Next generation radio telescopes, such as the Square Kilometre Array (SKA) and Next Generation Very Large Array (ngVLA), require precise microwave frequency reference signals to be transmitted over fiber links to each dish to coherently sample astronomical signals. Such telescopes employ phase stabilization systems to suppress the phase noise imparted on the reference signals by environmental perturbations on the links; however, the stabilization systems are bandwidth limited by the round-trip time of light travelling on the fiber links. A phase-locked Receiver Module (RM) is employed on each dish to suppress residual phase noise outside of the round-trip bandwidth. The SKA RM must deliver a 3.96 GHz output signal with 4 MHz of tuning range and less than 74 fs of timing jitter. We present an RM architecture to meet both requirements. Analytical modelling of the RM predicts 50 fs of output jitter when the reference signal is integrated between 1 Hz and 2.8 GHz. The proposed RM was conceived with best practice electromagnetic compatibility in mind, and to meet size, weight and power requirements for the SKA dish indexer. As the ngVLA phase stabilization system is currently based on the SKA system, this RM architecture is applicable to the ngVLA.

This paper describes the technical details and practical implementation of the Mid-Frequency Square Kilometre Array (SKA) phase synchronisation system. Over a four-year period, the system has been tested on metropolitan fibre-optic networks, on long-haul overhead fibre at the South African SKA site, and on existing telescopes in Australia to verify its functional performance. The tests have shown that the system exceed the 1-second SKA coherence loss requirement by a factor 2560, the 60-second coherence loss requirement by a factor of 239, and the 10-minute phase drift requirement by almost five orders-of-magnitude. The paper also reports on tests showing that the system can operate within specification over the all required operating conductions, including maximum fibre link distance, temperature range, temperature gradient, relative humidity, wind speed, seismic resilience, electromagnetic compliance, frequency offset, and other operational requirements.