sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Green, Lucie M.

Normalized to: Green, L.

30 article(s) in total. 95 co-authors, from 1 to 12 common article(s). Median position in authors list is 3,0.

[1]  oai:arXiv.org:1911.01314  [pdf] - 2026232
Understanding the plasma and magnetic field evolution of a filament using observations and Nonlinear force-free field modelling
Comments: 17 pages, 10 figures
Submitted: 2019-11-04
We present observations and magnetic field models of an intermediate filament present on the Sun in August 2012, associated with a polarity inversion line that extends from AR 11541 in the east into the quiet sun at its western end. A combination of SDO/AIA, SDO/HMI, and GONG H alpha data allow us to analyse the structure and evolution of the filament from 2012 August 4 23:00 UT to 2012 August 6 08:00 UT when the filament was in equilibrium. By applying the flux rope insertion method, nonlinear force-free field models of the filament are constructed using SDO/HMI line-of-sight magnetograms as the boundary condition at the two times given above. Guided by observed filament barbs, both modelled flux ropes are split into three sections each with a different value of axial flux to represent the non-uniform photospheric field distribution. The flux in the eastern section of the rope increases by 4$\times$10$^{20}$ Mx between the two models, which is in good agreement with the amount of flux cancelled along the internal PIL of AR 11541, calculated to be 3.2$\times$10$^{20}$ Mx. This suggests that flux cancellation builds flux into the filament's magnetic structure. Additionally, the number of field line dips increases between the two models in the locations where flux cancellation, the formation of new filament threads and growth of the filament is observed. This suggests that flux cancellation associated with magnetic reconnection forms concave-up magnetic field that lifts plasma into the filament. During this time, the free magnetic energy in the models increases by 0.2$\times$10$^{31}$ ergs.
[2]  oai:arXiv.org:1907.12820  [pdf] - 1958233
Stealth Coronal Mass Ejections from Active Regions
Comments: 20 pages, 10 figures, accepted for publication in The Astrophysical Journal
Submitted: 2019-07-30
Stealth coronal mass ejections (CMEs) are eruptions from the Sun that have no obvious low coronal signature. These CMEs are characteristically slower events, but can still be geoeffective and affect space weather at Earth. Therefore, understanding the science underpinning these eruptions will greatly improve our ability to detect and, eventually, forecast them. We present a study of two stealth CMEs analysed using advanced image processing techniques that reveal their faint signatures in observations from the extreme ultraviolet (EUV) imagers onboard the Solar and Heliospheric Observatory (SOHO), Solar Dynamics Observatory (SDO), and Solar Terrestrial Relations Observatory (STEREO) spacecraft. The different viewpoints given by these spacecraft provide the opportunity to study each eruption from above and the side contemporaneously. For each event, EUV and magnetogram observations were combined to reveal the coronal structure that erupted. For one event, the observations indicate the presence of a magnetic flux rope before the CME's fast rise phase. We found that both events originated in active regions and are likely to be sympathetic CMEs triggered by a nearby eruption. We discuss the physical processes that occurred in the time leading up to the onset of each stealth CME and conclude that these eruptions are part of the low-energy and velocity tail of a distribution of CME events, and are not a distinct phenomenon.
[3]  oai:arXiv.org:1902.06948  [pdf] - 1868094
Transient Inverse-FIP Plasma Composition Evolution within a Confined Solar Flare
Comments: 18 pages, 9 figures
Submitted: 2019-02-19
Understanding elemental abundance variations in the solar corona provides an insight into how matter and energy flow from the chromosphere into the heliosphere. Observed variations depend on the first ionization potential (FIP) of the main elements of the Sun's atmosphere. High-FIP elements (>10 eV) maintain photospheric abundances in the corona, whereas low-FIP elements have enhanced abundances. Conversely, inverse FIP (IFIP) refers to the enhancement of high-FIP or depletion of low-FIP elements. We use spatially resolved spectroscopic observations, specifically the Ar XIV/Ca XIV intensity ratio, from Hinode's Extreme-ultraviolet Imaging Spectrometer to investigate the distribution and evolution of plasma composition within two confined flares in a newly emerging, highly sheared active region. During the decay phase of the first flare, patches above the flare ribbons evolve from the FIP to the IFIP effect, while the flaring loop tops show a stronger FIP effect. The patch and loop compositions then evolve toward the pre-flare basal state. We propose an explanation of how flaring in strands of highly sheared emerging magnetic fields can lead to flare-modulated IFIP plasma composition over coalescing umbrae which are crossed by flare ribbons. Subsurface reconnection between the coalescing umbrae leads to the depletion of low-FIP elements as a result of an increased wave flux from below. This material is evaporated when the flare ribbons cross the umbrae. Our results are consistent with the ponderomotive fractionation model (Laming2015) for the creation of IFIP-biased plasma.
