LCDM cosmological models with Early Dark Energy (EDE) have been proposed to resolve tensions between the Hubble constant H0 = 100h km/s/Mpc measured locally, giving h ~ 0.73, and H0 deduced from Planck cosmic microwave background (CMB) and other early universe measurements plus LCDM, giving h ~ 0.67. EDE models do this by adding a scalar field that temporarily adds dark energy equal to about 10% of the cosmological energy density at the end of the radiation-dominated era at redshift z ~ 3500. Here we compare linear and nonlinear predictions of a Planck-normalized LCDM model including EDE giving h = 0.728 with those of standard Planck-normalized LCDM with h = 0.678. We find that nonlinear evolution reduces the differences between power spectra of fluctuations at low redshifts. As a result, at z = 0 the halo mass functions on galactic scales are nearly the same, with differences only 1-2%. However, the differences dramatically increase at high redshifts. The EDE model predicts 50% more massive clusters at z = 1 and twice more galaxy-mass halos at z = 4. Even greater increases in abundances of galaxy-mass halos at higher redshifts may make it easier to reionize the universe with EDE. Predicted galaxy abundances and clustering will soon be tested by JWST observations. Positions of baryonic acoustic oscillations (BAOs) and correlation functions differ by about 2% between the models -- an effect that is not washed out by nonlinearities. Both standard LCDM and the EDE model studied here agree well with presently available acoustic-scale observations, but DESI and Euclid measurements will provide stringent new tests.

We study the effects of the local environmental density and the cosmic web environment (filaments, walls, and voids) on key properties of dark matter halos using the Bolshoi-Planck LCDM cosmological simulation. The z = 0 simulation is analysed into filaments, walls, and voids using the SpineWeb method and also the VIDE package of tools, both of which use the watershed transform. The key halo properties that we study are the specific mass accretion rate, spin parameter, concentration, prolateness, scale factor of the last major merger, and scale factor when the halo had half of its z = 0 mass. For all these properties, we find that there is no discernible difference between the halo properties in filaments, walls, or voids when compared at the same environmental density. As a result, we conclude that environmental density is the core attribute that affects these properties. This conclusion is in line with recent findings that properties of galaxies in redshift surveys are independent of their cosmic web environment at the same environmental density at z ~ 0. We also find that the local web environment of the Milky Way and the Andromeda galaxies near the centre of a cosmic wall does not appear to have any effect on the properties of these galaxies' dark matter halos except for their orientation, although we find that it is rather rare to have such massive halos near the centre of a relatively small cosmic wall.

We study the properties of distinct dark matter halos (i.e., those that are not subhalos) that have a final virial mass $M_{\mathrm{vir}}$ at $z = 0$ less than their peak mass ($M_{\mathrm{peak}}$) in the Bolshoi-Planck cosmological simulation. We identify two primary causes of halo mass loss: relaxation after a major merger and tidal stripping by a massive neighbouring halo. Major mergers initially boost $M_{\mathrm{vir}}$ and typically cause the final halo to become more prolate and less relaxed and to have higher spin and lower NFW concentration. As the halo relaxes, high energy material from the recent merger gradually escapes beyond the virial radius, temporarily resulting in a net negative accretion rate that reduces the halo mass by $5-15\%$ on average. Halos that experience a major merger around $z = 0.4$ typically reach a minimum mass near $z = 0$. Tidal stripping mainly occurs in dense regions, and it causes halos to become less prolate and have lower spins and higher NFW concentrations. Tidally stripped halos often lose a large fraction of their peak mass ($> 20\%$) and most never recover (or even reattain a positive accretion rate). Low mass halos can be strongly affected by both post-merger mass loss and tidal stripping, while high mass halos are predominantly influenced by post-merger mass loss and show few signs of significant tidal stripping.

