We describe a new adaptive timestep criterion for integrating gravitational motion, which uses the tidal tensor to estimate the local dynamical timescale and scales the timestep proportionally. This provides a better candidate for a truly general-purpose gravitational timestep criterion than the usual prescription derived from the gravitational acceleration, which does not respect the equivalence principle, breaks down when $\mathbf{a}=0$, and does not obey the same dimensional scaling as the true timescale of orbital motion. We implement the tidal timestep criterion in the simulation code GIZMO, and examine controlled tests of collisionless galaxy and star cluster models, as well as fully-dynamic galaxy merger and cosmological dark matter simulations. The tidal criterion estimates the dynamical time faithfully, and generally provides a more efficient timestepping scheme compared to an acceleration criterion. Specifically, the tidal criterion achieves order-of-magnitude smaller energy errors for the same number of force evaluations in potentials with inner profiles shallower than $\rho \propto r^{-1}$ (ie. where $\mathbf{a}\rightarrow 0$), such as star clusters and cored galaxies. For a given problem these advantages must be weighed against the additional overhead of computing the tidal tensor on-the-fly, but in many cases this overhead is small.

It has been established for decades that rotation curves deviate from the Newtonian gravity expectation given baryons alone below a characteristic acceleration scale $g_{\dagger}\sim 10^{-8}\,\rm{cm\,s^{-2}}$, a scale promoted to a new fundamental constant in MOND. In recent years, theoretical and observational studies have shown that the star formation efficiency (SFE) of dense gas scales with surface density, SFE $\sim \Sigma/\Sigma_{\rm crit}$ with $\Sigma_{\rm crit} \sim \langle\dot{p}/m_{\ast}\rangle/(\pi\,G)\sim 1000\,\rm{M_{\odot}\,pc^{-2}}$ (where $\langle \dot{p}/m_{\ast}\rangle$ is the momentum flux output by stellar feedback per unit stellar mass in a young stellar population). We argue that the SFE, more generally, should scale with the local gravitational acceleration, i.e. that SFE $\sim g_{\rm tot}/g_{\rm crit} \equiv (G\,M_{\rm tot}/R^{2}) / \langle\dot{p}/m_{\ast}\rangle$, where $M_{\rm tot}$ is the total gravitating mass and $g_{\rm crit}=\langle\dot{p}/m_{\ast}\rangle = \pi\,G\,\Sigma_{\rm crit} \approx 10^{-8}\,\rm{cm\,s^{-2}} \approx g_{\dagger}$. Hence the observed $g_\dagger$ may correspond to the characteristic acceleration scale above which stellar feedback cannot prevent efficient star formation, and baryons will eventually come to dominate. We further show how this may give rise to the observed acceleration scaling $g_{\rm obs}\sim(g_{\rm baryon}\,g_{\dagger})^{1/2}$ (where $g_{\rm baryon}$ is the acceleration due to baryons alone) and flat rotation curves. The derived characteristic acceleration $g_{\dagger}$ can be expressed in terms of fundamental constants (gravitational constant, proton mass, and Thomson cross section): $g_{\dagger}\sim 0.1\,G\,m_{p}/\sigma_{\rm T}$.

We explore the possibility that GW190412, a binary black hole merger with a non-equal-mass ratio and significantly spinning primary, was formed through repeated black hole mergers in a dense super star cluster. Using a combination of semi-analytic prescriptions for the remnant spin and recoil kick of black hole mergers, we show that the mass ratio and spin of GW190412 are consistent with a binary black hole whose primary component has undergone two successive mergers from a population of $\sim 10M_{\odot}$ black holes in a high-metallicity environment. We then explore the production of GW190412-like analogs in the CMC Cluster Catalog, a grid of 148 $N$-body star cluster models, as well as a new model, behemoth, with nearly $10^7$ particles and initial conditions taken from a cosmological MHD simulation of galaxy formation. We show that the production of binaries with GW190412-like masses and spins is dominated by massive super star clusters with high metallicities and large central escape speeds. While many are observed in the local universe, our results suggest that a careful treatment of these massive clusters, many of which may have been disrupted before the present day, is necessary to characterize the production of unique gravitational-wave events produced through dynamics.

