Context. Pluto's tenuous nitrogen (N2) atmosphere undergoes strong seasonal effects due to high obliquity and orbital eccentricity, and has been recently (July 2015) observed by the New Horizons spacecraft. Goals are (i) construct a well calibrated record of the seasonal evolution of surface pressure on Pluto and (ii) constrain the structure of the lower atmosphere using a central flash observed in 2015. Method: eleven stellar occultations by Pluto observed between 2002 and 2016 are used to retrieve atmospheric profiles (density, pressure, temperature) between $\sim$5 km and $\sim$380 km altitude levels (i.e. pressures from about 10 microbar to 10 nanobar). Results: (i) Pressure has suffered a monotonic increase from 1988 to 2016, that is compared to a seasonal volatile transport model, from which tight constraints on a combination of albedo and emissivity of N2 ice are derived; (ii) A central flash observed on 2015 June 29 is consistent with New Horizons REX profiles, provided that (a) large diurnal temperature variations (not expected by current models) occur over Sputnik Planitia and/or (b) hazes with tangential optical depth of about 0.3 are present at 4-7 km altitude levels and/or (c) the nominal REX density values are overestimated by an implausibly large factor of about 20% and/or (d) higher terrains block part of the flash in the Charon facing hemisphere.

We are undertaking a detailed investigation, based on the available evidence, of the sequence of events that led to the historical discovery of the first Quasar 3C273.

The Gaia Data Release 1 (GDR1) is a first, important step on the path of evolution of astrometric accuracy towards a much improved situation. Although asteroids are not present in GDR1, this intermediate release already impacts asteroid astrometry. Our goal is to investigate how the GDR1 can change the approach to a few typical problems, including the determination of orbits from short-arc astrometry, the exploitation of stellar occultations, and the impact risk assessment. We employ optimised asteroid orbit determination tools, and study the resulting orbit accuracy and post-fit residuals. For this goal, we use selected ground-based asteroid astrometry, and occultation events observed in the past. All measurements are calibrated by using GDR1 stars. We show that, by adopting GDR1, very short measurement arcs can already provide interesting orbital solutions, capable of correctly identifying Near Earth Asteroids (NEAs) and providing a much more accurate risk rating. We also demonstrate that occultations, previously used to derive asteroid size and shapes, now reach a new level of accuracy at which they can be fruitfully used to obtain astrometry at the level of accuracy of Gaia star positions.

Two narrow and dense rings (called C1R and C2R) were discovered around the Centaur object (10199) Chariklo during a stellar occultation observed on 2013 June 3. Following this discovery, we planned observations of several occultations by Chariklo's system in order to better characterize the physical properties of the ring and main body. Here, we use 12 successful occulations by Chariklo observed between 2014 and 2016. They provide ring profiles (physical width, opacity, edge structure) and constraints on the radii and pole position. Our new observations are currently consistent with the circular ring solution and pole position, to within the $\pm 3.3$ km formal uncertainty for the ring radii derived by Braga-Ribas et al. The six resolved C1R profiles reveal significant width variations from $\sim 5$ to 7.5 km. The width of the fainter ring C2R is less constrained, and may vary between 0.1 and 1 km. The inner and outer edges of C1R are consistent with infinitely sharp boundaries, with typical upper limits of one kilometer for the transition zone between the ring and empty space. No constraint on the sharpness of C2R's edges is available. A 1$\sigma$ upper limit of $\sim 20$ m is derived for the equivalent width of narrow (physical width <4 km) rings up to distances of 12,000 km, counted in the ring plane.

We use data from five stellar occultations observed between 2013 and 2016 to constrain Chariklo's size and shape, and the ring reflectivity. We consider four possible models for Chariklo (sphere, Maclaurin spheroid, tri-axial ellipsoid and Jacobi ellipsoid) and we use a Bayesian approach to estimate the corresponding parameters. The spherical model has a radius $R=129\pm3$ km. The Maclaurin model has equatorial and polar radii $a=b=143^{+3}_{-6}$ km and $c=96^{+14}_{-4}$ km, respectively, with density $970^{+300}_{-180}$ kg m$^{-3}$. The ellipsoidal model has semiaxes $a=148^{+6}_{-4}$ km, $b=132^{+6}_{-5}$ km and $c=102^{+10}_{-8}$ km. Finally, the Jacobi model has semiaxes $a$=157$\pm$4 km, $b$=139$\pm$ 4 km and $c$=86$\pm$1 km, and density $796^{+2}_{-4}$ kg m$^{-3}$ . Depending on the model, we obtain topographic features of 6-11 km, typical of Saturn icy satellites with similar size and density. We constrain Chariklo's geometric albedo between 3.1\% (sphere) and 4.9\% (ellipsoid), while the ring $I/F$ reflectivity is less constrained between 0.6\% (Jacobi) and 8.9\% (sphere). The ellipsoid model explains both the optical light curve and the long-term photometry variation of the system, giving a plausible value for the geometric albedo of the ring particles of $10-15\%$. The derived Chariklo's mass of 6-8$\times10^{18}$ kg places the rings close to the 3:1 resonance between the ring mean motion and Chariklo's rotation period.