We report and provide fitting functions for the abundance of dark matter halos and subhalos as a function of mass, circular velocity, and redshift from the new Bolshoi-Planck and MultiDark-Planck $\Lambda$CDM cosmological simulations, based on the Planck cosmological parameters. We also report the halo mass accretion rates, which may be connected with galaxy star formation rates. We show that the higher cosmological matter density of the Planck parameters compared with the WMAP parameters leads to higher abundance of massive halos at high redshifts. We find that the median halo spin parameter $\lambda_{\rm B} = J(2M_{\rm vir}R_{\rm vir}V_{\rm vir})^{-1}$ is nearly independent of redshift, leading to predicted evolution of galaxy sizes that is consistent with observations, while the significant decrease with redshift in median $\lambda_{\rm P} = J|E|^{-1/2}G^{-1}M^{-5/2}$ predicts more decrease in galaxy sizes than is observed. Using the Tully-Fisher and Faber-Jackson relations between galaxy velocity and mass, we show that a simple model of how galaxy velocity is related to halo maximum circular velocity leads to increasing overprediction of cosmic stellar mass density as redshift increases beyond redshifts $z\sim1$, implying that such velocity-mass relations must change at redshifts $z>1$. By making a realistic model of how observed galaxy velocities are related to halo circular velocity, we show that recent optical and radio observations of the abundance of galaxies are in good agreement with our $\Lambda$CDM simulations. Our halo demographics are based on updated versions of the \rockstar\ and \ctrees\ codes, and this paper includes appendices explaining all of their outputs. This paper is an introduction to a series of related papers presenting other analyses of the Bolshoi-Planck and MultiDark-Planck simulations.

We study how properties of discrete dark matter halos depend on halo environment, characterized by the mass density around the halos on scales from 0.5 to 16 $h^{-1}{\rm Mpc}$. We find that low mass halos (those less massive than the characteristic mass $M_{\rm C}$ of halos collapsing at a given epoch) in high-density environments have lower accretion rates, lower spins, higher concentrations, and rounder shapes than halos in median density environments. Halos in median and low-density environments have similar accretion rates and concentrations, but halos in low density environments have lower spins and are more elongated. Halos of a given mass in high-density regions accrete material earlier than halos of the same mass in lower-density regions. All but the most massive halos in high-density regions are losing mass (i.e., being stripped) at low redshifts, which causes artificially lowered NFW scale radii and increased concentrations. Tidal effects are also responsible for the decreasing spins of low mass halos in high density regions at low redshifts $z < 1$, by preferentially removing higher angular momentum material from halos. Halos in low-density regions have lower than average spins because they lack nearby halos whose tidal fields can spin them up. We also show that the simulation density distribution is well fit by an Extreme Value Distribution, and that the density distribution becomes broader with cosmic time.

A new class of geometric statistics for analyzing galaxy catalogs is presented. Filament statistics quantify filamentarity and planarity in large scale structure in a manner consistent with catalog visualizations. These statistics are based on sequences of spatial links which follow local high-density structures. From these link sequences we compute the discrete curvature, planarity, and torsion. Filament statistics are applied to CDM and CHDM ($\Omega_\nu = 0.3$) simulations of Klypin \etal (1996), the CfA1-like mock redshift catalogs of Nolthenius, Klypin and Primack (1994, 1996), and the CfA1 catalog. We also apply the moment-based shape statistics developed by Babul \& Starkman (1992), Luo \& Vishniac (1995), and Robinson \& Albrecht (1996) to these same catalogs, and compare their robustness and discriminatory power versus filament statistics. For 100 Mpc periodic simulation boxes ($H_0 = 50$ km s$^{-1}$ Mpc$^{-1}$), we find discrimination of $\sim 4\sigma$ (where $\sigma$ represents resampling errors) between CHDM and CDM for selected filament statistics and shape statistics, including variations in the galaxy identification scheme. Comparing the CfA1 data versus the models does not yield a conclusively favored model; no model is excluded at more than a $\sim 2\sigma$ level for any statistic, not including cosmic variance which could further degrade the discriminatory power. We find that CfA1 discriminates between models poorly mainly due to its sparseness and small number of galaxies, not due to redshift distortion, magnitude limiting, or geometrical effects. We anticipate that the proliferation of large redshift surveys and simulations will enable the statistics presented here to provide robust discrimination between large-scale structure in various cosmological models.

A new class of geometric statistics for analyzing galaxy catalogs is presented. {\it Filament statistics} quantify filamentarity and planarity in large scale structure in a manner consistent with catalog visualizations. These statistics are based on sequences of spatial links which follow local high-density structures. From these link sequences we compute the discrete curvature, planarity, and torsion. Filament statistics are applied to CDM and CHDM ($\Omega_\nu = 0.3$) simulations of Klypin \etal (1995), the CfA1-like sky catalogs of Nolthenius, Klypin and Primack (1994, 1995), and the CfA1 catalog. For 100 Mpc periodic simulation boxes ($H_0 = 50$ km s$^{-1}$ Mpc$^{-1}$), we find robust discrimination of over 4$\sigma$ (where $\sigma$ represents resampling errors) between CHDM and CDM. The {\it reduced filament statistics} show that CfA1 data is intermediate between CHDM and CDM, but more consistent with the CHDM models. Filament statistics provide robust and discriminatory shape statistics with which to test cosmological simulations of various models against present and future redshift survey data.