The Kepler mission observed many thousands of red giants. The long time series, some as long as the mission itself, have allowed us to study red giants with unprecedented detail. Given that red giants are intrinsically luminous, and hence can be observed from very large distances, knowing the properties of red giants, in particular ages, is of immense value for studies of the formation and evolution of the Galaxy, an endeavor known as "Galactic archaeology". In this article we review what we have learned about red giants using asteroseismic data. We start with the properties of the power spectrum and move on to internal structure and dynamics of these stars; we also touch upon unsolved issues in red-giant asteroseismology and the prospects of making further progress in understanding these stars.

Transport of angular momentum in stellar interiors is currently not well understood. Asteroseismology can provide us with estimates of internal rotation of stars and thereby advances our understanding of angular momentum transport. We can measure core-rotation rates in red-giant stars and we can place upper bounds on surface-rotation rates using measurements of dipole ($l=1$) modes. Here, we aim to determine the theoretical sensitivity of modes of different spherical degree towards the surface rotation. Additionally, we aim to identify modes that can potentially add sensitivity at intermediate radii. We used asteroseismic rotational inversions to probe the internal stellar rotation profiles in red-giant models from the base of the red-giant branch up to the luminosity bump. We used the inversion method of multiplicative optimally localised averages (MOLA) to assess how well internal and surface rotation rates can be recovered from different mode sets and different synthetic rotation profiles. We confirm that dipole mixed modes are sufficient to set constraints on the average core-rotation rates in red giants. However, surface-rotation rates estimated with only dipole mixed modes are contaminated by the core rotation. We show that the sensitivity to the surface rotation decreases from the base of the red-giant branch until it reaches a minimum at 0.6-0.8$L_\text{bump}$ due to a glitch in the buoyancy frequency. Thereafter a narrow range of increased surface sensitivity just below the bump luminosity exists. Quadrupole and octopole modes have more sensitivity in the outer parts of the star. If observed, quadrupole and octopole modes enable us to distinguish between differential and solid body rotation in the convection zone. To obtain accurate estimates of rotation rates at intermediate radii, acoustic oscillation modes with a spherical degree of $l\approx10$ are needed.

This paper documents the sixteenth data release (DR16) from the Sloan Digital Sky Surveys; the fourth and penultimate from the fourth phase (SDSS-IV). This is the first release of data from the southern hemisphere survey of the Apache Point Observatory Galactic Evolution Experiment 2 (APOGEE-2); new data from APOGEE-2 North are also included. DR16 is also notable as the final data release for the main cosmological program of the Extended Baryon Oscillation Spectroscopic Survey (eBOSS), and all raw and reduced spectra from that project are released here. DR16 also includes all the data from the Time Domain Spectroscopic Survey (TDSS) and new data from the SPectroscopic IDentification of ERosita Survey (SPIDERS) programs, both of which were co-observed on eBOSS plates. DR16 has no new data from the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey (or the MaNGA Stellar Library "MaStar"). We also preview future SDSS-V operations (due to start in 2020), and summarize plans for the final SDSS-IV data release (DR17).

Convective boundary mixing (CBM) is ubiquitous in stellar evolution. It is a necessary ingredient in the models in order to match observational constraints from clusters, binaries and single stars alike. We compute `effective overshoot' measures that reflect the extent of mixing and which can differ significantly from the input overshoot values set in the stellar evolution codes. We use constraints from pressure modes to infer the CBM properties of Kepler and CoRoT main-sequence and subgiant oscillators, as well as in two radial velocity targets (Procyon A and $\alpha$ Cen A). Collectively these targets allow us to identify how measurement precision, stellar spectral type, and overshoot implementation impact the asteroseismic solution. With these new measures we find that the `effective overshoot' for most stars is in line with physical expectations and calibrations from binaries and clusters. However, two F-stars in the CoRoT field (HD 49933 and HD 181906) still necessitate high overshoot in the models. Due to short mode lifetimes, mode identification can be difficult in these stars. We demonstrate that an incongruence between the radial and non-radial modes drives the asteroseismic solution to extreme structures with highly-efficient CBM as an inevitable outcome. Understanding the cause of seemingly anomalous physics for such stars is vital for inferring accurate stellar parameters from TESS data with comparable timeseries length.

Context. The large quantity of high-quality asteroseismic data that obtained from space-based photometric missions and the accuracy of the resulting frequencies motivate a careful consideration of the accuracy of computed oscillation frequencies of stellar models, when applied as diagnostics of the model properties. Aims. Based on models of red-giant stars that have been independently calculated using different stellar evolution codes, we investigate the extent to which the differences in the model calculation affect the model oscillation frequencies. Methods. For each of the models, which cover four different masses and different evolution stages on the red-giant branch, we computed full sets of low-degree oscillation frequencies using a single pulsation code and, from these frequencies, typical asteroseismic diagnostics. In addition, we carried out preliminary analyses to relate differences in the oscillation properties to the corresponding model differences. Results. In general, the differences in asteroseismic properties between the different models greatly exceed the observational precision of these properties, in particular for the nonradial modes whose mixed acoustic and gravity-wave character makes them sensitive to the structure of the deep stellar interior. In some cases, identifying these differences led to improvements in the final models presented here and in Paper I; here we illustrate particular examples of this. Conclusions. Further improvements in stellar modelling are required in order fully to utilise the observational accuracy to probe intrinsic limitations in the modelling. However, our analysis of the frequency differences and their relation to stellar internal properties provides a striking illustration of the potential of the mixed modes of red-giant stars for the diagnostics of stellar interiors.

The search for twins of the Sun and Earth relies on accurate characterization of stellar and exoplanetary parameters: i.e., ages, masses, and radii. In the modern era of asteroseismology, parameters of solar-like stars are derived by fitting theoretical models to observational data, which include measurements of their oscillation frequencies, metallicity [Fe/H], and effective temperature Teff. Combining this information with transit data furthermore yields the corresponding parameters for their exoplanets. While [Fe/H] and Teff are commonly stated to a precision of ~0.1 dex and ~100 K, the impact of errors in their measurement has not been studied in practice within the context of the parameters derived from them. Here we use the Stellar Parameters in an Instant (SPI) pipeline to estimate the parameters of nearly 100 stars observed by Kepler and Gaia, many of which are confirmed planet hosts. We adjust the reported spectroscopic measurements of these stars by introducing faux systematic errors and artificially increasing the reported uncertainties, and quantify the differences in the resulting parameters. We find that a systematic error of 0.1 dex in [Fe/H] translates to differences of only 4%, 2%, and 1% on average in the resulting stellar ages, masses, and radii, which are well within their uncertainties (~11%, 3.5%, 1.4%) as derived by SPI. We also find that increasing the uncertainty of [Fe/H] measurements by 0.1 dex increases the uncertainties by only 0.01 Gyr, 0.02 M_sun, and 0.01 R_sun, which are again well below their reported uncertainties (0.5 Gyr, 0.04 M_sun, 0.02 R_sun). The results for Teff at 100 K are similar. Stellar parameters from SPI are unchanged within uncertainties by errors of up to 0.14 dex or 175 K, and are even more robust to errors in Teff than the seismic scaling relations. Consequently, the parameters for their exoplanets are robust as well.

Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data

While long period variables (LPVs) have been extensively investigated, especially with MACHO and OGLE data for the Magellanic Clouds, there still exist open questions in their pulsations regarding the excitation mechanisms, radial order and angular degree assignment. Here, we perform asteroseismic analyses on LPVs observed by the 4-year Kepler mission. Using a cross-correlation method, we detect unambiguous pulsation ridges associated with radial fundamental modes ($n=1$) and overtones ($n\geqslant2$), where the radial order assignment is made by using theoretical frequencies and observed frequencies. Our results confirm that the amplitude variability seen in semiregulars is consistent with oscillations being solar-like. We identify that the dipole modes, $l=1$, are dominant in the radial orders of $3\leq n \leq6$, and that quadrupole modes, $l=2$, are dominant in the first overtone $n=2$. A test of seismic scaling relations using Gaia DR2 parallaxes reveals the possibility that the relations break down when $\nu_{\rm max}$ $\lesssim$ 3 $\mu$Hz (R $\gtrsim$ 40 R$_{\odot}$, or log $\rm L/L_{\odot}$ $\gtrsim$ 2.6). Our homogeneous measurements of pulsation amplitude and period for 3213 LPVs will be very valuable for probing effects of pulsation on mass loss, in particular in those stars with periods around 60 days, which has been argued as a threshold of substantial pulsation-triggered mass loss.

Rotation period measurements of stars observed with the Kepler mission have revealed a lack of stars at intermediate rotation periods, accompanied by a decrease of photometric variability. Whether this so-called dearth region is a peculiarity of stars in the Kepler field, or reflects a general manifestation of stellar magnetic activity, is still under debate. Our goal is to measure stellar rotation periods and photometric variabilities for tens of thousands of K2 stars, located in different fields along the ecliptic plane, to shed light on the relation between stellar rotation and photometric variability. We use Lomb-Scargle periodograms, auto-correlation and wavelet functions to determine consistent rotation periods. Stellar brightness variability is assessed by computing the variability range from the light curve. We further apply Gaussian mixture models to search for bimodality in the rotation period distribution. Combining measurements from all K2 campaigns, we detect rotation periods in 29,860 stars. For effective temperatures below 6000K, the variability range shows a local minimum at different periods, consistent with an isochrone age of 750 Myr. Additionally, the K2 rotation period distribution shows evidence for bimodality, although the dearth region is less pronounced compared to the Kepler field. The period at the dip of the bimodal distribution shows good agreement with the period at the local variability minimum. We conclude that the period bimodality is present in different fields of the sky, and is hence a general manifestation of stellar magnetic activity. The reduced variability in the dearth region is interpreted as a cancelation between dark spots and bright faculae. Our results strongly advocate that the role of faculae has been underestimated so far, suggesting a more complex dependence of the brightness variability on the rotation period.

We report the discovery of a warm sub-Saturn, TOI-257b (HD 19916b), based on data from NASA's Transiting Exoplanet Survey Satellite (TESS). The transit signal was detected by TESS and confirmed to be of planetary origin based on radial-velocity observations with the Minerva-Australis telescope array. An analysis of the TESS photometry, the Minerva-Australis, FEROS, and HARPS radial velocities, and the asteroseismic data of the stellar oscillations reveals that TOI-257b has a mass of $M_P=0.134^{+0.023}_{-0.022}$$\rm{M_J}$ ($42.6^{+7.3}_{-7.0}$$\rm{M_{\oplus}}$), a radius of $R_P=0.626^{+0.013}_{-0.012}$$\rm{R_J}$ ($7.02^{+0.15}_{-0.13}$$\rm{R_{\oplus}}$), and an orbit with eccentricity $0.242^{+0.040}_{-0.065}$ and period $18.38827\pm0.00072$$\rm{days}$. TOI-257b orbits a bright ($\mathrm{V}=7.570$mag) somewhat evolved late F-type star with $M_*=1.390\pm0.046$$\rm{M_{\odot}}$, $R_*=1.888\pm0.033$$\rm{R_{\odot}}$, $T_{\rm eff}=6075\pm90$$\rm{K}$, and $v\sin{i}=11.3\pm0.5$km/s. Additionally, we statistically validate a second non-transiting sub-Saturn mass planet on a $\sim71$day orbit using the radial velocity data. This system joins the ranks of a small number of exoplanet host stars that have been characterized with asteroseismology. Warm sub-Saturns are rare in the known sample of exoplanets, and thus the discovery of TOI-257b is important in the context of future work studying the formation and migration history of similar planetary systems.

The evolution of low-mass stars into red giants is still poorly understood. During this evolution the core of the star contracts and, simultaneously, the envelope expands -- a process known as the `mirror'. Additionally, there is a short phase where the trend for increasing luminosity is reversed. This is known as the red-giant-branch bump. We explore the underlying physical reasons for these two phenomena by considering the specific entropy distribution in the star and its temporal changes. We find that between the luminosity maximum and luminosity minimum of the bump there is no mirror present and the star is fully contracting. The contraction is halted and the star regains its mirror when the hydrogen-burning shell reaches the mean molecular weight discontinuity. This marks the luminosity minimum of the bump.

Over the course of its history, the Milky Way has ingested multiple smaller satellite galaxies. While these accreted stellar populations can be forensically identified as kinematically distinct structures within the Galaxy, it is difficult in general to precisely date the age at which any one merger occurred. Recent results have revealed a population of stars that were accreted via the collision of a dwarf galaxy, called \textit{Gaia}-Enceladus, leading to a substantial pollution of the chemical and dynamical properties of the Milky Way. Here, we identify the very bright, naked-eye star $\nu$\,Indi as a probe of the age of the early in situ population of the Galaxy. We combine asteroseismic, spectroscopic, astrometric, and kinematic observations to show that this metal-poor, alpha-element-rich star was an indigenous member of the halo, and we measure its age to be $11.0 \pm 0.7$ (stat) $\pm 0.8$ (sys)$\,\rm Gyr$. The star bears hallmarks consistent with it having been kinematically heated by the \textit{Gaia}-Enceladus collision. Its age implies that the earliest the merger could have begun was 11.6 and 13.2 Gyr ago at 68 and 95% confidence, respectively. Input from computations based on hierarchical cosmological models tightens (i.e. reduces) slightly the above limits.

(Abridged). We introduce the Aarhus Red Giants Challenge, a series of detailed comparisons between widely used stellar evolution and oscillation codes aiming at establishing the minimum level of uncertainties in properties of red giants arising solely from numerical implementations. Using 9 state-of-the-art stellar evolution codes, we defined a set of input physics and physical constants for our calculations and calibrated the convective efficiency to a specific point on the main sequence. We produced evolutionary tracks and stellar structure models at fixed radius along the red-giant branch for masses of 1.0 M$_\odot$, 1.5 M$_\odot$, 2.0 M$_\odot$, and 2.5 M$_\odot$, and compared the predicted stellar properties. Once models have been calibrated on the main sequence we find a residual spread in the predicted effective temperatures across all codes of ~20 K at solar radius and ~30-40 K in the RGB regardless of the considered stellar mass. The predicted ages show variations of 2-5% (increasing with stellar mass) which we track down to differences in the numerical implementation of energy generation. The luminosity of the RGB-bump shows a spread of about 10% for the considered codes, which translates into magnitude differences of ~0.1 mag in the optical V-band. We also compare the predicted [C/N] abundance ratio and found a spread of 0.1 dex or more for all considered masses. Our comparisons show that differences at the level of a few percent still remain in evolutionary calculations of red giants branch stars despite the use of the same input physics. These are mostly due to differences in the energy generation routines and interpolation across opacities, and call for further investigations on these matters in the context of using properties of red giants as benchmarks for astrophysical studies.

An increasingly popular method to determine stellar ages of red-giant stars for the purpose of Galactic archaeology is asteroseismic grid-based modelling (GBM). In asteroseismic GBM of red-giant stars with solar-like oscillations the large frequency separation ($\Delta\nu$) and the frequency of maximum oscillation power ($\nu_{\rm max}$) are commonly used asteroseismic observables, in addition to the usual spectroscopic parameters effective temperature ($T_{\rm eff}$) and metallicity ([Fe/H]). The precision with which $\Delta\nu$ and $\nu_{\rm max}$ can be determined largely depends on the length of the timeseries data (assuming the stars are bright enough that the oscillations can be detected). The question that we aim to answer here is: with what precision should [Fe/H] and $T_{\rm eff}$ be obtained to derive stellar ages of red-giant stars through asteroseismic GBM given the precision of $\Delta\nu$ and $\nu_{\rm max}$ that we can expect from the TESS data? In most cases presented here the value of $\sigma_{\rm age}$ shows only weak, or no, dependence on the uncertainties and biases in [Fe/H] and $T_{\rm eff}$ ingested in this study. Only in case a large ($>100$~K) $T_{\rm eff}$ biases is accompanied by a small (50 K) uncertainties in $T_{\rm eff}$ on the red-giant branch, $\Delta_{\rm age}$ is of the order of or larger than $\sigma_{\rm age}$ and in these cases we expect an impact of this bias on the resulting age estimate.

Theoretical models of stellar evolution predict that most of the lithium inside a star is destroyed as the star becomes a red giant. However, observations reveal that about 1% of red giants are peculiarly rich in lithium, often exceeding the amount in the interstellar medium or predicted from the Big Bang. With only about 150 lithium-rich giants discovered in the past four decades, and no distinguishing properties other than lithium enhancement, the origin of lithium-rich giant stars is one of the oldest problems in stellar astrophysics. Here we report the discovery of 2,330 low-mass (1 to 3$\,M_\odot$) lithium-rich giant stars, which we argue are consistent with internal lithium production that is driven by tidal spin-up by a binary companion. Our sample reveals that most lithium-rich giants have helium-burning cores ($80^{+7}_{-6}\%$), and that the frequency of lithium-rich giants rises with increasing stellar metallicity. We find that while planet accretion may explain some lithium-rich giants, it cannot account for the majority that have helium-burning cores. We rule out most other proposed explanations as the primary mechanism for lithium-rich giants, including all stages related to single star evolution. Our analysis shows that giants remain lithium-rich for only about two million years. A prediction from this lithium depletion timescale is that most lithium-rich giants with a helium-burning core have a binary companion.

The goal of stellar evolution theory is to predict the structure of stars throughout their lifetimes. Usually, these predictions can be assessed only indirectly, for example by comparing predicted and observed effective temperatures and luminosities. Thanks now to asteroseismology, which can reveal the internal structure of stars, it becomes possible to compare the predictions from stellar evolution theory to actual stellar structures. In this work, we present an inverse analysis of the oscillation data from the solar-type star KIC 6225718, which was observed by the \emph{Kepler} space observatory during its nominal mission. As its mass is about 20% greater than solar, this star is predicted to transport energy by convection in its nuclear-burning core. We find significant differences between the predicted and actual structure of the star in the radiative interior near to the convective core. In particular, the predicted sound speed is higher than observed in the deep interior of the star, and too low at a fractional radius of 0.25 and beyond. The cause of these discrepancies is unknown, and is not remedied by known physics in the form of convective overshooting or elemental diffusion.

The internal working of low-mass stars is of great significance to both the study of stellar structure and the history of the Milky Way. Asteroseismology has the power to directly sense the internal structure of stars and allows for the determination of the evolutionary state -- i.e. has helium burning commenced or is the energy generated only by the fusion in the hydrogen-burning shell? We use observational data from red-giant stars in a combination (known as APOKASC) of asteroseismology (from the \textit{Kepler} mission) and spectroscopy (from SDSS/APOGEE). The new feature of the analysis is that the APOKASC evolutionary state determination is based on the comparison of diverse approaches to the investigation of the frequency-power spectrum. The high level of agreement between the methods is a strong validation of the approaches. Stars for which there is not a consensus view are readily identified. The comparison also facilitates the identification of unusual stars including those that show evidence for very strong coupling between p and g cavities. The comparison between the classification based on the spectroscopic data and asteroseismic data have led to a new value for the statistical uncertainty in APOGEE temperatures. These consensus evolutionary states will be used as an input for methods that derive masses and ages for these stars based on comparison of observables with stellar evolutionary models (`grid-based modeling') and as a training set for machine-learning and other data-driven methods of evolutionary state determination

Galactic astrophysics is now in the process of building a multi-dimensional map of the Galaxy. For such a map, stellar ages are the essential ingredient. Ages are however measured only indirectly by comparing observational data with models. It is often difficult to provide a single age value for a given star, as several non-overlapping solutions are possible. We aim at recovering the underlying log(age) distribution from the measured log(age) probability density function for an arbitrary set of stars. We build an age inversion method, namely, we represent the measured log(age) probability density function as a weighted sum of probability density functions of mono-age populations. Weights in that sum give the underlying log(age) distribution. Mono-age populations are simulated so that the distribution of stars on the log g-[Fe/H] plane is close to that of the observed sample. We tested the age inversion method on simulated data, demonstrating that it is capable of properly recovering the true log(age) distribution for a large (N > 103) sample of stars. The method was further applied to large public spectroscopic surveys. For RAVE-on, LAMOST and APOGEE we also applied age inversion to mono-metallicity samples, successfully recovering age-metallicity trends present in higher-precision APOGEE data and chemical evolution models. We conclude that applying an age inversion method as presented in this work is necessary to recover the underlying age distribution of a large (N > 103 ) set of stars. These age distributions can be used to explore for instance age-metallicity relations.

The scaling relations for solar-like oscillations provide a translation of the features of the stochastic low-degree modes of oscillation in the Sun to predict the features of solar-like oscillations in other stars with convective outer layers. This prediction is based on their stellar mass, radius and effective temperature. Over time, the original scaling relations have been reversed in their use from predicting features of solar-like oscillations to deriving stellar parameters. Updates to the scaling relations as well as their reference values have been proposed to accommodate for the different requirements set by the change in their use. In this review the suggestions for improving the accuracy of the estimates of stellar parameters through the scaling relations for solar-like oscillations are presented together with a discussion of pros and cons of different approaches.

The next decade affords tremendous opportunity to achieve the goals of Galactic archaeology. That is, to reconstruct the evolutionary narrative of the Milky Way, based on the empirical data that describes its current morphological, dynamical, temporal and chemical structures. Here, we describe a path to achieving this goal. The critical observational objective is a Galaxy-scale, contiguous, comprehensive mapping of the disk's phase space, tracing where the majority of the stellar mass resides. An ensemble of recent, ongoing, and imminent surveys are working to deliver such a transformative stellar map. Once this empirical description of the dust-obscured disk is assembled, we will no longer be operationally limited by the observational data. The primary and significant challenge within stellar astronomy and Galactic archaeology will then be in fully utilizing these data. We outline the next-decade framework for obtaining and then realizing the potential of the data to chart the Galactic disk via its stars. One way to support the investment in the massive data assemblage will be to establish a Galactic Archaeology Consortium across the ensemble of stellar missions. This would reflect a long-term commitment to build and support a network of personnel in a dedicated effort to aggregate, engineer, and transform stellar measurements into a comprehensive perspective of our Galaxy.

The problem of the origin of the elements is a fundamental one in astronomy and one that has many open questions. Prominent examples include (1) the nature of Type Ia supernovae and the timescale of their contributions; (2) the observational identification of elements such as titanium and potassium with the $\alpha$-elements in conflict with core-collapse supernova predictions; (3) the number and relative importance of r-process sites; (4) the origin of carbon and nitrogen and the influence of mixing and mass loss in winds; and (5) the origin of the intermediate elements, such as Cu, Ge, As, and Se, that bridge the region between charged-particle and neutron-capture reactions. The next decade will bring to maturity many of the new tools that have recently made their mark, such as large-scale chemical cartography of the Milky Way and its satellites, the addition of astrometric and asteroseismic information, the detection and characterization of gravitational wave events, 3-D simulations of convection and model atmospheres, and improved laboratory measurements for transition probabilities and nuclear masses. All of these areas are key for continued improvement, and such improvement will benefit many areas of astrophysics.

The stellar inclination angle-the angle between the rotation axis of a star and our line of sight-provides valuable information in many different areas, from the characterisation of the geometry of exoplanetary and eclipsing binary systems, to the formation and evolution of those systems. We propose a method based on asteroseismology and a Bayesian hierarchical scheme for extracting the inclination angle of a single star. This hierarchical method therefore provides a means to both accurately and robustly extract inclination angles from red giant stars. We successfully apply this technique to an artificial dataset with an underlying isotropic inclination angle distribution to verify the method. We also apply this technique to 123 red giant stars observed with $\textit{Kepler}$. We also show the need for a selection function to account for possible population-level biases, that are not present in individual star-by-star cases, in order to extend the hierarchical method towards inferring underlying population inclination angle distributions.

A small set of chemically old stars that appear young by their independently derived masses has been detected. These are so-called $\alpha$-rich young stars. For a sample of 51 red-giant stars, for which spectra are available from SDSS/APOGEE and masses are available from asteroseismic measures based on \textit{Kepler} lightcurves, we derive the C, N and O abundances through an independent analysis. These stars span a wide range of N/C surface number density ratios. We interpret the high-mass stars with low N/C as being products of mergers or mass transfer during or after first dredge up, because the dredge-up features are the same as for low-mass stars. The $\alpha$-rich young stars with high N/C follow the expected trend of N/C for their mass, and could be either genuine young stars (leaving their high [$\alpha$/Fe] unexplained) or the results of mergers on the main sequence.

