present state. We aim to clarify how processes in ices affect the deuterium fractionation. In this regard, we investigate a Solar-mass protostellar envelope using an astrochemical rate-equation model that considers bulk-ice chem- istry. The results show a general agreement with the molecular D/H abundance ratios observed in low-mass protostars. The simultaneous processes of ice accumulation and rapid synthesis of HD on grain surfaces in the prestellar core hampers the deuteration of icy species. The observed very high D/H ratios exceeding 10 per cent, i.e., super- deuteration, are reproduced for formaldehyde and dimethyl ether, but not for other species in the protostellar envelope phase. Chemical transformations in bulk ice lower D/H ratios of icy species and do not help explaining the super-deuteration. In the protostellar phase, the D2O/HDO abundance ratio was calculated to be higher than the HDO/H2O ratio owing to gas-phase chemistry. Species that undergo evaporation from ices have high molecular D/H ratio and a high gas-phase abundance.

Ices play a critical role during the evolution of interstellar clouds. Their presence is ubiquitous in the dense molecular medium and their impact is not only limited to chemistry. Species adsorbed onto dust grains also affect cloud thermodynamics. It all depends on the interstellar conditions, the chemical parameters, and the composition of ice layers. In this work, I study the formation of ices by focusing on the interplay between gas and solid phase to determine their role on cloud evolution and star formation. I show that while the formation of ices greatly impacts the cloud chemistry, their role on the thermodynamics is more conservative, and their influence on star formation is only marginal.

In the earliest phases of star-forming clouds, stable molecular species, such as CO, are important coolants in the gas phase. Depletion of these molecules on dust surfaces affects the thermal balance of molecular clouds and with that their whole evolution. For the first time, we study the effect of grain surface chemistry (GSC) on star formation and its impact on the initial mass function (IMF). We follow a contracting translucent cloud in which we treat the gas-grain chemical interplay in detail, including the process of freeze-out. We perform 3d hydrodynamical simulations under three different conditions, a pure gas-phase model, a freeze-out model, and a complete chemistry model. The models display different thermal evolution during cloud collapse. The equation of state (EOS) of the gas becomes softer with CO freeze-out and the results show that at the onset of star formation, the cloud retains its evolution history such that the number of formed stars differ (by 7%) between the three models. While the stellar mass distribution results in a different IMF when we consider pure freeze-out, with the complete treatment of the GSC, the divergence from a pure gas-phase model is minimal. We find that the impact of freeze-out is balanced by the non-thermal processes; chemical and photodesorption. We also find an average filament width of 0.12 pc ($\pm$0.03 pc), and speculate that this may be a result from the changes in the EOS caused by the gas-dust thermal coupling. We conclude that GSC plays a big role in the chemical composition of molecular clouds and that surface processes are needed to accurately interpret observations, however, that GSC does not have a significant impact as far as star formation and the IMF is concerned.

Context. Interstellar dust particles, which represent 1% of the total mass, are recognized to be very powerful interstellar catalysts in star-forming regions. The presence of dust can have a strong impact on the chemical composition of molecular clouds. While observations show that many species that formed onto dust grains populate the gas phase, the process that transforms solid state into gas phase remains unclear. Aims. The aim of this paper is to consider the chemical desorption process, i.e. the process that releases solid species into the gas phase, in astrochemical models. These models allow determining the chemical composition of star-forming environments with an accurate treatment of the solid-phase chemistry. Methods. In paper I we derived a formula based on experimental studies with which we quantified the efficiencies of the chemical desorption process. Here we extend these results to astrophysical conditions. Results. The simulations of astrophysical environments show that the abundances of gas-phase methanol and H2O2 increase by four orders of magnitude, whereas gas-phase H2CO and HO2 increase by one order of magnitude when the chemical desorption process is taken into account. The composition of the ices strongly varies when the chemical desorption is considered or neglected. Conclusions. We show that the chemical desorption process, which directly transforms solid species into gas-phase species, is very efficient for many reactions. Applied to astrophysical environments such as Rho Oph A, we show that the chemical desorption efficiencies derived in this study reproduce the abundances of observed gas-phase methanol, HO2, and H2O2, and that the presence of these molecules in the gas shows the last signs of the evolution of a cloud before the frost.

Context. The presence of dust in the interstellar medium has profound consequences on the chemical composition of regions where stars are forming. Recent observations show that many species formed onto dust are populating the gas phase, especially in cold environments where UV and CR induced photons do not account for such processes. Aims. The aim of this paper is to understand and quantify the process that releases solid species into the gas phase, the so-called chemical desorption process, so that an explicit formula can be derived that can be included into astrochemical models. Methods. We present a collection of experimental results of more than 10 reactive systems. For each reaction, different substrates such as oxidized graphite and compact amorphous water ice are used. We derive a formula to reproduce the efficiencies of the chemical desorption process, which considers the equipartition of the energy of newly formed products, followed by classical bounce on the surface. In part II we extend these results to astrophysical conditions. Results. The equipartition of energy describes correctly the chemical desorption process on bare surfaces. On icy surfaces, the chemical desorption process is much less efficient and a better description of the interaction with the surface is still needed. Conclusions. We show that the mechanism that directly transforms solid species to gas phase species is efficient for many reactions.

