The Global-Multi Conjugated Adaptive Optics (GMCAO) approach offers an alternative way to correct an adequate scientific Field of View (FoV) using only natural guide stars (NGSs) to extremely large ground-based telescopes. Thus, even in the absence of laser guide stars, a GMCAO-equipped ELT-like telescope can achieve optimal performance in terms of Strehl Ratio (SR), retrieving impressive results in studying star-poor fields, as in the cases of the deep field observations. The benefits and usability of GMCAO have been demonstrated by studying 6000 mock high redshift galaxies in the Chandra Deep Field South region. However, a systematic study simulating observations in several portions of the sky is mandatory to have a robust statistic of the GMCAO performance. Technical, tomographic and astrophysical parameters, discussed here, are given as inputs to GIUSTO, an IDL-based code that estimates the SR over the considered field, and the results are analyzed with statistical considerations. The best performance is obtained using stars that are relatively close to the Scientific FoV; therefore, the SR correlates with the mean off-axis position of NGSs, as expected, while their magnitude plays a secondary role. This study concludes that the SRs correlate linearly with the galactic latitude, as also expected. Because of the lack of natural guide stars needed for low-order aberration sensing, the GMCAO confirms as a promising technique to observe regions that can not be studied without the use of laser beacons. It represents a robust alternative way or a risk mitigation strategy for laser approaches on the ELTs.

Several astronomical surveys aimed at the investigation of the extragalactic components were carried out in order to map systematically the universe and its constituents. An excellent level of detail is needed, and it is possible only using space telescopes or with the application of adaptive optics (AO) techniques for ground-based observatories. By simulating K-band observations of 6000 high-redshift galaxies in the Chandra Deep Field South region, we have already shown how an extremely large telescope can carry out photometric surveys successfully using the Global-MCAO, a natural guide stars based technique that allows the development of extragalactic research, otherwise impracticable without using laser guide stars. As the outcome of the analysis represents an impact science case for the new instruments on upcoming ground-based telescopes, here we show how the investigation of other observed deep fields could profit from such a technique. Further to an overview of the surveys suitable for the proposed approach, we show preliminary estimations both on geometrical (FoV and height) and purely AO perspectives (richness and homogeneity of guide stars in the area) for planned giant telescope.

A robust post processing technique is mandatory to analyse the coronagraphic high contrast imaging data. Angular Differential Imaging (ADI) and Principal Component Analysis (PCA) are the most used approaches to suppress the quasi-static structure in the Point Spread Function (PSF) in order to revealing planets at different separations from the host star. The focus of this work is to apply these two data reduction techniques to obtain the best limit detection for each coronagraphic setting that has been simulated for the SHARK-NIR, a coronagraphic camera that will be implemented at the Large Binocular Telescope (LBT). We investigated different seeing conditions ($0.4"-1"$) for stellar magnitude ranging from R=6 to R=14, with particular care in finding the best compromise between quasi-static speckle subtraction and planet detection.

The wavefront sensors used today at the biggest World's telescopes have either a high dynamic range or a high sensitivity, and they are subject to a linear trade off between these two parameters. A new class of wavefront sensors, the Generalised Optical Differentiation Wavefront Sensors, has been devised, in a way not to undergo this linear trade off and to decouple the dynamic range from the sensitivity. This new class of WFSs is based on the light filtering in the focal plane from a dedicated amplitude filter, which is a hybrid between a linear filter, whose physical dimension is related to the dynamic range, and a step in the amplitude, whose size is related to the sensitivity. We propose here a possible technical implementation of this kind of WFS, making use of a simple holographic diffuser to diffract part of the light in a ring shape around the pin of a pyramid wavefront sensor. In this way, the undiffracted light reaches the pin of the pyramid, contributing to the high sensitivity regime of the WFS, while the diffused light is giving a sort of static modulation of the pyramid, allowing to have some signal even in high turbulence conditions. The holographic diffuser zeroth order efficiency is strictly related to the sensitivity of the WFS, while the diffusing angle of the diffracted light gives the amount of modulation and thus the dynamic range. By properly choosing these two parameters it is possible to build a WFS with high sensitivity and high dynamic range in a static fashion. Introducing dynamic parts in the setup allows to have a set of different diffuser that can be alternated in front of the pyramid, if the change in the seeing conditions requires it.