Pressure balance plays a central role in models of the interstellar medium (ISM), but whether and how pressure balance is realized in a realistic multiphase ISM is not yet well understood. We address this question using a set of FIRE-2 cosmological zoom-in simulations of Milky Way-mass disk galaxies, in which a multiphase ISM is self-consistently shaped by gravity, cooling, and stellar feedback. We analyze how gravity determines the vertical pressure profile as well as how the total ISM pressure is partitioned between different phases and components (thermal, dispersion/turbulence, and bulk flows). We show that, on average and consistent with previous more idealized simulations, the total ISM pressure balances the weight of the overlying gas. Deviations from vertical pressure balance increase with increasing galactocentric radius and with decreasing averaging scale. The different phases are in rough total pressure equilibrium with one another, but with large deviations from thermal pressure equilibrium owing to kinetic support in the cold and warm phases, which dominate the total pressure near the midplane. Bulk flows (e.g., inflows and fountains) are important at a few disk scale heights, while thermal pressure from hot gas dominates at larger heights. Overall, the total midplane pressure is well-predicted by the weight of the disk gas, and we show that it also scales linearly with the star formation rate surface density (Sigma_SFR). These results support the notion that the Kennicutt-Schmidt relation arises because Sigma_SFR and the gas surface density (Sigma_g) are connected via the ISM midplane pressure.

Understanding the evolution of self-gravitating, isothermal, magnetized gas is crucial for star formation, as these physical processes have been postulated to set the initial mass function (IMF). We present a suite of isothermal magnetohydrodynamic (MHD) simulations using the GIZMO code, that resolve the formation of individual stars in giant molecular clouds (GMCs), spanning a range of Mach numbers found in observed GMCs. As in past works, the mean and median stellar masses are sensitive to numerical resolution, because they are sensitive to low-mass stars that contribute a vanishing fraction of the overall stellar mass. The {\em mass-weighted} median stellar mass $M_\mathrm{50}$ becomes insensitive to resolution once turbulent fragmentation is well-resolved. Without imposing Larson-like scaling laws, our simulations find $M_\mathrm{50} \propto M_\mathrm{0} \mathcal{M}^{-3} \alpha_\mathrm{turb} \mathrm{SFE}^{1/3}$ for GMC mass $M_\mathrm{0}$, sonic Mach number $\mathcal{M}$, virial parameter $\alpha_\mathrm{turb}$, and star formation efficiency $\mathrm{SFE}=M_\mathrm{\star}/M_\mathrm{0}$. This fit agrees well with previous IMF results from the RAMSES, ORION2, and SphNG codes. Although $M_\mathrm{50}$ has no significant dependence on the magnetic field strength at the cloud scale, MHD is necessary to prevent a fragmentation cascade that results in non-convergent stellar masses. For initial conditions and SFE similar to star-forming GMCs in our Galaxy, we predict $M_\mathrm{50}$ to be $>20 M_{\odot}$, an order of magnitude larger than observed ($\sim 2 M_\odot$), together with an excess of brown dwarfs. Moreover, $M_\mathrm{50}$ is sensitive to initial cloud properties and evolves strongly in time within a given cloud, predicting much larger IMF variations than are observationally allowed. We conclude that physics beyond MHD turbulence and gravity are necessary ingredients for the IMF.

Giant molecular clouds (GMCs) are well-studied in the local Universe, however, exactly how their properties vary during galaxy evolution is poorly understood due to challenging resolution requirements, both observational and computational. We present the first time-dependent analysis of giant molecular clouds in a Milky Way-like galaxy and an LMC-like dwarf galaxy of the FIRE-2 (Feedback In Realistic Environments) simulation suite, which have sufficient resolution to predict the bulk properties of GMCs in cosmological galaxy formation self-consistently. We show explicitly that the majority of star formation outside the galactic center occurs within self-gravitating gas structures that have properties consistent with observed bound GMCs. We find that the typical cloud bulk properties such as mass and surface density do not vary more than a factor of 2 in any systematic way after the first Gyr of cosmic evolution within a given galaxy from its progenitor. While the median properties are constant, the tails of the distributions can briefly undergo drastic changes, which can produce very massive and dense self-gravitating gas clouds. Once the galaxy forms, we identify only two systematic trends in bulk properties over cosmic time: a steady increase in metallicity produced by previous stellar populations and a weak decrease in bulk cloud temperatures. With the exception of metallicity we find no significant differences in cloud properties between the Milky Way-like and dwarf galaxies. These results have important implications for cosmological star and star cluster formation and put especially strong constraints on theories relating the stellar initial mass function to cloud properties.