KOI-3890 is a highly eccentric, 153-day period eclipsing, single-lined spectroscopic binary system containing a red-giant star showing solar-like oscillations alongside tidal interactions. The combination of transit photometry, radial velocity observations, and asteroseismology have enabled the detailed characterisation of both the red-giant primary and the M-dwarf companion, along with the tidal interaction and the geometry of the system. The stellar parameters of the red-giant primary are determined through the use of asteroseismology and grid-based modelling to give a mass and radius of $M_{\star}=1.04\pm0.06\;\textrm{M}_{\odot}$ and $R_{\star}=5.8\pm0.2\;\textrm{R}_{\odot}$ respectively. When combined with transit photometry the M-dwarf companion is found to have a mass and radius of $M_{\mathrm{c}}=0.23\pm0.01\;\textrm{M}_{\odot}$ and $R_{\mathrm{c}}=0.256\pm0.007\;\textrm{R}_{\odot}$. Moreover, through asteroseismology we constrain the age of the system through the red-giant primary to be $9.1^{+2.4}_{-1.7}\;\mathrm{Gyr}$. This provides a constraint on the age of the M-dwarf secondary, which is difficult to do for other M-dwarf binary systems. In addition, the asteroseismic analysis yields an estimate of the inclination angle of the rotation axis of the red-giant star of $i=87.6^{+2.4}_{-1.2}$ degrees. The obliquity of the system\textemdash the angle between the stellar rotation axis and the angle normal to the orbital plane\textemdash is also derived to give $\psi=4.2^{+2.1}_{-4.2}$ degrees showing that the system is consistent with alignment. We observe no radius inflation in the M-dwarf companion when compared to current low-mass stellar models.

We present the discovery of TOI-197.01, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. TOI-197 (HIP116158) is a bright (V=8.2 mag), spectroscopically classified subgiant which oscillates with an average frequency of about 430 muHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2-minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (2.943+/-0.064 Rsun), mass (1.212 +/- 0.074 Msun) and age (4.9+/-1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (9.17+/-0.33 Rearth) with an orbital period of ~14.3 days, irradiance of 343+/-24 Fearth, moderate mass (60.5 +/- 5.7 Mearth) and density (0.431+/-0.062 gcc). The properties of TOI-197.01 show that the host-star metallicity - planet mass correlation found in sub-Saturns (4-8 Rearth) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ~15%, TOI-197.01 is one of the best characterized Saturn-sized planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology.

Asteroseismology is the only observational tool in astronomy that can probe the interiors of stars, and is a benchmark method for deriving fundamental properties of stars and exoplanets. Over the coming decade, space-based and ground-based observations will provide a several order of magnitude increase of solar-like oscillators, as well as a dramatic increase in the number and quality of classical pulsator observations, providing unprecedented possibilities to study stellar physics and galactic stellar populations. In this white paper, we describe key science questions and necessary facilities to continue the asteroseismology revolution into the 2020's.

Context: The study of stellar structure and evolution depends crucially on accurate stellar parameters. The photometry from space telescopes has provided superb data that allowed asteroseismic characterisation of thousands of stars. However, typical targets of space telescopes are rather faint and complementary measurements are difficult to obtain. On the other hand, the brightest, otherwise well-studied stars, are lacking seismic characterization. Aims: Our goal is to use the granulation and/or oscillation time scales measured from photometric time series of bright red giants (1.6$\leq$Vmag$\leq$5.3) observed with BRITE to determine stellar surface gravities and masses. Methods: We use probabilistic methods to characterize the granulation and/or oscillation signal in the power density spectra and the autocorrelation function of the BRITE time series. Results: We detect a clear granulation and/or oscillation signal in 23 red giant stars and extract the corresponding time scales from the power density spectra as well as the autocorrelation function of the BRITE time series. To account for the recently discovered non-linearity of the classical seismic scaling relations, we use parameters from a large sample of Kepler stars to re-calibrate the scalings of the high- and low-frequency components of the granulation signal. We develop a method to identify which component is measured if only one granulation component is statistically significant in the data. We then use the new scalings to determine the surface gravity of our sample stars, finding them to be consistent with those determined from the autocorrelation signal of the time series. We further use radius estimates from the literature to determine the stellar masses of our sample stars from the measured surface gravities. We also define a statistical measure for the evolutionary stage of the stars.

Context. Large spectroscopic surveys open the way to explore our Galaxy. In order to use the data from these surveys to understand the Galactic stellar population, we need to be sure that stars contained in a survey are a representative subset of the underlying population. Without the selection function taken into account, the results might reflect the properties of the selection function rather than those of the underlying stellar population. Aims. In this work, we introduce a method to estimate the selection function for a given spectroscopic survey. We apply this method to a large sample of public spectroscopic surveys. Methods. We apply a median division binning algorithm to bin observed stars in the colour-magnitude space. This approach produces lower uncertainties and lower biases of the selection function estimate as compared to traditionally used 2D-histograms. We run a set of simulations to verify the method and calibrate the one free parameter it contains. These simulations allow us to test the precision and accuracy of the method. Results. We produce and publish estimated values and uncertainties of selection functions for a large sample of public spectroscopic surveys. We publicly release the code used to produce the selection function estimates. Conclusions. The effect of the selection function on distance modulus and metallicity distributions of stars in surveys is important for surveys with small and largely inhomogeneous spatial coverage. For surveys with contiguous spatial coverage the effect of the selection function is almost negligible.

The study of stellar activity cycles is crucial to understand the underlying dynamo and how it causes activity signatures such as dark spots and bright faculae. We study the appearance of activity signatures in contemporaneous photometric and chromospheric time series. Lomb-Scargle periodograms are used to search for cycle periods present in both time series. To emphasize the signature of the activity cycle we account for rotation-induced scatter in both data sets by fitting a quasi-periodic Gaussian process model to each observing season. After subtracting the rotational variability, cycle amplitudes and the phase difference between the two time series are obtained by fitting both time series simultaneously using the same cycle period. We find cycle periods in 27 of the 30 stars in our sample. The phase difference between the two time series reveals that the variability in fast rotating active stars is usually in anti-phase, while the variability of slowly rotating inactive stars is in phase. The photometric cycle amplitudes are on average six times larger for the active stars. The phase and amplitude information demonstrates that active stars are dominated by dark spots, whereas less active stars are dominated by bright faculae. We find the transition from spot to faculae domination at the Vaughan-Preston gap, and around a Rossby number equal to one. We conclude that faculae are the dominant ingredient of stellar activity cycles at ages >2.55 Gyr. The data further suggest that the Vaughan-Preston gap can not explain the previously detected dearth of Kepler rotation periods between 15-25 days. Nevertheless, our results led us to propose an explanation for the rotation period dearth to be due to the non-detection of periodicity caused by the cancellation of dark spots and bright faculae at 800 Myr.

In cases where both components of a binary system show oscillations, asteroseismology has been proposed as a method to identify the system. For KIC 2568888, observed with $Kepler$, we detect oscillation modes for two red giants in a single power density spectrum. Through an asteroseismic study we investigate if the stars have similar properties, which could be an indication that they are physically bound into a binary system. While one star lies on the red giant branch (RGB), the other, more evolved star, is either a RGB or asymptotic-giant-branch star. We found similar ages for the red giants and a mass ratio close to 1. Based on these asteroseismic results we propose KIC 2568888 as a rare candidate binary system ($\sim 0.1\%$ chance). However, when combining the asteroseismic data with ground-based $BVI$ photometry we estimated different distances for the stars, which we cross-checked with $Gaia$ DR2. From $Gaia$ we obtained for one object a distance between and broadly consistent with the distances from $BVI$ photometry. For the other object we have a negative parallax with a not yet reliable $Gaia$ distance solution. The derived distances challenge a binary interpretation and may either point to a triple system, which could explain the visible magnitudes, or, to a rare chance alignment ($\sim 0.05\%$ chance based on stellar magnitudes). This probability would even be smaller, if calculated for close pairs of stars with a mass ratio close to unity in addition to similar magnitudes, which may indeed indicate that a binary scenario is more favourable.

Detecting the presence and characteristic scale of a signal is a common problem in data analysis. We develop a fast statistical test of the null hypothesis that a Fourier-like power spectrum is consistent with noise. The null hypothesis is rejected where the local "coefficient of variation" (CV)---the ratio of the standard deviation to the mean---in a power spectrum deviates significantly from expectations for pure noise (CV~1.0 for a Chi^2 2-degrees-of-freedom distribution). This technique is of particular utility for detecting signals in power spectra with frequency-dependent noise backgrounds, as it is only sensitive to features that are sharp relative to the inspected frequency bin width. We develop a CV-based algorithm to quickly detect the presence of solar-like oscillations in photometric power spectra that are dominated by stellar granulation. This approach circumvents the need for background fitting to measure the frequency of maximum solar-like oscillation power, nu_max. In this paper, we derive the basic method and demonstrate its ability to detect the pulsational power excesses from the well-studied APOKASC-2 sample of oscillating red giants observed by Kepler. We recover the cataloged nu_max values with an average precision of 2.7% for 99.4% of the stars with 4 years of Kepler photometry. Our method produces false positives for <1% of dwarf stars with nu_max well above the long-cadence Nyquist frequency. The algorithm also flags spectra that exhibit astrophysically interesting signals in addition to single, solar-like oscillation power excesses, which we catalog as part of our characterization of the Kepler light curves of APOKASC-2 targets.

We report 20 new lithium-rich giants discovered within the Gaia-ESO Survey, including the first Li-rich giant with evolutionary stage confirmed by CoRoT data. Atmospheric parameters and abundances were derived in model atmosphere analyses using medium-resolution GIRAFFE or high-resolution UVES spectra. These results are part of the fifth internal data release of Gaia-ESO. The Li abundances were corrected for non-LTE effects. We used Gaia DR2 parallaxes to estimate distances and luminosities. The giants have A(Li) > 2.2 dex. The majority of them (14 out of 20 stars) are in the CoRoT fields. Four giants are located in the field of three open clusters but are not members. Two giants were observed in fields towards the Galactic bulge but are likely in the inner disk. One of the bulge field giants is super Li-rich with A(Li) = 4.0 dex. We identified one giant with infrared excess at 22 microns. Two other giants, with large vsin i, might be Li-rich because of planet engulfment. Another giant is found to be barium enhanced and thus could have accreted material from a former AGB companion. Otherwise, besides the Li enrichment, the evolutionary stages are the only other connection between these new Li-rich giants. The CoRoT data confirm that one Li-rich giant is at the core-He burning stage. The other giants are concentrated in close proximity to the RGB luminosity bump, the core-He burning stages, or the early-AGB. This is very clear when looking at the Gaia-based luminosities of the Li-rich giants. This is also seen when the CoRoT Li-rich giants are compared to a larger sample of 2252 giants observed in the CoRoT fields by the Gaia-ESO Survey, which are distributed all over the RGB in the Teff-logg diagram. These observations show that evolutionary stage is a major factor behind the Li enrichment in giants. Other processes, like planet accretion, contribute to a smaller scale. [abridged]

The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since July 2014. This paper describes the second data release from this phase, and the fourteenth from SDSS overall (making this, Data Release Fourteen or DR14). This release makes public data taken by SDSS-IV in its first two years of operation (July 2014-2016). Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey (eBOSS); the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data driven machine learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS website (www.sdss.org) has been updated for this release, and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020, and will be followed by SDSS-V.

The internal structures and properties of oscillating red-giant stars can be accurately inferred through their global oscillation modes (asteroseismology). Based on 1460 days of Kepler observations we perform a thorough asteroseismic study to probe the stellar parameters and evolutionary stages of three red giants in eclipsing binary systems. We present the first detailed analysis of individual oscillation modes of the red-giant components of KIC 8410637, KIC5640750 and KIC9540226. We obtain estimates of their asteroseismic masses, radii, mean densities and logarithmic surface gravities by using the asteroseismic scaling relations as well as grid-based modelling. As these red giants are in double-lined eclipsing binaries, it is possible to derive their independent dynamical masses and radii from the orbital solution and compare it with the seismically inferred values. For KIC 5640750 we compute the first spectroscopic orbit based on both components of this system. We use high-resolution spectroscopic data and light curves of the three systems to determine up-to-date values of the dynamical stellar parameters. With our comprehensive set of stellar parameters we explore consistencies between binary analysis and asteroseismic methods, and test the reliability of the well-known scaling relations. For the three red giants under study, we find agreement between dynamical and asteroseismic stellar parameters in cases where the asteroseismic methods account for metallicity, temperature and mass dependence as well as surface effects. We are able to attain agreement from the scaling laws in all three systems if we use $\Delta\nu_{\rm ref,emp} = 130.8 \pm 0.9\,\mu$Hz instead of the usual solar reference value.

Individual mode frequencies have been detected in thousands of individual solar-like oscillators on the red giant branch (RGB). Fitting stellar models to these mode frequencies, however, is more difficult than in main-sequence stars. This is partly because of the uncertain magnitude of the surface effect: the systematic difference between observed and modelled frequencies caused by poor modelling of the near-surface layers. We aim to study the magnitude of the surface effect in RGB stars. Surface effect corrections used for main-sequence targets are potentially large enough to put the non-radial mixed modes in RGB stars out of order, which is unphysical. Unless this can be circumvented, model-fitting of evolved RGB stars is restricted to the radial modes, which reduces the number of available modes. Here, we present a method to suppress gravity modes (g-modes) in the cores of our stellar models, so that they have only pure pressure modes (p-modes). We show that the method gives unbiased results and apply it to three RGB solar-like oscillators in double-lined eclipsing binaries: KIC 8410637, KIC 9540226 and KIC 5640750. In all three stars, the surface effect decreases the model frequencies consistently by about 0.1--0.3 $\mu$Hz at the frequency of maximum oscillation power $\nu_\mathrm{max}$, which agrees with existing predictions from three-dimensional radiation hydrodynamics simulations. Though our method in essence discards information about the stellar cores, it provides a useful step forward in understanding the surface effect in RGB stars.

We present a catalog of stellar properties for a large sample of 6676 evolved stars with APOGEE spectroscopic parameters and \textit{Kepler} asteroseismic data analyzed using five independent techniques. Our data includes evolutionary state, surface gravity, mean density, mass, radius, age, and the spectroscopic and asteroseismic measurements used to derive them. We employ a new empirical approach for combining asteroseismic measurements from different methods, calibrating the inferred stellar parameters, and estimating uncertainties. With high statistical significance, we find that asteroseismic parameters inferred from the different pipelines have systematic offsets that are not removed by accounting for differences in their solar reference values. We include theoretically motivated corrections to the large frequency spacing ($\Delta \nu$) scaling relation, and we calibrate the zero point of the frequency of maximum power ($\nu_{\rm max}$) relation to be consistent with masses and radii for members of star clusters. For most targets, the parameters returned by different pipelines are in much better agreement than would be expected from the pipeline-predicted random errors, but 22\% of them had at least one method not return a result and a much larger measurement dispersion. This supports the usage of multiple analysis techniques for asteroseismic stellar population studies. The measured dispersion in mass estimates for fundamental calibrators is consistent with our error model, which yields median random and systematic mass uncertainties for RGB stars of order 4\%. Median random and systematic mass uncertainties are at the 9\% and 8\% level respectively for RC stars.

Context. Currently galactic exploration is being revolutionized by a flow of new data: Gaia provides measurements of stellar distances and kinematics; growing numbers of spectroscopic surveys provide values of stellar atmospheric parameters and abundances of elements; and Kepler and K2 missions provide asteroseismic information for an increasing number of stars. Aims. In this work we aim to determine stellar distances and ages using Gaia and spectrophotometric data in a consistent way. We estimate precisions of age and distance determinations with Gaia end-of-mission and TGAS parallax precisions. Methods. To this end we incorporated parallax and extinction data into the isochrone fitting method used in the Unified tool to estimate Distances, Ages, and Masses (UniDAM). We prepared datasets that allowed us to study the improvement of distance and age estimates with the inclusion of TGAS and Gaia end-of-mission parallax precisions in isochrone fitting. Results. Using TGAS parallaxes in isochrone fitting we are able to reduce distance and age estimate uncertainties for TGAS stars for distances up to 1 kpc by more than one third, compared to results based only on spectrophotometric data. With Gaia end-of-mission parallaxes in isochrone fitting we will be able to further decrease our distance uncertainties by about a factor of 20 and age uncertainties by a factor of two for stars up to 10 kpc away from the Sun. Conclusions. We demonstrate that we will be able to improve our distance estimates for about one third of stars in spectroscopic surveys and to decrease log(age) uncertainties by about a factor of two for over 80% of stars as compared to the uncertainties obtained without parallax priors using Gaia end-of-mission parallaxes consistently with spectrophotometry in isochrone fitting .

Space observatories such as $\textit{Kepler}$ have provided data that can potentially revolutionise our understanding of stars. Through detailed asteroseismic analyses we are capable of determining fundamental stellar parameters and reveal the stellar internal structure with unprecedented accuracy. However, such detailed analyses, known as peak bagging, have so far been obtained for only a small percentage of the observed stars while most of the scientific potential of the available data remains unexplored. One of the major challenges in peak bagging is identifying how many solar-like oscillation modes are visible in a power density spectrum. Identification of oscillation modes is usually done by visual inspection which is time-consuming and has a degree of subjectivity. Here, we present a peak detection algorithm specially suited for the detection of solar-like oscillations. It reliably characterises the solar-like oscillations in a power density spectrum and estimates their parameters without human intervention. Furthermore, we provide a metric to characterise the false positive and false negative rates to provide further information about the reliability of a detected oscillation mode or the significance of a lack of detected oscillation modes. The algorithm presented here opens the possibility for detailed and automated peak bagging of the thousands of solar-like oscillators observed by $\textit{Kepler}$.

The wealth of asteroseismic data for red-giant stars and the precision with which these data have been observed over the last decade calls for investigations to further understand the internal structures of these stars. The aim of this work is to validate a method to measure the underlying period spacing, coupling term and mode offset of pure gravity modes that are present in the deep interiors of red-giant stars. We subsequently investigate the physical conditions of the evanescent zone between the gravity mode cavity and the pressure mode cavity. We implement an alternative mathematical description to analyse observational data and to extract the underlying physical parameters that determine the frequencies of mixed modes. This description takes the radial order of the modes explicitly into account, which reduces its sensitivity to aliases. Additionally, and for the first time, this method allows us to constrain the gravity mode offset for red-giant stars. We determine the period spacing and the coupling term for the dipole modes within a few percent of literature values. Additionally, we find that the gravity mode offset varies on a star by star basis and should not be kept fixed in the analysis. Furthermore, we find that the coupling factor is logarithmically related to the physical width of the evanescent region normalised by the radius at which the evanescent zone is located. Finally, the local density contrast at the edge of the core of red giant branch models shows a tentative correlation with the offset. (abstract abriged)

We present a method for measuring internal stellar structure based on asteroseismology that we call "inversions for agreement." The method accounts for imprecise estimates of stellar mass and radius as well as the relatively limited oscillation mode sets that are available for distant stars. By construction, the results of the method are independent of stellar models. We apply this method to measure the isothermal sound speeds in the cores of the solar-type stars 16 Cyg A and B using asteroseismic data obtained from Kepler observations. We compare the asteroseismic structure that we deduce against best-fitting evolutionary models and find that the sound speeds in the cores of these stars exceed those of the models.

SDSS-V will be an all-sky, multi-epoch spectroscopic survey of over six million objects. It is designed to decode the history of the Milky Way, trace the emergence of the chemical elements, reveal the inner workings of stars, and investigate the origin of planets. It will also create an integral-field spectroscopic map of the gas in the Galaxy and the Local Group that is 1,000x larger than the current state of the art and at high enough spatial resolution to reveal the self-regulation mechanisms of galactic ecosystems. SDSS-V will pioneer systematic, spectroscopic monitoring across the whole sky, revealing changes on timescales from 20 minutes to 20 years. The survey will thus track the flickers, flares, and radical transformations of the most luminous persistent objects in the universe: massive black holes growing at the centers of galaxies. The scope and flexibility of SDSS-V will be unique among extant and future spectroscopic surveys: it is all-sky, with matched survey infrastructures in both hemispheres; it provides near-IR and optical multi-object fiber spectroscopy that is rapidly reconfigurable to serve high target densities, targets of opportunity, and time-domain monitoring; and it provides optical, ultra-wide-field integral field spectroscopy. SDSS-V, with its programs anticipated to start in 2020, will be well-timed to multiply the scientific output from major space missions (e.g., TESS, Gaia, eROSITA) and ground-based projects. SDSS-V builds on the 25-year heritage of SDSS's advances in data analysis, collaboration infrastructure, and product deliverables. The project is now refining its science scope, optimizing the survey strategies, and developing new hardware that builds on the SDSS-IV infrastructure. We present here an overview of the current state of these developments as we seek to build our worldwide consortium of institutional and individual members.

Red-giant stars are low- to intermediate-mass ($M \lesssim 10$~M$_{\odot}$) stars that have exhausted hydrogen in the core. These extended, cool and hence red stars are key targets for stellar evolution studies as well as galactic studies for several reasons: a) many stars go through a red-giant phase; b) red giants are intrinsically bright; c) large stellar internal structure changes as well as changes in surface chemical abundances take place over relatively short time; d) red-giant stars exhibit global intrinsic oscillations. Due to their large number and intrinsic brightness it is possible to observe many of these stars up to large distances. Furthermore, the global intrinsic oscillations provide a means to discern red-giant stars in the pre-helium core burning from the ones in the helium core burning phase and provide an estimate of stellar ages, a key ingredient for galactic studies. In this lecture I will first discuss some physical phenomena that play a role in red-giant stars and several phases of red-giant evolution. Then, I will provide some details about asteroseismology -- the study of the internal structure of stars through their intrinsic oscillations -- of red-giant stars. I will conclude by discussing galactic archaeology -- the study of the formation and evolution of the Milky Way by reconstructing its past from its current constituents -- and the role red-giant stars can play in that.

(Abridged) We present the first APOKASC catalog of spectroscopic and asteroseismic data for 415 dwarfs and subgiants. Asteroseismic data have been obtained by Kepler in short cadence. The spectroscopic parameters are based on spectra taken as part of APOGEE and correspond to DR13 of SDSS. We analyze our data using two Teff scales, the spectroscopic values from DR13 and those derived from SDSS griz photometry. We use the differences in our results arising from these choices as a test of systematic Teff, and find that they can lead to significant differences in the derived stellar properties. Determinations of surface gravity ($\log{g}$), mean density ($\rho$), radius ($R$), mass ($M$), and age ($\tau$) for the whole sample have been carried out with stellar grid-based modeling. We have assessed random and systematic error sources in the spectroscopic and seismic data, as well as in the grid-based modeling determination of the stellar quantities in the catalog. We provide stellar properties for both Teff scales. The median combined (random and systematic) uncertainties are 2% (0.01 dex; $\log{g}$), 3.4% ($\rho$), 2.6% ($R$), 5.1% ($M$), and 19% ($\tau$) for the photometric Teff scale and 2% ($\log{g}$), 3.5% ($\rho$), 2.7% ($R$), 6.3% ($M$), and 23% ($\tau$) for the spectroscopic scale. Comparisons with stellar quantities in the catalog by Chaplin et al.(2014) highlight the importance of metallicity measurements for determining stellar parameters accurately. We compare our results with those from other sources, including stellar radii determined from TGAS parallaxes and asteroseismic analyses based on individual frequencies. We find a very good agreement in all cases. Comparisons give strong support to the determination of stellar quantities based on global seismology, a relevant result for future missions such as TESS and PLATO. Table 5 corrected (wrongly listed SDSS Teff before).

The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) began observations in July 2014. It pursues three core programs: APOGEE-2, MaNGA, and eBOSS. In addition, eBOSS contains two major subprograms: TDSS and SPIDERS. This paper describes the first data release from SDSS-IV, Data Release 13 (DR13), which contains new data, reanalysis of existing data sets and, like all SDSS data releases, is inclusive of previously released data. DR13 makes publicly available 1390 spatially resolved integral field unit observations of nearby galaxies from MaNGA, the first data released from this survey. It includes new observations from eBOSS, completing SEQUELS. In addition to targeting galaxies and quasars, SEQUELS also targeted variability-selected objects from TDSS and X-ray selected objects from SPIDERS. DR13 includes new reductions of the SDSS-III BOSS data, improving the spectrophotometric calibration and redshift classification. DR13 releases new reductions of the APOGEE-1 data from SDSS-III, with abundances of elements not previously included and improved stellar parameters for dwarf stars and cooler stars. For the SDSS imaging data, DR13 provides new, more robust and precise photometric calibrations. Several value-added catalogs are being released in tandem with DR13, in particular target catalogs relevant for eBOSS, TDSS, and SPIDERS, and an updated red-clump catalog for APOGEE. This paper describes the location and format of the data now publicly available, as well as providing references to the important technical papers that describe the targeting, observing, and data reduction. The SDSS website, http://www.sdss.org, provides links to the data, tutorials and examples of data access, and extensive documentation of the reduction and analysis procedures. DR13 is the first of a scheduled set that will contain new data and analyses from the planned ~6-year operations of SDSS-IV.

Deciphering the assembly history of the Milky Way is a formidable task, which becomes possible only if one can produce high-resolution chrono-chemo-kinematical maps of the Galaxy. Data from large-scale astrometric and spectroscopic surveys will soon provide us with a well-defined view of the current chemo-kinematical structure of the Milky Way, but will only enable a blurred view on the temporal sequence that led to the present-day Galaxy. As demonstrated by the (ongoing) exploitation of data from the pioneering photometric missions CoRoT, Kepler, and K2, asteroseismology provides the way forward: solar-like oscillating giants are excellent evolutionary clocks thanks to the availability of seismic constraints on their mass and to the tight age-initial-mass relation they adhere to. In this paper we identify five key outstanding questions relating to the formation and evolution of the Milky Way that will need precise and accurate ages for large samples of stars to be addressed, and we identify the requirements in terms of number of targets and the precision on the stellar properties that are needed to tackle such questions. By quantifying the asteroseismic yields expected from PLATO for red-giant stars, we demonstrate that these requirements are within the capabilities of the current instrument design, provided that observations are sufficiently long to identify the evolutionary state and allow robust and precise determination of acoustic-mode frequencies. This will allow us to harvest data of sufficient quality to reach a 10% precision in age. This is a fundamental pre-requisite to then reach the more ambitious goal of a similar level of accuracy, which will only be possible if we have to hand a careful appraisal of systematic uncertainties on age deriving from our limited understanding of stellar physics, a goal which conveniently falls within the main aims of PLATO's core science.