[4]  oai:arXiv.org:1808.10635  [pdf] - 1767624
The role of flux cancellation in eruptions from bipolar active regions
Comments: 16 pages, 4 figures
Submitted: 2018-08-31
The physical processes or trigger mechanisms that lead to the eruption of coronal mass ejections (CMEs), the largest eruptive phenomenon in the heliosphere, are still undetermined. Low-altitude magnetic reconnection associated with flux cancellation appears to play an important role in CME occurrence as it can form an eruptive configuration and reduce the magnetic flux that contributes to the overlying, stabilising field. We conduct the first comprehensive study of 20 small bipolar active regions in order to probe the role of flux cancellation as an eruption trigger mechanism. We categorise eruptions from the bipolar regions into three types related to location and find that the type of eruption produced depends on the evolutionary stage of the active region. In addition we find that active regions that form eruptive structures by flux cancellation (low-altitude reconnection) had, on average, lower flux cancellation rates than the active region sample as a whole. Therefore, while flux cancellation plays a key role, by itself it is insufficient for the production of an eruption. The results support that although flux cancellation in a sheared arcade may be able to build an eruptive configuration, a successful eruption depends upon the removal of sufficient overlying and stabilising field. Convergence of the bipole polarities also appears to be present in regions that produce an eruption. These findings have important implications for understanding the physical processes that occur on our Sun in relation to CMEs and for space weather forecasting.
[5]  oai:arXiv.org:1803.04769  [pdf] - 1656381
Coronal Magnetic Structure of Earthbound CMEs and In situ Comparison
Comments: 27 pages, 6 figures, accepted for publication in Space Weather
Submitted: 2018-03-13, last modified: 2018-03-26
Predicting the magnetic field within an Earth-directed coronal mass ejection (CME) well before its arrival at Earth is one of the most important issues in space weather research. In this article, we compare the intrinsic flux rope type, i.e. the CME orientation and handedness during eruption, with the in situ flux rope type for 20 CME events that have been uniquely linked from Sun to Earth through heliospheric imaging. Our study shows that the intrinsic flux rope type can be estimated for CMEs originating from different source regions using a combination of indirect proxies. We find that only 20% of the events studied match strictly between the intrinsic and in situ flux rope types. The percentage rises to 55% when intermediate cases (where the orientation at the Sun and/or in situ is close to 45{\deg}) are considered as a match. We also determine the change in the flux rope tilt angle between the Sun and Earth. For the majority of the cases, the rotation is several tens of degrees, whilst 35% of the events change by more than 90{\deg}. While occasionally the intrinsic flux rope type is a good proxy for the magnetic structure impacting Earth, our study highlights the importance of capturing the CME evolution for space weather forecasting purposes. Moreover, we emphasize that determination of the intrinsic flux rope type is a crucial input for CME forecasting models.
[6]  oai:arXiv.org:1802.07965  [pdf] - 1652498
An Observationally-Constrained Model of a Flux Rope that Formed in the Solar Corona
Comments: 8 pages, 5 figures
Submitted: 2018-02-22
Coronal mass ejections (CMEs) are large-scale eruptions of plasma from the coronae of stars. Understanding the plasma processes involved in CME initiation has applications to space weather forecasting and laboratory plasma experiments. James et al. (Sol. Phys. 292, 71, 2017) used EUV observations to conclude that a magnetic flux rope formed in the solar corona above NOAA Active Region 11504 before it erupted on 14 June 2012 (SOL2012-06-14). In this work, we use data from the Solar Dynamics Observatory to model the coronal magnetic field of the active region one hour prior to eruption using a nonlinear force-free field extrapolation, and find a flux rope reaching a maximum height of 150 Mm above the photosphere. Estimations of the average twist of the strongly asymmetric extrapolated flux rope are between 1.35 and 1.88 turns, depending on the choice of axis, although the erupting structure was not observed to kink. The decay index near the apex of the axis of the extrapolated flux rope is comparable to typical critical values required for the onset of the torus instability, so we suggest that the torus instability drove the eruption.
[7]  oai:arXiv.org:1801.04608  [pdf] - 1648803
The origin, early evolution and predictability of solar eruptions
Comments: 65 pages, 8 figures, accepted by Space Science Reviews
Submitted: 2018-01-14
Coronal mass ejections (CMEs) were discovered in the early 1970s when space-borne coronagraphs revealed that eruptions of plasma are ejected from the Sun. Today, it is known that the Sun produces eruptive flares, filament eruptions, coronal mass ejections and failed eruptions; all thought to be due to a release of energy stored in the coronal magnetic field during its drastic reconfiguration. This review discusses the observations and physical mechanisms behind this eruptive activity, with a view to making an assessment of the current capability of forecasting these events for space weather risk and impact mitigation. Whilst a wealth of observations exist, and detailed models have been developed, there still exists a need to draw these approaches together. In particular more realistic models are encouraged in order to asses the full range of complexity of the solar atmosphere and the criteria for which an eruption is formed. From the observational side, a more detailed understanding of the role of photospheric flows and reconnection is needed in order to identify the evolutionary path that ultimately means a magnetic structure will erupt.
[8]  oai:arXiv.org:1712.00773  [pdf] - 1597338
Non-thermal distributions and energy transport in the solar flares
Comments: 4 pages, Next Generation Solar Physics (NGSPM) white paper. Final report at: http://hinode.nao.ac.jp/SOLAR-C/SOLAR-C/Documents/NGSPM_report_170731.pdf
Submitted: 2017-12-03
Determining the energy transport mechanisms in flares remains a central goal in solar flares physics that is still not adequately answered by the 'standard flare model'. In particular, the relative roles of particles and/or waves as transport mechanisms, the contributions of low energy protons and ions to the overall flare budget, and the limits of low energy non-thermal electron distribution are questions that still cannot be adequately reconciled with current instrumentation. In this 'White Paper' submitted in response to the call for inputs to the Next Generation Solar Physics Mission review process initiated by JAXA, NASA and ESA in 2016, we outline the open questions in this area and possible instrumentation that could provide the required observations to help answer these and other flare-related questions.
