The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission.

We present the scientific case for a future space-based telescope aimed at very high spatial and temporal resolution imaging of the solar photosphere and chromosphere. Previous missions (e.g., HINODE, SUNRISE) have demonstrated the power of observing the solar photosphere and chromosphere at high spatial resolution without contamination from Earth's atmosphere. We argue here that increased spatial resolution (from currently 70 km to 25 km in the future) and high temporal cadence of the observations will vastly improve our understanding of the physical processes controlling solar magnetism and its characteristic scales. This is particularly important as the Sun's magnetic field drives solar activity and can significantly influence the Sun-Earth system. At the same time a better knowledge of solar magnetism can greatly improve our understanding of other astrophysical objects.

In this brief communication we provide the rationale for, and the outcome of the International Astronomical Union (IAU) resolution vote at the XXIX-th General Assembly in Honolulu, Hawaii, in 2015, on recommended nominal conversion constants for selected solar and planetary properties. The problem addressed by the resolution is a lack of established conversion constants between solar and planetary values and SI units: a missing standard has caused a proliferation of solar values (e.g., solar radius, solar irradiance, solar luminosity, solar effective temperature and solar mass parameter) in the literature, with cited solar values typically based on best estimates at the time of paper writing. As precision of observations increases, a set of consistent values becomes increasingly important. To address this, an IAU Working Group on Nominal Units for Stellar and Planetary Astronomy formed in 2011, uniting experts from the solar, stellar, planetary, exoplanetary and fundamental astronomy, as well as from general standards fields to converge on optimal values for nominal conversion constants. The effort resulted in the IAU 2015 Resolution B3, passed at the IAU General Assembly by a large majority. The resolution recommends the use of nominal solar and planetary values, which are by definition exact and are expressed in SI units. These nominal values should be understood as conversion factors only, not as the true solar/planetary properties or current best estimates. Authors and journal editors are urged to join in using the standard values set forth by this resolution in future work and publications to help minimize further confusion.

The XXIXth IAU General Assembly in Honolulu adopted IAU 2015 Resolution B2 on recommended zero points for the absolute and apparent bolometric magnitude scales. The resolution was proposed by the IAU Inter-Division A-G Working Group on Nominal Units for Stellar and Planetary Astronomy after consulting with a broad spectrum of researchers from the astronomical community. Resolution B2 resolves the long-standing absence of an internationally-adopted zero point for the absolute and apparent bolometric magnitude scales. Resolution B2 defines the zero point of the absolute bolometric magnitude scale such that a radiation source with $M_{\rm Bol}$ = 0 has luminosity L$_{\circ}$ = 3.0128e28 W. The zero point of the apparent bolometric magnitude scale ($m_{\rm Bol}$ = 0) corresponds to irradiance $f_{\circ}$ = 2.518021002e-8 W/m$^2$. The zero points were chosen so that the nominal solar luminosity (3.828e26 W) adopted by IAU 2015 Resolution B3 corresponds approximately to $M_{\rm Bol}$(Sun) = 4.74, the value most commonly adopted in recent literature. The nominal total solar irradiance (1361 W/m$^2$) adopted in IAU 2015 Resolution B3 corresponds approximately to apparent bolometric magnitude $m_{\rm bol}$(Sun) = -26.832. Implicit in the IAU 2015 Resolution B2 definition of the apparent bolometric magnitude scale is an exact definition for the parsec (648000/$\pi$ au) based on the IAU 2012 Resolution B2 definition of the astronomical unit.

Astronomers commonly quote the properties of celestial objects in units of parameters for the Sun, Jupiter, or the Earth. The resolution presented here was proposed by the IAU Inter-Division Working Group on Nominal Units for Stellar and Planetary Astronomy and passed by the XXIXth IAU General Assembly in Honolulu. IAU 2015 Resolution B3 adopts a set of nominal solar, terrestrial, and jovian conversion constants for stellar and (exo)planetary astronomy which are defined to be exact SI values. While the nominal constants are based on current best estimates (CBEs; which have uncertainties, are not secularly constant, and are updated regularly using new observations), they should be interpreted as standard values and not as CBEs. IAU 2015 Resolution B3 adopts five solar conversion constants (nominal solar radius, nominal total solar irradiance, nominal solar luminosity, nominal solar effective temperature, and nominal solar mass parameter) and six planetary conversion constants (nominal terrestrial equatorial radius, nominal terrestrial polar radius, nominal jovian equatorial radius, nominal jovian polar radius, nominal terrestrial mass parameter, and nominal jovian mass parameter).

