Digital correlated double sampling (DCDS), a readout technique for charge-coupled devices (CCD), is gaining popularity in astronomical applications. By using an oversampling ADC and a digital filter, a DCDS system can achieve a better performance than traditional analogue readout techniques at the expense of a more complex system analysis. Several attempts to analyse and optimize a DCDS system have been reported, but most of the work presented in the literature has been experimental. Some approximate analytical tools have been presented for independent parameters of the system, but the overall performance and trade-offs have not been yet modelled. Furthermore, there is disagreement among experimental results that cannot be explained by the analytical tools available. In this work, a theoretical analysis of a generic DCDS readout system is presented, including key aspects such as the signal conditioning stage, the ADC resolution, the sampling frequency and the digital filter implementation. By using a time-domain noise model, the effect of the digital filter is properly modelled as a discrete-time process, thus avoiding the imprecision of continuous-time approximations that have been used so far. As a result, an accurate, closed-form expression for the signal-to-noise ratio at the output of the readout system is reached. This expression can be easily optimized in order to meet a set of specifications for a given CCD, thus providing a systematic design methodology for an optimal readout system. Simulated results are presented to validate the theory, obtained with both time- and frequency-domain noise generation models for completeness.

The Digital Correlated Double Sampling (DCDS) is a technique based on multiple analog-to-digital conversions of every pixel when reading a CCD out. This technique allows to remove analog integrators, simplifying the readout electronics circuitry. In this work, a theoretical framework that computes the optimal weighted coefficients of the pixels samples, which minimize the readout noise measured at the CCD output is presented. By using a noise model for the CCD output amplifier where white and flicker noise are treated separately, the mathematical tool presented allows for the computation of the optimal samples coefficients in a deterministic fashion. By modifying the noise profile, our simulation results get in agreement and thus explain results that were in mutual disagreement up until now.

We present recent results from the initial testing of an Artificial Neural Network (ANN) based tomographic reconstructor Complex Atmospheric Reconstructor based on Machine lEarNing (CARMEN) on Canary, an Adaptive Optics demonstrator operated on the 4.2m William Herschel Telescope, La Palma. The reconstructor was compared with contemporaneous data using the Learn and Apply (L&A) tomographic reconstructor. We find that the fully optimised L&A tomographic reconstructor outperforms CARMEN by approximately 5% in Strehl ratio or 15nm rms in wavefront error. We also present results for Canary in Ground Layer Adaptive Optics mode to show that the reconstructors are tomographic. The results are comparable and this small deficit is attributed to limitations in the training data used to build the ANN. Laboratory bench tests show that the ANN can out perform L&A under certain conditions, e.g. if the higher layer of a model two layer atmosphere was to change in altitude by ~300~m (equivalent to a shift of approximately one tenth of a subaperture).

The availability and performance of laser-based adaptive optics (AO) systems are strongly dependent on the power and quality of the laser beam before being projected to the sky. Frequent and time-consuming alignment procedures are usually required in the laser systems with free-space optics to optimize the beam. Despite these procedures, significant distortions of the laser beam have been observed during the first two years of operation of the Gemini South multi-conjugate adaptive optics system (GeMS). A beam shaping concept with two deformable mirrors is investigated in order to provide automated optimization of the laser quality for astronomical AO. This study aims at demonstrating the correction of quasi-static aberrations of the laser, in both amplitude and phase, testing a prototype of this two-deformable mirror concept on GeMS. The paper presents the results of the preparatory study before the experimental phase. An algorithm to control amplitude and phase correction, based on phase retrieval techniques, is presented with a novel unwrapping method. Its performance is assessed via numerical simulations, using aberrations measured at GeMS as reference. The results predict effective amplitude and phase correction of the laser distortions with about 120 actuators per mirror and a separation of 1.4 m between the mirrors. The spot size is estimated to be reduced by up to 15% thanks to the correction. In terms of AO noise level, this has the same benefit as increasing the photon flux by 40%.

The use of Adaptive Optics in Extremely Large Telescopes brings new challenges, one of which is the treatment of Shack-Hartmann Wavefront sensors images. When using this type of sensors in conjunction with laser guide stars for sampling the pupil of telescopes with 30+ m in diameter, it is necessary to compute the centroid of elongated spots, whose elongation angle and aspect ratio are changing across the telescope pupil. Existing techniques such as Matched Filter have been considered as the best technique to compute the centroid of elongated spots, however they are not good at coping with the effect of a variation in the Sodium profile. In this work we propose a new technique using artificial neural networks, which take advantage of the neural network's ability to cope with changing conditions, outperforming existing techniques in this context. We have developed comprehensive simulations to explore this technique and compare it with existing algorithms.

Symbiotic stars are long-orbital-period interacting-binaries characterized by extended emission over the whole electromagnetic range and by complex photometric and spectroscopic variability. In this paper, the first of a series, we present OGLE light curves of all the confirmed symbiotic stars in the Large Magellanic Cloud, with one exception. By careful visual inspection and combined time-series analysis techniques, we investigate for the first time in a systematic way the photometric properties of these astrophysical objects, trying in particular to distinguish the nature of the cool component (e.g., Semi-Regular Variable vs. OGLE Small-Amplitude Red Giant), to provide its first-order pulsational ephemerides, and to link all this information with the physical parameters of the binary system as a whole. Among the most interesting results, there is the discovery of a 20-year-long steady fading of Sanduleak's star, a peculiar symbiotic star known to produce the largest stellar jet ever discovered. We discuss by means of direct examples the crucial need for long-term multi-band observations to get a real understanding of symbiotic and other interacting binary stars. We eventually introduce BOMBOLO, a multi-band simultaneous imager for the SOAR 4m Telescope, whose design and construction we are currently leading.

This paper describes the data preprocessing and reduction methods together with SLODAR analysis and wind profiling techniques for GeMS: the Gemini MCAO System. The wavefront gradient measurements of the five GeMS's Shack-Hartmann sensors, each one pointing to a laser guide star, are combined with the DM commands sent to three deformable mirrors optically conjugated at 0, 4.5 and 9 km in order to reconstruct pseudo-open loop slopes. These pseudo-open loop slopes are then used to reconstruct atmospheric turbulence profiles, based on the SLODAR and wind-profiling methods. We introduce the SLODAR method, and how it has been adapted to work in a close-loop, multi Laser Guide Star system. We show that our method allows characterizing the turbulence of up to 16 layers for altitudes spanning from 0 to 19 km. The data preprocessing and reduction methods are described, and results obtained from observations made in 2011 are presented. The wind profiling analysis is shown to be a powerful technique not only for characterizing the turbulence intensity, wind direction and speed, but also as it can provide a verification tool for SLODAR results. Finally, problems such as fratricide effect in multiple laser system due to Rayleigh scattering, centroid gain variations, and limitations of the method are also addressed.

Modern adaptive optics (AO) systems for large telescopes require tomographic techniques to reconstruct the phase aberrations induced by the turbulent atmosphere along a line of sight to a target which is angularly separated from the guide sources that are used to sample the atmosphere. Multi-object adaptive optics (MOAO) is one such technique. Here, we present a method which uses an artificial neural network (ANN) to reconstruct the target phase given off-axis references sources. We compare our ANN method with a standard least squares type matrix multiplication method and to the learn and apply method developed for the CANARY MOAO instrument. The ANN is trained with a large range of possible turbulent layer positions and therefore does not require any input of the optical turbulence profile. It is therefore less susceptible to changing conditions than some existing methods. We also exploit the non-linear response of the ANN to make it more robust to noisy centroid measurements than other linear techniques.