Galactic archaeology - the study of the formation and evolution of the Milky Way by reconstructing its past from its current constituents - requires precise and accurate knowledge of stellar parameters for as many stars as possible. To achieve this a number of large spectroscopic surveys have been undertaken and are still ongoing. So far consortia carrying out the different spectroscopic surveys have used different tools to determine stellar parameters of stars from their derived effective temperatures (Teff), surface gravities (log g) and metallicities ([Fe/H]) possibly combined with photometric, astrometric, interferometric or asteroseismic information. Here we aim to homogenise the stellar characterisation by applying a unified tool to a large set of publicly available spectrophotometric data. We use spectroscopic data from a variety of large surveys combined with infra-red photometry from 2MASS and AllWISE and compare these in a Bayesian manner with PARSEC isochrones to derive probability density functions (PDFs) for stellar masses, ages and distances. We treat PDFs of pre-helium-core burning, helium-core burning and post helium-core burning solutions as well as different peaks in multi-modal PDFs (i.e. each unimodal sub-PDF) of the different evolutionary phases separately. For over 2.5 million stars we report mass, age and distance estimate for each evolutionary phase and unimodal sub-PDF. We report Gaussian, skewed Gaussian, truncated Gaussian, modified truncated exponential distribution or truncated Student's t-distribution functions to represent each sub-PDF, allowing to reconstruct detailed PDFs. Comparisons with stellar parameter estimates from the literature show good agreement within uncertainties. We present UniDAM - the unified tool applicable to spectrophotometric data of different surveys to obtain a homogenised set of stellar parameters.

The frequencies of oscillation modes in stars contain valuable information about the stellar properties. In red giants the frequency spectrum also contains mixed modes, with both pressure (p) and gravity (g) as restoring force, which are key to understanding the physical conditions in the stellar core. We observe a high fraction of red giants in binary systems, for which g-dominated mixed modes are not pronounced. This trend leads us to investigate whether this is specific for binary systems or a more general feature. We do so by comparing the fraction of stars with only p-dominated mixed modes in binaries and in a larger set of stars from the APOKASC sample. We find only p-dominated mixed modes in about 50% of red giants in detached eclipsing binaries compared to about 4% in the large sample. This could indicate that this phenomenon is tightly related to binarity and that the binary fraction in the APOKASC sample is about 8%.

The masses and radii of solar-like oscillators can be estimated through the asteroseismic scaling relations. These relations provide a direct link between observables, i.e. effective temperature and characteristics of the oscillation spectra, and stellar properties, i.e. mean density and surface gravity (thus mass and radius). These scaling relations are commonly used to characterize large samples of stars. Usually, the Sun is used as a reference from which the structure is scaled. However, for stars that do not have a similar structure as the Sun, using the Sun as a reference introduces systematic errors as large as 10\% in mass and 5\% in radius. Several alternatives for the reference of the scaling relation involving the large frequency separation (typical frequency difference between modes of the same degree and consecutive radial order) have been suggested in the literature. In a previous paper, we presented a reference function with a dependence on both effective temperature and metallicity. The accuracy of predicted masses and radii improved considerably when using reference values calculated from our reference function. However, the residuals indicated that stars on the red-giant branch possess a mass dependence that was not accounted for. Here, we present a reference function for the scaling relation involving the large frequency separation that includes the mass dependence. This new reference function improves the derived masses and radii significantly by removing the systematic differences and mitigates the trend with $\nu_{\rm max}$ (frequency of maximum oscillation power) that exists when using the solar value as a reference.

With the advent of dedicated photometric space missions, the ability to rapidly process huge catalogues of stars has become paramount. Bellinger and Angelou et al. (2016) recently introduced a new method based on machine learning for inferring the stellar parameters of main-sequence stars exhibiting solar-like oscillations. The method makes precise predictions that are consistent with other methods, but with the advantages of being able to explore many more parameters while costing practically no time. Here we apply the method to 52 so-called "LEGACY" main-sequence stars observed by the Kepler space mission. For each star, we present estimates and uncertainties of mass, age, radius, luminosity, core hydrogen abundance, surface helium abundance, surface gravity, initial helium abundance, and initial metallicity as well as estimates of their evolutionary model parameters of mixing length, overshooting coefficient, and diffusion multiplication factor. We obtain median uncertainties in stellar age, mass, and radius of 14.8%, 3.6%, and 1.7%, respectively. The source code for all analyses and for all figures appearing in this manuscript can be found electronically at: https://github.com/earlbellinger/asteroseismology

From its surface properties it can be difficult to determine whether a red-giant star is in its helium-core-burning phase or only burning hydrogen in a shell around an inert helium core. Stars in either of these stages can have similar effective temperatures, radii and hence luminosities, i.e. they can be located at the same position in the Hertzsprung-Russell diagram. Asteroseismology -- the study of the internal structure of stars through their global oscillations -- can provide the necessary additional constraints to determine the evolutionary states of red-giant stars. Here, we present a method that uses grid-based modelling based on global asteroseismic properties ($\nu_{\rm max}$, frequency of maximum oscillation power; and $\Delta\nu$, frequency spacing between modes of the same degree and consecutive radial orders) as well as effective temperature and metallicity to determine the evolutionary phases. This method is applicable even to timeseries data of limited length, although with a small fraction of miss-classifications.

The internal properties of stars in the red-giant phase undergo significant changes on relatively short timescales. Long near-uninterrupted high-precision photometric timeseries observations from dedicated space missions such as CoRoT and Kepler have provided seismic inferences of the global and internal properties of a large number of evolved stars, including red giants. These inferences are confronted with predictions from theoretical models to improve our understanding of stellar structure and evolution. Our knowledge and understanding of red giants have indeed increased tremendously using these seismic inferences, and we anticipate that more information is still hidden in the data. Unraveling this will further improve our understanding of stellar evolution. This will also have significant impact on our knowledge of the Milky Way Galaxy as well as on exo-planet host stars. The latter is important for our understanding of the formation and structure of planetary systems.

In the updated APOGEE-Kepler catalog, we have asteroseismic and spectroscopic data for over 3000 first ascent red giants. Given the size and accuracy of this sample, these data offer an unprecedented test of the accuracy of stellar models on the post-main-sequence. When we compare these data to theoretical predictions, we find a metallicity dependent temperature offset with a slope of around 100 K per dex in metallicity. We find that this effect is present in all model grids tested and that theoretical uncertainties in the models, correlated spectroscopic errors, and shifts in the asteroseismic mass scale are insufficient to explain this effect. Stellar models can be brought into agreement with the data if a metallicity dependent convective mixing length is used, with $ \Delta\alpha_{\rm ML, YREC} \sim 0.2$ per dex in metallicity, a trend inconsistent with the predictions of three dimensional stellar convection simulations. If this effect is not taken into account, isochrone ages for red giants from the Gaia data will be off by as much as a factor of 2 even at modest deviations from solar metallicity ([Fe/H]=$-$0.5).

Astronomy is in an era where all-sky surveys are mapping the Galaxy. The plethora of photometric, spectroscopic, asteroseismic and astrometric data allows us to characterise the comprising stars in detail. Here we quantify to what extent precise stellar observations reveal information about the properties of a star, including properties that are unobserved, or even unobservable. We analyse the diagnostic potential of classical and asteroseismic observations for inferring stellar parameters such as age, mass and radius from evolutionary tracks of solar-like oscillators on the lower main sequence. We perform rank correlation tests in order to determine the capacity of each observable quantity to probe structural components of stars and infer their evolutionary histories. We also analyse the principal components of classic and asteroseismic observables to highlight the degree of redundancy present in the measured quantities and demonstrate the extent to which information of the model parameters can be extracted. We perform multiple regression using combinations of observable quantities in a grid of evolutionary simulations and appraise the predictive utility of each combination in determining the properties of stars. We identify the combinations that are useful and provide limits to where each type of observable quantity can reveal information about a star. We investigate the accuracy with which targets in the upcoming TESS and PLATO missions can be characterized. We demonstrate that the combination of observations from GAIA and PLATO will allow us to tightly constrain stellar masses, ages and radii with machine learning for the purposes of Galactic and planetary studies.

Determining the ages of red-giant stars is a key problem in stellar astrophysics. One of the difficulties in this determination is to know the evolutionary state of the individual stars -- i.e. have they started to burn Helium in their cores? That is the topic of this paper. Asteroseismic data provide a route to achieving this information. What we present here is an highly autonomous way of determining the evolutionary state from an analysis of the power spectrum of the light curve. The method is fast and efficient and can provide results for a large number of stars. It uses the structure of the dipole-mode oscillations, which have a mixed character in red-giant stars, to determine some measures that are used in the categorisation. It does not require that all the individual components of any given mode be separately characterised. Some 6604 red giant stars have been classified. Of these 3566 are determined to be on the red-giant branch, 2077 are red-clump and 439 are secondary-clump stars. We do not specifically identify the low metallicity, horizontal-branch stars. The difference between red-clump and secondary-clump stars is dependent on the manner in which Helium burning is first initiated. We discuss that the way the boundary between these classifications is set may lead to mis-categorisation in a small number of stars. The remaining 522 stars were not classified either because they lacked sufficient power in the dipole modes (so-called depressed dipole modes) or because of conflicting values in the parameters.

Binary star systems are important for understanding stellar structure and evolution, and are especially useful when oscillations can be detected and analysed with asteroseismology. However, only four systems are known in which solar-like oscillations are detected in both components. Here, we analyse the fifth such system, HD 176465, which was observed by Kepler. We carefully analysed the system's power spectrum to measure individual mode frequencies, adapting our methods where necessary to accommodate the fact that both stars oscillate in a similar frequency range. We also modelled the two stars independently by fitting stellar models to the frequencies and complementary parameters. We are able to cleanly separate the oscillation modes in both systems. The stellar models produce compatible ages and initial compositions for the stars, as is expected from their common and contemporaneous origin. Combining the individual ages, the system is about 3.0$\pm$0.5 Gyr old. The two components of HD 176465 are young physically-similar oscillating solar analogues, the first such system to be found, and provide important constraints for stellar evolution and asteroseismology.

We report on the discovery of a planetary companion candidate with a minimum mass Msini = 4.6 M_J orbiting the K2 III giant star HD 175370 (KIC 007940959). This star was a target in our program to search for planets around a sample of 95 giant stars observed with Kepler. This detection was made possible using precise stellar radial velocity measurements of HD 175370 taken over five years and four months using the coude echelle spectrograph of the 2-m Alfred Jensch Telescope and the fibre-fed echelle spectrograph HERMES of the 1.2-m Mercator Telescope. Our radial velocity measurements reveal a periodic (349.5 days) variation with a semi-amplitude K = 133 m/s, superimposed on a long-term trend. A low-mass stellar companion with an orbital period of ~88 years in a highly eccentric orbit and a planet in a Keplerian orbit with an eccentricity e = 0.22 are the most plausible explanation of the radial velocity variations. However, we cannot exclude the existence of stellar envelope pulsations as a cause for the low-amplitude radial velocity variations and only future continued monitoring of this system may answer this uncertainty. From Kepler photometry we find that HD 175370 is most likely a low-mass red-giant branch or asymptotic-giant branch star.

Evaporating rocky exoplanets, such as KIC 12557548b, eject large amounts of dust grains, which can trail the planet in a comet-like tail. When such objects occult their host star, the resulting transit signal contains information about the dust in the tail. We aim to use the detailed shape of the Kepler light curve of KIC 12557548b to constrain the size and composition of the dust grains that make up the tail, as well as the mass loss rate of the planet. Using a self-consistent numerical model of the dust dynamics and sublimation, we calculate the shape of the tail by following dust grains from their ejection from the planet to their destruction due to sublimation. From this dust cloud shape, we generate synthetic light curves (incorporating the effects of extinction and angle-dependent scattering), which are then compared with the phase-folded Kepler light curve. We explore the free-parameter space thoroughly using a Markov chain Monte Carlo method. Our physics-based model is capable of reproducing the observed light curve in detail. Good fits are found for initial grain sizes between 0.2 and 5.6 micron and dust mass loss rates of 0.6 to 15.6 M_earth/Gyr (2-sigma ranges). We find that only certain combinations of material parameters yield the correct tail length. These constraints are consistent with dust made of corundum (Al2O3), but do not agree with a range of carbonaceous, silicate, or iron compositions. Using a detailed, physically motivated model, it is possible to constrain the composition of the dust in the tails of evaporating rocky exoplanets. This provides a unique opportunity to probe to interior composition of the smallest known exoplanets.

With the advent of the space missions CoRoT and Kepler, it has become feasible to determine precise asteroseismic masses and ages for large samples of red-giant stars. In this paper, we present the CoRoGEE dataset -- obtained from CoRoT lightcurves for 606 red giant stars in two fields of the Galactic disc which have been co-observed for an ancillary project of APOGEE. We have used the Bayesian parameter estimation code PARAM to calculate distances, extinctions, masses, and ages for these stars in a homogeneous analysis, resulting in relative statistical uncertainties of $\sim2\%$ in distance, $\sim4\%$ in radius, $\sim9\%$ in mass and $\sim25\%$ in age. We also assess systematic age uncertainties due to different input physics and mass loss. We discuss the correlation between ages and chemical abundance patterns of field stars over a large radial range of the Milky Way's disc (5 kpc $<R_{\rm Gal}<$ 14 kpc), focussing on the [$\alpha$/Fe]-[Fe/H]-age plane in five radial bins of the Galactic disc. We find an overall agreement with the expectations of chemical-evolution models computed before the present data were available, especially for the outer regions. However, our data also indicate that a significant fraction of stars now observed near and beyond the Solar Neighbourhood migrated from inner regions. Mock CoRoGEE observations of a chemo-dynamical Milky Way disc model show that the number of high-metallicity stars in the outer disc is too high to be accounted for even by the strong radial mixing present in the model. The mock observations also reveal that the age distribution of the [$\alpha$/Fe]-enhanced sequence in the CoRoGEE inner-disc field is much broader than expected from a combination of radial mixing and observational errors. We suggest that a thick disc/bulge component that formed stars for more than 3 Gyr may account for these discrepancies.

Context. The APOGEE survey has obtained high-resolution infrared spectra of more than 100,000 stars. Deriving chemical abundances patterns of these stars is paramount to piecing together the structure of the Milky Way. While the derived chemical abundances have been shown to be precise for most stars, some calibration problems have been reported, in particular for more metal- poor stars. Aims. In this paper, we aim to (1) re-determine the chemical abundances of the APOGEE+Kepler stellar sample (APOKASC) with an independent procedure, line list and line selection, and high quality surface gravity information from astroseismology, and (2) extend the abundance catalogue by including abundances that are not currently reported in the most recent APOGEE release (DR12). Methods. We fixed the Teff and log g to those determined using spectrophotometric and asteroseismic techniques, respectively. We made use of the Brussels Automatic Stellar Parameter (BACCHUS) code to derive the metallicity and broadening parameters for the APOKASC sample. In addition, we derived differential abundances with respect to Arcturus. Results. We have validated the BACCHUS code on APOGEE data using several well-known stars, and stars from open and globular clusters. We also provide the abundances of C, N, O, Mg, Ca, Si, Ti, S, Al, Na, Ni, Mn, Fe, K, P, Cr, Co, Cu, Rb, Yb and V for every star, line, and show the impact of line selection on the final abundances. These include abundances of five new elements and improved abundances for Si, Ti, S, and V. Conclusions. In this paper, we present an independent analysis of the APOKASC sample and provide abundances of up to 21 elements. This catalogue can be used not only to study chemical abundance patterns of the Galaxy but also to train data driven spectral approaches which can improve the abundance precision in a restricted dataset, but also full APOGEE sample.

Owing to the remarkable photometric precision of space observatories like Kepler, stellar and planetary systems beyond our own are now being characterized en masse for the first time. These characterizations are pivotal for endeavors such as searching for Earth-like planets and solar twins, understanding the mechanisms that govern stellar evolution, and tracing the dynamics of our Galaxy. The volume of data that is becoming available, however, brings with it the need to process this information accurately and rapidly. While existing methods can constrain fundamental stellar parameters such as ages, masses, and radii from these observations, they require substantial computational efforts to do so. We develop a method based on machine learning for rapidly estimating fundamental parameters of main-sequence solar-like stars from classical and asteroseismic observations. We first demonstrate this method on a hare-and-hound exercise and then apply it to the Sun, 16 Cyg A & B, and 34 planet-hosting candidates that have been observed by the Kepler spacecraft. We find that our estimates and their associated uncertainties are comparable to the results of other methods, but with the additional benefit of being able to explore many more stellar parameters while using much less computation time. We furthermore use this method to present evidence for an empirical diffusion-mass relation. Our method is open source and freely available for the community to use. The source code for all analyses and for all figures appearing in this manuscript can be found electronically at https://github.com/earlbellinger/asteroseismology

$\theta$ Cygni is an F3 spectral-type main-sequence star with visual magnitude V=4.48. This star was the brightest star observed by the original Kepler spacecraft mission. Short-cadence (58.8 s) photometric data using a custom aperture were obtained during Quarter 6 (June-September 2010) and subsequently in Quarters 8 and 12-17. We present analyses of the solar-like oscillations based on Q6 and Q8 data, identifying angular degree $l$ = 0, 1, and 2 oscillations in the range 1000-2700 microHz, with a large frequency separation of 83.9 plus/minus 0.4 microHz, and frequency with maximum amplitude 1829 plus/minus 54 microHz. We also present analyses of new ground-based spectroscopic observations, which, when combined with angular diameter measurements from interferometry and Hipparcos parallax, give T_eff = 6697 plus/minus 78 K, radius 1.49 plus/minus 0.03 solar radii, [Fe/H] = -0.02 plus/minus 0.06 dex, and log g = 4.23 plus/minus 0.03. We calculate stellar models matching the constraints using several methods, including using the Yale Rotating Evolution Code and the Asteroseismic Modeling Portal. The best-fit models have masses 1.35-1.39 solar masses and ages 1.0-1.6 Gyr. theta Cyg's T_eff and log g place it cooler than the red edge of the gamma Doradus instability region established from pre-Kepler ground-based observations, but just at the red edge derived from pulsation modeling. The pulsation models show gamma Dor gravity-mode pulsations driven by the convective-blocking mechanism, with frequencies of 1 to 3 cycles/day (11 to 33 microHz). However, gravity modes were not detected in the Kepler data, one signal at 1.776 cycles/day (20.56 microHz) may be attributable to a faint, possibly background, binary. Asteroseismic studies of theta Cyg and other A-F stars observed by Kepler and CoRoT, will help to improve stellar model physics and to test pulsation driving mechanisms.

Red giant stars are perhaps the most important type of stars for Galactic and extra-galactic archaeology: they are luminous, occur in all stellar populations, and their surface temperatures allow precise abundance determinations for many different chemical elements. Yet, the full star formation and enrichment history of a galaxy can be traced directly only if two key observables can be determined for large stellar samples - age and chemical composition. While spectroscopy is a powerful method to analyse the detailed abundances of stars, stellar ages are the "missing link in the chain", since they are not a direct observable. However, spectroscopy should be able to estimate stellar masses, which for red giants directly infer ages provided their chemical composition is known. Here we establish a new empirical relation between the shape of the hydrogen line in the observed spectra of red giants and stellar mass determined from asteroseismology. The relation allows to determine stellar masses and ages with the accuracy of 10-15%. The method can be used with confidence for stars in the following range of stellar parameters: 4000 < Teff < 5000 K, 0.5 < log g < 3.5, -2.0 < [Fe/H] < 0.3, and luminosities log L/LSun < 2.5. Our analysis provides observational evidence that the Halpha spectral characteristics of red giant stars are tightly correlated with their mass and therefore their age. We also show that the method samples well all stellar populations with ages above 1 Gyr. Targeting bright giants, the method allows to obtain simultaneous age and chemical abundance information far deeper than would be possible with asteroseismology, extending the possible survey volume to remote regions of the Milky Way and even to neighbouring galaxies like Andromeda or the Magellanic Clouds already with present instrumentation, like VLT and Keck facilities.

The scaling relations between global asteroseismic observables and stellar properties are widely used to estimate masses and radii of stars exhibiting solar-like oscillations. Since the mass and radius of the Sun are known independently, the Sun is commonly used as a reference to scale to. However, the validity of the scaling relations depends on the homology between the star under study and the reference star. Solar-like oscillators span a wide range of masses and metallicities, as well as evolutionary phases. Most of these stars are therefore not homologous to the Sun. This leads to errors of up to 10% (5%) in mass (radius) when using the asteroseismic scaling relations with the Sun as the reference. In this paper we derive a reference function to replace the solar-reference value used in the large-frequency-separation scaling relation. Our function is the first that depends on both effective temperature and metallicity, and is applicable from the end of the main sequence to just above the bump on the red giant branch. This reference function improves the estimates of masses and radii determined through scaling relations by a factor of 2, i.e. allows masses and radii to be recovered with an accuracy of 5% and 2%, respectively.

In this brief communication we provide the rationale for, and the outcome of the International Astronomical Union (IAU) resolution vote at the XXIX-th General Assembly in Honolulu, Hawaii, in 2015, on recommended nominal conversion constants for selected solar and planetary properties. The problem addressed by the resolution is a lack of established conversion constants between solar and planetary values and SI units: a missing standard has caused a proliferation of solar values (e.g., solar radius, solar irradiance, solar luminosity, solar effective temperature and solar mass parameter) in the literature, with cited solar values typically based on best estimates at the time of paper writing. As precision of observations increases, a set of consistent values becomes increasingly important. To address this, an IAU Working Group on Nominal Units for Stellar and Planetary Astronomy formed in 2011, uniting experts from the solar, stellar, planetary, exoplanetary and fundamental astronomy, as well as from general standards fields to converge on optimal values for nominal conversion constants. The effort resulted in the IAU 2015 Resolution B3, passed at the IAU General Assembly by a large majority. The resolution recommends the use of nominal solar and planetary values, which are by definition exact and are expressed in SI units. These nominal values should be understood as conversion factors only, not as the true solar/planetary properties or current best estimates. Authors and journal editors are urged to join in using the standard values set forth by this resolution in future work and publications to help minimize further confusion.

Context: Detailed oscillation spectra comprising individual frequencies for numerous solar-type stars and red giants are or will become available. These data can lead to a precise characterisation of stars. Aims: Our goal is to test and compare different methods for obtaining stellar properties from oscillation frequencies and spectroscopic constraints, in order to evaluate their accuracy and the reliability of the error bars. Methods: In the context of the SpaceInn network, we carried out a hare-and-hounds exercise in which one group produced "observed" oscillation spectra for 10 artificial solar-type stars, and various groups characterised these stars using either forward modelling or acoustic glitch signatures. Results: Results based on the forward modelling approach were accurate to 1.5 % (radius), 3.9 % (mass), 23 % (age), 1.5 % (surface gravity), and 1.8 % (mean density). For the two 1 Msun stellar targets, the accuracy on the age is better than 10 % thereby satisfying PLATO 2.0 requirements. The average accuracies for the acoustic radii of the base of the convection zone, the He II ionisation, and the Gamma_1 peak were 17 %, 2.4 %, and 1.9 %, respectively. Glitch fitting analysis seemed to be affected by aliasing problems for some of the targets. Conclusions: Forward modelling is the most accurate approach, but needs to be complemented by model-independent results from, e.g., glitch analysis. Furthermore, global optimisation algorithms provide more robust error bars.

Simulations predict that hot super-Earth sized exoplanets can have their envelopes stripped by photo-evaporation, which would present itself as a lack of these exoplanets. However, this absence in the exoplanet population has escaped a firm detection. Here we demonstrate, using asteroseismology on a sample of exoplanets and exoplanet candidates observed during the Kepler mission that, while there is an abundance of super-Earth sized exoplanets with low incident fluxes, none are found with high incident fluxes. We do not find any exoplanets with radii between 2.2 and 3.8 Earth radii with incident flux above 650 times the incident flux on Earth. This gap in the population of exoplanets is explained by evaporation of volatile elements and thus supports the predictions. The confirmation of a hot-super-Earth desert caused by evaporation will add an important constraint on simulations of planetary systems, since they must be able to reproduce the dearth of close-in super-Earths.