Disk-integrated photometric data of asteroids do not contain accurate information on shape details or size scale. Additional data such as disk-resolved images or stellar occultation measurements further constrain asteroid shapes and allow size estimates. We aim to use all available disk-resolved images of about forty asteroids obtained by the Near-InfraRed Camera (Nirc2) mounted on the W.M. Keck II telescope together with the disk-integrated photometry and stellar occultation measurements to determine their volumes. We can then use the volume, in combination with the known mass, to derive the bulk density. We download and process all asteroid disk-resolved images obtained by the Nirc2 that are available in the Keck Observatory Archive (KOA). We combine optical disk-integrated data and stellar occultation profiles with the disk-resolved images and use the All-Data Asteroid Modeling (ADAM) algorithm for the shape and size modeling. Our approach provides constraints on the expected uncertainty in the volume and size as well. We present shape models and volume for 41 asteroids. For 35 asteroids, the knowledge of their mass estimates from the literature allowed us to derive their bulk densities. We clearly see a trend of lower bulk densities for primitive objects (C-complex) than for S-complex asteroids. The range of densities in the X-complex is large, suggesting various compositions. Moreover, we identified a few objects with rather peculiar bulk densities, which is likely a hint of their poor mass estimates. Asteroid masses determined from the Gaia astrometric observations should further refine most of the density estimates.

A stellar occultation by a trans-Neptunian object (TNO) provides an opportunity to probe its size and shape. Very few occultations by TNOs have been sampled simultaneously from multiple locations, while a robust estimation of shadow size has been possible for only two objects. We present the first observation of an occultation by the TNO 2007 UK126 on 15 November 2014, measured by three observers, one nearly on and two almost symmetrical to the shadow's centerline. This is the first multi-chord dataset obtained for a so-called detached object, a TNO subgroup with perihelion distances so large that the giant planets have likely not perturbed their orbits. We revisit Herschel/PACS far-infrared data, applying a new reduction method to improve the accuracy of the measured fluxes. Combining both datasets allows us to comprehensively characterize 2007 UK126. We use error-in-variable regression to solve the non-linear problem of propagating timing errors into uncertainties of the ellipse parameters. Based on the shadow's size and a previously reported rotation period, we expect a shape of a Maclaurin spheroid and derive a geometrically plausible size range. To refine our size estimate of 2007 UK126, we model its thermal emission using a thermophysical model code. We conduct a parametric study to predict far-infrared fluxes and compare them to the Herschel/PACS measurements. The favorable geometry of our occultation chords, combined with minimal dead-time imaging, and precise GPS time measurements, allow for an accurate estimation of the shadow size (best-fitting ellipse with axes 645.80 $\pm$ 5.68 km $\times$ 597.81 $\pm$ 12.74 km) and the visual geometric albedo (15.0 $\pm$ 1.6 %). By combining our analyses of the occultation and the far-infrared data, we can constrain the effective diameter of 2007 UK126 to 599 - 629 km. We conclude that subsolar surface temperatures are $\approx$ 50 - 55 K.

We present results from a multi-chord Pluto stellar occultation observed on 29 June 2015 from New Zealand and Australia. This occurred only two weeks before the NASA New Horizons flyby of the Pluto system and serves as a useful comparison between ground-based and space results. We find that Pluto's atmosphere is still expanding, with a significant pressure increase of 5$\pm$2\% since 2013 and a factor of almost three since 1988. This trend rules out, as of today, an atmospheric collapse associated with Pluto's recession from the Sun. A central flash, a rare occurrence, was observed from several sites in New Zealand. The flash shape and amplitude are compatible with a spherical and transparent atmospheric layer of roughly 3~km in thickness whose base lies at about 4~km above Pluto's surface, and where an average thermal gradient of about 5 K~km$^{-1}$ prevails. We discuss the possibility that small departures between the observed and modeled flash are caused by local topographic features (mountains) along Pluto's limb that block the stellar light. Finally, using two possible temperature profiles, and extrapolating our pressure profile from our deepest accessible level down to the surface, we obtain a possible range of 11.9-13.7~$\mu$bar for the surface pressure.

Amateur contributions to professional publications have increased exponentially over the last decades in the field of Planetary Astronomy. Here we review the different domains of the field in which collaborations between professional and amateur astronomers are effective and regularly lead to scientific publications. We discuss the instruments, detectors, softwares and methodologies typically used by amateur astronomers to collect the scientific data in the different domains of interest. Amateur contributions to the monitoring of planets and interplanetary matter, characterization of asteroids and comets, as well as the determination of the physical properties of Kuiper Belt Objects and exoplanets are discussed.

On 2012 January 19, observers in the northeastern United States of America observed an occultation of 8.0-mag HIP 41337 star by the Jupiter-Trojan (911) Agamemnon, including one video recorded with a 36cm telescope that shows a deep brief secondary occultation that is likely due to a satellite, of about 5 km (most likely 3 to 10 km) across, at 278 km $\pm$ 5 km (0.0931 arcsec) from the asteroid's center as projected in the plane of the sky. A satellite this small and this close to the asteroid could not be resolved in the available VLT adaptive optics observations of Agamemnon recorded in 2003. The outline of Agamemnon is fit well by an ellipse with dimensions 190.6 $\pm$ 0.9 km by 143.8 $\pm$ 1.5 km. The angular diameter of HIP 41337 was found to be 0.5 $\pm$ 0.1 milli-arcsec. After (624) Hektor, this could be the second Jupiter Trojan asteroid known to possess a small satellite.

Asteroid sizes can be directly measured by observing occultations of stars by asteroids. When there are enough observations across the path of the shadow, the asteroid's projected silhouette can be reconstructed. Asteroid shape models derived from photometry by the lightcurve inversion method enable us to predict the orientation of an asteroid for the time of occultation. By scaling the shape model to fit the occultation chords, we can determine the asteroid size with a relative accuracy of typically ~ 10%. We combine shape and spin state models of 44 asteroids (14 of them are new or updated models) with the available occultation data to derive asteroid effective diameters. In many cases, occultations allow us to reject one of two possible pole solutions that were derived from photometry. We show that by combining results obtained from lightcurve inversion with occultation timings, we can obtain unique physical models of asteroids.