ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel.

The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the Milky Way through a detailed chemical abundance study of one million stars. The spectrograph is based at the AAT and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses volume phase holographic gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 and 50,000 using a slit mask. The GALAH survey requires an SNR greater than 100 for a star brightness of V ?= 14 in an exposure time of one hour. The total spectral coverage of the four channels is about 100 nm between 370 and 1000 nm for up to 392 simultaneous targets within the 2-degree field of view. HERMES has been commissioned over three runs, during bright time in October, November, and December 2013, in parallel with the beginning of the GALAH pilot survey, which started in November 2013. We present the first-light results from the commissioning run and the beginning of the GALAH survey, including performance results such as throughput and resolution, as well as instrument reliability.

Starbugs are miniature piezoelectric 'walking' robots with the ability to simultaneously position many optical fibres across a telescope's focal plane. Their simple design incorporates two piezoceramic tubes to form a pair of concentric 'legs' capable of taking individual steps of a few microns, yet with the capacity to move a payload several millimetres per second. The Australian Astronomical Observatory has developed this technology to enable fast and accurate field reconfigurations without the inherent limitations of more traditional positioning techniques, such as the 'pick and place' robotic arm. We report on our recent successes in demonstrating Starbug technology, driven principally by R&D efforts for the planned MANIFEST (many instrument fibre-system) facility for the Giant Magellan Telescope. Significant performance gains have resulted from improvements to the Starbug system, including i) the use of a vacuum to attach Starbugs to the underside of a transparent field plate, ii) optimisation of the control electronics, iii) a simplified mechanical design with high sensitivity piezo actuators, and iv) the construction of a dedicated laboratory 'test rig'. A method of reliably rotating Starbugs in steps of several arcminutes has also been devised, which integrates with the pre-existing x-y movement directions and offers greater flexibility while positioning. We present measured performance data from a prototype system of 10 Starbugs under full (closed-loop control), at field plate angles of 0-90 degrees.