[9]  oai:arXiv.org:1712.00396  [pdf] - 1614950
Simulating the Coronal Evolution of AR 11437 using SDO/HMI Magnetograms
Comments: 18 pages, 13 figures, accepted in ApJ
Submitted: 2017-12-01
The coronal magnetic field evolution of AR 11437 is simulated by applying the magnetofrictional relaxation technique of Mackay et al. (2011). A sequence of photospheric line-of-sight magnetograms produced by SDO/HMI are used to drive the simulation and continuously evolve the coronal magnetic field of the active region through a series of non-linear force-free equilibria. The simulation is started during the first stages of the active region emergence so that its full evolution from emergence to decay can be simulated. A comparison of the simulation results with SDO/AIA observations show that many aspects of the active region's observed coronal evolution are reproduced. In particular, it shows the presence of a flux rope, which forms at the same location as sheared coronal loops in the observations. The observations show that eruptions occur on 2012 March 17 at 05:09 UT and 10:45 UT and on 2012 March 20 at 14:31 UT. The simulation reproduces the first and third eruption, with the simulated flux rope erupting roughly 1 and 10 hours before the observed ejections, respectively. A parameter study is conducted where the boundary and initial conditions are varied along with the physical effects of Ohmic diffusion, hyperdiffusion and an additional injection of helicity. When comparing the simulations, the evolution of the magnetic field, free magnetic energy, relative helicity and flux rope eruption timings do not change significantly. This indicates that the key element in reproducing the coronal evolution of AR 11437 is the use of line-of-sight magnetograms to drive the evolution of the coronal magnetic field.
[10]  oai:arXiv.org:1709.04874  [pdf] - 1588395
The 17 February 2013 sunquake in the context of the active region's magnetic field configuration
Comments: 20 pages, 16 Figures. Some figures have lower resolution than published version
Submitted: 2017-09-14
Sunquakes are created by the hydrodynamic response of the lower atmosphere to a sudden deposition of energy and momentum. In this study we investigate a sunquake that occurred in NOAA active region 11675 on 17 February 2013. Observations of the corona, chromosphere and photosphere are brought together for the first time with a non-linear force-free model of the active region's magnetic field in order to probe the magnetic environment in which the sunquake was initiated. We find that the sunquake was associated with the destabilization of a flux rope and an associated M-class GOES flare. Active region 11675 was in its emergence phase at the time of the sunquake and photospheric motions caused by the emergence heavily modified the flux rope and its associated quasi-separatrix layers, eventually triggering the flux rope's instability. The flux rope was surrounded by an extended envelope of field lines rooted in a small area at the approximate position of the sunquake. We argue that the configuration of the envelope, by interacting with the expanding flux rope, created a "magnetic lens" that may have focussed energy in one particular location the photosphere, creating the necessary conditions for the initiation of the sunquake.
[11]  oai:arXiv.org:1703.10837  [pdf] - 1582272
On-disc Observations of Flux Rope Formation Prior to its Eruption
Comments:
Submitted: 2017-03-31
Coronal mass ejections (CMEs) are one of the primary manifestations of solar activity and can drive severe space weather effects. Therefore, it is vital to work towards being able to predict their occurrence. However, many aspects of CME formation and eruption remain unclear, including whether magnetic flux ropes are present before the onset of eruption and the key mechanisms that cause CMEs to occur. In this work, the pre-eruptive coronal configuration of an active region that produced an interplanetary CME with a clear magnetic flux rope structure at 1 AU is studied. A forward-S sigmoid appears in extreme-ultraviolet (EUV) data two hours before the onset of the eruption (SOL2012-06-14), which is interpreted as a signature of a right-handed flux rope that formed prior to the eruption. Flare ribbons and EUV dimmings are used to infer the locations of the flux rope footpoints. These locations, together with observations of the global magnetic flux distribution, indicate that an interaction between newly emerged magnetic flux and pre-existing sunspot field in the days prior to the eruption may have enabled the coronal flux rope to form via tether-cutting-like reconnection. Composition analysis suggests that the flux rope had a coronal plasma composition, supporting our interpretation that the flux rope formed via magnetic reconnection in the corona. Once formed, the flux rope remained stable for 2 hours before erupting as a CME.