The angle $\psi$ between a planet's orbital axis and the spin axis of its parent star is an important diagnostic of planet formation, migration, and tidal evolution. We seek empirical constraints on $\psi$ by measuring the stellar inclination $i_{\rm s}$ via asteroseismology for an ensemble of 25 solar-type hosts observed with NASA's Kepler satellite. Our results for $i_{\rm s}$ are consistent with alignment at the 2-$\sigma$ level for all stars in the sample, meaning that the system surrounding the red-giant star Kepler-56 remains as the only unambiguous misaligned multiple-planet system detected to date. The availability of a measurement of the projected spin-orbit angle $\lambda$ for two of the systems allows us to estimate $\psi$. We find that the orbit of the hot-Jupiter HAT-P-7b is likely to be retrograde ($\psi=116.4^{+30.2}_{-14.7}\:{\rm deg}$), whereas that of Kepler-25c seems to be well aligned with the stellar spin axis ($\psi=12.6^{+6.7}_{-11.0}\:{\rm deg}$). While the latter result is in apparent contradiction with a statement made previously in the literature that the multi-transiting system Kepler-25 is misaligned, we show that the results are consistent, given the large associated uncertainties. Finally, we perform a hierarchical Bayesian analysis based on the asteroseismic sample in order to recover the underlying distribution of $\psi$. The ensemble analysis suggests that the directions of the stellar spin and planetary orbital axes are correlated, as conveyed by a tendency of the host stars to display large inclination values.

In this paper we study the dynamics of the stellar interior of the early red-giant star KIC 4448777 by asteroseismic inversion of 14 splittings of the dipole mixed modes obtained from {\it Kepler} observations. In order to overcome the complexity of the oscillation pattern typical of red-giant stars, we present a procedure which involves a combination of different methods to extract the rotational splittings from the power spectrum. We find not only that the core rotates faster than the surface, confirming previous inversion results generated for other red giants (Deheuvels et al. 2012,2014), but we also estimate the variation of the angular velocity within the helium core with a spatial resolution of $\Delta r=0.001R$ and verify the hypothesis of a sharp discontinuity in the inner stellar rotation (Deheuvels et al. 2014). The results show that the entire core rotates rigidly with an angular velocity of about $\langle\Omega_c/2\pi\rangle=748\pm18$~nHz and provide evidence for an angular velocity decrease through a region between the helium core and part of the hydrogen burning shell; however we do not succeed to characterize the rotational slope, due to the intrinsic limits of the applied techniques. The angular velocity, from the edge of the core and through the hydrogen burning shell, appears to decrease with increasing distance from the center, reaching an average value in the convective envelope of $\langle\Omega_s/2\pi\rangle=68\pm22$~nHz. Hence, the core in KIC~4448777 is rotating from a minimum of 8 to a maximum of 17 times faster than the envelope. We conclude that a set of data which includes only dipolar modes is sufficient to infer quite accurately the rotation of a red giant not only in the dense core but also, with a lower level of confidence, in part of the radiative region and in the convective envelope.

\Kepler has revolutionised our understanding of both exoplanets and their host stars. Asteroseismology is a valuable tool in the characterisation of stars and \Kepler is an excellent observing facility to perform asteroseismology. Here we select a sample of 35 \Kepler solar-type stars which host transiting exoplanets (or planet candidates) with detected solar-like oscillations. Using available \Kepler short cadence data up to Quarter 16 we create power spectra optimised for asteroseismology of solar-type stars. We identify modes of oscillation and estimate mode frequencies by ``peak bagging'' using a Bayesian MCMC framework. In addition, we expand the methodology of quality assurance using a Bayesian unsupervised machine learning approach. We report the measured frequencies of the modes of oscillation for all 35 stars and frequency ratios commonly used in detailed asteroseismic modelling. Due to the high correlations associated with frequency ratios we report the covariance matrix of all frequencies measured and frequency ratios calculated. These frequencies, frequency ratios, and covariance matrices can be used to obtain tight constraint on the fundamental parameters of these planet-hosting stars.

Asteroseismology allows for deriving precise values of surface gravity of stars. The accurate asteroseismic determinations now available for large number of stars in the Kepler fields can be used to check and calibrate surface gravities that are currently being obtained spectroscopically for a huge numbers of stars targeted by large-scale spectroscopic surveys, such as the on-going Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) Galactic survey. The LAMOST spectral surveys have obtained a large number of stellar spectra in the Kepler fields. Stellar atmospheric parameters of those stars have been determined with the LAMOST Stellar Parameter Pipeline at Peking University (LSP3), by template matching with the MILES empirical spectral library. In the current work, we compare surface gravities yielded by LSP3 with those of two asteroseismic samples - the largest sample from Huber et al. (2014) and the most accurate sample from Hekker et al. (2012, 2013). We find that LSP3 surface gravities are in good agreement with asteroseismic values of Hekker et al. (2012, 2013), with a dispersion of about 0.2 dex. Except for a few cases, asteroseismic surface gravities of Huber et al. (2014) and LSP3 spectroscopic values agree for a wide range of surface gravities. However, some patterns of differences can be identified upon close inspection. Potential ways to further improve the LSP3 spectroscopic estimation of stellar atmospheric parameters in the near future are briefly discussed. The effects of effective temperature and metallicity on asteroseismic determinations of surface gravities for giant stars are also discussed.

The XXIXth IAU General Assembly in Honolulu adopted IAU 2015 Resolution B2 on recommended zero points for the absolute and apparent bolometric magnitude scales. The resolution was proposed by the IAU Inter-Division A-G Working Group on Nominal Units for Stellar and Planetary Astronomy after consulting with a broad spectrum of researchers from the astronomical community. Resolution B2 resolves the long-standing absence of an internationally-adopted zero point for the absolute and apparent bolometric magnitude scales. Resolution B2 defines the zero point of the absolute bolometric magnitude scale such that a radiation source with $M_{\rm Bol}$ = 0 has luminosity L$_{\circ}$ = 3.0128e28 W. The zero point of the apparent bolometric magnitude scale ($m_{\rm Bol}$ = 0) corresponds to irradiance $f_{\circ}$ = 2.518021002e-8 W/m$^2$. The zero points were chosen so that the nominal solar luminosity (3.828e26 W) adopted by IAU 2015 Resolution B3 corresponds approximately to $M_{\rm Bol}$(Sun) = 4.74, the value most commonly adopted in recent literature. The nominal total solar irradiance (1361 W/m$^2$) adopted in IAU 2015 Resolution B3 corresponds approximately to apparent bolometric magnitude $m_{\rm bol}$(Sun) = -26.832. Implicit in the IAU 2015 Resolution B2 definition of the apparent bolometric magnitude scale is an exact definition for the parsec (648000/$\pi$ au) based on the IAU 2012 Resolution B2 definition of the astronomical unit.

Astronomers commonly quote the properties of celestial objects in units of parameters for the Sun, Jupiter, or the Earth. The resolution presented here was proposed by the IAU Inter-Division Working Group on Nominal Units for Stellar and Planetary Astronomy and passed by the XXIXth IAU General Assembly in Honolulu. IAU 2015 Resolution B3 adopts a set of nominal solar, terrestrial, and jovian conversion constants for stellar and (exo)planetary astronomy which are defined to be exact SI values. While the nominal constants are based on current best estimates (CBEs; which have uncertainties, are not secularly constant, and are updated regularly using new observations), they should be interpreted as standard values and not as CBEs. IAU 2015 Resolution B3 adopts five solar conversion constants (nominal solar radius, nominal total solar irradiance, nominal solar luminosity, nominal solar effective temperature, and nominal solar mass parameter) and six planetary conversion constants (nominal terrestrial equatorial radius, nominal terrestrial polar radius, nominal jovian equatorial radius, nominal jovian polar radius, nominal terrestrial mass parameter, and nominal jovian mass parameter).

The Apache Point Observatory Galactic Evolution Experiment (APOGEE), one of the programs in the Sloan Digital Sky Survey III (SDSS-III), has now completed its systematic, homogeneous spectroscopic survey sampling all major populations of the Milky Way. After a three year observing campaign on the Sloan 2.5-m Telescope, APOGEE has collected a half million high resolution (R~22,500), high S/N (>100), infrared (1.51-1.70 microns) spectra for 146,000 stars, with time series information via repeat visits to most of these stars. This paper describes the motivations for the survey and its overall design---hardware, field placement, target selection, operations---and gives an overview of these aspects as well as the data reduction, analysis and products. An index is also given to the complement of technical papers that describe various critical survey components in detail. Finally, we discuss the achieved survey performance and illustrate the variety of potential uses of the data products by way of a number of science demonstrations, which span from time series analysis of stellar spectral variations and radial velocity variations from stellar companions, to spatial maps of kinematics, metallicity and abundance patterns across the Galaxy and as a function of age, to new views of the interstellar medium, the chemistry of star clusters, and the discovery of rare stellar species. As part of SDSS-III Data Release 12, all of the APOGEE data products are now publicly available.

We present the first detections by the NASA K2 Mission of oscillations in solar-type stars, using short-cadence data collected during K2 Campaign\,1 (C1). We understand the asteroseismic detection thresholds for C1-like levels of photometric performance, and we can detect oscillations in subgiants having dominant oscillation frequencies around $1000\,\rm \mu Hz$. Changes to the operation of the fine-guidance sensors are expected to give significant improvements in the high-frequency performance from C3 onwards. A reduction in the excess high-frequency noise by a factor of two-and-a-half in amplitude would bring main-sequence stars with dominant oscillation frequencies as high as ${\simeq 2500}\,\rm \mu Hz$ into play as potential asteroseismic targets for K2.

We present a study of 33 {\it Kepler} planet-candidate host stars for which asteroseismic observations have sufficiently high signal-to-noise ratio to allow extraction of individual pulsation frequencies. We implement a new Bayesian scheme that is flexible in its input to process individual oscillation frequencies, combinations of them, and average asteroseismic parameters, and derive robust fundamental properties for these targets. Applying this scheme to grids of evolutionary models yields stellar properties with median statistical uncertainties of 1.2\% (radius), 1.7\% (density), 3.3\% (mass), 4.4\% (distance), and 14\% (age), making this the exoplanet host-star sample with the most precise and uniformly determined fundamental parameters to date. We assess the systematics from changes in the solar abundances and mixing-length parameter, showing that they are smaller than the statistical errors. We also determine the stellar properties with three other fitting algorithms and explore the systematics arising from using different evolution and pulsation codes, resulting in 1\% in density and radius, and 2\% and 7\% in mass and age, respectively. We confirm previous findings of the initial helium abundance being a source of systematics comparable to our statistical uncertainties, and discuss future prospects for constraining this parameter by combining asteroseismology and data from space missions. Finally we compare our derived properties with those obtained using the global average asteroseismic observables along with effective temperature and metallicity, finding an excellent level of agreement. Owing to selection effects, our results show that the majority of the high signal-to-noise ratio asteroseismic {\it Kepler} host stars are older than the Sun.

We derive age constraints for 1639 red giants in the APOKASC sample for which seismic parameters from Kepler, as well as effective temperatures, metallicities and [alpha/Fe] values from APOGEE DR12 are available. We investigate the relation between age and chemical abundances for these stars, using a simple and robust approach to obtain ages. We first derive stellar masses using standard seismic scaling relations, then determine the maximum possible age for each star as function of its mass and metallicity, independently of its evolutionary stage. While the overall trend between maximum age and chemical abundances is a declining fraction of young stars with increasing [alpha/Fe], at least 14 out of 241 stars with [alpha/Fe]>0.13 are younger than 6 Gyr. Five stars with [alpha/Fe]>0.2 have ages below 4 Gyr. We examine the effect of modifications in the standard seismic scaling relations, as well as the effect of very low helium fractions, but these changes are not enough to make these stars as old as usually expected for alpha-rich stars (i.e., ages greater than 8-9 Gyr). Such unusual alpha-rich young stars have also been detected by other surveys, but defy simple explanations in a galaxy evolution context.

The space-borne missions CoRoT and Kepler have provided a large amount of precise photometric data. Among the stars observed, red giants show a rich oscillation pattern that allows their precise characterization. Long-duration observations allow for investigating the fine structure of this oscillation pattern. A common pattern of oscillation frequency was observed in red giant stars, which corresponds to the second-order development of the asymptotic theory. This pattern, called the universal red giant oscillation pattern, describes the frequencies of stellar acoustic modes. We aim to investigate the deviations observed from this universal pattern, thereby characterizing them in terms of the location of the second ionization zone of helium. We also show how this seismic signature depends on stellar evolution. We measured the frequencies of radial modes with a maximum likelihood estimator method, then we identified a modulation corresponding to the departure from the universal oscillation pattern. We identify the modulation component of the radial mode frequency spacings in more than five hundred red giants. The variation in the modulation that we observe at different evolutionary states brings new constraints on the interior models for these stars. We also derive an updated form of the universal pattern that accounts for the modulation and provides highly precise radial frequencies.

Context. The availability of asteroseismic constraints for a large sample of red giant stars from the CoRoT and Kepler missions paves the way for various statistical studies of the seismic properties of stellar populations. Aims. We use the first detailed spectroscopic study of 19 CoRoT red-giant stars (Morel et al 2014) to compare theoretical stellar evolution models to observations of the open cluster NGC 6633 and field stars. Methods. In order to explore the effects of rotation-induced mixing and thermohaline instability, we compare surface abundances of carbon isotopic ratio and lithium with stellar evolution predictions. These chemicals are sensitive to extra-mixing on the red-giant branch. Results. We estimate mass, radius, and distance for each star using the seismic constraints. We note that the Hipparcos and seismic distances are different. However, the uncertainties are such that this may not be significant. Although the seismic distances for the cluster members are self consistent they are somewhat larger than the Hipparcos distance. This is an issue that should be considered elsewhere. Models including thermohaline instability and rotation-induced mixing, together with the seismically determined masses can explain the chemical properties of red-giants targets. However, with this sample of stars we cannot perform stringent tests of the current stellar models. Tighter constraints on the physics of the models would require the measurement of the core and surface rotation rates, and of the period spacing of gravity-dominated mixed modes. A larger number of stars with longer times series, as provided by Kepler or expected with Plato, would help for ensemble asteroseismology.

We report the discovery of Kepler-432b, a giant planet ($M_b = 5.41^{+0.32}_{-0.18} M_{\rm Jup}, R_b = 1.145^{+0.036}_{-0.039} R_{\rm Jup}$) transiting an evolved star $(M_\star = 1.32^{+0.10}_{-0.07} M_\odot, R_\star = 4.06^{+0.12}_{-0.08} R_\odot)$ with an orbital period of $P_b = 52.501129^{+0.000067}_{-0.000053}$ days. Radial velocities (RVs) reveal that Kepler-432b orbits its parent star with an eccentricity of $e = 0.5134^{+0.0098}_{-0.0089}$, which we also measure independently with asterodensity profiling (AP; $e=0.507^{+0.039}_{-0.114}$), thereby confirming the validity of AP on this particular evolved star. The well-determined planetary properties and unusually large mass also make this planet an important benchmark for theoretical models of super-Jupiter formation. Long-term RV monitoring detected the presence of a non-transiting outer planet (Kepler-432c; $M_c \sin{i_c} = 2.43^{+0.22}_{-0.24} M_{\rm Jup}, P_c = 406.2^{+3.9}_{-2.5}$ days), and adaptive optics imaging revealed a nearby (0\farcs87), faint companion (Kepler-432B) that is a physically bound M dwarf. The host star exhibits high signal-to-noise asteroseismic oscillations, which enable precise measurements of the stellar mass, radius and age. Analysis of the rotational splitting of the oscillation modes additionally reveals the stellar spin axis to be nearly edge-on, which suggests that the stellar spin is likely well-aligned with the orbit of the transiting planet. Despite its long period, the obliquity of the 52.5-day orbit may have been shaped by star-planet interaction in a manner similar to hot Jupiter systems, and we present observational and theoretical evidence to support this scenario. Finally, as a short-period outlier among giant planets orbiting giant stars, study of Kepler-432b may help explain the distribution of massive planets orbiting giant stars interior to 1 AU.

We report the discovery of a group of apparently young CoRoT red-giant stars exhibiting enhanced [alpha/Fe] abundance ratios (as determined from APOGEE spectra) with respect to Solar values. Their existence is not explained by standard chemical evolution models of the Milky Way, and shows that the chemical-enrichment history of the Galactic disc is more complex. We find similar stars in previously published samples for which isochrone-ages could be robustly obtained, although in smaller relative numbers, which could explain why these stars have not received prior attention. The young [alpha/Fe]-rich stars are much more numerous in the CoRoT-APOGEE (CoRoGEE) inner-field sample than in any other high-resolution sample available at present, as only CoRoGEE can explore the inner-disc regions and provide ages for its field stars. The kinematic properties of the young [$\alpha$/Fe]-rich stars are not clearly thick-disc like, despite their rather large distances from the Galactic mid-plane. Our tentative interpretation of these and previous intriguing observations in the Milky Way is that these stars were formed close to the end of the Galactic bar, near corotation -- a region where gas can be kept inert for longer times, compared to other regions shocked more frequently by the passage of spiral arms. Moreover, that is where the mass return from older inner-disc stellar generations should be maximal (according to an inside-out disc-formation scenario), further diluting the in-situ gas. Other possibilities to explain these observations (e.g., a recent gas-accretion event) are also discussed.

The first discoveries of exoplanets around Sun-like stars have fueled efforts to find ever smaller worlds evocative of Earth and other terrestrial planets in the Solar System. While gas-giant planets appear to form preferentially around metal-rich stars, small planets (with radii less than four Earth radii) can form under a wide range of metallicities. This implies that small, including Earth-size, planets may have readily formed at earlier epochs in the Universe's history when metals were far less abundant. We report Kepler spacecraft observations of KOI-3158, a metal-poor Sun-like star from the old population of the Galactic thick disk, which hosts five planets with sizes between Mercury and Venus. We used asteroseismology to directly measure a precise age of 11.2+/-1.0 Gyr for the host star, indicating that KOI-3158 formed when the Universe was less than 20% of its current age and making it the oldest known system of terrestrial-size planets. We thus show that Earth-size planets have formed throughout most of the Universe's 13.8-billion-year history, providing scope for the existence of ancient life in the Galaxy.

The chemical composition of stars hosting small exoplanets (with radii less than four Earth radii) appears to be more diverse than that of gas-giant hosts, which tend to be metal-rich. This implies that small, including Earth-size, planets may have readily formed at earlier epochs in the Universe's history when metals were more scarce. We report Kepler spacecraft observations of Kepler-444, a metal-poor Sun-like star from the old population of the Galactic thick disk and the host to a compact system of five transiting planets with sizes between those of Mercury and Venus. We validate this system as a true five-planet system orbiting the target star and provide a detailed characterization of its planetary and orbital parameters based on an analysis of the transit photometry. Kepler-444 is the densest star with detected solar-like oscillations. We use asteroseismology to directly measure a precise age of 11.2+/-1.0 Gyr for the host star, indicating that Kepler-444 formed when the Universe was less than 20% of its current age and making it the oldest known system of terrestrial-size planets. We thus show that Earth-size planets have formed throughout most of the Universe's 13.8-billion-year history, leaving open the possibility for the existence of ancient life in the Galaxy. The age of Kepler-444 not only suggests that thick-disk stars were among the hosts to the first Galactic planets, but may also help to pinpoint the beginning of the era of planet formation.

The Kepler satellite has provided photometric timeseries data of unprecedented length, duty cycle and precision. To fully analyse these data for the tens of thousands of stars observed by Kepler, automated methods are a prerequisite. Here we present an automated procedure to determine the period spacing of gravity modes in red-giant stars ascending the red-giant branch. The gravity modes reside in a cavity in the deep interior of the stars and provide information on the conditions in the stellar core. However, for red giants the gravity modes are not directly observable on the surface, hence this method is based on the pressure-gravity mixed modes that present observable features in the Fourier power spectrum. The method presented here is based on the vertical alignment and symmetry of these mixed modes in a period echelle diagram. We find that we can obtain reliable results for both model frequencies and observed frequencies. Additionally, we carried out Monte Carlo tests to obtain realistic uncertainties on the period spacings with different set of oscillation modes (for the models) and uncertainties on the frequencies. Furthermore, this method has been used to improve mode detection and identification of the observed frequencies in an iterative manner.

We present the first APOKASC catalog of spectroscopic and asteroseismic properties of 1916 red giants observed in the Kepler fields. The spectroscopic parameters provided from the Apache Point Observatory Galactic Evolution Experiment project are complemented with asteroseismic surface gravities, masses, radii, and mean densities determined by members of the Kepler Asteroseismology Science Consortium. We assess both random and systematic sources of error and include a discussion of sample selection for giants in the Kepler fields. Total uncertainties in the main catalog properties are of order 80 K in Teff , 0.06 dex in [M/H], 0.014 dex in log g, and 12% and 5% in mass and radius, respectively; these reflect a combination of systematic and random errors. Asteroseismic surface gravities are substantially more precise and accurate than spectroscopic ones, and we find good agreement between their mean values and the calibrated spectroscopic surface gravities. There are, however, systematic underlying trends with Teff and log g. Our effective temperature scale is between 0-200 K cooler than that expected from the Infrared Flux Method, depending on the adopted extinction map, which provides evidence for a lower value on average than that inferred for the Kepler Input Catalog (KIC). We find a reasonable correspondence between the photometric KIC and spectroscopic APOKASC metallicity scales, with increased dispersion in KIC metallicities as the absolute metal abundance decreases, and offsets in Teff and log g consistent with those derived in the literature. We present mean fitting relations between APOKASC and KIC observables and discuss future prospects, strengths, and limitations of the catalog data.

We present a first determination of distances and extinctions for individual stars in the first release of the APOKASC catalogue, built from the joint efforts of the Apache Point Observatory Galactic Evolution Experiment (APOGEE) and the Kepler Asteroseismic Science Consortium (KASC). Our method takes into account the spectroscopic constraints derived from the APOGEE Stellar Parameters and Chemical Abundances Pipeline, together with the asteroseismic parameters from KASC. These parameters are then employed to estimate intrinsic stellar properties, including absolute magnitudes, using the Bayesian tool PARAM. We then find the distance and extinction that best fit the observed photometry in SDSS, 2MASS, and WISE passbands. The first 1989 giants targeted by APOKASC are found at typical distances between 0.5 and 5 kpc, with individual uncertainties of just ~1.8 per cent. Our extinction estimates are systematically smaller than provided in the Kepler Input Catalogue and by the Schlegel, Finkbeiner and Davis maps. Distances to individual stars in the NGC 6791 and NGC 6819 star clusters agree to within their credible intervals. Comparison with the APOGEE red clump and SAGA catalogues provide another useful check, exhibiting agreement with our measurements to within a few percent. Overall, present methods seem to provide excellent distance and extinction determinations for the bulk of the APOKASC sample. Approximately one third of the stars present broad or multiple-peaked probability density functions and hence increased uncertainties. Uncertainties are expected to be reduced in future releases of the catalogue, when a larger fraction of the stars will have seismically-determined evolutionary status classifications.

Asteroseismic investigations based on the wealth of data now available,in particular from the CoRoT and Kepler missions, require a good understanding of the relation between the observed quantities and the properties of the underlying stellar structure. Kallinger et al. 2012 found a relation between their determination of the asymptotic phase of radial oscillations in evolved stars and the evolutionary state, separating ascending-branch red giants from helium-burning stars in the `red clump'. Here we provide a detailed analysis of this relation, which is found to derive from differences between these two classes of stars in the thermodynamic state of the convective envelope. There is potential for distinguishing red giants and clump stars based on the phase determined from observations that are too short to allow distinction based on determination of the period spacing for mixed modes. The analysis of the phase may also point to a better understanding of the potential for using the helium-ionization-induced acoustic glitch to determine the helium abundance in the envelopes of these stars.

The Sloan Digital Sky Survey III's Apache Point Observatory Galactic Evolution Experiment (APOGEE) is a high-resolution near-infrared spectroscopic survey covering all of the major components of the Galaxy, including the dust-obscured regions of the inner Milky Way disk and bulge. Here we present a sample of 10,341 likely red-clump stars (RC) from the first two years of APOGEE operations, selected based on their position in color-metallicity-surface-gravity-effective-temperature space using a new method calibrated using stellar-evolution models and high-quality asteroseismology data. The narrowness of the RC locus in color-metallicity-luminosity space allows us to assign distances to the stars with an accuracy of 5 to 10%. The sample extends to typical distances of about 3 kpc from the Sun, with some stars out to 8 kpc, and spans a volume of approximately 100 kpc^3 over 5 kpc <~ R <~ 14 kpc, |Z| <~ 2 kpc, and -15 deg <~ Galactocentric azimuth <~ 30 deg. The APOGEE red-clump (APOGEE-RC) catalog contains photometry from 2MASS, reddening estimates, distances, line-of-sight velocities, stellar parameters and elemental abundances determined from the high-resolution APOGEE spectra, and matches to major proper motion catalogs. We determine the survey selection function for this data set and discuss how the RC selection samples the underlying stellar populations. We use this sample to limit any azimuthal variations in the median metallicity within the ~45 degree-wide azimuthal region covered by the current sample to be <= 0.02 dex, which is more than an order of magnitude smaller than the radial metallicity gradient. This result constrains coherent non-axisymmetric flows within a few kpc from the Sun.

