Context. The performance of interferometers has largely been increased over the last ten years. But the number of observable objects is still limited due to the low sensitivity and imaging capability of the current facilities. Studies have been done to propose a new generation of interferometers. Aims. The Carlina concept studied at the Haute-Provence Observatory consists in an optical interferometer configured as a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed co-spherical segments, a helium balloon or cables suspended between two mountains and/or pylons, carries a gondola containing the focal optics. This concept does not require delay lines. Methods. Since 2003, we have been building a technical demonstrator of this diluted telescope. The main goals of this project were to find the opto-mechanical solutions to stabilize the optics attached under cables at several tens of meters above the ground, and to characterize this diluted telescope under real conditions. In 2012, we have obtained metrology fringes, and co-spherized the primary mirrors within one micron accuracy. In 2013, we have tested the whole optical train: servo loop, metrology, and the focal gondola. Results. We obtained stellar fringes on Deneb in September 2013. In this paper, we present the characteristics of these observations: quality of the guiding, S /N reached, and possible improvements for a future system. Conclusions. It is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or pylons. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named Large Diluted Telescopes. Its optical architecture has many advantages for future projects: Planet Formation Imager, Post-ELTs, Interferometer in space.

Studies are under way to propose a new generation of post-VLTI interferometers. The Carlina concept studied at the Haute- Provence Observatory is one of the proposed solutions. It consists in an optical interferometer configured like a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed cospherical segments, a helium balloon (or cables suspended between two mountains), carries a gondola containing the focal optics. Since 2003, we have been building a technical demonstrator of this diluted telescope. First fringes were obtained in May 2004 with two closely-spaced primary segments and a CCD on the focal gondola. We have been testing the whole optical train with three primary mirrors. The main aim of this article is to describe the metrology that we have conceived, and tested under the helium balloon to align the primary mirrors separate by 5-10 m on the ground with an accuracy of a few microns. The servo loop stabilizes the mirror of metrology under the helium balloon with an accuracy better than 5 mm while it moves horizontally by 30 cm in open loop by 10-20 km/h of wind. We have obtained the white fringes of metrology; i.e., the three mirrors are aligned (cospherized) with an accuracy of {\approx} 1 micron. We show data proving the stability of fringes over 15 minutes, therefore providing evidence that the mechanical parts are stabilized within a few microns. This is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or under a balloon. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named diluted telescopes.

An EMCCD camera, designed from the ground up for extreme faint flux imaging, is presented. CCCP, the CCD Controller for Counting Photons, has been integrated with a CCD97 EMCCD from e2v technologies into a scientific camera at the Laboratoire d'Astrophysique Exp\'erimentale (LAE), Universit\'e de Montr\'eal. This new camera achieves sub-electron read-out noise and very low Clock Induced Charge (CIC) levels, which are mandatory for extreme faint flux imaging. Data gathered with the camera suggests that through enhanced manufacturing processes, which would avoid traps from being created, and with the help of the clock shapes producible with CCCP, the CIC generated during the vertical transfer could be virtually suppressed. The camera has been characterized in laboratory and used on the Observatoire du Mont M\'egantic 1.6-m telescope. The performance of the camera is discussed and experimental data with the first scientific data are presented.

An EMCCD camera, designed from the ground up for extreme faint flux imaging, is presented. CCCP, the CCD Controller for Counting Photons, has been integrated with a CCD97 EMCCD from e2v technologies into a scientific camera at the Laboratoire d'Astrophysique Experimentale (LAE), Universite de Montreal. This new camera achieves sub-electron read-out noise and very low Clock Induced Charge (CIC) levels, which are mandatory for extreme faint flux imaging. It has been characterized in laboratory and used on the Observatoire du Mont Megantic 1.6-m telescope. The performance of the camera is discussed and experimental data with the first scientific data are presented.

CCCP, a CCD Controller for Counting Photons, is presented. This new controller uses a totally new clocking architecture and allows to drive the CCD in a novel way. Its design is optimized for the driving of EMCCDs at up to 20MHz of pixel rate and fast vertical transfer. Using this controller, the dominant source of noise of EMCCDs at low flux level and high frame rate, the Clock Induced Charges, were reduced to 0.001 - 0.0018 electron/pixel/frame (depending of the electron multiplying gain), making efficient photon counting possible. CCCP will be deployed in 2009 on the ESO NTT through the 3D-NTT1 project and on the SOAR through the BTFI project.

Theoretically, L3CCDs are perfect photon counting devices promising high quantum efficiency ($\sim$90%) and sub-electron readout noise ($\sigma$<0.1 e-). We discuss how a back-thinned 512x512 frame-transfer L3CCD (CCD97) camera operating in pure photon counting mode would behave based on experimental data. The chip is operated at high electromultiplication gain, high analogic gain and high frame rate. Its performance is compared with a modern photon counting camera (GaAs photocathode, QE $\sim$28%) to see if L3CCD technology, in its current state, could supersede photocathode-based devices.