[12]  oai:arXiv.org:1701.08595  [pdf] - 1535160
Determining the Intrinsic CME Flux Rope Type Using Remote-sensing Solar Disk Observations
Comments: 24 pages, 7 figures, accepted for publication in Solar Physics
Submitted: 2017-01-30
A key aim in space weather research is to be able to use remote-sensing observations of the solar atmosphere to extend the lead time of predicting the geoeffectiveness of a coronal mass ejection (CME). In order to achieve this, the magnetic structure of the CME as it leaves the Sun must be known. In this article we address this issue by developing a method to determine the intrinsic flux rope type of a CME solely from solar disk observations. We use several well known proxies for the magnetic helicity sign, the axis orientation, and the axial magnetic field direction to predict the magnetic structure of the interplanetary flux rope. We present two case studies: the 2 June 2011 and the 14 June 2012 CMEs. Both of these events erupted from an active region and, despite having clear in situ counterparts, their eruption characteristics were relatively complex. The first event was associated with an active region filament that erupted in two stages, while for the other event the eruption originated from a relatively high coronal altitude and the source region did not feature the presence of a filament. Our magnetic helicity sign proxies include the analysis of magnetic tongues, soft X-ray and/or EUV sigmoids, coronal arcade skew, filament emission and absorption threads, and filament rotation. Since the inclination of the post-eruption arcades was not clear, we use the tilt of the polarity inversion line to determine the flux rope axis orientation, and coronal dimmings to determine the flux rope footpoints and, therefore, the direction of the axial magnetic field. The comparison of the estimated intrinsic flux rope structure to in situ observations at the Lagrangian point L1 indicated a good agreement with the predictions. Our results highlight the flux rope type determination techniques that are particularly useful for active region eruptions, where most geoeffective CMEs originate.
[13]  oai:arXiv.org:1606.08264  [pdf] - 1470720
Flux cancellation and the evolution of the eruptive filament of 2011 June 7
Comments: 18 pages, 7 figures. Submitted to ApJ in December 2015, accepted in June 2016
Submitted: 2016-06-27
We investigate whether flux cancellation is responsible for the formation of a very massive filament resulting in the spectacular 2011 June 7 eruption. We analyse and quantify the amount of flux cancellation that occurs in NOAA AR 11226 and its two neighbouring ARs (11227 & 11233) using line-of-sight magnetograms from the Heliospheric Magnetic Imager. During a 3.6-day period building up to the filament eruption, 1.7 x 10^21 Mx, 21% of AR 11226's maximum magnetic flux, was cancelled along the polarity inversion line (PIL) where the filament formed. If the flux cancellation continued at the same rate up until the eruption then up to 2.8 x 10^21 Mx (34% of the AR flux) may have been built into the magnetic configuration that contains the filament plasma. The large flux cancellation rate is due to an unusual motion of the positive polarity sunspot, which splits, with the largest section moving rapidly towards the PIL. This motion compresses the negative polarity and leads to the formation of an orphan penumbra where one end of the filament is rooted. Dense plasma threads above the orphan penumbra build into the filament, extending its length, and presumably injecting material into it. We conclude that the exceptionally strong flux cancellation in AR 11226 played a significant role in the formation of its unusually massive filament. In addition, the presence and coherent evolution of bald patches in the vector magnetic field along the PIL suggests that the magnetic field configuration supporting the filament material is that of a flux rope.
[14]  oai:arXiv.org:1508.07216  [pdf] - 1292298
Spectroscopic Signatures Related to a Sunquake
Comments: 39 pages, 13 figures, accepted for publication in ApJ
Submitted: 2015-08-28
The presence of flare related acoustic emission (sunquakes) in some flares represents a severe challenge to our current understanding of flare energy transport processes. We present a comparison of new spectral observations from Hinode's EUV imaging Spectrometer (EIS) and the Interface Region Imaging Spectrograph (IRIS) of the atmosphere above a sunquake, and compare them to the spectra observed in a part of the flaring region with no acoustic signature. Evidence for the sunquake is determined using both time-distance and acoustic holography methods, and we find that, unlike many previous sunquake detections, the signal is rather dispersed, but that the time-distance and 6 and 7 mHz sources converge at the same spatial location. We also see some evidence for different evolution at different frequencies, with an earlier peak at 7 mHz than at 6 mHz. Using spectroscopic measurements we find that in this location at the time of the 7 mHz peak the spectral emission is significantly more intense, shows larger velocity shifts and substantially broader profiles than in the location with no sunquake, and that there is a good correlation between blue-shifted, hot coronal, hard X-ray (HXR) and red-shifted chromospheric emission, consistent with the idea of a strong downward motion driven by rapid heating by non-thermal electrons and the formation of chromospheric shocks. Exploiting the diagnostic potential of the Mg II triplet lines, we also find evidence for a single, large temperature increase deep in the atmosphere, consistent with this scenario. The time of the 6 mHz and time-distance peak signal coincides with a secondary peak in the energy release process, but in this case we find no evidence of HXR emission in the quake location, but very broad spectral lines, strongly shifted to the red, indicating the possible presence of a significant flux of downward propagating Alfven waves.