The long and almost continuous observations by Kepler show clear evidence of a granulation background signal in a large sample of stars, which is interpreted as the surface manifestation of convection. It has been shown that its characteristic timescale and rms intensity fluctuation scale with the peak frequency (\nu_{max}) of the solar-like oscillations. Various attempts have been made to quantify the observed signal, to determine scaling relations, and to compare them to theoretical predictions. We use a probabilistic method to compare different approaches to extracting the granulation signal. We fit the power density spectra of a large set of Kepler targets, determine the granulation and global oscillation parameter, and quantify scaling relations between them. We establish that a depression in power at about \nu_{max}/2, known from the Sun and a few other main-sequence stars, is also statistically significant in red giants and that a super-Lorentzian function with two components is best suited to reproducing the granulation signal in the broader vicinity of the pulsation power excess. We also establish that the specific choice of the background model can affect the determination of \nu_{max}, introducing systematic uncertainties that can significantly exceed the random uncertainties. We find the characteristic background frequency and amplitude to tightly scale with \nu_{max} for a wide variety of stars, and quantify a mass dependency of the latter. To enable comparison with theoretical predictions, we computed effective timescales and intensity fluctuations and found them to approximately scale as \tau_{eff} \propto g^{-0.85}\,T^{-0.4} and A_{gran} \propto (g^2M)^{-1/4}, respectively. Similarly, the bolometric pulsation amplitude scales approximately as A_{puls} \propto (g^2M)^{-1/3}, which implicitly verifies a separate mass and luminosity dependence of A_{puls}.

We present the characterization of the Kepler-93 exoplanetary system, based on three years of photometry gathered by the Kepler spacecraft. The duration and cadence of the Kepler observations, in tandem with the brightness of the star, enable unusually precise constraints on both the planet and its host. We conduct an asteroseismic analysis of the Kepler photometry and conclude that the star has an average density of 1.652+/-0.006 g/cm^3. Its mass of 0.911+/-0.033 M_Sun renders it one of the lowest-mass subjects of asteroseismic study. An analysis of the transit signature produced by the planet Kepler-93b, which appears with a period of 4.72673978+/-9.7x10^-7 days, returns a consistent but less precise measurement of the stellar density, 1.72+0.02-0.28 g/cm^3. The agreement of these two values lends credence to the planetary interpretation of the transit signal. The achromatic transit depth, as compared between Kepler and the Spitzer Space Telescope, supports the same conclusion. We observed seven transits of Kepler-93b with Spitzer, three of which we conducted in a new observing mode. The pointing strategy we employed to gather this subset of observations halved our uncertainty on the transit radius ratio R_p/R_star. We find, after folding together the stellar radius measurement of 0.919+/-0.011 R_Sun with the transit depth, a best-fit value for the planetary radius of 1.481+/-0.019 R_Earth. The uncertainty of 120 km on our measurement of the planet's size currently renders it one of the most precisely measured planetary radii outside of the Solar System. Together with the radius, the planetary mass of 3.8+/-1.5 M_Earth corresponds to a rocky density of 6.3+/-2.6 g/cm^3. After applying a prior on the plausible maximum densities of similarly-sized worlds between 1--1.5 R_Earth, we find that Kepler-93b possesses an average density within this group.

Stellar distance is an important basic parameter in stellar astrophysics. Stars in a cluster are thought to be formed coevally from the same interstellar cloud of gas and dust. They are therefore expected to have common properties. These common properties strengthen our ability to constrain theoretical models and/or to determine fundamental parameters, such as stellar mass, metal fraction, and distance when tested against an ensemble of cluster stars. Here we derive a new relation based on solar-like oscillations, photometric observations, and the theory of stellar structure and evolution of red giant branch stars to determine cluster distance moduli through the global oscillation parameters $\Delta\nu$ and $\nu_{\rm max}$, and photometric data \textit{V}. The values of $\Delta\nu$ and $\nu_{\rm max}$ are derived from \textit{kepler} observations. At the same time, it is used to interpret the trends between \textit{V} and $\Delta\nu$. From the analyses of this newly derived relation and observational data of NGC 6791 and NGC 6819 we devise a method in which all stars in a cluster are regarded as one entity to determine the cluster distance modulus. This approach fully reflects the characteristic of member stars in a cluster as a natural sample. From this method we derive true distance moduli of $13.09\pm0.10$ mag for NGC 6791 and $11.88\pm0.14$ mag for NGC 6819. Additionally, we find that the distance modulus only slightly depends on the metallicity [Fe/H] in the new relation. A change of 0.1 dex in [Fe/H] will lead to a change of 0.06 mag in the distance modulus.

A precise characterisation of the red giants in the seismology fields of the CoRoT satellite is a prerequisite for further in-depth seismic modelling. High-resolution FEROS and HARPS spectra were obtained as part of the ground-based follow-up campaigns for 19 targets holding great asteroseismic potential. These data are used to accurately estimate their fundamental parameters and the abundances of 16 chemical species in a self-consistent manner. Some powerful probes of mixing are investigated (the Li and CNO abundances, as well as the carbon isotopic ratio in a few cases). The information provided by the spectroscopic and seismic data is combined to provide more accurate physical parameters and abundances. The stars in our sample follow the general abundance trends as a function of the metallicity observed in stars of the Galactic disk. After an allowance is made for the chemical evolution of the interstellar medium, the observational signature of internal mixing phenomena is revealed through the detection at the stellar surface of the products of the CN cycle. A contamination by NeNa-cycled material in the most massive stars is also discussed. With the asteroseismic constraints, these data will pave the way for a detailed theoretical investigation of the physical processes responsible for the transport of chemical elements in evolved, low- and intermediate-mass stars.

Context: Recently, the CoRoT target HD 175272 (F5V), which shows a weak signal of solar-like oscillations, was modelled by a differential asteroseismic analysis (Ozel et al. 2013) relative to a seismically similar star, HD 181420 (F2V), for which there is a clear signature of solar-like oscillations. The results provided by Ozel et al. (2013) indicate the possibility of HD 175272 having subsolar mass, while being of the order of 1000 K hotter than the Sun. This seems unphysical -- standard stellar evolution theory generally does not predict solar-metallicity stars of subsolar mass to be hotter than about 6000K -- and calls for a reanalysis of this star. Aims: We aim to compare the performance of differential asteroseismic analysis with that of grid-based modelling. Methods: We use two sets of stellar model grids and two grid-fitting methods to model HD 175272 and HD 181420. Results: We find that we are able to model both stars with parameters that are both mutually compatible and comparable with other modelling efforts. Hence, with modest spectroscopic and asteroseismic inputs, we obtain reasonable estimates of stellar parameters. In the case of HD 175272, the uncertainties of the stellar parameters from our grid-based modelling are smaller, and hence more physical, than those reported in the differential analysis. Conclusions: Grid-based modelling provides more precise and more realistic results than obtained with differential seismology.

Fundamental stellar properties, such as mass, radius, and age, can be inferred using asteroseismology. Cool stars with convective envelopes have turbulent motions that can stochastically drive and damp pulsations. The properties of the oscillation frequency power spectrum can be tied to mass and radius through solar-scaled asteroseismic relations. Stellar properties derived using these scaling relations need verification over a range of metallicities. Because the age and mass of halo stars are well-constrained by astrophysical priors, they provide an independent, empirical check on asteroseismic mass estimates in the low-metallicity regime. We identify nine metal-poor red giants (including six stars that are kinematically associated with the halo) from a sample observed by both the Kepler space telescope and the Sloan Digital Sky Survey-III APOGEE spectroscopic survey. We compare masses inferred using asteroseismology to those expected for halo and thick-disk stars. Although our sample is small, standard scaling relations, combined with asteroseismic parameters from the APOKASC Catalog, produce masses that are systematically higher (<{\Delta}M>=0.17+/-0.05 Msun) than astrophysical expectations. The magnitude of the mass discrepancy is reduced by known theoretical corrections to the measured large frequency separation scaling relationship. Using alternative methods for measuring asteroseismic parameters induces systematic shifts at the 0.04 Msun level. We also compare published asteroseismic analyses with scaling relationship masses to examine the impact of using the frequency of maximum power as a constraint. Upcoming APOKASC observations will provide a larger sample of ~100 metal-poor stars, important for detailed asteroseismic characterization of Galactic stellar populations.

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

About 1% of giant stars have been shown to have large surface Li abundances, which is unexpected according to standard stellar evolution models. Several scenarios for lithium production have been proposed, but it is still unclear why these Li-rich giants exist. A missing piece in this puzzle is the knowledge of the exact stage of evolution of these stars. Using low-and-high-resolution spectroscopic observations, we have undertaken a survey of lithium-rich giants in the Kepler field. In this letter, we report the finding of the first confirmed Li-rich core-helium-burning giant, as revealed by asteroseismic analysis. The evolutionary timescales constrained by its mass suggest that Li-production most likely took place through non-canonical mixing at the RGB-tip, possibly during the helium flash.

Context. The object HD 43587Aa is a G0V star observed during the 145-day LRa03 run of the COnvection, ROtation and planetary Transits space mission (CoRoT), for which complementary High Accuracy Radial velocity Planet Searcher (HARPS) spectra with S/N>300 were also obtained. Its visual magnitude is 5.71, and its effective temperature is close to 5950 K. It has a known companion in a highly eccentric orbit and is also coupled with two more distant companions. Aims. We undertake a preliminary investigation of the internal structure of HD 43587Aa. Methods. We carried out a seismic analysis of the star, using maximum likelihood estimators and Markov Chain Monte Carlo methods. Results. We established the first table of the eigenmode frequencies, widths, and heights for HD 43587Aa. The star appears to have a mass and a radius slightly larger than the Sun, and is slightly older (5.6 Gyr). Two scenarios are suggested for the geometry of the star: either its inclination angle is very low, or the rotation velocity of the star is very low. Conclusions. A more detailed study of the rotation and of the magnetic and chromospheric activity for this star is needed, and will be the subject of a further study. New high resolution spectrometric observations should be performed for at least several months in duration.

We present revised properties for 196,468 stars observed by the NASA Kepler Mission and used in the analysis of Quarter 1-16 (Q1-Q16) data to detect and characterize transiting exoplanets. The catalog is based on a compilation of literature values for atmospheric properties (temperature, surface gravity, and metallicity) derived from different observational techniques (photometry, spectroscopy, asteroseismology, and exoplanet transits), which were then homogeneously fitted to a grid of Dartmouth stellar isochrones. We use broadband photometry and asteroseismology to characterize 11,532 Kepler targets which were previously unclassified in the Kepler Input Catalog (KIC). We report the detection of oscillations in 2,762 of these targets, classifying them as giant stars and increasing the number of known oscillating giant stars observed by Kepler by ~20% to a total of ~15,500 stars. Typical uncertainties in derived radii and masses are ~40% and ~20%, respectively, for stars with photometric constraints only, and 5-15% and ~10% for stars based on spectroscopy and/or asteroseismology, although these uncertainties vary strongly with spectral type and luminosity class. A comparison with the Q1-Q12 catalog shows a systematic decrease in radii for M dwarfs, while radii for K dwarfs decrease or increase depending on the Q1-Q12 provenance (KIC or Yonsei-Yale isochrones). Radii of F-G dwarfs are on average unchanged, with the exception of newly identified giants. The Q1-Q16 star properties catalog is a first step towards an improved characterization of all Kepler targets to support planet occurrence studies.

We present a novel method for estimating lower-limit surface gravities log g of Kepler targets whose data do not allow the detection of solar-like oscillations. The method is tested using an ensemble of solar-type stars observed in the context of the Kepler Asteroseismic Science Consortium. We then proceed to estimate lower-limit log g for a cohort of Kepler solar-type planet-candidate host stars with no detected oscillations. Limits on fundamental stellar properties, as provided by this work, are likely to be useful in the characterization of the corresponding candidate planetary systems. Furthermore, an important byproduct of the current work is the confirmation that amplitudes of solar-like oscillations are suppressed in stars with increased levels of surface magnetic activity.

We report on the masses, sizes, and orbits of the planets orbiting 22 Kepler stars. There are 49 planet candidates around these stars, including 42 detected through transits and 7 revealed by precise Doppler measurements of the host stars. Based on an analysis of the Kepler brightness measurements, along with high-resolution imaging and spectroscopy, Doppler spectroscopy, and (for 11 stars) asteroseismology, we establish low false-positive probabilities for all of the transiting planets (41 of 42 have a false-positive probability under 1%), and we constrain their sizes and masses. Most of the transiting planets are smaller than 3X the size of Earth. For 16 planets, the Doppler signal was securely detected, providing a direct measurement of the planet's mass. For the other 26 planets we provide either marginal mass measurements or upper limits to their masses and densities; in many cases we can rule out a rocky composition. We identify 6 planets with densities above 5 g/cc, suggesting a mostly rocky interior for them. Indeed, the only planets that are compatible with a purely rocky composition are smaller than ~2 R_earth. Larger planets evidently contain a larger fraction of low-density material (H, He, and H2O).

The unparalleled photometric data obtained by NASA's Kepler space telescope led to an improved understanding of red giant stars and binary stars. Seismology allows us to constrain the properties of red giants. In addition to eclipsing binaries, eccentric non-eclipsing binaries, exhibiting ellipsoidal modulations, have been detected with Kepler. We aim to study the properties of eccentric binary systems containing a red giant star and derive the parameters of the primary giant component. We apply asteroseismic techniques to determine masses and radii of the primary component of each system. For a selected target, light and radial velocity curve modelling techniques are applied to extract the parameters of the system. The effects of stellar on the binary system are studied. The paper presents the asteroseismic analysis of 18 pulsating red giants in eccentric binary systems, for which masses and radii were constrained. The orbital periods of these systems range from 20 to 440days. From radial velocity measurements we find eccentricities between e=0.2 to 0.76. As a case study we present a detailed analysis of KIC5006817. From seismology we constrain the rotational period of the envelope to be at least 165 d, roughly twice the orbital period. The stellar core rotates 13 times faster than the surface. From the spectrum and radial velocities we expect that the Doppler beaming signal should have a maximum amplitude of 300ppm in the light curve. Through binary modelling, we determine the mass of the secondary component to be 0.29$\pm$0.03\,$M_\odot$. For KIC5006817 we exclude pseudo-synchronous rotation of the red giant with the orbit. The comparison of the results from seismology and modelling of the light curve shows a possible alignment of the rotational and orbital axis at the 2$\sigma$ level. Red giant eccentric systems could be progenitors of cataclysmic variables and hot subdwarf B stars.

Stellar mass $M$, radius $R$, and gravity $g$ are important basic parameters in stellar physics. Accurate values for these parameters can be obtained from the gravitational interaction between stars in multiple systems or from asteroseismology. Stars in a cluster are thought to be formed coevally from the same interstellar cloud of gas and dust. The cluster members are therefore expected to have some properties in common. These common properties strengthen our ability to constrain stellar models and asteroseismically derived $M$, $R$ and $g$ when tested against an ensemble of cluster stars. Here we derive new scaling relations based on a relation for stars on the Hayashi track ($\sqrt{T_{\rm eff}} \sim g^pR^q$) to determine the masses and metallicities of red giant branch stars in open clusters NGC 6791 and NGC 6819 from the global oscillation parameters $\Delta\nu$ (the large frequency separation) and $\nu_{\rm max}$ (frequency of maximum oscillation power). The $\Delta\nu$ and $\nu_{\rm max}$ values are derived from \kepler\ observations. From the analysis of these new relations we derive: (1) direct observational evidence that the masses of red giant branch stars in a cluster are the same within their uncertainties, (2) new methods to derive $M$ and $z$ of the cluster in a self consistent way from $\Delta\nu$ and $\nu_{\rm max}$, with lower intrinsic uncertainties, (3) the mass dependence in the $\Delta\nu$ - $\nu_{\rm max}$ relation for red giant branch stars.

Thanks to significant improvements in high-resolution spectrographs and the launch of dedicated space missions MOST, CoRoT and Kepler, the number of subgiants and red-giant stars with detected oscillations has increased significantly over the last decade. The amount of detail that can now be resolved in the oscillation patterns does allow for in-depth investigations of the internal structures of these stars. One phenomenon that plays an important role in such studies are mixed modes. These are modes that carry information of the inner radiative region as well as from the convective outer part of the star allowing to probe different depths of the stars. Here, we describe mixed modes and highlight some recent results obtained using mixed modes observed in subgiants and red-giant stars.

Stars hosting hot Jupiters are often observed to have high obliquities, whereas stars with multiple co-planar planets have been seen to have low obliquities. This has been interpreted as evidence that hot-Jupiter formation is linked to dynamical disruption, as opposed to planet migration through a protoplanetary disk. We used asteroseismology to measure a large obliquity for Kepler-56, a red giant star hosting two transiting co-planar planets. These observations show that spin-orbit misalignments are not confined to hot-Jupiter systems. Misalignments in a broader class of systems had been predicted as a consequence of torques from wide-orbiting companions, and indeed radial-velocity measurements revealed a third companion in a wide orbit in the Kepler-56 system.

We use asteroseismic data obtained by the NASA Kepler Mission to estimate the fundamental properties of more than 500 main-sequence and sub-giant stars. Data obtained during the first 10 months of Kepler science operations were used for this work, when these solar-type targets were observed for one month each in a survey mode. Stellar properties have been estimated using two global asteroseismic parameters and complementary photometric and spectroscopic data. Homogeneous sets of effective temperatures were available for the entire ensemble from complementary photometry; spectroscopic estimates of T_eff and [Fe/H] were available from a homogeneous analysis of ground-based data on a subset of 87 stars. [Abbreviated version... see paper for full abstract.]

Solar-like oscillations in red giants have been investigated with CoRoT and Kepler, while pulsations in more evolved M giants have been studied with ground-based microlensing surveys. After 3.1 years of observation with Kepler, it is now possible to make a link between these different observations of semi-regular variables. We aim to identify period-luminosity sequences in evolved red giants identified as semi-regular variables. Then, we investigate the consequences of the comparison of ground-based and space-borne observations. We have first measured global oscillation parameters of evolved red giants observed with Kepler with the envelope autocorrelation function method. We then used an extended form of the universal red giant oscillation pattern, extrapolated to very low frequency, to fully identify their oscillations. From the link between red giant oscillations observed by Kepler and period-luminosity sequences, we have identified these relations in evolved red giants as radial and non-radial solar-like oscillations. We were able to expand scaling relations at very low frequency. This helped us to identify the different sequences of period-luminosity relations, and allowed us to propose a calibration of the K magnitude with the observed frequency large separation. Interpreting period-luminosity relations in red giants in terms of solar-like oscillations allows us to investigate, with a firm physical basis, the time series obtained from ground-based microlensing surveys. This can be done with an analytical expression that describes the low-frequency oscillation spectra. The different behavior of oscillations at low frequency, with frequency separations scaling only approximately with the square root of the mean stellar density, can be used to address precisely the physics of the semi-regular variables.

We comment on the potential for continuing asteroseismology of solar-type and red-giant stars in a 2-wheel Kepler Mission. Our main conclusion is that by targeting stars in the ecliptic it should be possible to perform high-quality asteroseismology, as long as favorable scenarios for 2-wheel pointing performance are met. Targeting the ecliptic would potentially facilitate unique science that was not possible in the nominal Mission, notably from the study of clusters that are significantly brighter than those in the Kepler field. Our conclusions are based on predictions of 2-wheel observations made by a space photometry simulator, with information provided by the Kepler Project used as input to describe the degraded pointing scenarios. We find that elevated levels of frequency-dependent noise, consistent with the above scenarios, would have a significant negative impact on our ability to continue asteroseismic studies of solar-like oscillators in the Kepler field. However, the situation may be much more optimistic for observations in the ecliptic, provided that pointing resets of the spacecraft during regular desaturations of the two functioning reaction wheels are accurate at the < 1 arcsec level. This would make it possible to apply a post-hoc analysis that would recover most of the lost photometric precision. Without this post-hoc correction---and the accurate re-pointing it requires---the performance would probably be as poor as in the Kepler-field case. Critical to our conclusions for both fields is the assumed level of pointing noise (in the short-term jitter and the longer-term drift). We suggest that further tests will be needed to clarify our results once more detail and data on the expected pointing performance becomes available, and we offer our assistance in this work.

The SDSS-III Apache Point Observatory Galactic Evolution Experiment (APOGEE) is a three year survey that is collecting 100,000 high-resolution spectra in the near-IR across multiple Galactic populations. To derive stellar parameters and chemical compositions from this massive data set, the APOGEE Stellar Parameters and Chemical Abundances Pipeline (ASPCAP) has been developed. Here, we describe empirical calibrations of stellar parameters presented in the first SDSS-III APOGEE data release (DR10). These calibrations were enabled by observations of 559 stars in 20 globular and open clusters. The cluster observations were supplemented by observations of stars in NASA's Kepler field that have well determined surface gravities from asteroseismic analysis. We discuss the accuracy and precision of the derived stellar parameters, considering especially effective temperature, surface gravity, and metallicity; we also briefly discuss the derived results for the abundances of the alpha-elements, carbon, and nitrogen. Overall, we find that ASPCAP achieves reasonably accurate results for temperature and metallicity, but suffers from systematic errors in surface gravity. We derive calibration relations that bring the raw ASPCAP results into better agreement with independently determined stellar parameters. The internal scatter of ASPCAP parameters within clusters suggests that, metallicities are measured with a precision better than 0.1 dex, effective temperatures better than 150 K, and surface gravities better than 0.2 dex. The understanding provided by the clusters and Kepler giants on the current accuracy and precision will be invaluable for future improvements of the pipeline.

The space-borne observatories CoRoT (Convection Rotation and planetary Transits) and Kepler have provided photometric time series data of unprecedented precision for large numbers of stars. These data have revolutionized the fields of transiting exoplanets and asteroseismology. In this review some important asteroseismic results obtained using data from the CoRoT and Kepler space missions concerning stars that show solar-like oscillations are discussed. These results comprise, among others, measurements of the location of the base of the convection zone and helium second-ionization zone in main-sequence stars, the presence (or not) of core-helium burning in red-giant stars, as well as differential rotation in these stars.

The satellite CoRoT (Convection, Rotation, and planetary Transits) has provided high-quality data for almost six years. We show here the asteroseismic analysis and modeling of HD169392A, which belongs to a binary system weakly gravitationally bound as the distance between the two components is of 4250 AU. The main component, HD169392A, is a G0IV star with a magnitude of 7.50 while the second component is a G0V-G2IV star with a magnitude of 8.98. This analysis focuses on the main component, as the secondary one is too faint to measure any seismic parameters. A complete modeling has been possible thanks to the complementary spectroscopic observations from HARPS, providing Teff=5985+/-60K, log g=3.96+/-0.07, and [Fe/H]=- 0.04+/-0.10.

Detached eclipsing binaries (dEBs) are ideal targets for accurate measurement of masses and radii of ther component stars. If at least one of the stars has evolved off the main sequence (MS), the masses and radii give a strict constraint on the age of the stars. Several dEBs containing a bright K giant and a fainter MS star have been discovered by the Kepler satellite. The mass and radius of a red giant (RG) star can also be derived from its asteroseismic signal. The parameters determined in this way depend on stellar models and may contain systematic errors. It is important to validate the asteroseismically determined mass and radius with independent methods. This can be done when stars are members of stellar clusters or members of dEBs. KIC 8410637 consists of an RG and an MS star. The aim is to derive accurate masses and radii for both components and provide the foundation for a strong test of the asteroseismic method and the accuracy of the deduced mass, radius and age. We analyse high-resolution spectra from three different spectrographs. We also calculate a fit to the Kepler light curve and use ground-based photometry to determine the flux ratios between the component stars in the BVRI passbands. We measured the masses and radii of the stars in the dEB, and the classical parameters Teff, log g and [Fe/H] from the spectra and ground-based photometry. The RG component of KIC 8410637 is most likely in the core helium-burning red clump phase of evolution and has an age and composition very similar to the stars in the open cluster NGC 6819. The mass of the RG in KIC 8410637 should therefore be similar to the mass of RGs in NGC 6819, thus lending support to the most up-to-date version of the asteroseismic scaling relations. This is the first direct measurement of both mass and radius for an RG to be compared with values for RGs from asteroseismic scaling relations.

Asteroseismology, i.e. the study of the internal structures of stars via their global oscillations, is a valuable tool to obtain stellar parameters such as mass, radius, surface gravity and mean density. These parameters can be obtained using certain scaling relations which are based on an asymptotic approximation. Usually the observed oscillation parameters are assumed to follow these scaling relations. Recently, it has been questioned whether this is a valid approach, i.e., whether the order of the observed oscillation modes are high enough to be approximated with an asymptotic theory. In this work we use stellar models to investigate whether the differences between observable oscillation parameters and their asymptotic estimates are indeed significant. We compute the asymptotic values directly from the stellar models and derive the observable values from adiabatic pulsation calculations of the same models. We find that the extent to which the atmosphere is included in the models is a key parameter. Considering a larger extension of the atmosphere beyond the photosphere reduces the difference between the asymptotic and observable values of the large frequency separation. Therefore, we conclude that the currently suggested discrepancies in the scaling relations might have been overestimated. Hence, based on the results presented here we believe that the suggestions of Mosser et al. (2013) should not be followed without careful consideration.