The variation of solar irradiance is one of the natural forcing mechanisms of the terrestrial climate. Hence, the time-dependent solar irradiance is an important input parameter for climate modelling. The solar surface magnetic field is a powerful proxy for solar irradiance reconstruction. The analyses of data obtained with the Michelson Doppler Imager (MDI) on board the SOHO mission are therefore useful for the identification of solar surface magnetic features to be used in solar irradiance reconstruction models. However, there is still a need for automated technologies that would enable the identification of solar activity features from large databases. To achieve this we present a series of enhanced segmentation algorithms developed to detect and calculate the area coverages of specific magnetic features from MDI intensitygrams and magnetograms. These algorithms are part of the Automated Solar Activity Prediction (ASAP) tool. The segmentation algorithms allow us to identify the areas on the solar disk covered by magnetic elements inside and outside boundaries of active regions. Depending on their contrast properties, magnetic features within an active region boundary are classified as sunspot umbra and penumbra, or faculae. Outside an active region boundary magnetic elements are identified as network. We present the detailed steps involved in the segmentation process and provide the area coverages of the segmented MDI intensitygrams and magnetograms. The feature segmentation has been carried out on daily intensitygrams and magnetograms from April 21, 1996 to April 11, 2011. This offers an exciting opportunity to undertake further investigations that benefit from solar features segmentations, such as solar irradiance reconstruction, which we plan to investigate in the future.

We present preliminary reconstructions of the EUV from 26 to 34\,nm from February 1997 to May 2005, covering most of solar cycle 23. The reconstruction is based on synthetic EUV spectra calculated with the spectral synthesis code Solar Modeling in 3D (SolMod3D). These spectra are weighted by the relative area coverage of the coronal features as identified from EIT images. The calculations are based on one-dimensional atmospheric structures that represent a temporal and spatial mean of the chromosphere, transition region, and corona. The employed segmentation analysis considers coronal holes, the quiet corona, and active regions identified on the solar disk. The reconstructed EUV irradiance shows a good agreement with observations taken with the CELIAS/SEM instrument onboard SOHO. Further improvement of the reconstruction including more solar features as well as the off-limb detection of activity features will be addressed in the near future.

We present spectral synthesis calculations of the solar extreme UV (EUV) in spherical symmetry carried out with the 'Solar Modeling in 3D' code. The calculations are based on one-dimensional atmospheric structures that represent a temporal and spatial mean of the chromosphere, transition region, and corona. The synthetic irradiance spectra are compared with the recent calibration spectrum taken with the EUV Variability Experiment during the Whole Heliospheric Interval. The good agreement between the synthetic and observed quiet Sun spectrum shows that the employed atmospheric structures are suitable for irradiance calculations. The validation of the quiet Sun spectrum for the present solar minimum is the first step towards the modeling of the EUV variations.

The variable Sun is the most likely candidate for natural forcing of past climate change on time scales of 50 to 1000 years. Evidence for this understanding is that the terrestrial climate correlates positively with solar activity. During the past 10,000 years, the Sun has experienced substantial variations in activity and there have been numerous attempts to reconstruct solar irradiance. While there is general agreement on how solar forcing varied during the last several hundred years --- all reconstructions are proportional to the solar activity --- there is scientific controversy on the magnitude of solar forcing. We present a reconstruction of the Total and Spectral Solar Irradiance covering 130 nm--10 $\mu$m from 1610 to the present with annual resolution and for the Holocene with 22-year resolution. We assume that the minimum state of the quiet Sun in time corresponds to the observed quietest area on the present Sun. Then we use available long-term proxies of the solar activity, which are $^{10}$Be isotope concentrations in ice cores and 22-year smoothed neutron monitor data, to interpolate between the present quiet Sun and the minimum state of the quiet Sun. This determines the long-term trend in the solar variability which is then superposed with the 11-year activity cycle calculated from the sunspot number. The time-dependent solar spectral irradiance from about 7000 BC to the present is then derived using a state-of-the-art radiation code. We derive a total and spectral solar irradiance that was substantially lower during the Maunder minimum than observed today. The difference is remarkably larger than other estimations published in the recent literature. The magnitude of the solar UV variability, which indirectly affects climate is also found to exceed previous estimates. We discuss in details the assumptions which leaded us to this conclusion.

Context. The solar irradiance is known to change on time scales of minutes to decades, and it is suspected that its substantial fluctua- tions are partially responsible for climate variations. Aims. We are developing a solar atmosphere code that allows the physical modeling of the entire solar spectrum composed of quiet Sun and active regions. This code is a tool for modeling the variability of the solar irradiance and understanding its influence on Earth. Methods. We exploit further development of the radiative transfer code COSI that now incorporates the calculation of molecular lines. We validated COSI under the conditions of local thermodynamic equilibrium (LTE) against the synthetic spectra calculated with the ATLAS code. The synthetic solar spectra were also calculated in non-local thermodynamic equilibrium (NLTE) and compared to the available measured spectra. In doing so we have defined the main problems of the modeling, e.g., the lack of opacity in the UV part of the spectrum and the inconsistency in the calculations of the visible continuum level, and we describe a solution to these problems. Results. The improved version of COSI allows us to reach good agreement between the calculated and observed solar spectra as measured by SOLSTICE and SIM onboard the SORCE satellite and ATLAS 3 mission operated from the Space Shuttle. We find that NLTE effects are very important for the modeling of the solar spectrum even in the visual part of the spectrum and for its variability over the entire solar spectrum. In addition to the strong effect on the UV part of the spectrum, NLTE effects influence the concentration of the negative ion of hydrogen, which results in a significant change of the visible continuum level and the irradiance variability.