[15]  oai:arXiv.org:1501.07397  [pdf] - 1224238
FIP Bias Evolution in a Decaying Active Region
Comments:
Submitted: 2015-01-29
Solar coronal plasma composition is typically characterized by first ionization potential (FIP) bias. Using spectra obtained by Hinode's EUV Imaging Spectrometer (EIS) instrument, we present a series of large-scale, spatially resolved composition maps of active region (AR) 11389. The composition maps show how FIP bias evolves within the decaying AR from 2012 January 4-6. Globally, FIP bias decreases throughout the AR. We analyzed areas of significant plasma composition changes within the decaying AR and found that small-scale evolution in the photospheric magnetic field is closely linked to the FIP bias evolution observed in the corona. During the AR's decay phase, small bipoles emerging within supergranular cells reconnect with the pre-existing AR field, creating a pathway along which photospheric and coronal plasmas can mix. The mixing time scales are shorter than those of plasma enrichment processes. Eruptive activity also results in shifting the FIP bias closer to photospheric in the affected areas. Finally, the FIP bias still remains dominantly coronal only in a part of the AR's high-flux density core. We conclude that in the decay phase of an AR's lifetime, the FIP bias is becoming increasingly modulated by episodes of small-scale flux emergence, i.e. decreasing the AR's overall FIP bias. Our results show that magnetic field evolution plays an important role in compositional changes during AR development, revealing a more complex relationship than expected from previous well-known Skylab results showing that FIP bias increases almost linearly with age in young ARs (Widing $\&$ Feldman, 2001, ApJ, 555, 426).
[16]  oai:arXiv.org:1412.5623  [pdf] - 1223698
Atmospheric Response to of an Active Region to new Small Flux Emergence
Comments: 20 pages, 15 figures. Accepted by the Solar Physics journal
Submitted: 2014-12-17
We investigate the atmospheric response to a small emerging flux region (EFR) that occurred in the positive polarity of Active Region 11236 on 23 \,-\ 24 June 2011. Data from the \textit{Solar Dynamics Observatory's Atmopheric Imaging Assembly} (AIA), the \textit{Helioseismic and Magnetic Imager} (HMI) and Hinode's \textit{EUV imaging spectrometer} (EIS) are used to determine the atmospheric response to new flux emerging into a pre-existing active region. Brightenings are seen forming in the upper photosphere, chromosphere, and corona over the EFR's location whilst flux cancellation is observed in the photosphere. The impact of the flux emergence is far reaching, with new large-scale coronal loops forming up to 43 Mm from the EFR and coronal upflow enhancements of approximately 10 km s$^{-1}$ on the north side of the EFR. Jets are seen forming in the chromosphere and the corona over the emerging serpentine field. This is the first time that coronal jets have been seen over the serpentine field.
[17]  oai:arXiv.org:1406.3153  [pdf] - 835456
Coronal magnetic reconnection driven by CME expansion -- the 2011 June 7 event
Comments: 12 pages, 12 figures
Submitted: 2014-06-12
Coronal mass ejections (CMEs) erupt and expand in a magnetically structured solar corona. Various indirect observational pieces of evidence have shown that the magnetic field of CMEs reconnects with surrounding magnetic fields, forming, e.g., dimming regions distant from the CME source regions. Analyzing Solar Dynamics Observatory (SDO) observations of the eruption from AR 11226 on 2011 June 7, we present the first direct evidence of coronal magnetic reconnection between the fields of two adjacent ARs during a CME. The observations are presented jointly with a data-constrained numerical simulation, demonstrating the formation/intensification of current sheets along a hyperbolic flux tube (HFT) at the interface between the CME and the neighbouring AR 11227. Reconnection resulted in the formation of new magnetic connections between the erupting magnetic structure from AR 11226 and the neighboring active region AR 11227 about 200 Mm from the eruption site. The onset of reconnection first becomes apparent in the SDO/AIA images when filament plasma, originally contained within the erupting flux rope, is re-directed towards remote areas in AR 11227, tracing the change of large-scale magnetic connectivity. The location of the coronal reconnection region becomes bright and directly observable at SDO/AIA wavelengths, owing to the presence of down-flowing cool, dense (10^{10} cm^{-3}) filament plasma in its vicinity. The high-density plasma around the reconnection region is heated to coronal temperatures, presumably by slow-mode shocks and Coulomb collisions. These results provide the first direct observational evidence that CMEs reconnect with surrounding magnetic structures, leading to a large-scale re-configuration of the coronal magnetic field.
[18]  oai:arXiv.org:1312.4388  [pdf] - 759677
Observations of flux rope formation prior to coronal mass ejections
Comments: Proc. IAU Symp. 300 "Nature of prominences and their role in space weather", in press
Submitted: 2013-12-16
Understanding the magnetic configuration of the source regions of coronal mass ejections (CMEs) is vital in order to determine the trigger and driver of these events. Observations of four CME productive active regions are presented here, which indicate that the pre-eruption magnetic configuration is that of a magnetic flux rope. The flux ropes are formed in the solar atmosphere by the process known as flux cancellation and are stable for several hours before the eruption. The observations also indicate that the magnetic structure that erupts is not the entire flux rope as initially formed, raising the question of whether the flux rope is able to undergo a partial eruption or whether it undergoes a transition in specific flux rope configuration shortly before the CME.