In this article, we present a simulator conceived for the conceptual study of an AO-fed high-contrast coronagraphic imager. The simulator implements physical optics: a complex disturbance (the electric field) is Fresnel-propagated through any user-defined optical train, in an end-to-end fashion. The effect of atmospheric residual aberrations and their evolution with time can be reproduced by introducing in input a temporal sequence of phase screens: synthetic images are then generated by co-adding instantaneous PSFs. This allows studying with high accuracy the impact of AO correction on image quality for different integration times and observing conditions. In addition, by conveniently detailing the optical model, the user can easily implement any coronagraphic set-up and introduce optical aberrations at any position. Furthermore, generating multiple images can allow exploring detection limits after a differential post-processing algorithm is applied (e.g. Angular Differential Imaging). The simulator has been developed in the framework of the design of SHARK-NIR, the second-generation high contrast imager selected for the Large Binocular Telescope.

In the context of ADONI - the ADaptive Optics National laboratory of INAF - we are arranging for a facility, accessible to the AO community, in which visiting multi-purpose instrumentation, e.g. systems and prototypes of innovative AO concepts, may be directly tested on sky. The facility is located at the 182cm Copernico telescope in Asiago, the largest telescope in Italy, at its Coude focus, for which refurbishment activities are carried out, given that this focus was initially foreseen in the design, but never implemented and used till today. The facility hosts a laboratory where specialized visiting AO instrumentation may be properly accommodated on an optical bench for on-sky demonstrations. We present the current status of the facility, describing the opto-mechanical design implemented at the telescope that allows to redirect the light toward the Coude focus, the tests on the opto-mechanics carried on for stability verification, the integration of the optical and mechanical components within the preexisting structure.

We describe the preliminary optimized layout for a partially optimized concept of an optical-8m class VLT-like 2x2 segmented camera where each channel is assisted by an equivalent of an MCAO system where the ground layer correction is commonly employed while the high altitude ones is performed in an open-loop fashion. While we derive the basic relationships among the Field of View and attainable correction with a pre-defined choice for the hardware, we discuss sky coverage and wavefront sensing issues employing natural and artificial references, involving the latest stateof-the-art in the development of wavefront sensing. We show that a flexible approach allow for a compensated Field of View that is variable and can be properly tuned matching the current turbulence situation and the requirement in term of quality of the compensation. A preliminary description of the overall optomechanical package is given as well along with a rough estimates of the efforts required to translates such a concept into reality.

Global MCAO aims to exploit a very wide technical field of view to find AO-suitable NGSs, with the goal to increase the overall sky coverage. The concept foresees the use of numerical entities, called Virtual Deformable Mirrors, to deal with the nominally thin depth of focus reduction, due to the field of view size. These objects act together as a best fit of the atmospheric layers behavior, in a limited number of conjugation altitudes, so to become the starting point for a further optimization of the real deformable mirrors shapes for the correction of the -smaller- scientific field. We developed a simulator, which numerically combines, in a Layer-Oriented fashion, the measurements of a given number of wavefront sensors, each dedicated to one reference star, to optimize the performance in the NGSs directions. Here we describe some details of the numerical code employed in the simulator, along with the philosophy behind some of the algorithms involved, listing the main goals and assumptions. Several details, including, for instance, how the number and conjugation heights of the VDMs are chosen in the simulation code, are briefly given. Furthermore, we also discuss the possible approaches to define a merit function to optimize the best solution. Finally, after an overview of the remaining issues and limitations of the method, numerical results obtained studying the influence of Cn2 profiles on the reconstruction quality and the delivered SR in a number of fields in the sky are given.

