Normalized to: Hadjara, M.
[1]
oai:arXiv.org:1909.03997 [pdf] - 1957444
A CO-multilayer outer atmosphere for eight evolved stars revealed with
VLTI/AMBER
Submitted: 2019-09-09
We determine the physical parameters of the outer atmosphere of a sample of
eight evolved stars, including the red supergiant {\alpha} Scorpii, the red
giant branch stars {\alpha} Bootis and {\gamma} Crucis, the K giant {\lambda}
Velorum, the normal M giants BK Virginis and SW Virginis, and the Mira star W
Hydrae (in two different luminosity phases) by spatially resolving the stars in
the individual carbon monoxide (CO) first overtone lines. We used the
Astronomical Multi-BEam combineR (AMBER) instrument at the Very Large Telescope
Interferometer (VLTI), in high-resolution mode (${\lambda}/{\Delta}{\lambda}
{\approx} 12000$) between 2.28 and 2.31 ${\mu}m$ in the K band.The maximal
angular resolution is 10 mas, obtained using a triplet telescope configuration,
with baselines from 7 to 48 m. By using a numerical model of a molecular
atmosphere in a spherical shells (MOLsphere), called PAMPERO (an acronym for
the "Physical Approach of Molecular Photospheric Ejection at
high-angular-Resolution for evOlved stars"), we add multiple extended CO layers
above the photospheric MARCS model at an adequate spatial resolution. We use
the differential visibilities and the spectrum to estimate the size ($R$) of
the CO MOLsphere, its column density (${N_{CO}}$) and temperature (${T_{mol}}$)
distributions along the stellar radius. The combining of the ${\chi^2}$
minimization and a fine grid approach for uncertainty analysis leads to
reasonable ${N_{CO}}$ and ${T_{mol}}$ distributions along the stellar radius of
the MOLsphere.
[2]
oai:arXiv.org:1811.05989 [pdf] - 1799983
Spatially resolving the atmosphere of the non-Mira-type AGB star SW Vir
in near-infrared molecular and atomic lines with VLTI/AMBER
Submitted: 2018-11-14
We present a near-infrared spectro-interferometric observation of the
non-Mira-type, semiregular asymptotic giant branch star SW Vir. Our aim is to
probe the physical properties of the outer atmosphere with spatially resolved
data in individual molecular and atomic lines. We observed SW Vir in the
spectral window between 2.28 and 2.31 micron with the near-infrared
interferometric instrument AMBER at ESO's Very Large Telescope Interferometer
(VLTI). Thanks to AMBER's high spatial resolution and high spectral resolution
of 12000, the atmosphere of SW Vir has been spatially resolved not only in
strong CO first overtone lines but also in weak molecular and atomic lines of
H2O, CN, HF, Ti, Fe, Mg, and Ca. Comparison with the MARCS photospheric models
reveals that the star appears larger than predicted by the hydrostatic models
not only in the CO lines but also even in the weak molecular and atomic lines.
We found that this is primarily due to the H2O lines (but also possibly due to
the HF and Ti lines) originating in the extended outer atmosphere. Although the
H2O lines manifest themselves very little in the spatially unresolved spectrum,
the individual rovibrational H2O lines from the outer atmosphere can be
identified in the spectro-interferometric data. Our modeling suggests an H2O
column density of 10^{19}--10^{20} cm^{-2} in the outer atmosphere extending
out to ~2 Rstar. Our study has revealed that the effects of the nonphotospheric
outer atmosphere are present in the spectro-interferometric data not only in
the strong CO first overtone lines but also in the weak molecular and atomic
lines. Therefore, analyses of spatially unresolved spectra, such as for example
analyses of the chemical composition, should be carried out with care even if
the lines appear to be weak.
[3]
oai:arXiv.org:1808.01399 [pdf] - 1728077
Differential interferometry of the rapid rotator Regulus
Submitted: 2018-08-03
We analyse interferometric data obtained for Regulus with AMBER (Astronomical
Multi- BEam combineR) at high spectral resolution ($\lambda/\delta\lambda
\approx 12000$) across the Br$\gamma$ spectral line. The study of the
photocentre displacement allows us to constrain a large number of stellar
parameters -- equatorial radius $R_{\rm eq}$, equatorial velocity $V_{\rm eq}$,
inclination $i$, rotation-axis position angle $PA_{\rm rot}$, and flattening --
with an estimation of gravity-darkening coefficient $\beta$ using previously
published theoretical results. We use the Simulation Code of
Interferometric-observations for ROtators and CirCumstellar Objects (SCIROCCO),
a semi-analytical algorithm dedicated to fast rotators. We chose Regulus
because it is a very well-known edge-on star, for which an alternative approach
is needed to check the previously published results. Our analysis showed that a
significant degeneracy of solution is present. By confronting the results
obtained by differential interferometry with those obtained by conventional
long-base interferometry, we obtain similar results (within the uncertainties),
thereby validating our approach, where $V_{eq}$ and $i$ are found separately.
From the photocentre displacement, we can independently deduce $PA_{rot}$. We
use two minimization methods to restrict observed stellar parameters via a fast
rotator model: a non-stochastic method ($\chi^2$ fit) and a stochastic one
(Markov Chain Monte Carlo method), in order to check whether the correct global
minimum is achieved particularly with respect to the degeneracies of the
gravity darkening parameter $\beta$, where we demonstrate, using a quantitative
analysis of parameters, that the estimate of $\beta$ is easier for stars with
an inclination angle of around $45^\circ$.