[19]  oai:arXiv.org:1310.0999  [pdf] - 1179698
Plasma composition in a sigmoidal anemone active region
Comments: For on-line animation, see http://www.mssl.ucl.ac.uk/~db2/fip_intensity.gif. Accepted by ApJ
Submitted: 2013-10-03
Using spectra obtained by the EIS instrument onboard Hinode, we present a detailed spatially resolved abundance map of an active region (AR)-coronal hole (CH) complex that covers an area of 359 arcsec x 485 arcsec. The abundance map provides first ionization potential (FIP) bias levels in various coronal structures within the large EIS field of view. Overall, FIP bias in the small, relatively young AR is 2-3. This modest FIP bias is a consequence of the AR age, its weak heating, and its partial reconnection with the surrounding CH. Plasma with a coronal composition is concentrated at AR loop footpoints, close to where fractionation is believed to take place in the chromosphere. In the AR, we found a moderate positive correlation of FIP bias with nonthermal velocity and magnetic flux density, both of which are also strongest at the AR loop footpoints. Pathways of slightly enhanced FIP bias are traced along some of the loops connecting opposite polarities within the AR. We interpret the traces of enhanced FIP bias along these loops to be the beginning of fractionated plasma mixing in the loops. Low FIP bias in a sigmoidal channel above the AR's main polarity inversion line where ongoing flux cancellation is taking place, provides new evidence of a bald patch magnetic topology of a sigmoid/flux rope configfiuration.
[20]  oai:arXiv.org:1307.2838  [pdf] - 691322
First observational application of a connectivity--based helicity flux density
Comments: 4 pages, 3 figures; published online in A&A 555, L6 (2013)
Submitted: 2013-07-10
Measuring the magnetic helicity distribution in the solar corona can help in understanding the trigger of solar eruptive events because magnetic helicity is believed to play a key role in solar activity due to its conservation property. A new method for computing the photospheric distribution of the helicity flux was recently developed. This method takes into account the magnetic field connectivity whereas previous methods were based on photospheric signatures only. This novel method maps the true injection of magnetic helicity in active regions. We applied this method for the first time to an observed active region, NOAA 11158, which was the source of intense flaring activity. We used high-resolution vector magnetograms from the SDO/HMI instrument to compute the photospheric flux transport velocities and to perform a nonlinear force-free magnetic field extrapolation. We determined and compared the magnetic helicity flux distribution using a purely photospheric as well as a connectivity-based method. While the new connectivity-based method confirms the mixed pattern of the helicity flux in NOAA 11158, it also reveals a different, and more correct, distribution of the helicity injection. This distribution can be important for explaining the likelihood of an eruption from the active region. The connectivity-based approach is a robust method for computing the magnetic helicity flux, which can be used to study the link between magnetic helicity and eruptivity of observed active regions.
[21]  oai:arXiv.org:1304.5805  [pdf] - 1166134
On the Seismicity of September 7, 2011 X1.8-class Flare
Comments: Proceedings of "Eclipse on the Coral Sea: Cycle 24 Ascending GONG 2012/LWS/SDO-5/SOHO-27" meeting, November 12-16, 2012, Palm Cove, Queensland
Submitted: 2013-04-21
We present results of our preliminary analysis of acoustically active X-class flare of September 7, 2011. We report two acoustic sources detected via acoustic holography and verified by finding a ridge in time-distance diagrams. We compare the directional information extracted from time-distance and acoustic holography, showing a good agreement in this case. We report that the direction where amplitude of the wave-front is the largest lies through the strong magnetic field and sunspot, suggesting that absorption of the acoustic wave power by magnetic field can be ruled out as a wave anisotropy mechanism in this case.
[22]  oai:arXiv.org:1208.4284  [pdf] - 1150803
Properties of the 15 February 2011 Flare Seismic Sources
Comments: 15 pages, 5 figures, accepted for publication by Solar Physics
Submitted: 2012-08-21
The first near-side X-class flare of the Solar Cycle 24 occurred in February 2011 and produced a very strong seismic response in the photosphere. One sunquake was reported by Kosovichev (2011) followed by the discovery of a second sunquake by Zharkov et al (2011). The flare had a two-ribbon structure and was associated with a flux rope eruption and a halo coronal mass ejection (CME) as reported in the CACTus catalogue. Following the discovery of the second sunquake and the spatial association of both sources with the locations of the feet of the erupting flux rope (Zharkov et al 2011) we present here a more detailed analysis of the observed photospheric changes in and around the seismic sources. These sunquakes are quite unusual, taking place early in the impulsive stage of the flare, with the seismic sources showing little hard X-ray (HXR) emission, and strongest X-ray emission sources located in the flare ribbons. We present a directional time--distance diagram computed for the second source, which clearly shows a ridge corresponding to the travelling acoustic wave packet and find that the quake at the second source happened about 45 seconds to one minute earlier than the first source. Using acoustic holography we report different frequency responses of the two sources. We find strong downflows at both seismic locations and a supersonic horizontal motion at the second site of acoustic wave excitation.
[23]  oai:arXiv.org:1110.2005  [pdf] - 1084753
February 15, 2011: sun-quakes produced by flux rope eruption
Comments: 15 pages, 5 figures, 1 online movie, accepted for publication in ApJL
Submitted: 2011-10-10
We present an analysis of the 15 February 2011 X-class solar flare, previously reported to produce the first sunquake in solar cycle 24 (Kosovichev 2011). Using acoustic holography, we confirm the first, and report a second, weaker, seismic source associated with this flare. We find that the two sources are located at either end of a sigmoid which indicates the presence of a flux rope. Contrary to the majority of previously reported sunquakes, the acoustic emission precedes the peak of major hard X-ray (HXR) sources by several minutes. Furthermore, the strongest hard X-ray footpoints derived from RHESSI data are found to be located away from the seismic sources in the flare ribbons. We account for these discrepancies within the context of a phenomenological model of a flux rope eruption and accompanying two-ribbon flare. We propose that the sunquakes are triggered at the footpoints of the erupting flux rope at the start of the flare impulsive phase and eruption onset, while the main hard X-ray sources appear later at the footpoints of the flare loops formed under the rising flux rope. Possible implications of this scenario for the theoretical interpretation of the forces driving sunquakes are discussed.