We report the formation of bound star clusters in a sample of high-resolution cosmological zoom-in simulations of z>5 galaxies from the FIRE project. We find that bound clusters preferentially form in high-pressure clouds with gas surface densities over 10^4 Msun pc^-2, where the cloud-scale star formation efficiency is near unity and young stars born in these regions are gravitationally bound at birth. These high-pressure clouds are compressed by feedback-driven winds and/or collisions of smaller clouds/gas streams in highly gas-rich, turbulent environments. The newly formed clusters follow a power-law mass function of dN/dM~M^-2. The cluster formation efficiency is similar across galaxies with stellar masses of ~10^7-10^10 Msun at z>5. The age spread of cluster stars is typically a few Myrs and increases with cluster mass. The metallicity dispersion of cluster members is ~0.08 dex in [Z/H] and does not depend on cluster mass significantly. Our findings support the scenario that present-day old globular clusters (GCs) were formed during relatively normal star formation in high-redshift galaxies. Simulations with a stricter/looser star formation model form a factor of a few more/fewer bound clusters per stellar mass formed, while the shape of the mass function is unchanged. Simulations with a lower local star formation efficiency form more stars in bound clusters. The simulated clusters are larger than observed GCs due to finite resolution. Our simulations are among the first cosmological simulations that form bound clusters self-consistently in a wide range of high-redshift galaxies.

We study stellar-halo formation using six Milky Way-mass galaxies in FIRE-2 cosmological zoom simulations. We find that $5-40\%$ of the outer ($50-300$ kpc) stellar halo in each system consists of $\textit{in-situ}$ stars that were born in outflows from the main galaxy. Outflow stars originate from gas accelerated by super-bubble winds, which can be compressed, cool, and form co-moving stars. The majority of these stars remain bound to the halo and fall back with orbital properties similar to the rest of the stellar halo at $z=0$.In the outer halo, outflow stars are more spatially homogeneous, metal rich, and alpha-element-enhanced than the accreted stellar halo. At the solar location, up to $\sim 10 \%$ of our kinematically-identified halo stars were born in outflows; the fraction rises to as high as $\sim 40\%$ for the most metal-rich local halo stars ([Fe/H] $> -0.5$). We conclude that the Milky Way stellar halo could contain local counterparts to stars that are observed to form in molecular outflows in distant galaxies. Searches for such a population may provide a new, near-field approach to constraining feedback and outflow physics. A stellar halo contribution from outflows is a phase-reversal of the classic halo formation scenario of Eggen, Lynden-Bell $\&$ Sandange, who suggested that halo stars formed in rapidly $\textit{infalling}$ gas clouds. Stellar outflows may be observable in direct imaging of external galaxies and could provide a source for metal-rich, extreme velocity stars in the Milky Way.

Measurements of the star formation efficiency (SFE) of giant molecular clouds (GMCs) in the Milky Way generally show a large scatter, which could be intrinsic or observational. We use magnetohydrodynamic simulations of GMCs (including feedback) to forward-model the relationship between the true GMC SFE and observational proxies. We show that individual GMCs trace broad ranges of observed SFE throughout collapse, star formation, and disruption. Low measured SFEs (<<1%) are "real" but correspond to early stages, the true "per-freefall" SFE where most stars actually form can be much larger. Very high (>>10%) values are often artificially enhanced by rapid gas dispersal. Simulations including stellar feedback reproduce observed GMC-scale SFEs, but simulations without feedback produce 20x larger SFEs. Radiative feedback dominates among mechanisms simulated. An anticorrelation of SFE with cloud mass is shown to be an observational artifact. We also explore individual dense "clumps" within GMCs and show that (with feedback) their bulk properties agree well with observations. Predicted SFEs within the dense clumps are ~2x larger than observed, possibly indicating physics other than feedback from massive (main sequence) stars is needed to regulate their collapse.