SHARK-NIR is one of the two coronagraphic instruments proposed for the Large Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging in the visible domain), it will offer the possibility to do binocular observations combining direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy in a wide wavelength domain, going from 0.5{\mu}m to 1.7{\mu}m. Additionally, the contemporary usage of LMIRCam, the coronagraphic LBTI NIR camera, working from K to L band, will extend even more the covered wavelength range. In January 2017 SHARK-NIR underwent a successful final design review, which endorsed the instrument for construction and future implementation at LBT. We report here the final design of the instrument, which foresees two intermediate pupil planes and three focal planes to accomodate a certain number of coronagraphic techniques, selected to maximize the instrument contrast at various distances from the star. Exo-Planets search and characterization has been the science case driving the instrument design, but the SOUL upgrade of the LBT AO will increase the instrument performance in the faint end regime, allowing to do galactic (jets and disks) and extra-galactic (AGN and QSO) science on a relatively wide sample of targets, normally not reachable in other similar facilities.

We describe the concept of splitting spatial frequency perturbations into some kind of pupil planes wavefront sensors. Further to the existing approach of dropping higher spatial frequency to suppress aliasing effects (the so-called spatial filtered Shack-Hartmann), we point out that spatial frequencies splitting and mixing of these in a proper manner, could be handled in order to exhibit some practical or fundamental advantages. In this framework we describe the idea behind such class of concepts and we derive the relationship useful to determine if, by which extent, and under what kind of merit function, these devices can overperform existing conventional sensors.

We revisit one class of z-invariant WaveFront sensor where the LGS is fired aside of the telescope aperture. In this way there is a spatial dependence on the focal plane with respect to the height where the resonant scattering occurs. We revise the basic parameters involving the geometry and we propose various merit functions to define how much improvement can be attained by a z-invariant approach. We show that refractive approaches are not viable and we discuss several solutions involving reflective ones in what has been nicknamed "ingot wavefront sensor" discussing the degrees of freedom required to keep tracking and the basic recipe for the optical design.

The era of the next generation of giant telescopes requires not only the advent of new technologies but also the development of novel methods, in order to exploit fully the extraordinary potential they are built for. Global Multi Conjugate Adaptive Optics (GMCAO) pursues this approach, with the goal of achieving good performance over a field of view of a few arcmin and an increase in sky coverage. In this article, we show the gain offered by this technique to an astrophysical application, such as the photometric survey strategy applied to the Chandra Deep Field South as a case study. We simulated a close-to-real observation of a 500 x 500 arcsec^2 extragalactic deep field with a 40-m class telescope that implements GMCAO. We analysed mock K-band images of 6000 high-redshift (up to z = 2.75) galaxies therein as if they were real to recover the initial input parameters. We attained 94.5 per cent completeness for source detection with SEXTRACTOR. We also measured the morphological parameters of all the sources with the two-dimensional fitting tools GALFIT. The agreement we found between recovered and intrinsic parameters demonstrates GMCAO as a reliable approach to assist extremely large telescope (ELT) observations of extragalactic interest.

Dark wavefront sensing takes shape following quantum mechanics concepts in which one is able to "see" an object in one path of a two-arm interferometer using an as low as desired amount of light actually "hitting" the occulting object. A theoretical way to achieve such a goal, but in the realm of wavefront sensing, is represented by a combination of two unequal beams interferometer sharing the same incoming light, and whose difference in path length is continuously adjusted in order to show different signals for different signs of the incoming perturbation. Furthermore, in order to obtain this in white light, the path difference should be properly adjusted vs the wavelength used. While we incidentally describe how this could be achieved in a true optomechanical setup, we focus our attention to the simulation of a hypothetical "perfect" dark wavefront sensor of this kind in which white light compensation is accomplished in a perfect manner and the gain is selectable in a numerical fashion. Although this would represent a sort of idealized dark wavefront sensor that would probably be hard to match in the real glass and metal, it would also give a firm indication of the maximum achievable gain or, in other words, of the prize for achieving such device. Details of how the simulation code works and first numerical results are outlined along with the perspective for an in-depth analysis of the performances and its extension to more realistic situations, including various sources of additional noise.