The Milky Way, like other disc galaxies, underwent violent mergers and accretion of smaller satellite galaxies in its early history. Thanks to $\mathit Gaia$-DR2 and spectroscopic surveys, the stellar remnants of such mergers have been identified. The chronological dating of such events is crucial to uncover the formation and evolution of the Galaxy at high redshift, but it has so far been challenging owing to difficulties in obtaining precise ages for these oldest stars. Here we combine asteroseismology -- the study of stellar oscillations -- with kinematics and chemical abundances, to estimate precise stellar ages ($\sim$ 11%) for a sample of stars observed by the $\mathit{Kepler}$ space mission. Crucially, this sample includes not only some of the oldest stars that were formed inside the Galaxy, but also stars formed externally and subsequently accreted onto the Milky Way. Leveraging this unprecedented temporal resolution in age, we provide overwhelming evidence in favour of models in which the Galaxy had already formed a significant population of its stars (which now reside mainly in its thick disc) before the in-fall of the satellite galaxy $\mathit{Gaia}$-$\mathit{Enceladus}$ 10 billions years ago.

Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data

Over the course of its history, the Milky Way has ingested multiple smaller satellite galaxies. While these accreted stellar populations can be forensically identified as kinematically distinct structures within the Galaxy, it is difficult in general to precisely date the age at which any one merger occurred. Recent results have revealed a population of stars that were accreted via the collision of a dwarf galaxy, called \textit{Gaia}-Enceladus, leading to a substantial pollution of the chemical and dynamical properties of the Milky Way. Here, we identify the very bright, naked-eye star $\nu$\,Indi as a probe of the age of the early in situ population of the Galaxy. We combine asteroseismic, spectroscopic, astrometric, and kinematic observations to show that this metal-poor, alpha-element-rich star was an indigenous member of the halo, and we measure its age to be $11.0 \pm 0.7$ (stat) $\pm 0.8$ (sys)$\,\rm Gyr$. The star bears hallmarks consistent with it having been kinematically heated by the \textit{Gaia}-Enceladus collision. Its age implies that the earliest the merger could have begun was 11.6 and 13.2 Gyr ago at 68 and 95% confidence, respectively. Input from computations based on hierarchical cosmological models tightens (i.e. reduces) slightly the above limits.

Support for early career astronomers who are just beginning to explore astronomy research is imperative to increase retention of diverse practitioners in the field. Since 2010, Astrobites has played an instrumental role in engaging members of the community -- particularly undergraduate and graduate students -- in research. In this white paper, the Astrobites collaboration outlines our multi-faceted online education platform that both eases the transition into astronomy research and promotes inclusive professional development opportunities. We additionally offer recommendations for how the astronomy community can reduce barriers to entry to astronomy research in the coming decade.

Asteroseismology provides fundamental stellar parameters independent of distance, but subject to systematics under calibration. Gaia DR2 has provided parallaxes for a billion stars, which are offset by a parallax zero-point. Red Clump (RC) stars have a narrow spread in luminosity, thus functioning as standard candles to calibrate these systematics. This work measures how the magnitude and spread of the RC in the Kepler field are affected by changes to temperature and scaling relations for seismology, and changes to the parallax zero-point for Gaia. We use a sample of 5576 RC stars classified through asteroseismology. We apply hierarchical Bayesian latent variable models, finding the population level properties of the RC with seismology, and use those as priors on Gaia parallaxes to find the parallax zero-point offset. We then find the position of the RC using published values for the zero-point. We find a seismic temperature insensitive spread of the RC of ~0.03 mag in the 2MASS K band and a larger and slightly temperature-dependent spread of ~0.13 mag in the Gaia G band. This intrinsic dispersion in the K band provides a distance precision of ~1% for RC stars. Using Gaia data alone, we find a mean zero-point of -41 $\pm$ 10 $\mu$as. This offset yields RC absolute magnitudes of -1.634 $\pm$ 0.018 in K and 0.546 $\pm$ 0.016 in G. Obtaining these same values through seismology would require a global temperature shift of ~-70 K, which is compatible with known systematics in spectroscopy.

We present the discovery of TOI-197.01, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. TOI-197 (HIP116158) is a bright (V=8.2 mag), spectroscopically classified subgiant which oscillates with an average frequency of about 430 muHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2-minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (2.943+/-0.064 Rsun), mass (1.212 +/- 0.074 Msun) and age (4.9+/-1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (9.17+/-0.33 Rearth) with an orbital period of ~14.3 days, irradiance of 343+/-24 Fearth, moderate mass (60.5 +/- 5.7 Mearth) and density (0.431+/-0.062 gcc). The properties of TOI-197.01 show that the host-star metallicity - planet mass correlation found in sub-Saturns (4-8 Rearth) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ~15%, TOI-197.01 is one of the best characterized Saturn-sized planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology.