Context: Asteroseismic surface gravity values can be of importance in determining spectroscopic stellar parameters. The independent log(g) value from asteroseismology can be used as a fixed value in the spectroscopic analysis to reduce uncertainties due to the fact that log(g) and effective temperature can not be determined independently from spectra. Since 2012, a combined analysis of seismically and spectroscopically derived stellar properties is ongoing for a large survey with SDSS/APOGEE and Kepler. Therefore, knowledge of any potential biases and uncertainties in asteroseismic log(g) values is now becoming important. Aims: The seismic parameter needed to derive log(g) is the frequency of maximum oscillation power (nu_max). Here, we investigate the influence of nu_max derived with different methods on the derived log(g) values. The large frequency separation between modes of the same degree and consecutive radial orders (Dnu) is often used as an additional constraint for the determination of log(g). Additionally, we checked the influence of small corrections applied to Dnu on the derived values of log(g). Methods We use methods extensively described in the literature to determine nu_max and Dnu together with seismic scaling relations and grid-based modeling to derive log(g). Results: We find that different approaches to derive oscillation parameters give results for log(g) with small, but different, biases for red-clump and red-giant-branch stars. These biases are well within the quoted uncertainties of ~0.01 dex (cgs). Corrections suggested in the literature to the Dnu scaling relation have no significant effect on log(g). However somewhat unexpectedly, method specific solar reference values induce biases of the order of the uncertainties, which is not the case when canonical solar reference values are used.

Since the discovery of the first exoplanet we have known that other planetary systems can look quite unlike our own. However, until recently we have only been able to probe the upper range of the planet size distribution. The high precision of the Kepler space telescope has allowed us to detect planets that are the size of Earth and somewhat smaller, but no previous planets have been found that are smaller than those we see in our own Solar System. Here we report the discovery of a planet significantly smaller than Mercury. This tiny planet is the innermost of three planets that orbit the Sun-like host star, which we have designated Kepler-37. Owing to its extremely small size, similar to that of Earth's Moon, and highly irradiated surface, Kepler-37b is probably a rocky planet with no atmosphere or water, similar to Mercury.

We have used asteroseismology to determine fundamental properties for 66 Kepler planet-candidate host stars, with typical uncertainties of 3% and 7% in radius and mass, respectively. The results include new asteroseismic solutions for four host stars with confirmed planets (Kepler-4, Kepler-14, Kepler-23 and Kepler-25) and increase the total number of Kepler host stars with asteroseismic solutions to 77. A comparison with stellar properties in the planet-candidate catalog by Batalha et al. shows that radii for subgiants and giants obtained from spectroscopic follow-up are systematically too low by up to a factor of 1.5, while the properties for unevolved stars are in good agreement. We furthermore apply asteroseismology to confirm that a large majority of cool main-sequence hosts are indeed dwarfs and not misclassified giants. Using the revised stellar properties, we recalculate the radii for 107 planet candidates in our sample, and comment on candidates for which the radii change from a previously giant-planet/brown-dwarf/stellar regime to a sub-Jupiter size, or vice versa. A comparison of stellar densities from asteroseismology with densities derived from transit models in Batalha et al. assuming circular orbits shows significant disagreement for more than half of the sample due to systematics in the modeled impact parameters, or due to planet candidates which may be in eccentric orbits. Finally, we investigate tentative correlations between host-star masses and planet candidate radii, orbital periods, and multiplicity, but caution that these results may be influenced by the small sample size and detection biases.

Results on the obliquity of exoplanet host stars -- the angle between the stellar spin axis and the planetary orbital axis -- provide important diagnostic information for theories describing planetary formation. Here we present the first application of asteroseismology to the problem of stellar obliquity determination in systems with transiting planets and Sun-like host stars. We consider two systems observed by the NASA Kepler Mission which have multiple transiting small (super-Earth sized) planets: the previously reported Kepler-50 and a new system, Kepler-65, whose planets we validate in this paper. Both stars show rich spectra of solar-like oscillations. From the asteroseismic analysis we find that each host has its rotation axis nearly perpendicular to the line of sight with the sines of the angles constrained at the 1-sigma level to lie above 0.97 and 0.91, respectively. We use statistical arguments to show that coplanar orbits are favoured in both systems, and that the orientations of the planetary orbits and the stellar rotation axis are correlated.

NASA's Kepler Mission has revealed two transiting planets orbiting Kepler-68. Follow-up Doppler measurements have established the mass of the innermost planet and revealed a third jovian-mass planet orbiting beyond the two transiting planets. Kepler-68b, in a 5.4 day orbit has mass 8.3 +/- 2.3 Earth, radius 2.31 +/- 0.07 Earth radii, and a density of 3.32 +/- 0.92 (cgs), giving Kepler-68b a density intermediate between that of the ice giants and Earth. Kepler-68c is Earth-sized with a radius of 0.953 Earth and transits on a 9.6 day orbit; validation of Kepler-68c posed unique challenges. Kepler-68d has an orbital period of 580 +/- 15 days and minimum mass of Msin(i) = 0.947 Jupiter. Power spectra of the Kepler photometry at 1-minute cadence exhibit a rich and strong set of asteroseismic pulsation modes enabling detailed analysis of the stellar interior. Spectroscopy of the star coupled with asteroseismic modeling of the multiple pulsation modes yield precise measurements of stellar properties, notably Teff = 5793 +/- 74 K, M = 1.079 +/- 0.051 Msun, R = 1.243 +/- 0.019 Rsun, and density 0.7903 +/- 0.0054 (cgs), all measured with fractional uncertainties of only a few percent. Models of Kepler-68b suggest it is likely composed of rock and water, or has a H and He envelope to yield its density of about 3 (cgs).

We present an asteroseismic approach to study the dynamics of the stellar interior in red-giant stars by asteroseismic inversion of the splittings induced by the stellar rotation on the oscillation frequencies. We show preliminary results obtained for the red giant KIC4448777 observed by the space mission Kepler.

Rotation plays a key role in stellar structure and its evolution. Through transport processes which induce rotational mixing of chemical species and the redistribution of angular momentum, internal stellar rotation influences the evolutionary tracks in the Hertzsprung-Russell diagram. In turn, evolution influences the rotational properties. Therefore, information on the rotational properties of the deep interior would help to better understand the stellar evolution. However, as the internal rotational profile cannot be measured directly, it remains a major unknown leaving this important aspect of models unconstrained. We can test for nonrigid rotation inside the stars with asteroseismology. Through the effect of rotational splitting of non-radial oscillation modes, we investigate the internal rotation profile indirectly. Red giants have very slow rotation rates leading to a rotational splitting on the level of a few tenth of a \mu Hz. Only from more than 1.5 years of consecutive data from the NASA Kepler space telescope, these tiny variations could be resolved. A qualitative comparison to theoretical models allowed constraining the core-to-surface rotation rate for some of these evolved stars. In this paper, we report on the first results of a large sample study of splitting of individual dipole modes.

In this review we will discuss the current standing and open questions of seismology in active stars. With the longer photometric timeseries data that are --and will become-- available from space-missions such as Kepler we foresee significant progress in our understanding of stellar internal structures and processes --including interactions between them-- taking place in active stars in the next few years.

A precise characterisation of the red giants in the seismology fields of the CoRoT satellite is a prerequisite for further in-depth seismic modelling. The optical spectra obtained for 19 targets have been used to accurately estimate their fundamental parameters and chemical composition. The extent of internal mixing is also investigated through the abundances of Li, CNO and Na (as well as 12C/13C in a few cases).

We present results of a long-baseline interferometry campaign using the PAVO beam combiner at the CHARA Array to measure the angular sizes of five main-sequence stars, one subgiant and four red giant stars for which solar-like oscillations have been detected by either Kepler or CoRoT. By combining interferometric angular diameters, Hipparcos parallaxes, asteroseismic densities, bolometric fluxes and high-resolution spectroscopy we derive a full set of near model-independent fundamental properties for the sample. We first use these properties to test asteroseismic scaling relations for the frequency of maximum power (nu_max) and the large frequency separation (Delta_nu). We find excellent agreement within the observational uncertainties, and empirically show that simple estimates of asteroseismic radii for main-sequence stars are accurate to <~4%. We furthermore find good agreement of our measured effective temperatures with spectroscopic and photometric estimates with mean deviations for stars between T_eff = 4600-6200 K of -22+/-32 K (with a scatter of 97K) and -58+/-31 K (with a scatter of 93 K), respectively. Finally we present a first comparison with evolutionary models, and find differences between observed and theoretical properties for the metal-rich main-sequence star HD173701. We conclude that the constraints presented in this study will have strong potential for testing stellar model physics, in particular when combined with detailed modelling of individual oscillation frequencies.

The numerous results obtained with asteroseismology thanks to space missions such as CoRoT and Kepler are providing a new insight on stellar evolution. After five years of observations, CoRoT is going on providing high-quality data. We present here the analysis of the double star HD169392 complemented by ground-based spectroscopic observations. This work aims at characterizing the fundamental parameters of the two stars, their chemical composition, the acoustic-mode global parameters including their individual frequencies, and their dynamics. We have analysed HARPS observations of the two stars to retrieve their chemical compositions. Several methods have been used and compared to measure the global properties of acoustic modes and their individual frequencies from the photometric data of CoRoT. The new spectroscopic observations and archival astrometric values suggest that HD169392 is a wide binary system weakly bounded. We have obtained the spectroscopic parameters for both components, suggesting the origin from the same cloud. However, only the mode signature of HD169392 A has been measured within the CoRoT data. The signal-to-noise ratio of the modes in HD169392B is too low to allow any confident detection. We were able to extract mode parameters of modes for l=0, 1, 2, and 3. The study of the splittings and inclination angle gives two possible solutions with splittings and inclination angles of 0.4-1.0 muHz and 20-40 degrees for one case and 0.2-0.5 muHz and 55-86 degrees for the other case. The modeling of this star with the Asteroseismic Modeling Portal led to a mass of 1.15+/-0.01 Ms, a radius of 1.88+/-0.02 Rs, and an age of 4.33+/-0.12 Gyr, where the uncertainties are the internal ones.

The space mission Kepler provides us with long and uninterrupted photometric time series of red giants. We are now able to probe the rotational behaviour in their deep interiors using the observations of mixed modes. We aim to measure the rotational splittings in red giants and to derive scaling relations for rotation related to seismic and fundamental stellar parameters. We have developed a dedicated method for automated measurements of the rotational splittings in a large number of red giants. Ensemble asteroseismology, namely the examination of a large number of red giants at different stages of their evolution, allows us to derive global information on stellar evolution. We have measured rotational splittings in a sample of about 300 red giants. We have also shown that these splittings are dominated by the core rotation. Under the assumption that a linear analysis can provide the rotational splitting, we observe a small increase of the core rotation of stars ascending the red giant branch. Alternatively, an important slow down is observed for red-clump stars compared to the red giant branch. We also show that, at fixed stellar radius, the specific angular momentum increases with increasing stellar mass. Ensemble asteroseismology indicates what has been indirectly suspected for a while: our interpretation of the observed rotational splittings leads to the conclusion that the mean core rotation significantly slows down during the red giant phase. The slow-down occurs in the last stages of the red giant branch. This spinning down explains, for instance, the long rotation periods measured in white dwarfs

Accurately determining the properties of stars is of prime importance for characterizing stellar populations in our Galaxy. The field of asteroseismology has been thought to be particularly successful in such an endeavor for stars in different evolutionary stages. However, to fully exploit its potential, robust methods for estimating stellar parameters are required and independent verification of the results is mandatory. With this purpose, we present a new technique to obtain stellar properties by coupling asteroseismic analysis with the InfraRed Flux Method. By using two global seismic observables and multi-band photometry, the technique allows us to obtain masses, radii, effective temperatures, bolometric fluxes, and hence distances for field stars in a self-consistent manner. We apply our method to 22 solar-like oscillators in the Kepler short-cadence sample, that have accurate Hipparcos parallaxes. Our distance determinations agree to better than 5%, while measurements of spectroscopic effective temperatures and interferometric radii also validate our results. We briefly discuss the potential of our technique for stellar population analysis and models of Galactic Chemical Evolution.

We studied solar-like oscillations in 115 red giants in the three open clusters NGC 6791, NGC 6811, and NGC 6819, based on photometric data covering more than 19 months with NASA's Kepler space telescope. We present the asteroseismic diagrams of the asymptotic parameters \delta\nu_02, \delta\nu_01 and \epsilon, which show clear correlation with fundamental stellar parameters such as mass and radius. When the stellar populations from the clusters are compared, we see evidence for a difference in mass of the red giant branch stars, and possibly a difference in structure of the red clump stars, from our measurements of the small separations \delta\nu_02 and \delta\nu_01. Ensemble \'{e}chelle diagrams and upper limits to the linewidths of l = 0 modes as a function of \Delta\nu of the clusters NGC 6791 and NGC 6819 are also shown, together with the correlation between the l = 0 ridge width and the T_eff of the stars. Lastly, we distinguish between red giant branch and red clump stars through the measurement of the period spacing of mixed dipole modes in 53 stars among all the three clusters to verify the stellar classification from the color-magnitude diagram. These seismic results also allow us to identify a number of special cases, including evolved blue stragglers and binaries, as well as stars in late He-core burning phases, which can be potentially interesting targets for detailed theoretical modeling.

Stellar models generally use simple parametrizations to treat convection. The most widely used parametrization is the so-called "Mixing Length Theory" where the convective eddy sizes are described using a single number, \alpha, the mixing-length parameter. This is a free parameter, and the general practice is to calibrate \alpha using the known properties of the Sun and apply that to all stars. Using data from NASA's Kepler mission we show that using the solar-calibrated \alpha is not always appropriate, and that in many cases it would lead to estimates of initial helium abundances that are lower than the primordial helium abundance. Kepler data allow us to calibrate \alpha for many other stars and we show that for the sample of stars we have studied, the mixing-length parameter is generally lower than the solar value. We studied the correlation between \alpha and stellar properties, and we find that \alpha increases with metallicity. We therefore conclude that results obtained by fitting stellar models or by using population-synthesis models constructed with solar values of \alpha are likely to have large systematic errors. Our results also confirm theoretical expectations that the mixing-length parameter should vary with stellar properties.

The length of the asteroseismic timeseries obtained from the Kepler satellite analysed here span 19 months. Kepler provides the longest continuous timeseries currently available, which calls for a study of the influence of the increased timespan on the accuracy and precision of the obtained results. We find that in general a minimum of the order of 400 day long timeseries are necessary to obtain reliable results for the global oscillation parameters in more than 95% of the stars, but this does depend on <dnu>. In a statistical sense the quoted uncertainties seem to provide a reasonable indication of the precision of the obtained results in short (50-day) runs, they do however seem to be overestimated for results of longer runs. Furthermore, the different definitions of the global parameters used in the different methods have non-negligible effects on the obtained values. Additionally, we show that there is a correlation between nu_max and the flux variance. We conclude that longer timeseries improve the likelihood to detect oscillations with automated codes (from ~60% in 50 day runs to > 95% in 400 day runs with a slight method dependence) and the precision of the obtained global oscillation parameters. The trends suggest that the improvement will continue for even longer timeseries than the 600 days considered here, with a reduction in the median absolute deviation of more than a factor of 10 for an increase in timespan from 50 to 2000 days (the currently foreseen length of the mission). This work shows that global parameters determined with high precision - thus from long datasets - using different definitions can be used to identify the evolutionary state of the stars. (abstract truncated)

In the Solar system the planets' compositions vary with orbital distance, with rocky planets in close orbits and lower-density gas giants in wider orbits. The detection of close-in giant planets around other stars was the first clue that this pattern is not universal, and that planets' orbits can change substantially after their formation. Here we report another violation of the orbit-composition pattern: two planets orbiting the same star with orbital distances differing by only 10%, and densities differing by a factor of 8. One planet is likely a rocky `super-Earth', whereas the other is more akin to Neptune. These planets are thirty times more closely spaced--and have a larger density contrast--than any adjacent pair of planets in the Solar system.

Rotation is expected to have an important influence on the structure and the evolution of stars. However, the mechanisms of angular momentum transport in stars remain theoretically uncertain and very complex to take into account in stellar models. To achieve a better understanding of these processes, we desperately need observational constraints on the internal rotation of stars, which until very recently were restricted to the Sun. In this paper, we report the detection of mixed modes - i.e. modes that behave both as g modes in the core and as p modes in the envelope - in the spectrum of the early red giant KIC7341231, which was observed during one year with the Kepler spacecraft. By performing an analysis of the oscillation spectrum of the star, we show that its non-radial modes are clearly split by stellar rotation and we are able to determine precisely the rotational splittings of 18 modes. We then find a stellar model that reproduces very well the observed atmospheric and seismic properties of the star. We use this model to perform inversions of the internal rotation profile of the star, which enables us to show that the core of the star is rotating at least five times faster than the envelope. This will shed new light on the processes of transport of angular momentum in stars. In particular, this result can be used to place constraints on the angular momentum coupling between the core and the envelope of early red giants, which could help us discriminate between the theories that have been proposed over the last decades.

Context: Accurate fundamental parameters of stars are essential for the asteroseismic analysis of data from the NASA Kepler mission. Aims: We aim at determining accurate atmospheric parameters and the abundance pattern for a sample of 82 red giants that are targets for the Kepler mission. Methods: We have used high-resolution, high signal-to-noise spectra from three different spectrographs. We used the iterative spectral synthesis method VWA to derive the fundamental parameters from carefully selected high-quality iron lines. After determination of the fundamental parameters, abundances of 13 elements were measured using equivalent widths of the spectral lines. Results: We identify discrepancies in log g and [Fe/H], compared to the parameters based on photometric indices in the Kepler Input Catalogue (larger than 2.0 dex for log g and [Fe/H] for individual stars). The Teff found from spectroscopy and photometry shows good agreement within the uncertainties. We find good agreement between the spectroscopic log g and the log g derived from asteroseismology. Also, we see indications of a potential metallicity effect on the stellar oscillations. Conclusions: We have determined the fundamental parameters and element abundances of 82 red giants. The large discrepancies between the spectroscopic log g and [Fe/H] and values in the Kepler Input Catalogue emphasize the need for further detailed spectroscopic follow-up of the Kepler targets in order to produce reliable results from the asteroseismic analysis.

Solar-like oscillations have been observed by Kepler and CoRoT in several solar-type stars, thereby providing a way to probe the stars using asteroseismology. We provide the mode frequencies of the oscillations of various stars required to perform a comparison with those obtained from stellar modelling. We used a time series of nine months of data for each star. The 61 stars observed were categorised in three groups: simple, F-like and mixed-mode. The simple group includes stars for which the identification of the mode degree is obvious. The F-like group includes stars for which the identification of the degree is ambiguous. The mixed-mode group includes evolved stars for which the modes do not follow the asymptotic relation of low-degree frequencies. Following this categorisation, the power spectra of the 61 main sequence and subgiant stars were analysed using both maximum likelihood estimators and Bayesian estimators, providing individual mode characteristics such as frequencies, linewidths, and mode heights. We developed and describe a methodology for extracting a single set of mode frequencies from multiple sets derived by different methods and individual scientists. We report on how one can assess the quality of the fitted parameters using the likelihood ratio test and the posterior probabilities. We provide the mode frequencies of 61 stars (with their 1-sigma error bars), as well as their associated echelle diagrams.

Asteroseismology of F-type stars has been hindered by an ambiguity in identification of their oscillation modes. The regular mode pattern that makes this task trivial in cooler stars is masked by increased linewidths. The absolute mode frequencies, encapsulated in the asteroseismic variable epsilon, can help solve this impasse because the values of epsilon implied by the two possible mode identifications are distinct. We find that the correct epsilon can be deduced from the effective temperature and the linewidths and we apply these methods to a sample of solar-like oscillators observed with Kepler.

Oscillations in solar-like oscillators tend to follow an approximately regular pattern in which oscillation modes of a certain degree and consecutive order appear at regular intervals in frequency, i.e. the so-called large frequency separation. This is true to first order approximation for acoustic modes. However, to a second order approximation it is evident that the large frequency separation changes as a function of frequency. This frequency dependence has been seen in the Sun and in other main-sequence stars. However, from observations of giant stars, this effect seemed to be less pronounced. We investigate the difference in frequency dependence of the large frequency separation between main-sequence and giant stars using YREC evolutionary models.

Context: The Kepler space mission is reaching continuous observing times long enough to start studying the fine structure of the observed p-mode spectra. Aims: In this paper, we aim to study the signature of stellar evolution on the radial and p-dominated l=2 modes in an ensemble of red giants that show solar-type oscillations. Results: We find that the phase shift of the central radial mode (eps_c) is significantly different for red giants at a given large frequency separation (Dnu_c) but which burn only H in a shell (RGB) than those that have already ignited core He burning. Even though not directly probing the stellar core the pair of local seismic observables (Dnu_c, eps_c) can be used as an evolutionary stage discriminator that turned out to be as reliable as the period spacing of the mixed dipole modes. We find a tight correlation between eps_c and Dnu_c for RGB stars and no indication that eps_c depends on other properties of these stars. It appears that the difference in eps_c between the two populations becomes if we use an average of several radial orders, instead of a local, i.e. only around the central radial mode, Dnu to determine the phase shift. This indicates that the information on the evolutionary stage is encoded locally, in the shape of the radial mode sequence. This shape turns out to be approximately symmetric around the central radial mode for RGB stars but asymmetric for core He burning stars. We computed radial modes for a sequence of RG models and find them to qualitatively confirm our findings. We also find that, at least in our models, the local Dnu is an at least as good and mostly better proxy for both the asymptotic spacing and the large separation scaled from the model density than the average Dnu. Finally, we investigate the signature of the evolutionary stage on the small frequency separation and quantify the mass dependency of this seismic parameter.

We present a detailed spectroscopic study of 93 solar-type stars that are targets of the NASA/Kepler mission and provide detailed chemical composition of each target. We find that the overall metallicity is well-represented by Fe lines. Relative abundances of light elements (CNO) and alpha-elements are generally higher for low-metallicity stars. Our spectroscopic analysis benefits from the accurately measured surface gravity from the asteroseismic analysis of the Kepler light curves. The log g parameter is known to better than 0.03 dex and is held fixed in the analysis. We compare our Teff determination with a recent colour calibration of V-K (TYCHO V magnitude minus 2MASS Ks magnitude) and find very good agreement and a scatter of only 80 K, showing that for other nearby Kepler targets this index can be used. The asteroseismic log g values agree very well with the classical determination using Fe1-Fe2 balance, although we find a small systematic offset of 0.08 dex (asteroseismic log g values are lower). The abundance patterns of metals, alpha elements, and the light elements (CNO) show that a simple scaling by [Fe/H] is adequate to represent the metallicity of the stars, except for the stars with metallicity below -0.3, where alpha-enhancement becomes important. However, this is only important for a very small fraction of the Kepler sample. We therefore recommend that a simple scaling with [Fe/H] be employed in the asteroseismic analyses of large ensembles of solar-type stars.

We report for the first time a parametric fit to the pattern of the \ell = 1 mixed modes in red giants, which is a powerful tool to identify gravity-dominated mixed modes. With these modes, which share the characteristics of pressure and gravity modes, we are able to probe directly the helium core and the surrounding shell where hydrogen is burning. We propose two ways for describing the so-called mode bumping that affects the frequencies of the mixed modes. Firstly, a phenomenological approach is used to describe the main features of the mode bumping. Alternatively, a quasi-asymptotic mixed-mode relation provides a powerful link between seismic observations and the stellar interior structure. We used period \'echelle diagrams to emphasize the detection of the gravity-dominated mixed modes. The asymptotic relation for mixed modes is confirmed. It allows us to measure the gravity-mode period spacings in more than two hundred red giant stars. The identification of the gravity-dominated mixed modes allows us to complete the identification of all major peaks in a red giant oscillation spectrum, with significant consequences for the true identification of \ell = 3 modes, of \ell = 2 mixed modes, for the mode widths and amplitudes, and for the \ell = 1 rotational splittings. The accurate measurement of the gravity-mode period spacing provides an effective probe of the inner, g-mode cavity. The derived value of the coupling coefficient between the cavities is different for red giant branch and clump stars. This provides a probe of the hydrogen-shell burning region that surrounds the helium core. Core contraction as red giants ascend the red giant branch can be explored using the variation of the gravity-mode spacing as a function of the mean large separation.

The evolved solar-type stars 16 Cyg A & B have long been studied as solar analogs, yielding a glimpse into the future of our own Sun. The orbital period of the binary system is too long to provide meaningful dynamical constraints on the stellar properties, but asteroseismology can help because the stars are among the brightest in the Kepler field. We present an analysis of three months of nearly uninterrupted photometry of 16 Cyg A & B from the Kepler space telescope. We extract a total of 46 and 41 oscillation frequencies for the two components respectively, including a clear detection of octupole (l=3) modes in both stars. We derive the properties of each star independently using the Asteroseismic Modeling Portal, fitting the individual oscillation frequencies and other observational constraints simultaneously. We evaluate the systematic uncertainties from an ensemble of results generated by a variety of stellar evolution codes and fitting methods. The optimal models derived by fitting each component individually yield a common age (t=6.8+/-0.4 Gyr) and initial composition (Z_i=0.024+/-0.002, Y_i=0.25+/-0.01) within the uncertainties, as expected for the components of a binary system, bolstering our confidence in the reliability of asteroseismic techniques. The longer data sets that will ultimately become available will allow future studies of differential rotation, convection zone depths, and long-term changes due to stellar activity cycles.

