The Space Variable Object Monitor (SVOM) is a forthcoming Chinese - French astrophysics space mission dedicated to the study of Gamma-ray bursts and high-energy transients. ECLAIRs, a wide-field hard X-ray coded mask imager, is the leading instrument for the transient detection and their first localisation. The sensitivity of such instruments is usually limited by the background, either of instrumental or astrophysical origin. Detailed estimations of the background are obtained by simulating the interaction of particles with the matter using, in the present case, the GEANT4 Monte-Carlo toolkit. However, this is a time consuming process, especially when it is needed to carry out all possible geometrical and orbital configurations. Instead, we present a much faster method that allows computing the background in either a static or dynamic (time dependent) way. The method is based on the preliminary calculation of a large particle database using the GEANT4 toolkit followed by a selection process based on the incoming direction and energy of the particles. This approach is as accurate as direct Monte-Carlo methods, while it reduces the computation time by a factor of $10^3 - 10^4$ for our application. We apply this method to compute the SVOM/ECLAIRs dynamic background.

Ultra-long gamma-ray bursts (ULGRBs) have very atypical durations of more than 2000 seconds. Even if their origins are discussed, the SVOM mission with its soft gamma-ray telescope ECLAIRs could detect ULGRBs and increase the sample of the few which have been detected so far by the Burst Alert Telescope aboard the Neil Gehrels Swift Observatory and some other instruments. In this paper, after a short description of the SVOM mission, we present methods developed to clean detector images from non-flat background and known source contributions in the onboard imaging process. We present an estimate of the ECLAIRs sensitivity to GRBs of various durations. Finally we study the capability of the image-trigger to detect ULGRBs.

To take advantage of the astrophysical potential of Gamma-Ray Bursts (GRBs), Chinese and French astrophysicists have engaged the SVOM mission (Space-based multi-band astronomical Variable Objects Monitor). Major advances in GRB studies resulting from the synergy between space and ground observations, the SVOM mission implements space and ground instrumentation. The scientific objectives of the mission put a special emphasis on two categories of GRBs: very distant GRBs at z$>$5 which constitute exceptional cosmological probes, and faint/soft nearby GRBs which allow probing the nature of the progenitors and the physics at work in the explosion. These goals have a major impact on the design of the mission: the on-board hard X-ray imager is sensitive down to 4 keV and computes on line image and rate triggers, and the follow-up telescopes on the ground are sensitive in the NIR. At the beginning of the next decade, SVOM will be the main provider of GRB positions and spectral parameters on very short time scale. The SVOM instruments will operate simultaneously with a wide range of powerful astronomical devices. This rare instrumental conjunction, combined with the relevance of the scientific topics connected with GRB studies, warrants a remarkable scientific return for SVOM. In addition, the SVOM instrumentation, primarily designed for GRB studies, composes a unique multi-wavelength observatory with rapid slew capability that will find multiple applications for the whole astronomy community beyond the specific objectives linked to GRBs. This report lists the scientific themes that will benefit from observations made with SVOM, whether they are specific GRB topics, or more generally all the issues that can take advantage of the multi-wavelength capabilities of SVOM.

The soft gamma-ray telescope ECLAIRs with its Scientific Trigger Unit is in charge of detecting Gamma-Ray Bursts (GRBs) on-board the future SVOM satellite. Using the "scientific software model" (SSM), we study the efficiency of both implemented trigger algorithms, the Count-Rate Trigger for time-scales below 20s and the Image Trigger for larger ones. The SMM provides a simulation of ECLAIRs with photon projection through the coded-mask onto the detection plane. We developed an input GRB database for the SSM based on GRBs light curves detected by the Fermi GBM instrument. We extrapolated the GRB spectra into the ECLAIRs band (4-120 keV) and projected them onto the detection plane, superimposed with cosmic extragalactic background photons (CXB). Several simulations were performed by varying the GRB properties (fluxes and positions in the field of view). We present first results of this study in this paper.

We study the contribution of thermal and non-thermal processes to the inverse Compton emission of the radio galaxy M 87 by modelling its broad-band emission. Through this we aim to derive insight into where within the AGN the X-ray, gamma-ray, and VHE emission is produced. We have analysed all available INTEGRAL IBIS/ISGRI data on M 87, spanning almost 10 years, to set an upper limit to the average hard X-ray flux of $f(20 - 60 \rm \, keV) < 3\times 10^{-12}$ $\rm \, erg \, cm^{-2} \, s^{-1}$, using several techniques beyond the standard analysis which are also presented here. We also analysed hard X-ray data from Suzaku/PIN taken late November 2006, and we report the first hard X-ray detection of M 87 with a flux of $f(20 - 60 \rm \, keV) = 10^{-11}\rm \, erg \, cm^{-2} \, s^{-1} $. In addition we analyse data from Fermi/LAT, INTEGRAL/JEM-X, and Suzaku/XIS. We collected historical radio/IR/optical and VHE data and combined them with the X-ray and gamma-ray data, to create broad-band spectral energy distributions for the average low-flux state and the flaring state. The resulting spectral energy distributions are modelled by applying a single-zone SSC model with a jet angle of theta = 15 degrees. We also show that modelling the core emission of M 87 using a single-zone synchrotron self-Compton model does represent the SED, suggesting that the core emission is dominated by a BL Lac type AGN core. Using SED modelling we also show that the hard X-ray emission detected in 2006 is likely due to a flare of the jet knot HST-1, rather than being related to the core.