Most simulations of galaxies and massive giant molecular clouds (GMCs) cannot explicitly resolve the formation (or predict the main-sequence masses) of individual stars. So they must use some prescription for the amount of feedback from an assumed population of massive stars (e.g. sampling the initial mass function [IMF]). We perform a methods study of simulations of a star-forming GMC with stellar feedback from UV radiation, varying only the prescription for determining the luminosity of each stellar mass element formed (according to different IMF sampling schemes). We show that different prescriptions can lead to widely varying (factor of ~3) star formation efficiencies (on GMC scales) even though the average mass-to-light ratios agree. Discreteness of sources is important: radiative feedback from fewer, more-luminous sources has a greater effect for a given total luminosity. These differences can dominate over other, more widely-recognized differences between similar literature GMC-scale studies (e.g. numerical methods, cloud initial conditions, presence of magnetic fields). Moreover the differences in these methods are not purely numerical: some make different implicit assumptions about where and how massive stars form, and this remains deeply uncertain in star formation theory.

Young massive star clusters spanning $\sim 10^4 - 10^8 M_\odot$ in mass have been observed to have similar surface brightness profiles. Recent hydrodynamical simulations of star cluster formation have also produced star clusters with this structure. We argue analytically that this type of mass distribution arises naturally in the relaxation from a hierarchically-clustered distribution of stars into a monolithic star cluster through hierarchical merging. We show that arbitrary initial profiles will tend to converge to a universal profile under hierarchical merging, owing to phase-space mixing obeying certain conservation constraints. We perform $N$-body simulations of a pairwise merger of model star clusters and find that mergers readily produce the shallow surface brightness profiles observed in young massive clusters. Finally, we simulate the relaxation of a hierarchically-clustered mass distribution constructed from an idealized fragmentation model. Assuming only power-law spatial and kinematic scaling relations, these numerical experiments are able to reproduce the surface density profiles of observed young massive star clusters. Thus we provide physical motivation for the structure of young massive clusters within the paradigm of hierarchical star formation. This has important implications for the structure of nascent globular clusters.

A maximum stellar surface density $\Sigma_{max} \sim 3 \times 10^5\,{\rm M_\odot\,pc^{-2}}$ is observed across all classes of dense stellar systems (e.g. star clusters, galactic nuclei, etc.), spanning $\sim 8$ orders of magnitude in mass. It has been proposed that this characteristic scale is set by some dynamical feedback mechanism preventing collapse beyond a certain surface density. However, simple analytic models and detailed simulations of star formation moderated by feedback from massive stars argue that feedback becomes {\it less} efficient at higher surface densities (with the star formation efficiency increasing as $\sim \Sigma/\Sigma_{crit}$). We therefore propose an alternative model wherein stellar feedback becomes ineffective at moderating star formation above some $\Sigma_{crit}$, so the supply of star-forming gas is rapidly converted to stars before the system can contract to higher surface density. We show that such a model -- with $\Sigma_{crit}$ taken directly from the theory -- naturally predicts the observed $\Sigma_{max}$. $\Sigma_{max}\sim 100\Sigma_{crit}$ because the gas consumption time is longer than the global freefall time even when feedback is ineffective. Moreover the predicted $\Sigma_{max}$ is robust to spatial scale and metallicity, and is preserved even if multiple episodes of star formation/gas inflow occur. In this context, the observed $\Sigma_{max}$ directly tells us where feedback fails.