[24]  oai:arXiv.org:1109.4301  [pdf] - 1084244
LEMUR: Large European Module for solar Ultraviolet Research. European contribution to JAXA's Solar-C mission
Comments: 35 pages, 14 figures. To appear on Experimental Astronomy
Submitted: 2011-09-20, last modified: 2011-09-21
Understanding the solar outer atmosphere requires concerted, simultaneous solar observations from the visible to the vacuum ultraviolet (VUV) and soft X-rays, at high spatial resolution (between 0.1" and 0.3"), at high temporal resolution (on the order of 10 s, i.e., the time scale of chromospheric dynamics), with a wide temperature coverage (0.01 MK to 20 MK, from the chromosphere to the flaring corona), and the capability of measuring magnetic fields through spectropolarimetry at visible and near-infrared wavelengths. Simultaneous spectroscopic measurements sampling the entire temperature range are particularly important. These requirements are fulfilled by the Japanese Solar-C mission (Plan B), composed of a spacecraft in a geosynchronous orbit with a payload providing a significant improvement of imaging and spectropolarimetric capabilities in the UV, visible, and near-infrared with respect to what is available today and foreseen in the near future. The Large European Module for solar Ultraviolet Research (LEMUR), described in this paper, is a large VUV telescope feeding a scientific payload of high-resolution imaging spectrographs and cameras. LEMUR consists of two major components: a VUV solar telescope with a 30 cm diameter mirror and a focal length of 3.6 m, and a focal-plane package composed of VUV spectrometers covering six carefully chosen wavelength ranges between 17 and 127 nm. The LEMUR slit covers 280" on the Sun with 0.14" per pixel sampling. In addition, LEMUR is capable of measuring mass flows velocities (line shifts) down to 2 km/s or better. LEMUR has been proposed to ESA as the European contribution to the Solar C mission.
[25]  oai:arXiv.org:1105.0758  [pdf] - 1076401
On Signatures of Twisted Magnetic Flux Tube Emergence
Comments: 14 pages, 8 figures, accepted for publication in Solar Physics
Submitted: 2011-05-04
Recent studies of NOAA active region 10953, by Okamoto {\it et al.} ({\it Astrophys. J. Lett.} {\bf 673}, 215, 2008; {\it Astrophys. J.} {\bf 697}, 913, 2009), have interpreted photospheric observations of changing widths of the polarities and reversal of the horizontal magnetic field component as signatures of the emergence of a twisted flux tube within the active region and along its internal polarity inversion line (PIL). A filament is observed along the PIL and the active region is assumed to have an arcade structure. To investigate this scenario, MacTaggart and Hood ({\it Astrophys. J. Lett.} {\bf 716}, 219, 2010) constructed a dynamic flux emergence model of a twisted cylinder emerging into an overlying arcade. The photospheric signatures observed by Okamoto {\it et al.} (2008, 2009) are present in the model although their underlying physical mechanisms differ. The model also produces two additional signatures that can be verified by the observations. The first is an increase in the unsigned magnetic flux in the photosphere at either side of the PIL. The second is the behaviour of characteristic photospheric flow profiles associated with twisted flux tube emergence. We look for these two signatures in AR 10953 and find negative results for the emergence of a twisted flux tube along the PIL. Instead, we interpret the photospheric behaviour along the PIL to be indicative of photospheric magnetic cancellation driven by flows from the dominant sunspot. Although we argue against flux emergence within this particular region, the work demonstrates the important relationship between theory and observations for the successful discovery and interpretation of signatures of flux emergence.
[26]  oai:arXiv.org:1102.5296  [pdf] - 323390
Modeling the Dispersal of an Active Region: Quantifying Energy Input into the Corona
Comments: 13 Figures, 2 movies
Submitted: 2011-02-25
In this paper a new technique for modeling non-linear force-free fields directly from line of sight magnetogram observations is presented. The technique uses sequences of magnetograms directly as lower boundary conditions to drive the evolution of coronal magnetic fields between successive force-free equilibria over long periods of time. It is illustrated by applying it to MDI observations of a decaying active region, NOAA AR 8005. The active region is modeled during a 4 day period around its central meridian passage. Over this time, the dispersal of the active region is dominated by random motions due to small scale convective cells. Through studying the build up of magnetic energy in the model, it is found that such small scale motions may inject anywhere from $2.5-3 \times 10^{25}$ erg s$^{-1}$ of free magnetic energy into the coronal field. Most of this energy is stored within the center of the active region in the low corona, below 30 Mm. After 4 days the build-up of free energy is 10% that of the corresponding potential field. This energy buildup, is sufficient to explain the radiative losses at coronal temperatures within the active region. Small scale convective motions therefore play an integral part in the energy balance of the corona. This new technique has wide ranging applications with the new high resolution, high cadence observations from the SDO:HMI and SDO:AIA instruments.