The NASA's Transiting Exoplanet Survey Satellite (TESS) is about to provide full-frame images of almost the entire sky. The amount of stellar data to be analysed represents hundreds of millions stars, which is several orders of magnitude above the amount of stars observed by CoRoT, Kepler, or K2 missions. We aim at automatically classifying the newly observed stars, with near real-time algorithms, to better guide their subsequent detailed studies. In this paper, we present a classification algorithm built to recognise solar-like pulsators among classical pulsators, which relies on the global amount of power contained in the PSD, also known as the FliPer (Flicker in spectral Power density). As each type of pulsating star has a characteristic background or pulsation pattern, the shape of the PSD at different frequencies can be used to characterise the type of pulsating star. The FliPer Classifier (FliPer$_{Class}$) uses different FliPer parameters along with the effective temperature as input parameters to feed a machine learning algorithm in order to automatically classify the pulsating stars observed by TESS. Using noisy TESS simulated data from the TESS Asteroseismic Science Consortium (TASC), we manage to classify pulsators with a 98% accuracy. Among them, solar-like pulsating stars are recognised with a 99% accuracy, which is of great interest for further seismic analysis of these stars like our Sun. Similar results are obtained when training our classifier and applying it to 27 days subsets of real Kepler data. FliPer$_{Class}$ is part of the large TASC classification pipeline developed by the TESS Data for Asteroseismology (T'DA) classification working group.

The recently launched NASA Transiting Exoplanet Survey Satellite (TESS) mission is going to collect lightcurves for a few hundred million of stars and we expect to increase the number of pulsating stars to analyze compared to the few thousand stars observed by the CoRoT, $\textit{Kepler}$ and K2 missions. However, most of the TESS targets have not yet been properly classified and characterized. In order to improve the analysis of the TESS data, it is crucial to determine the type of stellar pulsations in a timely manner. We propose an automatic method to classify stars attending to their pulsation properties, in particular, to identify solar-like pulsators among all TESS targets. It relies on the use of the global amount of power contained in the power spectrum (already known as the FliPer method) as a key parameter, along with the effective temperature, to feed into a machine learning classifier. Our study, based on TESS simulated datasets, shows that we are able to classify pulsators with a $98\%$ accuracy.

Asteroseismology provides global stellar parameters such as masses, radii or surface gravities using the mean global seismic parameters as well as the effective temperature for thousands of low-mass stars $(0.8 M_\odot <M<3 M_\odot)$. This methodology has been successfully applied to stars in which acoustic modes excited by turbulent convection are measured. Other techniques such as the Flicker can also be used to determine stellar surface gravities, but only works for $\log{g}$ above $2.5$ dex. In this work, we present a new metric called FliPer (the acronym stands for Flicker in spectral power density, in opposition to the standard Flicker measurement which is computed in the time domain that is able to extend the range for which reliable surface gravities can be obtained ($0.1<\log{g}<4.6$ dex) without performing any seismic analysis for stars brighter than $\textit{Kp}$ $<$ 14. FliPer takes into account the average variability of a star measured in the power density spectrum in a given range of frequencies. However, FliPer values calculated on several ranges of frequency are required to better characterize a star. Using a large set of asteroseismic targets it is possible to calibrate the behavior of surface gravity with FliPer through machine learning. This calibration made with a random forest regressor covers a wide range of surface gravities from main-sequence stars to subgiants and red giants, with very small uncertainties from $0.04$ to $0.1$ dex. FliPer values can be inserted in automatic global seismic pipelines to either give an estimation of the stellar surface gravity or to assess the quality of the seismic results by detecting any outliers in the obtained $\nu_{max}$ values. FliPer also constrain the surface gravities of main-sequence dwarfs using only long cadence data for which the Nyquist frequency is too low to measure the acoustic-mode properties.

The red-giant branch bump provides valuable information for the investigation of the internal structure of low-mass stars. Because current models are unable to accurately predict the occurrence and efficiency of mixing processes beyond convective boundaries, one can use the luminosity of the bump --- a diagnostic of the maximum extension of the convective envelope during the first-dredge up --- as a calibrator for such processes. By combining asteroseismic and spectroscopic constraints, we expand the analysis of the bump to masses and metallicities beyond those previously accessible using globular clusters. Our dataset comprises nearly 3000 red-giant stars observed by {\it Kepler} and with APOGEE spectra. Using statistical mixture models, we are able to detect the bump in the average seismic parameters $\nu_{\rm max}$ and $\langle \Delta \nu \rangle$, and show that its observed position reveals general trends with mass and metallicity in line with expectations from models. Moreover, our analysis indicates that standard stellar models underestimate the depth of efficiently mixed envelopes. The inclusion of significant overshooting from the base of the convective envelope, with an efficiency that increases with decreasing metallicity, allows to reproduce the observed location of the bump. Interestingly, this trend was also reported in previous studies of globular clusters.

Recent results have suggested that there is tension between the Gaia DR1 TGAS distances and the distances obtained using luminosities determined by eclipsing binaries or asteroseismology on red giant stars. We use the $K_s$-band luminosities of red clump stars, identified and characterized by asteroseismology, to make independent distance estimates. Our results suggest that Gaia TGAS distances contain a systematic error that decreases with increasing distance. We propose a correction to mitigate this offset as a function of parallax that is valid for the Kepler field and values of parallax that are less than ${\sim} 1.6 \rm \, mas$. For parallaxes greater than this we find agreement with previously published values. We note that the TGAS distances to the red clump stars of the open cluster M67 show a high level of disagreement that is difficult to correct for.