The project DRESDYN (DREsden Sodium facility for DYNamo and thermohydraulic studies) conducted at Helmholtz-Zentrum Dresden-Rossendorf (HZDR) provides a new platform for a variety of liquid sodium experiments devoted to problems of geo- and astrophysical magnetohydrodynamics. The most ambitious experiment within this project is a precession driven dynamo experiment that currently is under construction. It consists of a cylinder filled with liquid sodium that simultaneously rotates around two axes. The experiment is motivated by the idea of a precession-driven flow as a complementary energy source for the geodynamo or the ancient lunar dynamo. In the present study we address numerical and experimental examinations in order to identify parameter regions where the onset of magnetic field excitation will be most probable. Both approaches show that in the strongly nonlinear regime the flow is essentially composed of the directly forced primary Kelvin mode and higher modes in terms of standing inertial waves that arise from nonlinear self-interactions. A peculiarity is the resonance-like emergence of an axisymmetric mode that represents a double roll structure in the meridional plane, which, however, only occurs in a very limited range of the precession ratio. This axisymmetric mode turns out to be beneficial for dynamo action, and kinematic simulations of the magnetic field evolution induced by the time-averaged flow exhibit magnetic field excitation at critical magnetic Reynolds numbers around ${\rm{Rm}}^{\rm{c}}\approx 430$, which is well within the range of the planned liquid sodium experiment.

We have conducted experimental measurements and numerical simulations of a precession driven flow in a cylindrical cavity. The study is dedicated to the precession dynamo experiment currently under construction at Helmholtz-Zentrum Dresden-Rossendorf (HZDR) and aims at the evaluation of the hydrodynamic flow with respect to its ability to drive a dynamo. We focus on the strongly nonlinear regime in which the flow is essentially composed of the directly forced primary Kelvin mode and higher modes in terms of standing inertial waves arising from nonlinear self-interactions. We obtain an excellent agreement between experiment and simulation with regard to both, flow amplitudes and flow geometry. A peculiarity is the resonance-like emergence of an axisymmetric mode that represents a double roll structure in the meridional plane. Kinematic simulations of the magnetic field evolution induced by the time-averaged flow yield dynamo action at critical magnetic Reynolds numbers around ${\rm{Rm}}^{\rm{c}}\approx 430$ which is well within the range of the planned liquid sodium experiment.

We present results from three-dimensional non-linear hydrodynamic simulations of a precession driven flow in cylindrical geometry. The simulations are motivated by a dynamo experiment currently under development at Helmholtz-Zentrum Dresden-Rossendorf (HZDR) in which the possibility of generating a magnetohydrodynamic dynamo will be investigated in a cylinder filled with liquid sodium and simultaneously rotating around two axes. In this study, we focus on the emergence of non-axisymmetric time-dependent flow structures in terms of inertial waves which - in cylindrical geometry - form so-called Kelvin modes. For a precession ratio ${\rm{Po}}=\Omega_p/\Omega_c=0.014$ the amplitude of the forced Kelvin mode reaches up to one fourth of the rotation velocity of the cylindrical container confirming that precession provides a rather efficient flow driving mechanism even at moderate values of ${\rm{Po}}$. More relevant for dynamo action might be free Kelvin modes with higher azimuthal wave number. These free Kelvin modes are triggered by non-linear interactions and may constitute a triadic resonance with the fundamental forced mode when the height of the container matches their axial wave lengths. Our simulations reveal triadic resonances at aspect ratios close to those predicted by the linear theory except around the primary resonance of the forced mode. In that regime we still identify various free Kelvin modes, however, all of them exhibit a retrograde drift around the symmetry axis of the cylinder and none of them can be assigned to a triadic resonance. The amplitudes of the free Kelvin modes always remain below the forced mode but may reach up to 6% of the of the container's angular velocity. The properties of the free Kelvin modes will be used in future simulations of the magnetic induction equation to investigate their ability to provide for dynamo action.

The next generation dynamo experiment currently under development at Helmholtz-Zentrum Dresden-Rossendorf (HZDR) will consist of a precessing cylindrical container filled with liquid sodium. We perform numerical simulations of kinematic dynamo action applying a velocity field that is obtained from hydrodynamic models of a precession driven flow. So far, the resulting magnetic field growth-rates remain below the dynamo threshold for magnetic Reynolds numbers up to Rm=2000.

The azimuthal version of the magnetorotational instability (MRI) is a non-axisymmetric instability of a hydrodynamically stable differentially rotating flow under the influence of a purely or predominantly azimuthal magnetic field. It may be of considerable importance for destabilizing accretion disks, and plays a central role in the concept of the MRI dynamo. We report the results of a liquid metal Taylor-Couette experiment that shows the occurrence of an azimuthal MRI in the expected range of Hartmann numbers.

In the last decades, the experimental study of dynamo action has made great progress. However, after the dynamo experiments in Karlsruhe and Riga, the von-Karman-Sodium (VKS) dynamo is only the third facility that has been able to demonstrate fluid flow driven self-generation of magnetic fields in a laboratory experiment. Further progress in the experimental examination of dynamo action is expected from the planned precession driven dynamo experiment that will be designed in the framework of the liquid sodium facility DRESDYN (DREsden Sodium facility for DYNamo and thermohydraulic studies). In this paper, we briefly present numerical models of the VKS dynamo that demonstrate the close relation between the axisymmetric field observed in that experiment and the soft iron material used for the flow driving impellers. We further show recent results of preparatory water experiments and design studies related to the precession dynamo and delineate the scientific prospects for the final set-up.

