Heat flow is an important constraint on planetary formation and evolution. It has been suggested that Martian obliquity cycles might cause periodic collapses in atmospheric pressure, leading to corresponding decreases in regolith thermal conductivity (which is controlled by gas in the pore spaces). Geothermal heat would then build up in the subsurface, potentially affecting present-day heat flow - and thus the measurements made by a heat-flow probe such as the InSight HP$^{3}$ instrument. To gauge the order of magnitude of this effect, we model the diffusion of a putative heat pulse caused by thermal conductivity changes with a simple numerical scheme and compare it to the heat-flow perturbations caused by other effects. We find that an atmospheric collapse to 300 Pa in the last 40 kyr would lead to a present-day heat flow that is up to $2-8\%$ larger than the average geothermal background. Considering the InSight mission with expected $5-15\%$ error bars on the HP$^{3}$ measurement, this perturbation would only be significant in the best-case scenario of full instrument deployment, completed measurement campaign, and a well-modelled surface configuration. The prospects for detecting long-term climate perturbations via spacecraft heat-flow experiments remain challenging.

Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.

We have designed and built a compact breadboard prototype instrument called WatSen: a combined ATR mid-IR spectrometer, fixed-focus microscope, and humidity sensor. The instrument package is enclosed in a rugged cylindrical casing only 26mm in diameter. The functionality, reliability and performance of the instrument was tested in an environment chamber set up to resemble martian surface conditions. The effective wavelength range of the spectrometer is 6.2 - 10.3 micron with a resolution delta-wavelength/wavelength = 0.015. This allows detection of silicates and carbonates, including an indication of the presence of water (ice). Spectra of clusters of grains < 1mm across were acquired that are comparable with spectra of the same material obtained using a commercial system. The microscope focuses through the diamond ATR crystal. Colour images of the grains being spectroscopically analysed are obtainable with a resolution of ~ 20 micron.