Discovered in October 2017, the interstellar object designated 1I/'Oumuamua was the first such object to be observed travelling through our solar system. 1I/'Oumuamua has other characteristics never seen before in a celestial body and in-situ observations and measurements would be of extraordinary scientific value. Previous studies have demonstrated the viability of spacecraft trajectories to 'Oumuamua using chemical propulsion with a Solar Oberth burn at a perihelion as low as a few solar radii. In addition to chemical propulsion, there is also the possibility of missions involving light sails accelerated by the radiation pressure of a laser beam from a laser located on Earth. Based on a scaled-down Breakthrough Starshot beaming infrastructure, interplanetary missions and missions to the outer solar system have been proposed using lower sailcraft speeds of 0.001c relaxing the laser power requirements (3-30 GW for 1-100 kg spacecraft) and various other mission constraints. This paper uses the OITS trajectory simulation tool, which assumes an impulsive $\Delta$V increment, to analyze the trajectories which might be followed by a sailcraft to 'Oumuamua, with a launch in the year 2030 and assuming it has already been accelerated to a maximum speed of 300km/s (approx. 0.001c) by the laser. A minimum flight duration of 440 days for a launch in July 2030 is found. The intercept would take place beyond 82 AU. We conclude that the possibility of launching a large number of spacecraft and reaching 1I much faster than chemical propulsion would circumvent several disadvantages of previously proposed mission architectures.

The miniaturization of electronic and mechanical components has allowed for an unprecedented downscaling of spacecraft size and mass. Today, spacecraft with a mass between 1 to 10 grams, AttoSats, have been developed and operated in space. Due to their small size, they introduce a new paradigm in spacecraft design, relying on agile development, rapid iterations, and massive redundancy. However, no systematic survey of the potential advantages and unique mission concepts based on AttoSats exists. This paper explores the potential of AttoSats for future space missions. First, we present the state of the art of AttoSats. Next, we identify unique AttoSat characteristics and map them to future mission capabilities. Finally, we go beyond AttoSats and explore how smart dust and nano-scale spacecraft could allow for even smaller spacecraft in the milligram range: zepto- and yocto spacecraft.

A potential second interstellar object C/2019 Q4 (Borisov) was discovered after the first known interstellar object 1I/'Oumuamua. Can we send a spacecraft to this object, using existing technologies? In this paper, we assess the technical feasibility of a mission to C/2019 Q4 (Borisov), using existing technologies. We apply the Optimum Interplanetary Trajectory Software (OITS) tool to generate trajectories to C/2019 Q4 (Borisov). As results, we get the minimal DeltaV trajectory with a launch date in July 2018. For this trajectory, a Falcon Heavy launcher could have hauled a 2 ton spacecraft to C/2019 Q4 (Borisov). For a later launch date, results for a combined powered Jupiter flyby with a Solar Oberth maneuver are presented. For a launch in 2030, we could reach C/2019 Q4 (Borisov) in 2045, using the Space Launch System, up-scaled Parker probe heatshield technology, and solid propulsion engines. A CubeSat-class spacecraft with a mass of 3 kg could be sent to C/2019 Q4 (Borisov). If C/2019 Q4 (Borisov) turns out to be indeed an interstellar object, its discovery shortly after the discovery of 1I/'Oumuamua implies that the next interstellar object might be discovered in the near future. The feasibility of a mission to both, 1I/'Oumuamua and C/2019 Q4 (Borisov) using existing technologies indicates that missions to further interstellar objects are likely to be feasible as well.

Asteroid mining has been proposed as an approach to complement Earth-based supplies of rare earth metals and supplying resources in space, such as water. However, existing studies on the economic viability of asteroid mining have remained rather simplistic and do not provide much guidance on which technological improvements would be needed for increasing its economic viability. This paper develops a techno-economic analysis of asteroid mining with the objective of providing recommendations for future technology development and performance improvements. Both, in-space resource provision such as water and return of platinum to Earth are considered. Starting from first principles of techno-economic analysis, gradually additional economic and technological factors are added to the analysis model. Applied to mining missions involving spacecraft reuse, learning curve effect, and multiple spacecraft, their economic viability is assessed. A sensitivity analysis with respect to throughput rate, spacecraft mass, and resource price is performed. Furthermore, a sample asteroid volatile mining architecture based on small CubeSat-class spacecraft is presented. It is concluded that key technological drivers for asteroid mining missions are throughput rate, number of spacecraft per mission, and the rate in which successive missions are conducted.

This paper discusses the physics, engineering and mission architecture relating to a gram-sized interstellar probe propelled by a laser beam. The objectives are to design a fly-by mission to Alpha Centauri with a total mission duration of 50 years travelling at a cruise speed of 0.1c. Furthermore, optical data from the target star system is to be obtained and sent back to the Solar system. The main challenges of such a mission are presented and possible solutions proposed. The results show that by extrapolating from currently existing technology, such a mission would be feasible. The total mass of the proposed spacecraft is 23g and the space-based laser infrastructure has a beam power output of 15GW. Rurther exploration of the laser - spacecraft tradespace and associated technologies are necessary.