Many astrophysical phenomena (such as the slow rotation of neutron stars or the rigid rotation of the solar core) can be explained by the action of the Tayler instability of toroidal magnetic fields in the radiative zones of stars. In order to place the theory of this instability on a safe fundament it has been realized in a laboratory experiment measuring the critical field strength, the growth rates as well as the shape of the supercritical modes. A strong electrical current flows through a liquid-metal confined in a resting columnar container with an insulating outer cylinder. As the very small magnetic Prandtl number of the gallium-indium-tin alloy does not influence the critical Hartmann number of the field amplitudes, the electric currents for marginal instability can also be computed with direct numerical simulations. The results of this theoretical concept are confirmed by the experiment. Also the predicted growth rates of the order of minutes for the nonaxisymmetric perturbations are certified by the measurements. That they do not directly depend on the size of the experiment is shown as a consequence of the weakness of the applied fields and the absence of rotation.

In the current-driven, kink-type Tayler instability (TI) a sufficiently strong azimuthal magnetic field becomes unstable against non-axisymmetric perturbations. The TI has been discussed as a possible ingredient of the solar dynamo mechanism and a source of the helical structures in cosmic jets. It is also considered as a size limiting factor for liquid metal batteries. We report on a liquid metal TI experiment using a cylindrical column of the eutectic alloy GaInSn to which electrical currents of up to 8 kA are applied. We present results of external magnetic field measurements that indicate the occurrence of the TI in good agreement with numerical predictions. The interference of TI with the competing large scale convection, resulting from Joule heating, is also discussed.

The magnetorotational instability (MRI) is thought to play a key role in the formation of stars and black holes by sustaining the turbulence in hydrodynamically stable Keplerian accretion discs. In previous experiments the MRI was observed in a liquid metal Taylor-Couette flow at moderate Reynolds numbers by applying a helical magnetic field. The observation of this helical MRI (HMRI) was interfered with a significant Ekman pumping driven by solid end-caps that confined the instability only to a part of the Taylor-Couette cell. This paper describes the observation of the HMRI in an improved Taylor-Couette setup with the Ekman pumping significantly reduced by using split end-caps. The HMRI, which now spreads over the whole height of the cell, appears much sharper and in better agreement with numerical predictions. By analyzing various parameter dependencies we conclude that the observed HMRI represents a self-sustained global instability rather than a noise-sustained convective one.

The magnetorotational instability (MRI) plays an essential role in the formation of stars and black holes. By destabilizing hydrodynamically stable Keplerian flows, the MRI triggers turbulence and enables outward transport of angular momentum in accretion discs. We present the results of a liquid metal Taylor-Couette experiment under the influence of helical magnetic fields that show typical features of MRI at Reynolds numbers of the order 1000 and Hartmann numbers of the order 10. Particular focus is laid on an improved experiment in which split end caps are used to minimize the Ekman pumping.

On 11 November 1999, a self-exciting magnetic eigenfield was detected for the first time in the Riga liquid sodium dynamo experiment. We report on the long history leading to this event, and on the subsequent experimental campaigns which provided a wealth of data on the kinematic and the saturated regime of this dynamo. The present state of the theoretical understanding of both regimes is delineated, and some comparisons with other laboratory dynamo experiments are made.

The magnetorotational instability (MRI) plays a key role in the formation of stars and black holes, by enabling outward angular momentum transport in accretion disks. The use of combined axial and azimuthal magnetic fields allows the investigation of this effect in liquid metal flows at moderate Reynolds and Hartmann numbers. A variety of experimental results is presented showing evidence for the occurrence of the MRI in a Taylor-Couette flow using the liquid metal alloy GaInSn.

We study experimentally the flow of a liquid metal confined between differentially rotating cylinders, in the presence of externally imposed axial and azimuthal magnetic fields. For increasingly large azimuthal fields a wave-like disturbance arises, traveling along the axis of the cylinders. The wavelengths and speeds of these structures, as well as the field strengths and rotation rates at which they arise, are broadly consistent with theoretical predictions of such a traveling wave magnetorotational instability.

A recent paper [R. Hollerbach and G. Rudiger, Phys. Rev. Lett. 95, 124501 (2005)] has shown that the threshold for the onset of the magnetorotational instability (MRI) in a Taylor-Couette flow is dramatically reduced if both axial and azimuthal magnetic fields are imposed. In agreement with this prediction, we present results of a Taylor-Couette experiment with the liquid metal alloy GaInSn, showing evidence for the existence of the MRI at Reynolds numbers of order 1000 and Hartmann numbers of order 10.

After the dynamo experiment in November 1999 had shown magnetic field self-excitation in a spiraling liquid metal flow, in a second series of experiments emphasis was placed on the magnetic field saturation regime as the next principal step in the dynamo process. The dependence of the strength of the magnetic field on the rotation rate is studied. Various features of the saturated magnetic field are outlined and possible saturation mechanisms are discussed.

In an experiment at the Riga sodium dynamo facility, a slowly growing magnetic field eigenmode has been detected over a period of about 15 seconds. For a slightly decreased propeller rotation rate, additional measurements showed a slow decay of this mode. The measured results correspond satisfactory with numerical predictions for the growth rates and frequencies.