The long gamma-ray burst GRB 161017A was detected by Fermi and Swift, and its afterglow was observed by the MITSuME 50-cm optical telescope promptly about 50 s after the burst. Early optical observations revealed that the optical lightcurve exhibits a plateau and rebrightening in the early afterglow phase about 500 and 5000 s after the trigger, respectively. By investigating the behavior of the spectral and temporal flux variation, it was found that the plateau and re-brightening cannot be explained in the context of the simple standard afterglow model. These observational features can be explained with two independent refreshed shocks, which indicate the long-acting central engine. We evaluated the physical parameters of the subsequent shells, and we then determined the kinetic energy ratio of the two colliding shells to the leading shell to be roughly 1 and 8, respectively. In addition, two prominent X-ray flares about 200 s after the trigger may be signatures of delayed ejections of the energetic jets responsible for the refreshed shocks. Such late activity of the central engine and X-ray flares play a crucial role in understanding the mechanisms for jet formation and photon emission.

Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel.

We report on the design and performance of a mixed-signal application specific integrated circuit (ASIC) dedicated to avalanche photodiodes (APDs) in order to detect hard X-ray emissions in a wide energy band onboard the International Space Station. To realize wide-band detection from 20 keV to 1 MeV, we use Ce:GAGG scintillators, each coupled to an APD, with low-noise front-end electronics capable of achieving a minimum energy detection threshold of 20 keV. The developed ASIC has the ability to read out 32-channel APD signals using 0.35 $\mu$m CMOS technology, and an analog amplifier at the input stage is designed to suppress the capacitive noise primarily arising from the large detector capacitance of the APDs. The ASIC achieves a performance of 2099 e$^{-}$ + 1.5 e$^{-}$/pF at root mean square (RMS) with a wide 300 fC dynamic range. Coupling a reverse-type APD with a Ce:GAGG scintillator, we obtain an energy resolution of 6.7% (FWHM) at 662 keV and a minimum detectable energy of 20 keV at room temperature (20 $^{\circ}$C). Furthermore, we examine the radiation tolerance for space applications by using a 90 MeV proton beam, confirming that the ASIC is free of single-event effects and can operate properly without serious degradation in analog and digital processing.