[27]  oai:arXiv.org:1011.1227  [pdf] - 254018
Photospheric flux cancellation and associated flux rope formation and eruption
Comments: Astron. Astrophys., in press
Submitted: 2010-11-04
We study an evolving bipolar active region that exhibits flux cancellation at the internal polarity inversion line, the formation of a soft X-ray sigmoid along the inversion line and a coronal mass ejection. The evolution of the photospheric magnetic field is described and used to estimate how much flux is reconnected into the flux rope. About one third of the active region flux cancels at the internal polarity inversion line in the 2.5~days leading up to the eruption. In this period, the coronal structure evolves from a weakly to a highly sheared arcade and then to a sigmoid that crosses the inversion line in the inverse direction. These properties suggest that a flux rope has formed prior to the eruption. The amount of cancellation implies that up to 60% of the active region flux could be in the body of the flux rope. We point out that only part of the cancellation contributes to the flux in the rope if the arcade is only weakly sheared, as in the first part of the evolution. This reduces the estimated flux in the rope to $\sim\!30%$ or less of the active region flux. We suggest that the remaining discrepancy between our estimate and the limiting value of $\sim\!10%$ of the active region flux, obtained previously by the flux rope insertion method, results from the incomplete coherence of the flux rope, due to nonuniform cancellation along the polarity inversion line. A hot linear feature is observed in the active region which rises as part of the eruption and then likely traces out field lines close to the axis of the flux rope. The flux cancellation and changing magnetic connections at one end of this feature suggest that the flux rope reaches coherence by reconnection shortly before and early in the impulsive phase of the associated flare. The sigmoid is destroyed in the eruption but reforms within a few hours after a moderate amount of further cancellation has occurred.
[28]  oai:arXiv.org:0906.4794  [pdf] - 25679
Flux Rope Formation Preceding Coronal Mass Ejection Onset
Comments: ApJ Letters, in press
Submitted: 2009-06-26
We analyse the evolution of a sigmoidal (S shaped) active region toward eruption, which includes a coronal mass ejection (CME) but leaves part of the filament in place. The X-ray sigmoid is found to trace out three different magnetic topologies in succession: a highly sheared arcade of coronal loops in its long-lived phase, a bald-patch separatrix surface (BPSS) in the hours before the CME, and the first flare loops in its major transient intensity enhancement. The coronal evolution is driven by photospheric changes which involve the convergence and cancellation of flux elements under the sigmoid and filament. The data yield unambiguous evidence for the existence of a BPSS, and hence a flux rope, in the corona prior to the onset of the CME.
[29]  oai:arXiv.org:0904.4782  [pdf] - 315870
Temperature Tomography of a Coronal Sigmoid Supporting the Gradual Formation of a Flux Rope
Comments: 15 pages, 5 figures, Accepted for publication in ApJ Letters
Submitted: 2009-04-30
Multi-wavelength observations of a sigmoidal (S-shaped) solar coronal source by the EUV Imaging Spectrometer and the X-ray Telescope aboard the Hinode spacecraft and by the EUV Imager aboard STEREO are reported. The data reveal the coexistence of a pair of J-shaped hot arcs at temperatures T>2 MK with an S-shaped structure at somewhat lower temperatures T~1.3 MK. The middle section of the S-shaped structure runs along the polarity inversion line of the photospheric field, bridging the gap between the arcs. Flux cancellation occurs at the same location in the photosphere. The sigmoid forms in the gradual decay phase of the active region, which does not experience an eruption. These findings correspond to the expected signatures of a flux rope forming, or being augmented, gradually by a topology transformation inside a magnetic arcade. In such a transformation, the plasma on newly formed helical field lines in the outer flux shell of the rope (S-shaped in projection) is expected to enter a cooling phase once the reconnection of their parent field line pairs (double-J shaped in projection) is complete. Thus, the data support the conjecture that flux ropes can exist in the corona prior to eruptive activity.
[30]  oai:arXiv.org:astro-ph/0304092  [pdf] - 1233104
How are Emerging Flux, Flares and CMEs Related to Magnetic Polarity Imbalance in MDI Data?
Comments: 22 pages, 8 figures, Solar Physics (in press)
Submitted: 2003-04-04
In order to understand whether major flares or coronal mass ejections (CMEs) can be related to changes in the longitudinal photospheric magnetic field, we study 4 young active regions during seven days of their disc passage. This time period precludes any biases which may be introduced in studies that look at the field evolution during the short-term flare or CME period only. Data from the Michelson Doppler Imager (MDI) with a time cadence of 96 minutes are used. Corrections are made to the data to account for area foreshortening and angle between line of sight and field direction, and also the underestimation of the flux densities. We make a systematic study of the evolution of the longitudinal magnetic field, and analyze flare and CME occurrence in the magnetic evolution. We find that the majority of CMEs and flares occur during or after new flux emergence. The flux in all four active regions is observed to have deviations from polarity balance both on the long-term (solar rotation) and on the short term (few hours). The long-term imbalance is not due to linkage outside the active region; it is primarily related to the east-west distance from central meridian, with the sign of polarity closer to the limb dominating. The sequence of short term imbalances are not closely linked to CMEs and flares and no permanent imbalance remains after them. We propose that both kinds of imbalance are due to the presence of a horizontal field component (parallel to the photospheric surface) in the emerging flux.