During the evolution of diffuse clouds to molecular clouds, gas-phase molecules freeze out on surfaces of small dust particles to form ices. On dust surfaces, water is the main constituent of the icy mantle in which a complex chemistry is taking place. We aim to study the formation pathways and the composition of the ices throughout the evolution of diffuse clouds. For this purpose, we use time-dependent rate equations to calculate the molecular abundances in both gas phase and on solid surfaces (onto dust grains). We fully consider the gas-dust interplay by including the details of freeze-out, chemical and thermal desorption, as well as the most important photo-processes on grain surfaces. The difference in binding energies of chemical species on bare and icy surfaces is also incorporated into our equations. Using the numerical code FLASH, we perform a hydrodynamical simulation of a gravitationally bound diffuse cloud and follow its contraction. We find that while the dust grains are still bare, water formation is enhanced by grain surface chemistry which is subsequently released into the gas phase, enriching the molecular medium. The CO molecules, on the other hand, tend to freeze out gradually on bare grains. This causes CO to be well mixed and strongly present within the first ice layer. Once one monolayer of water ice has formed, the binding energy of the grain surface changes significantly and an immediate and strong depletion of gas-phase water and CO molecules occur. While hydrogenation converts solid CO into formaldehyde (H$_2$CO) and methanol (CH$_3$OH), water ice becomes the main constituent of the icy grains. Inside molecular clumps formaldehyde is more abundant than water and methanol in the gas phase owing its presence in part to chemical desorption.

Atoms and molecules, and in particular CO, are important coolants during the evolution of interstellar star-forming gas clouds. The presence of dust grains, which allow many chemical reactions to occur on their surfaces, strongly impacts the chemical composition of a cloud. At low temperatures, dust grains can lock-up species from the gas phase which freeze out and form ices. In this sense, dust can deplete important coolants. Our aim is to understand the effects of freeze-out on the thermal balance and the evolution of a gravitationally bound molecular cloud. For this purpose, we perform 3D hydrodynamical simulations with the adaptive mesh code FLASH. We simulate a gravitationally unstable cloud under two different conditions, with and without grain surface chemistry. We let the cloud evolve until one free-fall time is reached and track the thermal evolution and the abundances of species during this time. We see that at a number density of 10$^4$ cm$^{-3}$ most of the CO molecules are frozen on dust grains in the run with grain surface chemistry, thereby depriving the most important coolant. As a consequence, we find that the temperature of the gas rises up to $\sim$25 K. The temperature drops once again due to gas-grain collisional cooling when the density reaches a few$\times$10$^4$ cm$^{-3}$. We conclude that grain surface chemistry not only affects the chemical abundances in the gas phase, but also leaves a distinct imprint in the thermal evolution that impacts the fragmentation of a star-forming cloud. As a final step, we present the equation of state of a collapsing molecular cloud that has grain surface chemistry included.

Star formation in the centers of galaxies is thought to yield massive stars with a possibly top-heavy stellar mass distribution. It is likely that magnetic fields play a crucial role in the distribution of stellar masses inside star-forming molecular clouds. In this context, we explore the effects of magnetic fields, with a typical field strength of 38 microG, such as in RCW 38, and a field strength of 135 microG, similar to NGC 2024 and the infrared dark cloud G28.34+0.06, on the initial mass function (IMF) near (< 10 pc) a 10^7 solar mass black hole. Using these conditions, we perform a series of numerical simulations with the hydrodynamical code FLASH to elucidate the impact of magnetic fields on the IMF and the star-formation efficiency (SFE) emerging from an 800 solar mass cloud. We find that the collapse of a gravitationally unstable molecular cloud is slowed down with increasing magnetic field strength and that stars form along the field lines. The total number of stars formed during the simulations increases by a factor of 1.5-2 with magnetic fields. The main component of the IMF has a lognormal shape, with its peak shifted to sub-solar (< 0.3 M_sun) masses in the presence of magnetic fields, due to a decrease in the accretion rates from the gas reservoir. In addition, we see a top-heavy, nearly flat IMF above ~2 solar masses, from regions that were supported by magnetic pressure until high masses are reached. We also consider the effects of X-ray irradiation if the central black hole is active. X-ray feedback inhibits the formation of sub-solar masses and decreases the SFEs even further. Thus, the second contribution is no longer visible. We conclude that magnetic fields potentially change the SFE and the IMF both in active and inactive galaxies, and need to be taken into account in such calculations.