The on-board Scientific Trigger Unit (UTS) is designed to detect Gamma Ray Bursts (GRBs) in real-time, using the data produced by the ECLAIRs camera, foreseen to equip the future French-Chinese satellite mission SVOM (Space-based Variable Objects Monitor). The UTS produces GRB alerts, sent to the ground for GRB follow-up observations, and requests the spacecraft slew to repoint its narrow field instruments onto the GRB afterglow. Because of the diversity of GRBs in duration and variability, two simultaneously running GRB trigger algorithms are implemented in the UTS, the so called Image Trigger performing systematic sky image reconstruction on time scales above 20 s, and the Count-Rate Trigger, selecting a time scale from 10 ms to 20 s showing an excess in count-rate over background estimate, prior to imaging the excess for localization on the sky. This paper describes both trigger algorithms and their implementation in a library, compiled for the Scientific Software Model (SSM) running on standard Linux machines, and which can also be cross-compiled for the Data Processing Model (DPM), in order to have the same algorithms running on both platforms. While the DPM permits to validate the hardware concept and benchmark the algorithms (see paper II), the SSM allows to optimize the algorithms and estimate the GRB trigger-rate of ECLAIRs/UTS. The result of running on the SSM a dynamic photon by photon simulation based on the BATSE GRB catalog is presented.

We present ECLAIRs, the Gamma-ray burst (GRB) trigger camera to fly on-board the Chinese-French mission SVOM. ECLAIRs is a wide-field ($\sim 2$\,sr) coded mask camera with a mask transparency of 40\% and a 1024 $\mathrm{cm}^2$ detection plane coupled to a data processing unit, so-called UGTS, which is in charge of locating GRBs in near real time thanks to image and rate triggers. We present the instrument science requirements and how the design of ECLAIRs has been optimized to increase its sensitivity to high-redshift GRBs and low-luminosity GRBs in the local Universe, by having a low-energy threshold of 4 keV. The total spectral coverage ranges from 4 to 150 keV. ECLAIRs is expected to detect $\sim 200$ GRBs of all types during the nominal 3 year mission lifetime. To reach a 4 keV low-energy threshold, the ECLAIRs detection plane is paved with 6400 $4\times 4~\mathrm{mm}^2$ and 1 mm-thick Schottky CdTe detectors. The detectors are grouped by 32, in 8x4 matrices read by a low-noise ASIC, forming elementary modules called XRDPIX. In this paper, we also present our current efforts to investigate the performance of these modules with their front-end electronics when illuminated by charged particles and/or photons using radioactive sources. All measurements are made in different instrument configurations in vacuum and with a nominal in-flight detector temperature of $-20^\circ$C. This work will enable us to choose the in-flight configuration that will make the best compromise between the science performance and the in-flight operability of ECLAIRs. We will show some highlights of this work.

We present here results on the source location accuracy of the INTEGRAL IBIS/ISGRI coded mask telescope, based on ten years of INTEGRAL data and on recent developments in the data analysis procedures. Data were selected and processed with the new Off-line Scientific Analysis pipeline (OSA10.0) that benefits from the most accurate background corrections, the most performing coding noise cleaning and sky reconstruction algorithms available. We obtained updated parameters for the evaluation of the point source location error from the source signal to noise ratio. These results are compared to previous estimates and to theoretical expectations. Also thanks to a new fitting procedure the typical error at 90% confidence level for a source at a signal to noise of 10 is now estimated to be 1.5 arcmin. Prospects for future analysis on the Point Spread Function fitting procedure and on the evaluation of residual biases are also presented. The new consolidated parameters describing the source location accuracy that will be derived in the near future using the whole INTEGRAL database, the new fitting technique and the bias correction, will be included in future versions of OSA.

