We present two new planetary systems found around cool dwarf stars with data from the K2 mission. The first system was found in K2-239 (EPIC 248545986), char- acterized in this work as M3.0V and observed in the 14th campaign of K2. It consists of three Earth-size transiting planets with radii of 1.1, 1.0 and 1.1 R Earth, showing a compact configuration with orbital periods of 5.24, 7.78 and 10.1 days, close to 2:3:4 resonance. The second was found in K2-240 (EPIC 249801827), characterized in this work as M0.5V and observed in the 15th campaign. It consists of two transiting super-Earths with radii 2.0 and 1.8 R Earth and orbital periods of 6.03 and 20.5 days. The equilibrium temperatures of the atmospheres of these planets are estimated to be in the range of 380-600 K and the amplitudes of signals in transmission spectroscopy are estimated at ~10 ppm.

We report on the design, construction and operation of a low background x-ray detection line composed of a shielded Micromegas (micromesh gaseous structure) detector of the microbulk technique. The detector is made from radiopure materials and is placed at the focal point of a $\sim$~5 cm diameter, 1.3 m focal-length, cone-approximation Wolter I x-ray telescope (XRT) comprised of thermally-formed (or "slumped") glass substrates deposited with multilayer coatings. The system has been conceived as a technological pathfinder for the future International Axion Observatory (IAXO), as it combines two of the techniques (optic and detector) proposed in the conceptual design of the project. It is innovative for two reasons: it is the first time an x-ray optic has been designed and fabricated specifically for axion research, and the first time a Micromegas detector has been operated with an x-ray optic. The line has been installed at one end of the CERN Axion Solar Telescope (CAST) magnet and is currently looking for solar axions. The combination of the XRT and Micromegas detector provides the best signal-to-noise ratio obtained so far by any detection system of the CAST experiment with a background rate of 5.4$\times$10$^{-3}\;$counts per hour in the energy region-of-interest and signal spot area.

We explore the possibility to develop a new axion helioscope type, sensitive to the higher axion mass region favored by axion models. We propose to use a low background large volume TPC immersed in an intense magnetic field. Contrary to traditional tracking helioscopes, this detection technique takes advantage of the capability to directly detect the photons converted on the buffer gas which defines the axion mass sensitivity region, and does not require pointing the magnet to the Sun. The operation flexibility of a TPC to be used with different gas mixtures (He, Ne, Xe, etc) and pressures (from 10 mbar to 10 bar) will allow to enhance sensitivity for axion masses from few meV to several eV. We present different helioscope data taking scenarios, considering detection efficiency and axion absorption probability, and show the sensitivities reachable with this technique to be few $\times$ 10$^{-11}\,$GeV$^{-1}$ for a 5$\,$T$\,$m$^3$ scale TPC. We show that a few years program taking data with such setup would allow to probe the KSVZ axion model for axion masses above 100 meV.

Disc-winds originating from the inner parts of accretion discs are considered as the basic component of magnetically collimated outflows. The only available analytical MHD solutions to describe disc-driven jets are those characterized by the symmetry of radial self-similarity. However, radially self-similar MHD jet models, in general, have three geometrical shortcomings, (i) a singularity at the jet axis, (ii) the necessary assumption of axisymmetry, and (iii) the non-existence of an intrinsic radial scale, i.e. the jets formally extend to radial infinity. Hence, numerical simulations are necessary to extend the analytical solutions towards the axis, by solving the full three-dimensional equations of MHD and impose a termination radius at finite radial distance. We focus here on studying the effects of relaxing the (ii) assumption of axisymmetry, i.e. of performing full 3D numerical simulations of a disc-wind crossing all magnetohydrodynamic critical surfaces. We compare the results of these runs with previous axisymmetric 2.5D simulations. The structure of the flow in all simulations shows strong similarities. The 3D runs reach a steady state and stay close to axisymmetry for most of the physical quantities, except for the poloidal magnetic field and the toroidal velocity which slightly deviate from axisymmetry. The latter quantities show signs of instabilities, which, however, are confined to the region inside the fast magnetosonic separatrix surface. The forces present in the flow, both of collimating and accelerating nature, are in good agreement in both the 2.5D and the 3D runs. We conclude that the analytical solution behaves well also after relaxing the basic assumption of axisymmetry.