Asteroseismology with the Kepler space telescope is providing not only an improved characterization of exoplanets and their host stars, but also a new window on stellar structure and evolution for the large sample of solar-type stars in the field. We perform a uniform analysis of 22 of the brightest asteroseismic targets with the highest signal-to-noise ratio observed for 1 month each during the first year of the mission, and we quantify the precision and relative accuracy of asteroseismic determinations of the stellar radius, mass, and age that are possible using various methods. We present the properties of each star in the sample derived from an automated analysis of the individual oscillation frequencies and other observational constraints using the Asteroseismic Modeling Portal (AMP), and we compare them to the results of model-grid-based methods that fit the global oscillation properties. We find that fitting the individual frequencies typically yields asteroseismic radii and masses to \sim1% precision, and ages to \sim2.5% precision (respectively 2, 5, and 8 times better than fitting the global oscillation properties). The absolute level of agreement between the results from different approaches is also encouraging, with model-grid-based methods yielding slightly smaller estimates of the radius and mass and slightly older values for the stellar age relative to AMP, which computes a large number of dedicated models for each star. The sample of targets for which this type of analysis is possible will grow as longer data sets are obtained during the remainder of the mission.

Solar-like oscillations have been observed by {{\it Kepler}} and CoRoT in several solar-type stars. We study the variations of stellar p-mode linewidth as a function of effective temperature. Time series of 9 months of Kepler data have been used. The power spectra of 42 cool main-sequence stars and subgiants have been analysed using both Maximum Likelihood Estimators and Bayesian estimators, providing individual mode characteristics such as frequencies, linewidths and mode heights. Here we report on the mode linewidth at maximum power and at maximum mode height for these 42 stars as a function of effective temperature. We show that the mode linewidth at either maximum mode height or maximum amplitude follows a scaling relation with effective temperature, which is a combination of a power law plus a lower bound. The typical power law index is about 13 for the linewidth derived from the maximum mode height, and about 16 for the linewidth derived from the maximum amplitude while the lower bound is about 0.3 microHz and 0.7 microHz, respectively. We stress that this scaling relation is only valid for the cool main-sequence stars and subgiants, and does not have predictive power outside the temperature range of these stars.

When the core hydrogen is exhausted during stellar evolution, the central region of a star contracts and the outer envelope expands and cools, giving rise to a red giant, in which convection occupies a large fraction of the star. Conservation of angular momentum requires that the cores of these stars rotate faster than their envelopes, and indirect evidence supports this. Information about the angular momentum distribution is inaccessible to direct observations, but it can be extracted from the effect of rotation on oscillation modes that probe the stellar interior. Here, we report the detection of non-rigid rotation in the interiors of red-giant stars by exploiting the rotational frequency splitting of recently detected mixed modes. We demonstrate an increasing rotation rate from the surface of the star to the stellar core. Comparing with theoretical stellar models, we conclude that the core must rotate at least ten times faster than the surface. This observational result confirms the theoretical prediction of a steep gradient in the rotation profile towards the deep stellar interior.

We present Kepler observations of the bright (V=8.3), oscillating star HD 179070. The observations show transit-like events which reveal that the star is orbited every 2.8 days by a small, 1.6 R_Earth object. Seismic studies of HD 179070 using short cadence Kepler observations show that HD 179070 has a frequencypower spectrum consistent with solar-like oscillations that are acoustic p-modes. Asteroseismic analysis provides robust values for the mass and radius of HD 179070, 1.34{\pm}0.06 M{\circ} and 1.86{\pm}0.04 R{\circ} respectively, as well as yielding an age of 2.84{\pm}0.34 Gyr for this F5 subgiant. Together with ground-based follow-up observations, analysis of the Kepler light curves and image data, and blend scenario models, we conservatively show at the >99.7% confidence level (3{\sigma}) that the transit event is caused by a 1.64{\pm}0.04 R_Earth exoplanet in a 2.785755{\pm}0.000032 day orbit. The exoplanet is only 0.04 AU away from the star and our spectroscopic observations provide an upper limit to its mass of ~10 M_Earth (2-{\sigma}). HD 179070 is the brightest exoplanet host star yet discovered by Kepler.

A search of the time-series photometry from NASA's Kepler spacecraft reveals a transiting planet candidate orbiting the 11th magnitude G5 dwarf KIC 10593626 with a period of 290 days. The characteristics of the host star are well constrained by high-resolution spectroscopy combined with an asteroseismic analysis of the Kepler photometry, leading to an estimated mass and radius of 0.970 +/- 0.060 MSun and 0.979 +/- 0.020 RSun. The depth of 492 +/- 10ppm for the three observed transits yields a radius of 2.38 +/- 0.13 REarth for the planet. The system passes a battery of tests for false positives, including reconnaissance spectroscopy, high-resolution imaging, and centroid motion. A full BLENDER analysis provides further validation of the planet interpretation by showing that contamination of the target by an eclipsing system would rarely mimic the observed shape of the transits. The final validation of the planet is provided by 16 radial velocities obtained with HIRES on Keck 1 over a one year span. Although the velocities do not lead to a reliable orbit and mass determination, they are able to constrain the mass to a 3{\sigma} upper limit of 124 MEarth, safely in the regime of planetary masses, thus earning the designation Kepler-22b. The radiative equilibrium temperature is 262K for a planet in Kepler-22b's orbit. Although there is no evidence that Kepler-22b is a rocky planet, it is the first confirmed planet with a measured radius to orbit in the Habitable Zone of any star other than the Sun.

Context. The advent of space-borne missions such as CoRoT or Kepler providing photometric data has brought new possibilities for asteroseismology across the H-R diagram. Solar-like oscillations are now observed in many stars, including red giants and main- sequence stars. Aims. Based on several hundred identified pulsating red giants, we aim to characterize their oscillation amplitudes and widths. These observables are compared with those of main-sequence stars in order to test trends and scaling laws for these parameters for both main-sequence stars and red giants. Methods. An automated fitting procedure is used to analyze several hundred Fourier spectra. For each star, a modeled spectrum is fitted to the observed oscillation spectrum, and mode parameters are derived. Results. Amplitudes and widths of red-giant solar-like oscillations are estimated for several hundred modes of oscillation. Amplitudes are relatively high (several hundred ppm) and widths relatively small (very few tenths of a {\mu}Hz). Conclusions. Widths measured in main-sequence stars show a different variation with the effective temperature than red giants. A single scaling law is derived for mode amplitudes of both red giants and main-sequence stars versus their luminosity to mass ratio. However, our results suggest that two regimes may also be compatible with the observations.

The G6 giant HR\,2582 (HD\,50890) was observed by CoRoT for approximately 55 days. Mode frequencies are extracted from the observed Fourier spectrum of the light curve. Numerical stellar models are then computed to determine the characteristics of the star (mass, age, etc...) from the comparison with observational constraints. We provide evidence for the presence of solar-like oscillations at low frequency, between 10 and 20\,$\mu$Hz, with a regular spacing of $(1.7\pm0.1)\mu$Hz between consecutive radial orders. Only radial modes are clearly visible. From the models compatible with the observational constraints used here, We find that HR\,2582 (HD\,50890) is a massive star with a mass in the range (3--\,5\,$M_{\odot}$), clearly above the red clump. It oscillates with rather low radial order ($n$ = 5\,--\,12) modes. Its evolutionary stage cannot be determined with precision: the star could be on the ascending red giant branch (hydrogen shell burning) with an age of approximately 155 Myr or in a later phase (helium burning). In order to obtain a reasonable helium amount, the metallicity of the star must be quite subsolar. Our best models are obtained with a mixing length significantly smaller than that obtained for the Sun with the same physical description (except overshoot). The amount of core overshoot during the main-sequence phase is found to be mild, of the order of 0.1\,$H_{\rm p}$.

Photometric observations made by the NASA Kepler Mission have led to a dramatic increase in the number of main-sequence and subgiant stars with detected solar-like oscillations. We present an ensemble asteroseismic analysis of 76 solar-type stars. Using frequencies determined from the Kepler time-series photometry, we have measured three asteroseismic parameters that characterize the oscillations: the large frequency separation (\Delta \nu), the small frequency separation between modes of l=0 and l=2 (\delta \nu_02), and the dimensionless offset (\epsilon). These measurements allow us to construct asteroseismic diagrams, namely the so-called C-D diagram of \delta \nu_02 versus \Delta \nu, and the recently re-introduced {\epsilon} diagram. We compare the Kepler results with previously observed solar-type stars and with theoretical models. The positions of stars in these diagrams places constraints on their masses and ages. Additionally, we confirm the observational relationship between {\epsilon} and T_eff that allows for the unambiguous determination of radial order and should help resolve the problem of mode identification in F stars.

We aim to describe the oscillation power excess observed in Kepler red giants, and to investigate empirical scaling relations governing these parameters. From these scalings relations, we derive new physical properties of red giant oscillations. Various different methods were compared in order to validate the processes and to derive reliable output values. For consistency, a single method was then used to determine scaling relations for the relevant global asteroseismic parameters: mean mode height, mean height of the background signal superimposed on the oscillation power excess, width of the power excess, bolometric amplitude of the radial modes and visibility of non-radial modes. A method for deriving oscillation amplitudes is proposed, which relies on the complete identification of the red giant oscillation spectrum. The comparison of the different methods has shown the important role of the way the background is modelled. The convergence reached by the collaborative work enables us to derive significant results concerning the oscillation power excess. We obtain several scaling relations, and identify the influence of the stellar mass and the evolutionary status. The effect of helium burning on the red giant interior structure is confirmed: it yields a strong mass-radius relation for clump stars. We find that none of the amplitude scaling relations motivated by physical considerations predict the observed mode amplitudes of red giant stars. In parallel, the degree-dependent mode visibility exhibits important variations. Both effects seem related to the significant influence of the high mode mass of non-radial mixed modes. A family of red giants with very weak dipole modes is identified, and its properties are analyzed.

More than 1000 red giants have been observed by NASA/Kepler mission during a nearly continuous period of ~ 13 months. The resulting high-frequency resolution (< 0.03 muHz) allows us to study the granulation parameters of these stars. The granulation pattern results from the convection motions leading to upward flows of hot plasma and downward flows of cooler plasma. We fitted Harvey-like functions to the power spectra, to retrieve the timescale and amplitude of granulation. We show that there is an anti-correlation between both of these parameters and the position of maximum power of acoustic modes, while we also find a correlation with the radius, which agrees with the theory. We finally compare our results with 3D models of the convection.

Having started science operations in May 2009, the Kepler photometer has been able to provide exquisite data of solar-like stars. Five out of the 42 stars observed continuously during the survey phase show evidence of oscillations, even though they are rather faint (magnitudes from 10.5 to 12). In this paper, we present an overview of the results of the seismic analysis of 4 of these stars observed during more than eight months.

The NASA Kepler mission is providing an unprecedented set of asteroseismic data. In particular, short-cadence lightcurves (~60s samplings), allow us to study solar-like stars covering a wide range of masses, spectral types and evolutionary stages. Oscillations have been observed in around 600 out of 2000 stars observed for one month during the survey phase of the Kepler mission. The measured light curves can present features related to the surface magnetic activity (starspots) and, thus we are able to obtain a good estimation of the surface (differential) rotation. In this work we establish the basis of such research and we show a potential method to find stars with fast surface rotations.

In addition to its search for extra-solar planets, the NASA Kepler Mission provides exquisite data on stellar oscillations. We report the detections of oscillations in 500 solartype stars in the Kepler field of view, an ensemble that is large enough to allow statistical studies of intrinsic stellar properties (such as mass, radius and age) and to test theories of stellar evolution. We find that the distribution of observed masses of these stars shows intriguing differences to predictions from models of synthetic stellar populations in the Galaxy.

Mass loss of red giant branch (RGB) stars is still poorly determined, despite its crucial role in the chemical enrichment of galaxies. Thanks to the recent detection of solar-like oscillations in G-K giants in open clusters with Kepler, we can now directly determine stellar masses for a statistically significant sample of stars in the old open clusters NGC6791 and NGC6819. The aim of this work is to constrain the integrated RGB mass loss by comparing the average mass of stars in the red clump (RC) with that of stars in the low-luminosity portion of the RGB (i.e. stars with L <~ L(RC)). Stellar masses were determined by combining the available seismic parameters numax and Dnu with additional photometric constraints and with independent distance estimates. We measured the masses of 40 stars on the RGB and 19 in the RC of the old metal-rich cluster NGC6791. We find that the difference between the average mass of RGB and RC stars is small, but significant (Delta M=0.09 +- 0.03 (random) +- 0.04 (systematic) Msun). Interestingly, such a small DeltaM does not support scenarios of an extreme mass loss for this metal-rich cluster. If we describe the mass-loss rate with Reimers' prescription, a first comparison with isochrones suggests that the observed DeltaM is compatible with a mass-loss efficiency parameter in the range 0.1 <~ eta <~ 0.3. Less stringent constraints on the RGB mass-loss rate are set by the analysis of the ~ 2 Gyr-old NGC6819, largely due to the lower mass loss expected for this cluster, and to the lack of an independent and accurate distance determination. In the near future, additional constraints from frequencies of individual pulsation modes and spectroscopic effective temperatures, will allow further stringent tests of the Dnu and numax scaling relations, which provide a novel, and potentially very accurate, means of determining stellar radii and masses.

We have analyzed solar-like oscillations in ~1700 stars observed by the Kepler Mission, spanning from the main-sequence to the red clump. Using evolutionary models, we test asteroseismic scaling relations for the frequency of maximum power (nu_max), the large frequency separation (Delta_nu) and oscillation amplitudes. We show that the difference of the Delta_nu-nu_max relation for unevolved and evolved stars can be explained by different distributions in effective temperature and stellar mass, in agreement with what is expected from scaling relations. For oscillation amplitudes, we show that neither (L/M)^s scaling nor the revised scaling relation by Kjeldsen & Bedding (2011) are accurate for red-giant stars, and demonstrate that a revised scaling relation with a separate luminosity-mass dependence can be used to calculate amplitudes from the main-sequence to red-giants to a precision of ~25%. The residuals show an offset particularly for unevolved stars, suggesting that an additional physical dependency is necessary to fully reproduce the observed amplitudes. We investigate correlations between amplitudes and stellar activity, and find evidence that the effect of amplitude suppression is most pronounced for subgiant stars. Finally, we test the location of the cool edge of the instability strip in the Hertzsprung-Russell diagram using solar-like oscillations and find the detections in the hottest stars compatible with a domain of hybrid stochastically excited and opacity driven pulsation.

The large frequency separation between modes of the same degree and consecutive orders in a star is approximately proportional to the square root of its mean density. To determine the large frequency separation as accurately as possible a mean large frequency separation computed over several orders is often used. It is, however, known that the large frequency separation varies with frequency in a second order effect. From observations it has been shown that this frequency dependence is more important for main-sequence stars than it is for red-giant stars. Here we use YREC models to verify and explain this observational result. We find that for stars with R > 8 Rsun the effect of the Helium second ionisation zone is relatively small. For these stars the deep location of the He II zone induces a frequency modulation covering only a few large separations, while the amplitude of the modulation is low due to the relatively weak and extended He II layer, causing a shallow wide depression in the first adiabatic exponent. For less evolved stars the He II zone is located closer to the surface, and it is more confined, i.e. a deep narrow depression in the first adiabatic exponent. This causes frequency modulations with relatively high amplitudes covering up to about 20 large separations, inducing a relatively large frequency modulation. Additionally, we find that for less evolved stars the He II zone is stronger and more localised for more massive stars and for stars with low metallicities further increasing the amplitude of the frequency modulation.

The granulation pattern that we observe on the surface of the Sun is due to hot plasma from the interior rising to the photosphere where it cools down, and descends back into the interior at the edges of granules. This is the visible manifestation of convection taking place in the outer part of the solar convection zone. Because red giants have deeper convection zones and more extended atmospheres than the Sun, we cannot a priori assume that granulation in red giants is a scaled version of solar granulation. Until now, neither observations nor 1D analytical convection models could put constraints on granulation in red giants. However, thanks to asteroseismology, this study can now be performed. The resulting parameters yield physical information about the granulation. We analyze \sim1000 red giants that have been observed by Kepler during 13 months. We fit the power spectra with Harvey-like profiles to retrieve the characteristics of the granulation (time scale tau_gran and power P_gran). We also introduce a new time scale, tau_eff, which takes into account that different slopes are used in the Harvey functions. We search for a correlation between these parameters and the global acoustic-mode parameter (the position of maximum power, nu_max) as well as with stellar parameters (mass, radius, surface gravity (log g) and effective temperature (T_eff)). We show that tau_eff nu_max^{-0.89} and P_gran nu_max^{-1.90}, which is consistent with the theoretical predictions. We find that the granulation time scales of stars that belong to the red clump have similar values while the time scales of stars in the red-giant branch are spread in a wider range. Finally, we show that realistic 3D simulations of the surface convection in stars, spanning the (T_eff, log g)-range of our sample of red giants, match the Kepler observations well in terms of trends.

We calculate precise stellar radii and surface gravities from the asteroseismic analysis of over 500 solar-type pulsating stars observed by the Kepler space telescope. These physical stellar properties are compared with those given in the Kepler Input Catalog (KIC), determined from ground-based multi-color photometry. For the stars in our sample, we find general agreement but we detect an average overestimation bias of 0.23 dex in the KIC determination of log (g) for stars with log (g)_KIC > 4.0 dex, and a resultant underestimation bias of up to 50% in the KIC radii estimates for stars with R_KIC < 2 R sun. Part of the difference may arise from selection bias in the asteroseismic sample; nevertheless, this result implies there may be fewer stars characterized in the KIC with R ~ 1 R sun than is suggested by the physical properties in the KIC. Furthermore, if the radius estimates are taken from the KIC for these affected stars and then used to calculate the size of transiting planets, a similar underestimation bias may be applied to the planetary radii.

Three red giants (HD 49566 (G5III), HD 169370 (K0III) and HD 169751 (K2III)) have been observed in the CoRoT seismo field and additional ground-based spectra have been acquired. We present preliminary results of a detailed study of these stars using the observational constraints from the spectra and CoRoT data, and models from the YREC stellar evolution code.

The successful launches of the CoRoT and Kepler space missions have led to the detections of solar-like oscillations in large samples of red-giant stars. The large numbers of red giants with observed oscillations make it possible to investigate the properties of the sample as a whole: ensemble asteroseismology. In this article we summarise ensemble asteroseismology results obtained from data released by the Kepler Science Team (~150,000 field stars) as presented by Hekker et al. (2011b) and for the clusters NGC 6791, NGC 6811 and NGC 6819 (Hekker et al. 2011a) and we discuss the importance of such studies.

The Kepler spacecraft is providing time series of photometric data with micromagnitude precision for hundreds of A-F type stars. We present a first general characterization of the pulsational behaviour of A-F type stars as observed in the Kepler light curves of a sample of 750 candidate A-F type stars. We propose three main groups to describe the observed variety in pulsating A-F type stars: gamma Dor, delta Sct, and hybrid stars. We assign 63% of our sample to one of the three groups, and identify the remaining part as rotationally modulated/active stars, binaries, stars of different spectral type, or stars that show no clear periodic variability. 23% of the stars (171 stars) are hybrid stars, which is a much larger fraction than what has been observed before. We characterize for the first time a large number of A-F type stars (475 stars) in terms of number of detected frequencies, frequency range, and typical pulsation amplitudes. The majority of hybrid stars show frequencies with all kinds of periodicities within the gamma Dor and delta Sct range, also between 5 and 10 c/d, which is a challenge for the current models. We find indications for the existence of delta Sct and gamma Dor stars beyond the edges of the current observational instability strips. The hybrid stars occupy the entire region within the delta Sct and gamma Dor instability strips, and beyond. Non-variable stars seem to exist within the instability strips. The location of gamma Dor and delta Sct classes in the (Teff,logg)-diagram has been extended. We investigate two newly constructed variables 'efficiency' and 'energy' as a means to explore the relation between gamma Dor and delta Sct stars. Our results suggest a revision of the current observational instability strips, and imply an investigation of other pulsation mechanisms to supplement the kappa mechanism and convective blocking effect to drive hybrid pulsations.

The evolved main-sequence Sun-like stars KIC 10273246 (F-type) and KIC 10920273 (G-type) were observed with the NASA Kepler satellite for approximately ten months with a duty cycle in excess of 90%. Such continuous and long observations are unprecedented for solar-type stars other than the Sun. We aimed mainly at extracting estimates of p-mode frequencies - as well as of other individual mode parameters - from the power spectra of the light curves of both stars, thus providing scope for a full seismic characterization. The light curves were corrected for instrumental effects in a manner independent of the Kepler Science Pipeline. Estimation of individual mode parameters was based both on the maximization of the likelihood of a model describing the power spectrum and on a classic prewhitening method. Finally, we employed a procedure for selecting frequency lists to be used in stellar modeling. A total of 30 and 21 modes of degree l=0,1,2 - spanning at least eight radial orders - have been identified for KIC 10273246 and KIC 10920273, respectively. Two avoided crossings (l=1 ridge) have been identified for KIC 10273246, whereas one avoided crossing plus another likely one have been identified for KIC 10920273. Good agreement is found between observed and predicted mode amplitudes for the F-type star KIC 10273246, based on a revised scaling relation. Estimates are given of the rotational periods, the parameters describing stellar granulation and the global asteroseismic parameters $\Delta\nu$ and $\nu_{\rm{max}}$.

Asteroseismology of solar-type stars has entered a new era of large surveys with the success of the NASA \textit{Kepler} mission, which is providing exquisite data on oscillations of stars across the Hertzprung-Russell (HR) diagram. From the time-series photometry, the two seismic parameters that can be most readily extracted are the large frequency separation ($\Delta\nu$) and the frequency of maximum oscillation power ($\nu_\mathrm{max}$). After the survey phase, these quantities are available for hundreds of solar-type stars. By scaling from solar values, we use these two asteroseismic observables to identify for the first time an evolutionary sequence of 1-M$_\odot$ field stars, without the need for further information from stellar models. Comparison of our determinations with the few available spectroscopic results shows an excellent level of agreement. We discuss the potential of the method for differential analysis throughout the main-sequence evolution, and the possibility of detecting twins of very well-known stars.

Studying star clusters offers significant advances in stellar astrophysics due to the combined power of having many stars with essentially the same distance, age, and initial composition. This makes clusters excellent test benches for verification of stellar evolution theory. To fully exploit this potential, it is vital that the star sample is uncontaminated by stars that are not members of the cluster. Techniques for determining cluster membership therefore play a key role in the investigation of clusters. We present results on three clusters in the Kepler field of view based on a newly established technique that uses asteroseismology to identify fore- or background stars in the field, which demonstrates advantages over classical methods such as kinematic and photometry measurements. Four previously identified seismic non-members in NGC6819 are confirmed in this study, and three additional non-members are found -- two in NGC6819 and one in NGC6791. We further highlight which stars are, or might be, affected by blending, which needs to be taken into account when analysing these Kepler data.

Scaling relations that link asteroseismic quantities to global stellar properties are important for gaining understanding of the intricate physics that underpins stellar pulsation. The common notion that all stars in an open cluster have essentially the same distance, age, and initial composition, implies that the stellar parameters can be measured to much higher precision than what is usually achievable for single stars. This makes clusters ideal for exploring the relation between the mode amplitude of solar-like oscillations and the global stellar properties. We have analyzed data obtained with NASA's Kepler space telescope to study solar-like oscillations in 100 red giant stars located in either of the three open clusters, NGC 6791, NGC 6819, and NGC 6811. By fitting the measured amplitudes to predictions from simple scaling relations that depend on luminosity, mass, and effective temperature, we find that the data cannot be described by any power of the luminosity-to-mass ratio as previously assumed. As a result we provide a new improved empirical relation which treats luminosity and mass separately. This relation turns out to also work remarkably well for main-sequence and subgiant stars. In addition, the measured amplitudes reveal the potential presence of a number of previously unknown unresolved binaries in the red clump in NGC 6791 and NGC 6819, pointing to an interesting new application for asteroseismology as a probe into the formation history of open clusters.

The CoRoT mission has provided thousands of red-giant light curves. The analysis of their solar-like oscillations allows us to characterize their stellar properties. Up to now, the global seismic parameters of the pressure modes remain unable to distinguish red-clump giants from members of the red-giant branch. As recently done with Kepler red giants, we intend to analyze and use the so-called mixed modes to determine the evolutionary status of the red giants observed with CoRoT. We also aim at deriving different seismic characteristics depending on evolution. The complete identification of the pressure eigenmodes provided by the red-giant universal oscillation pattern allows us to aim at the mixed modes surrounding the l=1 expected eigenfrequencies. A dedicated method based on the envelope autocorrelation function is proposed to analyze their period separation. We have identified the mixed-mode signature separation thanks to their pattern compatible with the asymptotic law of gravity modes. We have shown that, independent of any modelling, the g-mode spacings help to distinguish the evolutionary status of a red-giant star. We then report different seismic and fundamental properties of the stars, depending on their evolutionary status. In particular, we show that high-mass stars of the secondary clump present very specific seismic properties. We emphasize that stars belonging to the clump were affected by significant mass loss. We also note significant population and/or evolution differences in the different fields observed by CoRoT.