Since the release of the INTEGRAL Offline Scientific Analysis (OSA) software version 9.0, the ghost busters module has been introduced in the INTEGRAL/IBIS imaging procedure, leading to an improvement of the sensitivity around bright sources up to a factor of 7. This module excludes in the deconvolution process the IBIS/ISGRI detector pixels corresponding to the projection of a bright source through mask elements affected by some defects. These defects are most likely associated with screws and glue fixing the IBIS mask to its support. Following these major improvements introduced in OSA 9, a second order correction is still required to further remove the residual noise, now at a level of 0.2-1% of the brightest source in the field of view. In order to improve our knowledge of the IBIS mask transparency, a calibration campaign has been carried out during 2010-2012. We present here the analysis of these data, together with archival observations of the Crab and Cyg X-1, that allowed us to build a composite image of the mask defects and to investigate the origin of the residual noise in the IBIS/ISGRI images. Thanks to this study, we were able to point out a simple modification of the ISGRI analysis software that allows to significantly improve the quality of the images in which bright sources are detected at the edge of the field of view. Moreover, a refinement of the area excluded by the ghost busters module is considered, and preliminary results show improvements to be further tested. Finally, this study indicates further directions to be investigated for improving the ISGRI sensitivity, such as taking into account the thickness of the screws in the mask model or studying the possible discrepancy between the modeled and actual mask element bridges.

The main objective of the Wide Field Monitor (WFM) on the LOFT mission is to provide unambiguous detection of the high-energy sources in a large field of view, in order to support science operations of the LOFT primary instrument, the LAD. The monitor will also provide by itself a large number of results on the timing and spectral behaviour of hundreds of galactic compact objects, Active Galactic Nuclei and Gamma-Ray Bursts. The WFM is based on the coded aperture concept where a position sensitive detector records the shadow of a mask projected by the celestial sources. The proposed WFM detector plane, based on Double Sided micro-Strip Silicon Detectors (DSSD), will allow proper 2-dimensional recording of the projected shadows. Indeed the positioning of the photon interaction in the detector with equivalent fine resolution in both directions insures the best imaging capability compatible with the allocated budgets for this telescope on LOFT. We will describe here the overall configuration of this 2D-WFM and the design and characteristics of the DSSD detector plane including its imaging and spectral performances. We will also present a number of simulated results discussing the advantages that this configuration offers to LOFT. A DSSD-based WFM will in particular reduce significantly the source confusion experienced by the WFM in crowded regions of the sky like the Galactic Center and will in general increase the observatory science capability of the mission.

Gamma-ray bursts (GRB) sign energetic explosions in the Universe, occurring at cosmological distances. Multi-wavelength observations of GRB allow to study their properties and to use them as cosmological tools. In 2012 the space borne gamma-ray telescope ECLAIRs is expected to provide accurate GRB localizations on the sky in near real-time, necessary for ground-based follow-up observations. Led by CEA Saclay, France, the project is currently in its technical design phase. ECLAIRs is optimized to detect highly red-shifted GRB thanks to a 4 keV low energy threshold. A coded mask telescope with a 1024 cm^2 detection plane of 80x80 CdTe pixels permanently observes a 2 sr sky field. The on-board trigger detects GRB using count-rate increase monitors on multiple time-scales and cyclic images. It computes sky images in the 4-50 keV energy range by de-convolving detector plane images with the mask pattern and localizes newly detected sources with <10 arcmin accuracy. While individual GRB photons are available hours later, GRB alerts are transmitted over a VHF network within seconds to ground, in particular to robotic follow-up telescopes, which refine GRB localizations to the level needed by large spectroscopic telescopes. This paper describes the ECLAIRs concept, with emphasis on the GRB triggering scheme.

We study the spectrum of the cosmic X-ray background (CXB) in energy range $\sim$5-100 keV. Early in 2006 the INTEGRAL observatory performed a series of four 30ksec observations with the Earth disk crossing the field of view of the instruments. The modulation of the aperture flux due to occultation of extragalactic objects by the Earth disk was used to obtain the spectrum of the Cosmic X-ray Background(CXB). Various sources of contamination were evaluated, including compact sources, Galactic Ridge emission, CXB reflection by the Earth atmosphere, cosmic ray induced emission by the Earth atmosphere and the Earth auroral emission. The spectrum of the cosmic X-ray background in the energy band 5-100 keV is obtained. The shape of the spectrum is consistent with that obtained previously by the HEAO-1 observatory, while the normalization is $\sim$10% higher. This difference in normalization can (at least partly) be traced to the different assumptions on the absolute flux from the Crab Nebulae. The increase relative to the earlier adopted value of the absolute flux of the CXB near the energy of maximum luminosity (20-50 keV) has direct implications for the energy release of supermassive black holes in the Universe and their growth at the epoch of the CXB origin.