[4]
oai:arXiv.org:1712.03584 [pdf] - 1601831
Regulus observed with VLTI/AMBER
Submitted: 2017-12-10
The rapidly rotating primary component of Regulus A system has been observed,
for the first time, using the technique of differential interferometry at high
spectral resolution. The observations have been performed across the
Br$_\gamma$ spectral line with the VLTI/AMBER focal instrument in high spectral
resolution mode (R $\approx$ 12000) at $\approx$ 80-130m (projected on the sky)
Auxiliary Telescopes triplet baseline configurations. We confirm, within the
uncertainties, the results previously obtained using the techniques of
classical long-baseline interferometry, although the question of anomalous
gravity darkening remains open for the future study.
[5]
oai:arXiv.org:1709.07334 [pdf] - 1588678
Observations et mod\'elisations spectro-interf\'erom\'etriques longue
base des \'etoiles et de leur environnement proche
Submitted: 2017-09-21
With the construction of the VLTI (Very Large Telescope Interferometer of the
European Observatory ESO for the southern hemisphere) it is now possible to
make observations with resolutions of the order of milli-arc-seconds,
especially in IR with AMBER instrument (Astronomical Multi Beam Recombine).
These new capabilities allow us to better constrain the stellar structures such
as polar jets, equatorial disks and flattened photospheres of rotating stars.
Thus the estimation of stellar fundamental parameters allows to explore in
detail the mechanisms of mass loss, pulsation and magnetism governing the
variability and the evolution of the stars.
This thesis presents the results of fast rotating stars observations carried
out on the AMBER spectro-interferometer VLTI in its high \& medium spectral
resolutions modes. The observations were highly degraded by the optical defects
of AMBER and their analysis required the development of specific digital
reduction tools to reach the necessary precision for the interferometric
measurements interpretation. In order to interpret those measures I developed a
chromatic semi-analytical model of rapidly rotating star that allowed me to
estimate, from the differential phases; the degree of flattening, the
equatorial radius, the rotation velocity, the angle of inclination, the
position angle of the star rotation axis in the sky, the local distribution of
the effective temperature and the surface gravity of the star within the von
Zeipel theorem. The results for four massive stars of spectral types B, A and F
have allowed me to characterize the mechanisms discussed above and thus open
some prospect for more systematic studies of similar objects, with extending
later these studies to the relationship photosphere - circumstellar envelope.
[6]
oai:arXiv.org:1709.07074 [pdf] - 1588645
Etude et mise en oeuvre des techniques Temps-Distance en Heliosismologie
Submitted: 2017-09-20
In the same way that seismologists study the interior of the earth from the
waves generated by earthquakes, heliosismology is the science that is
interested in the study of oscillatory waves inside the Sun. Temperature,
chemical composition, rotational velocities at different depths are all factors
that influence the oscillation frequencies of the waves trapped inside the Sun.
The observation and measurement of the frequencies (or velocities) of
oscillations of the principal modes on the surface of the Sun allow us to study
the internal properties of the star. In our study, we use a local helioseismic
method, called "Time-Distance"; the latter, after appropriate treatment
(remapping, tracking, and filtering) of the data, which carried out from the
GONG (Global Oscillation Network Group) observation network, allows us to
deduce, by correlation of the observed signals, the relationship between the
time of the wave path and its crossed distance (hence the name of the method)
between different points on the surface as a function of the different solar
sub-surface parameters, via the dispersion relation. Once the travel times have
been established by approximation of the correlation function by a Gaussian
wave packet and based on the Fermat principle dealing with acoustic waves, we
find the relationship between these times and the internal parameters of the
crossed medium. Two models are considered in this study. The first does not
include the effects of the magnetic field and takes into account the flow
velocity and the sound speed. The second, on the other hand, includes the
magnetic effects, by means of the Alfven velocity (magnetic field perturbation
velocity), in addition to the parameters mentioned above. The last part of this
paper was devoted to the inversion of the obtained times, which allows us to go
back to the solar internal parameters.
[7]
oai:arXiv.org:1709.06993 [pdf] - 1588619
The PICARD Payload Data Centre
Pradels, G.;
Guinle, T.;
Thuillier, G.;
Irbah, A.;
Marcovici, J-P.;
Dufour, C.;
Moreau, D.;
Noel, C.;
Dominique, M.;
Corbard, T.;
Hadjara, M.;
Mekaoui, S.;
Wehrli, C.
Submitted: 2017-09-19
PICARD is a scientific space mission dedicated to the study of the solar
variability origin. A French micro-satellite will carry an imaging telescope
for measuring the solar diameter, limb shape and solar oscillations, and two
radiometers for measuring the total solar irradiance and the irradiance in five
spectral domains, from ultraviolet to infrared. The mission is planed to be
launched in 2009 for a 3-year duration. This article presents the PICARD
Payload Data Centre, which role is to collect, process and distribute the
PICARD data. The Payload Data Centre is a joint project between laboratories,
space agency and industries. The Belgian scientific policy office funds the
industrial development and future operations under the European Space Agency
program. The development is achieved by the SPACEBEL Company. The Belgian
operation centre is in charge of operating the PICARD Payload Data Centre. The
French space agency leads the development in partnership with the French
scientific research centre, which is responsible for providing all the
scientific algorithms. The architecture of the PICARD Payload Data Centre
(software and hardware) is presented. The software system is based on a Service
Oriented Architecture. The host structure is made up of the basic functions
such as data management, task scheduling and system supervision including a
graphical interface used by the operator to interact with the system. The other
functions are mission-specific: data exchange (acquisition, distribution), data
processing (scientific and non-scientific processing) and managing the payload
(programming, monitoring). The PICARD Payload Data Centre is planned to be
operated for 5 years. All the data will be stored into a specific data centre
after this period.