Analytical radially self-similar models are the best available solutions describing disk-winds but need several improvements. In a previous article, we introduced models of jets from truncated disks, i.e. evolved in time numerical simulations based on a radially self-similar MHD solution but including the effects of a finite radius of the jet-emitting disk and thus the outflow. In paper I of this series, we compared these models with available observational data varying the jet density and velocity, the mass of the protostar and the radius of the aforementioned truncation. In paper I, we assumed that the jet lies in the plane of the sky. In this paper, we investigate the effect of different inclinations of the jet. In order to compare our models with observed jet widths inferred from recent optical images taken with HST and AO, we create again emission maps in different forbidden lines and from such emission maps, we determine the jet width as the full-width half-maximum of the emission. We can reproduce the jet width of DG Tau and its variations very well and the derived inclination of 40$^\circ$ is in excellent agreement with literature values of 32--52$^\circ$. In CW Tau we overestimate the inclination in our best-fit model. In the other objects, we cannot find appropriate models which reproduce the variations of the observed jet widths, only the average jet width itself is well modeled as in paper I. We conclude that truncation -- i.e. taking into account the finite radius of the jet launching region -- is necessary to reproduce the observed jet widths and our simulations limit the possible range of truncation radii. The effects of inclination are important for modeling the intrinsic variations seen in observed jet widths. Our models can be used to infer independently the inclinations in the observed sample, however, a parameter study with a finer grid of parameters is needed.

(abridged) Significant progress has been made in the last years in the understanding of the jet formation mechanism through a combination of numerical simulations and analytical MHD models for outflows characterized by the symmetry of self-similarity. In a previous article we introduced models of truncated jets from disks, i.e. evolved in time numerical simulations based on a radially self-similar MHD solution, but including the effects of a finite radius of the jet-emitting disk and thus the outflow. These models need now to be compared with available observational data. A direct comparison of the results of combined analytical theoretical models and numerical simulations with observations has not been performed as yet. In order to compare our models with observed jet widths inferred from recent optical images taken with HST and AO observations, we use a new set of tools to create emission maps in different forbidden lines, from which we determine the jet width as the FWHM of the emission. It is shown that the untruncated analytical disk outflow solution considered here cannot fit the small jet widths inferred by observations of several jets. Various truncated disk-wind models are examined, whose extracted jet widths range from higher to lower values compared to the observations. Thus we can fit the observed range of jet widths by tuning our models. We conclude that truncation is necessary to reproduce the observed jet widths and our simulations limit the possible range of truncation radii. We infer that the truncation radius, which is the radius on the disk mid-plane where the jet-emitting disk switches to a standard disk, must be between around 0.1 up to about 1 AU in the observed sample for the considered disk-wind solution. One disk-wind simulation with an inner truncation radius at about 0.11 AU also shows potential for reproducing the observations, but a parameter study is needed.

Axisymmetric resistive MHD simulations for radially self-similar initial conditions are performed, using the NIRVANA code. The magnetic diffusivity could occur in outflows above an accretion disk, being transferred from the underlying disk into the disk corona by MHD turbulence (anomalous turbulent diffusivity), or as a result of ambipolar diffusion in partially ionized flows. We introduce, in addition to the classical magnetic Reynolds number Rm, which measures the importance of resistive effects in the induction equation, a new number Rb, which measures the importance of the resistive effects in the energy equation. We find two distinct regimes of solutions in our simulations. One is the low-resistivity regime, in which results do not differ much from ideal-MHD solutions. In the high-resistivity regime, results seem to show some periodicity in time-evolution, and depart significantly from the ideal-MHD case. Whether this departure is caused by numerical or physical reasons is of considerable interest for numerical simulations and theory of astrophysical outflows and is currently investigated.

We present self-consistent global, steady-state MHD models and synthetic optically thin synchrotron emission maps for the jet of M87. The model consist of two distinct zones: an inner relativistic outflow, which we identify with the observed jet, and an outer cold disk-wind. While the former does not self-collimate efficiently due to its high effective inertia, the latter fulfills all the conditions for efficient collimation by the magneto-centrifugal mechanism. Given the right balance between the effective inertia of the inner flow and the collimation efficiency of the outer disk wind, the relativistic flow is magnetically confined into a well collimated beam and matches the measurements of the opening angle of M87 over several orders of magnitude in spatial extent. The synthetic synchrotron maps reproduce the morphological structure of the jet of M87, i.e. center-bright profiles near the core and limb-bright profiles away from the core. At the same time, they also show a local increase of brightness at some distance along the axis associated to a recollimation shock in the MHD model. Its location coincides with the position of the optical knot HST-1. In addition our best fitting model is consistent with a number of observational constraints such as the magnetic field in the knot HST-1, and the jet-to-counterjet brightness ratio.