We present a suite of 3D multi-physics MHD simulations following star formation in isolated turbulent molecular gas disks ranging from 5 to 500 parsecs in radius. These simulations are designed to survey the range of surface densities between those typical of Milky Way GMCs ($\sim 10^2 M_\odot\,pc^{-2}}$) and extreme ULIRG environments ($\sim 10^2 M_\odot\,pc^{-2}}$) so as to map out the scaling of the cloud-scale star formation efficiency (SFE) between these two regimes. The simulations include prescriptions for supernova, stellar wind, and radiative feedback, which we find to be essential in determining both the instantaneous per-freefall ($\epsilon_{ff}$) and integrated ($\epsilon_{int}$) star formation efficiencies. In all simulations, the gas disks form stars until a critical stellar surface density has been reached and the remaining gas is blown out by stellar feedback. We find that surface density is a good predictor of $\epsilon_{int}$, as suggested by analytic force balance arguments from previous works. SFE eventually saturates to $\sim 1$ at high surface density. We also find a proportional relationship between $\epsilon_{ff}$ and $\epsilon_{int}$, implying that star formation is feedback-moderated even over very short time-scales in isolated clouds. These results have implications for star formation in galactic disks, the nature and fate of nuclear starbursts, and the formation of bound star clusters. The scaling of $\epsilon_{ff}$ with surface density is not consistent with the notion that $\epsilon_{ff}$ is always $\sim 1\%$ on the scale of GMCs, but our predictions recover the $\sim 1\%$ value for GMC parameters similar to those found in sprial galaxies, including our own.

A promising supermassive black hole seed formation channel is that of direct collapse from primordial gas clouds. We perform a suite of 3D hydrodynamics simulations of an isolated turbulent gas cloud to investigate conditions conducive to forming massive black hole seeds via direct collapse, probing the impact of cloud metallicity, gas temperature floor and cooling physics on cloud fragmentation. We find there is no threshold in metallicity which produces a sharp drop in fragmentation. When molecular cooling is not present, metallicity has little effect on fragmentation. When molecular cooling is present, fragmentation is suppressed by at most $\sim 25\%$, with the greatest suppression seen at metallicities below $2\%$ solar. A gas temperature floor $\sim 10^{4}$K produces the largest drop in fragmentation of any parameter choice, reducing fragmentation by $\sim 60\%$. At metallicities below $2\%$ solar or at temperatures $\sim 10^{3}$K we see a reduction in fragmentation $\sim 20-25 \%$. For a cloud of metallicity $2\%$ solar above and a temperature below $10^3$K, the detailed choices of temperature floor, metallicity, and cooling physics have little impact on fragmentation.

Using a state-of-the-art cosmological simulation of merging proto-galaxies at high redshift from the FIRE project, with explicit treatments of star formation and stellar feedback in the interstellar medium, we investigate the formation of star clusters and examine one of the formation hypothesis of present-day metal-poor globular clusters. We find that frequent mergers in high-redshift proto-galaxies could provide a fertile environment to produce long-lasting bound star clusters. The violent merger event disturbs the gravitational potential and pushes a large gas mass of ~> 1e5-6 Msun collectively to high density, at which point it rapidly turns into stars before stellar feedback can stop star formation. The high dynamic range of the reported simulation is critical in realizing such dense star-forming clouds with a small dynamical timescale, t_ff <~ 3 Myr, shorter than most stellar feedback timescales. Our simulation then allows us to trace how clusters could become virialized and tightly-bound to survive for up to ~420 Myr till the end of the simulation. Because the cluster's tightly-bound core was formed in one short burst, and the nearby older stars originally grouped with the cluster tend to be preferentially removed, at the end of the simulation the cluster has a small age spread.

A large number of astronomical phenomena exhibit remarkably similar scaling relations. The most well-known of these is the mass distribution $\mathrm{d} N/\mathrm{d} M\propto M^{-2}$ which (to first order) describes stars, protostellar cores, clumps, giant molecular clouds, star clusters and even dark matter halos. In this paper we propose that this ubiquity is not a coincidence and that it is the generic result of scale-free structure formation where the different scales are uncorrelated. We show that all such systems produce a mass function proportional to $M^{-2}$ and a column density distribution with a power law tail of $\mathrm{d} A/\mathrm{d} \ln\Sigma\propto\Sigma^{-1}$. In the case where structure formation is controlled by gravity the two-point correlation becomes $\xi_{2D}\propto R^{-1}$. Furthermore, structures formed by such processes (e.g. young star clusters, DM halos) tend to a $\rho\propto R^{-3}$ density profile. We compare these predictions with observations, analytical fragmentation cascade models, semi-analytical models of gravito-turbulent fragmentation and detailed "full physics" hydrodynamical simulations. We find that these power-laws are good first order descriptions in all cases.