The conditions that affect the formation of stars in radiatively and mechanically active environments are quite different than the conditions that apply to our local interstellar neighborhood. In such galactic environments, a variety of feedback processes can play a significant role in shaping the initial mass function (IMF). Here, we present a numerical study on the effects of an accreting black hole and the influence of nearby massive stars to a collapsing, 800 M_sun, molecular cloud at 10 pc distance from the black hole. We parametrize and study radiative feedback effects of hard X-rays emanating from the black hole broad line region, increased cosmic ray rates due to supernovae in starbursts, and strong UV radiation produced by nearby massive stars. We also investigate the importance of shear from the supermassive, 10^6-10^8 M_sun, black hole as the star-forming cloud orbits around it. We find that thermal pressure from X-rays compresses the cloud, which induces a high star formation rate early on, but reduces the overall star formation efficiency to about 7% due to gas depletion by evaporation. We see that the turn-over mass of the IMF increases up to a factor of 2.3, M_turn = 1-1.5 M_sun, for the model with the highest X-ray flux (160 erg s^-1 cm^-2), while the high-mass slope of the IMF becomes Gamma > -1. This results in more high mass stars and a non-Salpeter IMF. Cosmic rays penetrate deeply into the cloud and increase the gas temperature (50-200 K), which leads to a reduced formation efficiency of low mass stars. High cosmic ray rates increase the average mass of stars, thereby shifting the turn-over mass to higher values, i.e., up to several solar masses. Due to this process, the onset of star formation is also delayed. We conclude that the IMF inside active galaxies is different than the one obtained from local environments.

Star formation is regulated through a variety of feedback processes. In this study, we treat feedback by X-rays and discuss its implications. Our aim is to investigate whether star formation is significantly affected when a star forming cloud resides in the vicinity of a strong X-ray source. We perform an Eulerian grid simulation with embedded Lagrangian sink particles of a collapsing molecular cloud near a massive, 10^7 M_o black hole. The chemical and thermal changes caused by radiation are incorporated into the FLASH code. When there is strong X-ray feedback the star forming cloud fragments into larger clumps whereby fewer but more massive protostellar cores are formed. Competitive accretion has a strong impact on the mass function and a near-flat, non-Salpeter IMF results.

Giant double-lobed radio source 4C34.47 displays a straight one-sided jet, measuring a record length of 380kpc, in its double-lobed radio structure. Assuming an intrinsically symmetric two-sided jet structure the radio source jet axis must be at least 33 degrees away from the sky plane, that is within 57 degrees from the line of sight. The radio polarization properties indicate that this giant source has largely outgrown the depolarizing halo generally associated with the host galaxies of powerful radio sources. The measured small depolarization asymmetry is nevertheless in accordance with its inferred orientation. All data for this giant radio source are in agreement with its preferred orientation as predicted within the unification scheme for powerful radio sources. Seen under a small aspect angle the radio source is large but not excessively large. The global properties of 4C34.47 do not differ from other giant (old) FR2 radio sources: it is a slowly expanding low-luminosity radio source.

Star formation is regulated through a variety of feedback processes. In this study, we treat feedback by metal injection and a UV background as well as by X-ray irradiation. Our aim is to investigate whether star formation is significantly affected when the ISM of a proto-galaxxy enjoys different metallicities and when a star forming cloud resides in the vicinity of a strong X-ray source. We perform cosmological Enzo simulations with a detailed treatment of non-zero metallicity chemistry and thermal balance. We also perform FLASH simulations with embedded Lagrangian sink particles of a collapsing molecular cloud near a massive, 10^{7} M\odot, black hole that produces X-ray radiation. We find that a multi-phase ISM forms for metallicites as small as 10^{-4} Solar at z = 6, with higher (10^{-2}Z\odot) metallicities supporting a cold (< 100 K) and dense (> 10^{3} cm^{-3}) phase at higher (z = 20) redshift. A star formation recipe based on the presence of a cold dense phase leads to a self-regulating mode in the presence of supernova and radiation feedback. We also find that when there is strong X-ray feedback a collapsing cloud fragments into larger clumps whereby fewer but more massive protostellar cores are formed. This is a consequence of the higher Jeans mass in the warm (50 K, due to ionization heating) molecular gas. Accretion processes dominate the mass function and a near-flat, non-Salpeter IMF results.

Properties of candidate stars, forming out of molecular clouds, depend on the ambient conditions of the parent cloud. We present a series of 2D and 3D simulations of fragmentation of molecular clouds in starburst regions as well as clouds under conditions in dwarf galaxies, leading to the formation of protostellar cores. We explore in particular the metallicity dependence of molecular cloud fragmentation and the possible variations in the dense core mass function, as the expression of a multi-phase ISM, due to dynamic and thermodynamic effects in starburst and metal-poor environments. To study the level of fragmentation during the collapse, the adaptive mesh refinement code FLASH is used. With this code, including self-gravity, thermal balance, turbulence and shocks, collapse is simulated with four different metallicity dependent cooling functions. Turbulent and rotational energies are considered as well. During the simulations, number densities of 10^8-10^9 cm^-3 are reached. The influences of dust and cosmic ray heating are investigated and a comparison to isothermal cases is made. The presented results indicate that fragmentation increases with metallicity, while cosmic ray and gas-grain collisional heating counteract this. We also find that modest rotation and turbulence can impact the cloud evolution as far as fragmentation is concerned. In this light, we conclude that radiative feedback, in starburst regions, will inhibit fragmentation, while low-metallicity dwarfs also should enjoy a star formation mode in which fragmentation is suppressed.