Normalized to: Gubarev, M.
[1]
oai:arXiv.org:1708.09783 [pdf] - 1587749
Calibration of the ART-XC mirror modules at MSFC
Krivonos, R.;
Tkachenko, A.;
Burenin, R.;
Filippova, E.;
Lapshov, I.;
Mereminskiy, I.;
Molkov, S.;
Pavlinsky, M.;
Sazonov, S.;
Gubarev, M.;
Kolodziejczak, J.;
O'Dell, S. L.;
Swartz, D.;
Zavlin, Vyacheslav E.;
Ramsey, B. D.
Submitted: 2017-08-31
The Astronomical Roentgen Telescope X-ray Concentrator (ART-XC) is a hard
X-ray telescope with energy response up to 30 keV, to be launched on board the
Spectrum Roentgen Gamma (SRG) spacecraft in 2018. ART-XC consists of seven
identical co-aligned mirror modules. Each mirror assembly is coupled with a
CdTe double-sided strip (DSS) focal-plane detector. Eight X-ray mirror modules
(seven flight and one spare units) for ART-XC were developed and fabricated at
the Marshall Space Flight Center (MSFC), NASA, USA. We present results of
testing procedures performed with an X-ray beam facility at MSFC to calibrate
the point spread function (PSF) of the mirror modules. The shape of the PSF was
measured with a high-resolution CCD camera installed in the focal plane with
defocusing of 7 mm, as required by the ART-XC design. For each module, we
performed a parametrization of the PSF at various angular distances Theta. We
used a King function to approximate the radial profile of the near on-axis PSF
(Theta<9 arcmin) and an ellipse fitting procedure to describe the morphology of
the far off-axis angular response (9<Theta<24 arcmin). We found a good
agreement between the seven ART-XC flight mirror modules at the level of 10%.
The on-axis angular resolution of the ART-XC optics varies between 27 and 33
arcsec (half-power diameter), except for the spare module.
[2]
oai:arXiv.org:1701.00792 [pdf] - 1534087
Exploring impulsive solar magnetic energy release and particle
acceleration with focused hard X-ray imaging spectroscopy
Christe, Steven;
Krucker, Samuel;
Glesener, Lindsay;
Shih, Albert;
Saint-Hilaire, Pascal;
Caspi, Amir;
Allred, Joel;
Battaglia, Marina;
Chen, Bin;
Drake, James;
Dennis, Brian;
Gary, Dale;
Gburek, Szymon;
Goetz, Keith;
Grefenstette, Brian;
Gubarev, Mikhail;
Hannah, Iain;
Holman, Gordon;
Hudson, Hugh;
Inglis, Andrew;
Ireland, Jack;
Ishikawa, Shinosuke;
Klimchuk, James;
Kontar, Eduard;
Kowalski, Adam;
Longcope, Dana;
Massone, Anna-Maria;
Musset, Sophie;
Piana, Michele;
Ramsey, Brian;
Ryan, Daniel;
Schwartz, Richard;
Stęślicki, Marek;
Turin, Paul;
Warmuth, Alexander;
Wilson-Hodge, Colleen;
White, Stephen;
Veronig, Astrid;
Vilmer, Nicole;
Woods, Tom
Submitted: 2017-01-03
How impulsive magnetic energy release leads to solar eruptions and how those
eruptions are energized and evolve are vital unsolved problems in Heliophysics.
The standard model for solar eruptions summarizes our current understanding of
these events. Magnetic energy in the corona is released through drastic
restructuring of the magnetic field via reconnection. Electrons and ions are
then accelerated by poorly understood processes. Theories include contracting
loops, merging magnetic islands, stochastic acceleration, and turbulence at
shocks, among others. Although this basic model is well established, the
fundamental physics is poorly understood. HXR observations using
grazing-incidence focusing optics can now probe all of the key regions of the
standard model. These include two above-the-looptop (ALT) sources which bookend
the reconnection region and are likely the sites of particle acceleration and
direct heating. The science achievable by a direct HXR imaging instrument can
be summarized by the following science questions and objectives which are some
of the most outstanding issues in solar physics (1) How are particles
accelerated at the Sun? (1a) Where are electrons accelerated and on what time
scales? (1b) What fraction of electrons is accelerated out of the ambient
medium? (2) How does magnetic energy release on the Sun lead to flares and
eruptions? A Focusing Optics X-ray Solar Imager (FOXSI) instrument, which can
be built now using proven technology and at modest cost, would enable
revolutionary advancements in our understanding of impulsive magnetic energy
release and particle acceleration, a process which is known to occur at the Sun
but also throughout the Universe.
[3]
oai:arXiv.org:1010.4892 [pdf] - 1041490
High-resolution x-ray telescopes
O'Dell, S. L.;
Brissenden, R. J.;
Davis, W. N.;
Elsner, R. F.;
Elvis, M.;
Freeman, M.;
Gaetz, T.;
Gorenstein, P.;
Gubarev, M. V.;
Jerius, D.;
Juda, M.;
Kolodziejczak, J. J.;
Murray, S.;
Petre, R.;
Podgorski, W.;
Ramsey, B. D.;
Reid, P. B.;
Saha, T.;
Schwartz, D. A.;
Trolier-McKinstry, S.;
Weisskopf, M. C.;
Wilke, R. H. T.;
Wolk, S.;
Zhang, W. W.
Submitted: 2010-10-23
High-energy astrophysics is a relatively young scientific field, made
possible by space-borne telescopes. During the half-century history of x-ray
astronomy, the sensitivity of focusing x-ray telescopes-through finer angular
resolution and increased effective area-has improved by a factor of a 100
million. This technological advance has enabled numerous exciting discoveries
and increasingly detailed study of the high-energy universe-including accreting
(stellar-mass and super-massive) black holes, accreting and isolated neutron
stars, pulsar-wind nebulae, shocked plasma in supernova remnants, and hot
thermal plasma in clusters of galaxies. As the largest structures in the
universe, galaxy clusters constitute a unique laboratory for measuring the
gravitational effects of dark matter and of dark energy. Here, we review the
history of high-resolution x-ray telescopes and highlight some of the
scientific results enabled by these telescopes. Next, we describe the planned
next-generation x-ray-astronomy facility-the International X-ray Observatory
(IXO). We conclude with an overview of a concept for the next next-generation
facility-Generation X. The scientific objectives of such a mission will require
very large areas (about 10000 m2) of highly-nested lightweight
grazing-incidence mirrors with exceptional (about 0.1-arcsecond) angular
resolution. Achieving this angular resolution with lightweight mirrors will
likely require on-orbit adjustment of alignment and figure.