From the analysis of Dopplergrams in the K I 7699 A and Na I 5890 A spectral lines observed with the Magneto-Optical filter at Two Heights (MOTH) experiment during the austral summer in 2002-03 we find upward traveling waves in magnetic regions. Our analysis shows that the dispersion relation of these waves strongly depends on whether the wave is detected in the low-beta or high-beta regime. Moreover, the observed dispersion relation does not show the expected decrease of the acoustic cut-off frequency for the field guided slow magnetic wave. Instead, we detected an increase of the travel times below the acoustic cut-off frequency and at the same time a decrease of the travel time above it. To study the formation height of the spectral lines employed by MOTH in greater detail we are currently in the process of employing 3D MHD simulations carried out with CO5BOLD to perform NLTE spectral synthesis.

Observations carried out with the Magneto-Optical Filter at Two Heights (MOTH) experiment show upward-traveling wave packets in magnetic regions with frequencies below the acoustic cut-off. We demonstrate that the frequency dependence of the observed travel times, i.e. the dispersion relation shows significant differences in magnetic and non-magnetic regions. More importantly, at and above the layer where the Alfven speed equals the sound speed we do not see the dispersion relation of the slow acoustic mode with a lowered cut-off frequency. Our comparisons with theoretical dispersion relations do not suggest this is the slow acoustic wave type for the upward low-frequency wave. From this we speculate that partial mode conversion from the fast acoustic to the fast magnetic wave might take place.

The total and spectral irradiance varies over short time scales, i.e. from days to months, and longer time scales from years to decades, centuries, and beyond. In this talk we review the current understanding of irradiance changes from days to decades. We present the current status of observations and discuss proposed reconstruction approaches to understand these variations. The main question that ultimately needs to be answered is what are the physical processes that could explain the enhanced heating of the photosphere, chromosphere, transition region, and corona, leading to a change in the solar radiative output at various wavelengths. As semi-empirical models allow us to reproduce the solar spectrum over a broad wavelength range, they offer a powerful tool to determine the energy necessary to heat certain layers and at the same time balance the radiative losses.

We present work in progress concerning spectral synthesis calculations of the solar UV/EUV in spherical symmetry carried out with the Solar Radiation Physical Modeling (SRPM) project. We compare the synthetic irradiance spectrum for the quiet Sun with the recent solar minimum spectrum taken with the EVE rocket instrument. The good agreement of the synthetic spectrum with the observation shows that the employed atmosphere structures are suitable for irradiance calculations.

Modeling the variability of the solar spectral irradiance is a key factor for understanding the solar influence on the climate of the Earth. As a first step to calculating the solar spectral irradiance variations we reproduce the solar spectrum for the quiet Sun over a broad wavelength range with an emphasis on the UV. We introduce the radiative transfer code COSI which calculates solar synthetic spectra under conditions of non-local thermodynamic equilibrium (NLTE). A self-consistent simultaneous solution of the radiative transfer and the statistical equation for the level populations guarantees that the correct physics is considered for wavelength regions where the assumption of local thermodynamic equilibrium (LTE) breaks down. The new concept of iterated opacity distribution functions (NLTE-ODFs), through which all line opacities are included in the NLTE radiative transfer calculation, is presented. We show that it is essential to include the line opacities in the radiative transfer to reproduce the solar spectrum in the UV. Through the implemented scheme of NLTE-ODFs the COSI code is successful in reproducing the spectral energy distribution of the quiet Sun.

Two methods are used to observationally determine the solar radius: One is the observation of the intensity profile at the limb, the other one uses f-mode frequencies to derive a 'seismic' solar radius which is then corrected to optical depth unity. The two methods are inconsistent and lead to a difference in the solar radius of $\sim$0.3 Mm. Because of the geometrical extention of the solar photosphere and the increased path lengths of tangential rays the Sun appears to be larger to an observer who measures the extent of the solar disk. Based on radiative transfer calculations we show that this discrepancy can be explained by the difference between the height at disk center where $\tau_{\mathrm{5000}}=1$ ($\tau_{\mathrm{Ross}}=2/3$) and the inflection point of the intensity profile on the limb. We calculate the intensity profile of the limb for the MDI continuum and the continuum at 5000 {\AA} for two atmosphere structures and compare the position of the inflection points with the radius at $\tau_{\mathrm{5000}}=1$ ($\tau_{\mathrm{Ross}}=2/3$). The calculated difference between the 'seismic' radius and the inflection point is $0.347\pm 0.06$ Mm with respect to $\tau_{\mathrm{5000}}=1$ and $0.333\pm 0.08$ Mm with respect to $\tau_{\mathrm{Ross}}=2/3$. We conclude that the standard solar radius in evolutionary models has to be lowered by $0.333\pm 0.08$ Mm and is 695.66 Mm. Furthermore, this correction reconciles inflection point measurements and the 'seismic' radii within the uncertainty.