Context. In coded mask techniques, reconstructed sky images are pseudo-images: they are maps of the correlation between the image recorded on a detector and an array derived from the coded mask pattern. Aims. The INTEGRAL/IBIS telescope provides images where the flux of each detected source is given by the height of the local peak in the correlation map. As such, it cannot provide an estimate of the flux of an extended source. What is needed is intensity sky images giving the flux per solide angle as typically done at other wavelengths. Methods. In this paper, we present the response of the INTEGRAL IBIS/ISGRI coded mask instrument to extended sources. We develop a general method based on analytical calculations in order to measure the intensity and the associated error of any celestial source and validated with Monte-Carlo simulations. Results. We find that the sensitivity degrades almost linearly with the source extent. Analytical formulae are given as well as an easy-to-use recipe for the INTEGRAL user. We check this method on IBIS/ISGRI data but these results are general and applicable to any coded mask telescope.

3C 111 is an X-ray bright broad-line radio galaxy which is classified as a Fanaroff-Riley type II source with a double-lobe/single jet morphology, and reported superluminal motion. It is a well-known X-ray source, and was observed by every major X-ray observatory since HEAO-1. In this paper we present the results of the RXTE and INTEGRAL data analysis and compare them with the results of the previous observations.

The imager on board INTEGRAL (IBIS) presently provides the most detailed sky images ever obtained at energies above 30 keV. The telescope is based on a coded aperture imaging system which allows to obtain sky images in a large field of view 29deg x 29deg with an angular resolution of 12'. The System Point Spread Function of the telescope and its detailed characteristics are here described along with the specific analysis algorithms used to derive the accurate point-like source locations. The derived location accuracy is studied using the first in-flight calibration data on strong sources for the IBIS/ISGRI system. The dependence of the calibrated location accuracy with the signal to noise ratio of the sources is presented. These preliminary studies demonstrate that the IBIS/ISGRI telescope and the standard scientific analysis software allow source localizations with accuracy at 90% confidence level better than 1' for sources with signal to noise ratios > 30 over the whole field of view, in agreement with the expected performances of the instrument.

The gamma-ray astronomical observatory INTEGRAL, succesfully launched on 17th October 2002, carries two large gamma-ray telescopes. One of them is the coded-mask imaging gamma-ray telescope onboard the INTEGRAL satellite (IBIS) which provides high-resolution (~ 12') sky images of 29deg x 29deg in the energy range from 15 keV to 10 MeV with typical on-axis sensitivity of ~ 1 mCrab at 100 keV (3 sigma, 10E6 s exposure). We report here the general description of the IBIS coded-mask imaging system and of the standard IBIS science data analysis procedures. These procedures reconstruct, clean and combine IBIS sky images providing at the same time detection, identification and preliminary analysis of point-like sources present in the field. Spectral extraction has also been implemented and is based on simultaneous fitting of source and background shadowgram models to detector images. The procedures are illustrated using some of the IBIS data collected during the inflight calibrations and present performance is discussed. The analysis programs described here have been integrated as instrument specific software in the Integral Science Data Center (ISDC) analysis software packages currently used for the Quick Look, Standard and Off-line Scientific Analysis.

ISGRI, the IBIS low energy camera (15 keV - 1 MeV) on board INTEGRAL, is the first large CdTe gamma-ray imager in orbit. We present here an overview of the ISGRI in-flight calibrations performed during the first months after launch. We discuss the stability of the camera as well as the CdTe pixels response under cosmic radiation. The energy calibra tions were done using lead and tungsten fluorescence lines and the $\mathrm{^{22}Na}$ calibration unit. Thermal effects and charge correction algorithm are discussed, and the resulting energy resolution is presented. The ISGRI background spatial and spectral non-uniformity is also described, and some image correction results are presented.

We report on INTEGRAL/IBIS observations of the Vela region during a Galactic Plane Scan (hereafter GPS) presenting the IBIS in-flight performances during these operations. Among all the known sources in the field of view we clearly detect 4U 0836-429, Vela X-1, Cen X-3, GX 301-2, 1E 1145.1-6141, and H0918-549 in the 20-40 keV energy range. Only Vela X-1 and GX 301-2 are detected in the 40-80 keV energy range, and no sources are visible above. We present the results of each individual observation (~2200 s exposure), as well as those from the mosaic of these scans.

The IBIS telescope onboard INTEGRAL, the ESA gamma-ray space mission to be launched in 2002, is a soft gamma-ray (20 keV - 10 MeV) device based on a coded aperture imaging system. We describe here basic concepts of coded masks, the imaging system of the IBIS telescope, and the standard data analysis procedures to reconstruct sky images. This analysis includes, for both the low-energy detector layer (ISGRI) and the high energy layer (PICSIT), iterative procedures which decode recorded shadowgrams, search for and locate sources, clean for secondary lobes, and then rotate and compose sky images. These procedures will be implemented in the Quick Look and Standard Analysis of the INTEGRAL Science Data Center (ISDC) as IBIS Instrument Specific Software.