We present the results of the asteroseismic analysis of the red-giant star KIC 4351319 (TYC 3124-914-1), observed for 30 days in short-cadence mode with the Kepler satellite. The analysis has allowed us to determine the large and small frequency separations, and the frequency of maximum oscillation power. The high signal-to-noise ratio of the observations allowed us to identify 25 independent pulsation modes whose frequencies range approximately from 300 to 500 muHz. The observed oscillation frequencies together with the accurate determination of the atmospheric parameters (effective temperature, gravity and metallicity), provided by additional ground-based spectroscopic observations, enabled us to theoretically interpret the observed oscillation spectrum. KIC 4351319 appears to oscillate with a well defined solar-type p-modes pattern due to radial acoustic modes and non-radial nearly pure p modes. In addition, several non-radial mixed modes have been identified. Theoretical models well reproduce the observed oscillation frequencies and indicate that this star, located at the base of the ascending red-giant branch, is in the hydrogen-shell burning phase, with a mass of about 1.3 solar masses, a radius of about 3.4 solar radii and an age of about 5.6 Gyr. The main parameters of this star have been determined with an unprecedent level of precision for a red-giant star, with uncertainties of 2% for mass, 7% for age, 1% for radius, and 4% for luminosity.

We present the asteroseismic analysis of 1948 F-, G- and K-type main-sequence and subgiant stars observed by the NASA {\em Kepler Mission}. We detect and characterise solar-like oscillations in 642 of these stars. This represents the largest cohort of main-sequence and subgiant solar-like oscillators observed to date. The photometric observations are analysed using the methods developed by nine independent research teams. The results are combined to validate the determined global asteroseismic parameters and calculate the relative precision by which the parameters can be obtained. We correlate the relative number of detected solar-like oscillators with stellar parameters from the {\em Kepler Input Catalog} and find a deficiency for stars with effective temperatures in the range $5300 \lesssim T_\mathrm{eff} \lesssim 5700$\,K and a drop-off in detected oscillations in stars approaching the red edge of the classical instability strip. We compare the power-law relationships between the frequency of peak power, $\nu_\mathrm{max}$, the mean large frequency separation, $\Delta\nu$, and the maximum mode amplitude, $A_\mathrm{max}$, and show that there are significant method-dependent differences in the results obtained. This illustrates the need for multiple complementary analysis methods to be used to assess the robustness and reproducibility of results derived from global asteroseismic parameters.

Context: Four open clusters are present in the Kepler field of view and timeseries of nearly a year in length are now available. These timeseries allow us to derive asteroseismic global oscillation parameters of red-giant stars in the three open clusters NGC 6791, NGC 6819 and NGC 6811. From these parameters and effective temperatures, we derive mass, radii and luminosities for the clusters as well as field red giants. Aims: We study the influence of evolution and metallicity on the observed red-giant populations. Methods: The global oscillation parameters are derived using different published methods and the effective temperatures are derived from 2MASS colours. The observational results are compared with BaSTI evolution models. Results: We find that the mass has significant influence on the asteroseismic quantities delta_nu vs. nu_max relation, while the influence of metallicity is negligible, under the assumption that the metallicity does not affect the excitation / damping of the oscillations. The positions of the stars in the H-R diagram depend on both mass and metallicity. Furthermore, the stellar masses derived for the field stars are bracketed by those of the cluster stars. Conclusions: Both the mass and metallicity contribute to the observed difference in locations in the H-R diagram of the old metal-rich cluster NGC 6791 and the middle-aged solar-metallicity cluster NGC 6819. For the young cluster NGC 6811, the explanation of the position of the stars in the H-R diagram challenges the assumption of solar metallicity, and this open cluster might have significantly lower metallicity [Fe/H] in the range -0.3 to -0.7 dex. Also, nearly all the observed field stars seem to be older than NGC 6811 and younger than NGC 6791.

We use photometric observations of solar-type stars, made by the NASA Kepler Mission, to conduct a statistical study of the impact of stellar surface activity on the detectability of solar-like oscillations. We find that the number of stars with detected oscillations fall significantly with increasing levels of activity. The results present strong evidence for the impact of magnetic activity on the properties of near-surface convection in the stars, which appears to inhibit the amplitudes of the stochastically excited, intrinsically damped solar-like oscillations.

Red giants are evolved stars that have exhausted the supply of hydrogen in their cores and instead burn hydrogen in a surrounding shell. Once a red giant is sufficiently evolved, the helium in the core also undergoes fusion. Outstanding issues in our understanding of red giants include uncertainties in the amount of mass lost at the surface before helium ignition and the amount of internal mixing from rotation and other processes. Progress is hampered by our inability to distinguish between red giants burning helium in the core and those still only burning hydrogen in a shell. Asteroseismology offers a way forward, being a powerful tool for probing the internal structures of stars using their natural oscillation frequencies. Here we report observations of gravity-mode period spacings in red giants that permit a distinction between evolutionary stages to be made. We use high-precision photometry obtained with the Kepler spacecraft over more than a year to measure oscillations in several hundred red giants. We find many stars whose dipole modes show sequences with approximately regular period spacings. These stars fall into two clear groups, allowing us to distinguish unambiguously between hydrogen-shell-burning stars (period spacing mostly about 50 seconds) and those that are also burning helium (period spacing about 100 to 300 seconds).

We analyze the photometric short-cadence data obtained with the Kepler Mission during the first eight months of observations of two solar-type stars of spectral types G and F: KIC 11395018 and KIC 11234888 respectively, the latter having a lower signal-to-noise ratio compared to the former. We estimate global parameters of the acoustic (p) modes such as the average large and small frequency separations, the frequency of the maximum of the p-mode envelope and the average linewidth of the acoustic modes. We were able to identify and to measure 22 p-mode frequencies for the first star and 16 for the second one even though the signal-to-noise ratios of these stars are rather low. We also derive some information about the stellar rotation periods from the analyses of the low-frequency parts of the power spectral densities. A model-independent estimation of the mean density, mass and radius are obtained using the scaling laws. We emphasize the importance of continued observations for the stars with low signal-to-noise ratio for an improved characterization of the oscillation modes. Our results offer a preview of what will be possible for many stars with the long data sets obtained during the remainder of the mission.

Asteroseismology of solar-type stars has an important part to play in the exoplanet program of the NASA Kepler Mission. Precise and accurate inferences on the stellar properties that are made possible by the seismic data allow very tight constraints to be placed on the exoplanetary systems. Here, we outline how to make an estimate of the detectability of solar-like oscillations in any given Kepler target, using rough estimates of the temperature and radius, and the Kepler apparent magnitude.

The Kepler mission is providing photometric data of exquisite quality for the asteroseismic study of different classes of pulsating stars. These analyses place particular demands on the pre-processing of the data, over a range of timescales from minutes to months. Here, we describe processing procedures developed by the Kepler Asteroseismic Science Consortium (KASC) to prepare light curves that are optimized for the asteroseismic study of solar-like oscillating stars in which outliers, jumps and drifts are corrected.

The first public release of long-cadence stellar photometric data collected by the NASA Kepler mission has now been made available. In this paper we characterise the red-giant (G-K) stars in this large sample in terms of their solar-like oscillations. We use published methods and well-known scaling relations in the analysis. Just over 70% of the red giants in the sample show detectable solar-like oscillations, and from these oscillations we are able to estimate the fundamental properties of the stars. This asteroseismic analysis reveals different populations: low-luminosity H-shell burning red-giant branch stars, cool high-luminosity red giants on the red-giant branch and He-core burning clump and secondary-clump giants.

We present initial results on some of the properties of open clusters NGC 6791 and NGC 6819 derived from asteroseismic data obtained by NASA's Kepler mission. In addition to estimating the mass, radius and log g of stars on the red-giant branch of these clusters, we estimate the distance to the clusters and their ages. Our model-independent estimate of the distance modulus of NGC 6791 is (m-M)_0= 13.11\pm 0.06. We find (m-M)_0= 11.85\pm 0.05 for NGC 6819. The average mass of stars on the red-giant branch of NGC 6791 is 1.20 \pm 0.01 M_sun, while that of NGC 6819 is 1.68\pm 0.03M_sun. It should be noted that we do not have data that cover the entire red-giant branch and the actual mass will be somewhat lower. We have determined model-dependent estimates of ages of these clusters. We find ages between 6.8 and 8.6 Gyr for NGC 6791, however, most sets of models give ages around 7Gyr. We obtain ages between 2 and 2.4 Gyr for NGC 6819.

The CoRoT and Kepler satellites have provided thousands of red-giant oscillation spectra. The analysis of these spectra requires efficient methods for identifying all eigenmode parameters. The assumption of new scaling laws allows us to construct a theoretical oscillation pattern. We then obtain a highly precise determination of the large separation by correlating the observed patterns with this reference. We demonstrate that this pattern is universal and are able to unambiguously assign the eigenmode radial orders and angular degrees. This solves one of the current outstanding problems of asteroseismology hence allowing precise theoretical investigation of red-giant interiors.

Clear power excess in a frequency range typical for solar-type oscillations in red giants has been detected in more than 1000 stars, which have been observed during the first 138 days of the science operation of the NASA Kepler satellite. This sample includes stars in a wide mass and radius range with spectral types G and K, extending in luminosity from the bottom of the giant branch up to high-luminous red giants. The high-precision asteroseismic observations with Kepler provide a perfect source for testing stellar structure and evolutionary models, as well as investigating the stellar population in our Galaxy. We fit a global model to the observed frequency spectra, which allows us to accurately estimate the granulation background signal and the global oscillation parameters, such as the frequency of maximum oscillation power. We find regular patterns of radial and non-radial oscillation modes and use a new technique to automatically identify the mode degree and the characteristic frequency separations between consecutive modes of the same spherical degree. In most cases, we can also measure the small separation. The seismic parameters are used to estimate stellar masses and radii and to place the stars in an H-R diagram by using an extensive grid of stellar models that covers a wide parameter range. Using Bayesian techniques throughout our analysis allows us to determine reliable uncertainties for all parameters. We provide accurate seismic parameters and their uncertainties for a large sample of red giants and determine their asteroseismic fundamental parameters. We investigate the influence of the stars' metallicities on their positions in the H-R diagram. We study the red-giant populations in the red clump and bump and compare them to a synthetic population and find a mass and metallicity gradient in the red clump and clear evidence of a secondary-clump population.

We have studied solar-like oscillations in ~800 red-giant stars using Kepler long-cadence photometry. The sample includes stars ranging in evolution from the lower part of the red-giant branch to the Helium main sequence. We investigate the relation between the large frequency separation (Delta nu) and the frequency of maximum power (nu_max) and show that it is different for red giants than for main-sequence stars, which is consistent with evolutionary models and scaling relations. The distributions of nu_max and Delta nu are in qualitative agreement with a simple stellar population model of the Kepler field, including the first evidence for a secondary clump population characterized by M ~> 2 M_sun and nu_max ~ 40-110 muHz. We measured the small frequency separations delta nu_02 and delta nu_01 in over 400 stars and delta nu_03 in over 40. We present C-D diagrams for l=1, 2 and 3 and show that the frequency separation ratios delta nu_02/Delta nu and delta nu_01/Delta nu have opposite trends as a function of Delta nu. The data show a narrowing of the l=1 ridge towards lower nu_max, in agreement with models predicting more efficient mode trapping in stars with higher luminosity. We investigate the offset epsilon in the asymptotic relation and find a clear correlation with Delta nu, demonstrating that it is related to fundamental stellar parameters. Finally, we present the first amplitude-nu_max relation for Kepler red giants. We observe a lack of low-amplitude stars for nu_max ~> 110 muHz and find that, for a given nu_max between 40-110 muHz, stars with lower Delta nu (and consequently higher mass) tend to show lower amplitudes than stars with higher Delta nu.

The primary science goal of the Kepler Mission is to provide a census of exoplanets in the solar neighborhood, including the identification and characterization of habitable Earth-like planets. The asteroseismic capabilities of the mission are being used to determine precise radii and ages for the target stars from their solar-like oscillations. Chaplin et al. (2010) published observations of three bright G-type stars, which were monitored during the first 33.5 days of science operations. One of these stars, the subgiant KIC 11026764, exhibits a characteristic pattern of oscillation frequencies suggesting that it has evolved significantly. We have derived asteroseismic estimates of the properties of KIC 11026764 from Kepler photometry combined with ground-based spectroscopic data. We present the results of detailed modeling for this star, employing a variety of independent codes and analyses that attempt to match the asteroseismic and spectroscopic constraints simultaneously. We determine both the radius and the age of KIC 11026764 with a precision near 1%, and an accuracy near 2% for the radius and 15% for the age. Continued observations of this star promise to reveal additional oscillation frequencies that will further improve the determination of its fundamental properties.

The large number of stars for which uninterrupted high-precision photometric timeseries data are being collected with \textit{Kepler} and CoRoT initiated the development of automated methods to analyse the stochastically excited oscillations in main-sequence, subgiant and red-giant stars. Aims: We investigate the differences in results for global oscillation parameters of G and K red-giant stars due to different methods and definitions. We also investigate uncertainties originating from the stochastic nature of the oscillations. Methods: For this investigation we use Kepler data obtained during the first four months of operation. These data have been analysed by different groups using already published methods and the results are compared. We also performed simulations to investigate the uncertainty on the resulting parameters due to different realizations of the stochastic signal. Results: We obtain results for the frequency of maximum oscillation power (nu_max) and the mean large separation (<delta nu>) from different methods for over one thousand red-giant stars. The results for these parameters agree within a few percent and seem therefore robust to the different analysis methods and definitions used here. The uncertainties for nu_max and <delta nu> due to differences in realization noise are not negligible and should be taken into account when using these results for stellar modelling.

We report on the first asteroseismic analysis of solar-type stars observed by Kepler. Observations of three G-type stars, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation can clearly be distinguished in each star. We discuss the appearance of the oscillation spectra, including the presence of a possible signature of faculae, and the presence of mixed modes in one of the three stars.

Over the past decade the study of solar-like oscillations in red-giant stars has developed significantly. Not only the number of red-giant stars for which solar-like oscillations have been observed has increased, but the quality of these observations has improved as well. These steps forward were possible thanks to the development of instrumentation to measure radial velocity variations with a precision of the order of m/s, as well as the launch of dedicated space missions, which provide timeseries of data with unprecedented photometric precision. Many more exciting discoveries are to be expected in the (near) future. This article provides an overview of the development of the field over the last decade, discusses difficulties encountered and overcome in interpreting the observational data, and addresses some challenges and opportunities for further research.

We present a brief overview of the history of attempts to obtain a clear detection of solar-like oscillations in cluster stars, and discuss the results on the first clear detection, which was made by the Kepler Asteroseismic Science Consortium (KASC) Working Group 2.

Long timeseries of data increase the frequency resolution in the power spectrum. This allows for resolving stochastically excited modes with long mode lifetimes, as well as features that are close together in frequency. The CoRoT fields observed during the initial run and second long run partly overlap, and stars in this overlapping field observed in both runs are used to create timeseries with a longer timespan than available from the individual runs. We aim to measure the mode lifetimes of red giants and compare them with theoretical predictions. We also investigate the dependence of the mode lifetimes on frequency and the degree of the oscillation modes. We perform simulations to investigate the influence of the gap in the data between the initial and second long run, the total length of the run and the signal-to-noise ratio on the measured mode lifetime. This provides us with a correction factor to apply to the mode lifetimes measured from a maximum likelihood fit to the oscillation frequencies. We find that the length of the timeseries, the signal-to-noise ratio and possible gaps do have a non-negligible effect on the measurements of the mode lifetime of stochastically excited oscillation modes, but that we can correct for it. For the four stars for which we can perform a fit of the oscillation frequencies, we find that the mode lifetimes depend on frequency and on degree of the mode, which is in quantitative agreement with theoretical predictions.

Asteroseismology is able to conduct studies on the interiors of solar-type stars from the analysis of stellar acoustic spectra. However, such an analysis process often has to rely upon subjective choices made throughout. A recurring problem is to determine whether a signal in the acoustic spectrum originates from a radial or a dipolar oscillation mode. In order to overcome this problem, we present a procedure for modelling and fitting the autocovariance of the power spectrum which can be used to obtain global seismic parameters of solar-type stars, doing so in an automated fashion without the need to make subjective choices. From the set of retrievable global seismic parameters we emphasize the mean small frequency separation and, depending on the intrinsic characteristics of the power spectrum, the mean rotational frequency splitting. Since this procedure is automated, it can serve as a useful tool in the analysis of the more than one thousand solar-type stars expected to be observed as part of the Kepler Asteroseismic Investigation (KAI). We apply the aforementioned procedure to simulations of the Sun. Assuming different apparent magnitudes, we address the issues of how accurately and how precisely we can retrieve the several global seismic parameters were the Sun to be observed as part of the KAI.

The CoRoT mission is in its third year of observation and the data from the second long run in the galactic centre direction are being analysed. The solar-like oscillating stars that have been observed up to now have given some interesting results, specially concerning the amplitudes that are lower than predicted. We present here the results from the analysis of the star HD 170987.The goal of this research work is to characterise the global parameters of HD 170987. We look for global seismic parameters such as the mean large separation, maximum amplitude of the modes, and surface rotation because the signal-to-noise ratio in the observations do not allow us to measure individual modes. We also want to retrieve the stellar parameters of the star and its chemical composition.We have studied the chemical composition of the star using ground-based observations performed with the NARVAL spectrograph. We have used several methods to calculate the global parameters from the acoustic oscillations based on CoRoT data. The light curve of the star has been interpolated using inpainting algorithms to reduce the effect of data gaps. We find power excess related to p modes in the range [400 - 1200]muHz with a mean large separation of 55.2+-0.8muHz with a probability above 95% that increases to 55.9 +-0.2muHz in a higher frequency range [500 - 1250] muHz and a rejection level of 1%. A hint of the variation of this quantity with frequency is also found. The rotation period of the star is estimated to be around 4.3 days with an inclination axis of i=50 deg +20/-13. We measure a bolometric amplitude per radial mode in a range [2.4 - 2.9] ppm around 1000 muHz. Finally, using a grid of models, we estimate the stellar mass, M=1.43+-0.05 Msun, the radius, R=1.96+-0.046 Rsun, and the age ~2.4 Gyr.

The CoRoT 5-month long observation runs give us the opportunity to analyze a large variety of red-giant stars and to derive fundamental stellar parameters from their asteroseismic properties. We perform an analysis of more than 4\,600 CoRoT light curves to extract as much information as possible. We take into account the characteristics of the star sample and of the method in order to provide asteroseismic results as unbiased as possible. We also study and compare the properties of red giants of two opposite regions of the Galaxy. We analyze the time series with the envelope autocorrelation function in order to extract precise asteroseismic parameters with reliable error bars. We examine first the mean large frequency separation of solar-like oscillations and the frequency of maximum seismic amplitude, then the parameters of the excess power envelope. With the additional information of the effective temperature, we derive the stellar mass and radius. We have identified more than 1\,800 red giants among the 4\,600 light curves and have obtained accurate distributions of the stellar parameters for about 930 targets. We were able to reliably measure the mass and radius of several hundred red giants. We have derived precise information on the stellar population distribution and on the red clump. Comparison between the stars observed in two different fields shows that the stellar asteroseismic properties are globally similar, but with different characteristics for red-clump stars. This study shows the efficiency of statistical asteroseismology: validating scaling relations allows us to infer fundamental stellar parameters, to derive precise information on the red-giant evolution and interior structure and to analyze and compare stellar populations from different fields.

We have analyzed data from a multi-site campaign to observe oscillations in the F5 star Procyon. The data consist of high-precision velocities that we obtained over more than three weeks with eleven telescopes. A new method for adjusting the data weights allows us to suppress the sidelobes in the power spectrum. Stacking the power spectrum in a so-called echelle diagram reveals two clear ridges that we identify with even and odd values of the angular degree (l=0 and 2, and l=1 and 3, respectively). We interpret a strong, narrow peak at 446 muHz that lies close to the l=1 ridge as a mode with mixed character. We show that the frequencies of the ridge centroids and their separations are useful diagnostics for asteroseismology. In particular, variations in the large separation appear to indicate a glitch in the sound-speed profile at an acoustic depth of about 1000 s. We list frequencies for 55 modes extracted from the data spanning 20 radial orders, a range comparable to the best solar data, which will provide valuable constraints for theoretical models. A preliminary comparison with published models shows that the offset between observed and calculated frequencies for the radial modes is very different for Procyon than for the Sun and other cool stars. We find the mean lifetime of the modes in Procyon to be 1.29 +0.55/-0.49 days, which is significantly shorter than the 2-4 days seen in the Sun.

Since solar-like oscillations were first detected in red-giant stars, the presence of non-radial oscillation modes has been debated. Spectroscopic line-profile analysis was used in the first attempt to perform mode identification, which revealed that non-radial modes are observable. Despite the fact that the presence of non-radial modes could be confirmed, the degree or azimuthal order could not be uniquely identified. Here we present an improvement to this first spectroscopic line-profile analysis. Aims: We aim to study line-profile variations of stochastically excited solar-like oscillations in four evolved stars to derive the azimuthal order of the observed mode and the surface rotational frequency. Methods: Spectroscopic line-profile analysis is applied to cross-correlation functions, using the Fourier Parameter Fit method on the amplitude and phase distributions across the profiles. Results: For four evolved stars, beta Hydri (G2IV), epsilon Ophiuchi (G9.5III), eta Serpentis (K0III) and delta Eridani (K0IV) the line-profile variations reveal the azimuthal order of the oscillations with an accuracy of ~1. Furthermore, our analysis reveals the projected rotational velocity and the inclination angle. From these parameters we obtain the surface rotational frequency. Conclusions: We conclude that line-profile variations of cross-correlation functions behave differently for different frequencies and that they provide additional information in terms of the surface rotational frequency and azimuthal order.

Observations of red (G-K)-giant stars with the CoRoT satellite provide unprecedented information on the stochastically excited oscillations in these stars. The long time series of nearly uninterrupted high-cadence and high-precision photometry revealed the presence of non-radial modes with long lifetimes, which opens the possibility to perform asteroseismology on these stars. Also, the large number of red giants, for which solar-like oscillations are now observed, allows for a more statistical investigation of the characteristics of solar-like oscillations in red giants.

We have measured solar-like oscillations in red giants using time-series photometry from the first 34 days of science operations of the Kepler Mission. The light curves, obtained with 30-minute sampling, reveal clear oscillations in a large sample of G and K giants, extending in luminosity from the red clump down to the bottom of the giant branch. We confirm a strong correlation between the large separation of the oscillations (Delta nu) and the frequency of maximum power (nu_max). We focus on a sample of 50 low-luminosity stars (nu_max > 100 muHz, L <~ 30 L_sun) having high signal-to-noise ratios and showing the unambiguous signature of solar-like oscillations. These are H-shell-burning stars, whose oscillations should be valuable for testing models of stellar evolution and for constraining the star-formation rate in the local disk. We use a new technique to compare stars on a single echelle diagram by scaling their frequencies and find well-defined ridges corresponding to radial and non-radial oscillations, including clear evidence for modes with angular degree l=3. Measuring the small separation between l=0 and l=2 allows us to plot the so-called C-D diagram of delta nu_02 versus Delta nu. The small separation delta nu_01 of l=1 from the midpoint of adjacent l=0 modes is negative, contrary to the Sun and solar-type stars. The ridge for l=1 is notably broadened, which we attribute to mixed modes, confirming theoretical predictions for low-luminosity giants. Overall, the results demonstrate the tremendous potential of Kepler data for asteroseismology of red giants.

We present preliminary asteroseismic results from Kepler on three G-type stars. The observations, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation may be clearly distinguished in each star. We discuss the appearance of the oscillation spectra, use the frequencies and frequency separations to provide first results on the radii, masses and ages of the stars, and comment in the light of these results on prospects for inference on other solar-type stars that Kepler will observe.

Convection in red giant stars excites resonant acoustic waves whose frequencies depend on the sound speed inside the star, which in turn depends on the properties of the stellar interior. Therefore, asteroseismology is the most robust available method for probing the internal structure of red giant stars. Solar-like oscillations in the red giant HR7349 are investigated. Our study is based on a time series of 380760 photometric measurements spread over 5 months obtained with the CoRoT satellite. Mode parameters were estimated using maximum likelihood estimation of the power spectrum. The power spectrum of the high-precision time series clearly exhibits several identifiable peaks between 19 and 40 uHz showing regularity with a mean large and small spacing of Dnu = 3.47+-0.12 uHz and dnu_02 = 0.65+-0.10 uHz. Nineteen individual modes are identified with amplitudes in the range from 35 to 115 ppm. The mode damping time is estimated to be 14.7+4.7-2.9 days.