The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission.

We present a data pipeline for the newly installed SST/CHROMIS imaging spectrometer, as well as for the older SST/CRISP spectropolarimeter. The aim is to provide observers with a user-friendly data pipeline, that delivers science-ready data with the metadata needed for archival. We generalized the CRISPRED data pipeline for multiple instruments and added metadata according to recommendations worked out as part of the SOLARNET project. We made improvements to several steps in the pipeline, including the MOMFBD image restoration. A part of that is a new fork of the MOMFBD program called REDUX, with several new features that are needed in the new pipeline. The CRISPEX data viewer has been updated to accommodate data cubes stored in this format. The pipeline code, as well as REDUX and CRISPEX are all freely available through git repositories or web download. We derive expressions for combining statistics of individual frames into statistics for a set of frames. We define a new extension to the World Coordinate System, that allow us to specify cavity errors as distortions to the spectral coordinate.

The most valuable asset of a space mission like Euclid are the data. Due to their huge volume, the automatic quality control becomes a crucial aspect over the entire lifetime of the experiment. Here we focus on the design strategy for the Science Ground Segment (SGS) Data Quality Common Tools (DQCT), which has the main role to provide software solutions to gather, evaluate, and record quality information about the raw and derived data products from a primarily scientific perspective. The SGS DQCT will provide a quantitative basis for evaluating the application of reduction and calibration reference data, as well as diagnostic tools for quality parameters, flags, trend analysis diagrams and any other metadata parameter produced by the pipeline. In a large programme like Euclid, it is prohibitively expensive to process large amount of data at the pixel level just for the purpose of quality evaluation. Thus, all measures of quality at the pixel level are implemented in the individual pipeline stages, and passed along as metadata in the production. In this sense most of the tasks related to science data quality are delegated to the pipeline stages, even though the responsibility for science data quality is managed at a higher level. The DQCT subsystem of the SGS is currently under development, but its path to full realization will likely be different than that of other subsystems. Primarily because, due to a high level of parallelism and to the wide pipeline processing redundancy, for instance the mechanism of double Science Data Center for each processing function, the data quality tools have not only to be widely spread over all pipeline segments and data levels, but also to minimize the occurrences of potential diversity of solutions implemented for similar functions, ensuring the maximum of coherency and standardization for quality evaluation and reporting in the SGS.

Bright EUV sunspot plumes have been observed in eight out of eleven different sunspot regions with the Coronal Diagnostic Spectrometer -- CDS on SOHO. From wavelength shifts we derive the line-of-sight velocity, relative to the average velocity in the rastered area, 120 arcsec x 120 arcsec. In sunspot plumes we find that the motion is directed away from the observer and increases with increasing line formation temperature, reaches a maximum between 15 and 41 km~s$^{-1}$ close to log T $\approx$ 5.5, then decreases abruptly. The flow field in the corona is not well correlated with the flow in the transition region and we discuss briefly the implication of this finding.

Bright EUV sunspot plumes have been observed in five out of nine sunspot regions with the Coronal Diagnostic Spectrometer -- CDS on SOHO. In the other four regions the brightest line emissions may appear inside the sunspot but are mainly concentrated in small regions outside the sunspot areas. These results are in contrast to those obtained during the Solar Maximum Mission, but are compatible with the Skylab mission results. The present observations show that sunspot plumes are formed in the upper part of the transition region, occur both in magnetic unipolar-- and bipolar regions, and may extend from the umbra into the penumbra.

In gravitational lens systems with 3 or more resolved images of a quasar, the intrinsic variability may be unambiguously separated from the microlensing variability through parallax measurements from 3 observers when there is no relative motion of the lens masses (Refsdal 1993). In systems with fewer than 3 resolved images, however, this separation is not straightforward. A general approach that may be used for this purpose is presented. For simplicity, only the one-dimensional case is considered in detail: Given a well-sampled time series of the observed flux at two points in space with a known separation, choosing a velocity $v_{\perp}$ of the observers perpendicular to the line of sight determines the microlensing magnification history, and thereby also the intrinsic variability. The velocity is chosen by minimizing some measure ($\chi^2$) of the residual intrinsic variability. In many cases this gives a close approximation to the true magnification. In cases where the relative motion of the lensing point masses is important, only a partial separation will be possible.

The contouring methods described by Lewis et al. (1993) and Witt (1993) are very efficient and elegant for obtaining the magnification of a point source moving along a straight track in the source plane. The method is, however, not very efficient for extended sources, because the amplification needs to be computed for numerous parallel tracks and then convolved with the source profile. Rayshooting is an efficient algorithm for relatively large sources, but the computing time increases with the inverse of the source area for a given noise level. This poster presents a hybrid method, using the contouring method in order to find only those parts of the lens area that contribute to the light curve through the rayshooting. Calculations show that this method has the potential to be $10$--$10^5$ times more efficient than crude rayshooting techniques.

It is demonstrated that the 1988-90 microlensing events in image A of Q2237+0305 reported by Racine (1992) do not exclude microlensing models with very low average mass, making the source radius larger than the projected Einstein radius $\eta_0$ (Refsdal and Stabell 1991, 1993). This is contrary to what has been claimed by Witt and Mao (1994). Since these events are the best resolved microlensing events recorded in Q2237+0305, further work should not exclude the possibility of a large source when interpreting lightcurve data.