(Abridged) Finite radius accretion disks are a strong candidate for launching astrophysical jets from their inner parts and disk-winds are considered as the basic component of such magnetically collimated outflows. The only available analytical MHD solutions for describing disk-driven jets are those characterized by the symmetry of radial self-similarity. Radially self-similar MHD models, in general, have two geometrical shortcomings, a singularity at the jet axis and the non-existence of an intrinsic radial scale, i.e. the jets formally extend to radial infinity. Hence, numerical simulations are necessary to extend the analytical solutions towards the axis and impose a physical boundary at finite radial distance. We focus here on studying the effects of imposing an outer radius of the underlying accreting disk (and thus also of the outflow) on the topology, structure and variability of a radially self-similar analytical MHD solution. The initial condition consists of a hybrid of an unchanged and a scaled-down analytical solution, one for the jet and the other for its environment. In all studied cases, we find at the end steady two-component solutions.

Stellar jets are normally constituted by chains of knots with some periodicity in their spatial distribution, corresponding to a variability of order of several years in the ejection from the protostar/disk system. A widely accepted theory for the presence of knots is related to the generation of internal working surfaces due to variations in the jet ejection velocity. In this paper we study the effect of variations in the inner disk-wind radius on the jet ejection velocity. We show that a small variation in the inner disk-wind radius produce a variation in the jet velocity large enough to generate the observed knots. We also show that the variation in the inner radius may be related to a variation of the stellar magnetic field.

Numerical simulations with self-similar initial and boundary conditions provide a link between theoretical and numerical investigations of jet dynamics. We perform axisymmetric resistive magnetohydrodynamic (MHD) simulations for a generalised solution of the Blandford & Payne type, and compare them with the corresponding analytical and numerical ideal-MHD solutions. We disentangle the effects of the numerical and physical diffusivity. The latter could occur in outflows above an accretion disk, being transferred from the underlying disk into the disk corona by MHD turbulence (anomalous turbulent diffusivity), or as a result of ambipolar diffusion in partially ionized flows. We conclude that while the classical magnetic Reynolds number $R_{\rm m}$ measures the importance of resistive effects in the induction equation, a new introduced number, $\rbeta=(\beta/2)R_{\rm m}$ with $\beta$ the plasma beta, measures the importance of the resistive effects in the energy equation. Thus, in magnetised jets with $\beta<2$, when $\rbeta \la 1$ resistive effects are non-negligible and affect mostly the energy equation. The presented simulations indeed show that for a range of magnetic diffusivities corresponding to $\rbeta \ga 1$ the flow remains close to the ideal-MHD self-similar solution.

We present a self-consistent MHD model for the jet of M87. The model consist of two distinct zones: an inner relativistic outflow, which we identify with the observed jet, and an outer cold disk-wind. While the former does not self-collimate efficiently due to its high effective inertia, the latter fulfills all the conditions for efficient collimation by the magneto-centrifugal mechanism. Given the right balance between the effective inertia of the inner flow and the collimation efficiency of the outer disk wind, the relativistic flow is magnetically confined into a well collimated beam for a wide range of parameters and matches the measurements of the opening angle of M87 over several orders of magnitude in spatial extent. In the second part of this work, we present synthetic synchrotron emission maps for our MHD models. In principle the two-zone model can reproduce the morphological structure seen in radio observations, as central-peaked profiles across the jet close the the source, limb-bright further down the jet, and a bright knot close to the position of HST-1. However it is difficult to reconcile all features into a single set of parameters.

We report on a densely time sampled polarimetric flux density monitoring of the BL Lac object S5 0716+71 at 86 GHz and 229 GHz with the IRAM 30 m telescope within a coordinated broad spectral band campaign, centred around an INTEGRAL observation during November 10 to 16, 2003. Our aim was to search for signatures of inverse-Compton "catastrophes". At 86 GHz, making use of a new calibration strategy, we reach a relative rms accuracy of the flux density measurements of 1.2%. At this frequency, S5 0716+71 showed no intra-day variability, but showed remarkable inter-day variability with a flux density increase of 34% during the first four observing days, which can not be explained by source extrinsic causes. The 86 GHz linear polarization fraction of S5 0716+71 was unusually large 15.0+-1.8%. Inter-day variability in linear polarization at 86 GHz, with significance level >~95%; sigma_P/<P>=15% and sigma_chi=6 deg., was also observed. From the emission variations at the synchrotron turnover frequency (~86 GHz) we compute an apparent brightness temperature T_B,app>1.4x10^14K at a redshift of 0.3, which exceeds by two orders of magnitude the inverse-Compton limit. A relativistic correction for T_B,app with a Doppler factor delta > 7.8 brings the observed brightness temperature down to the inverse Compton limit. A more accurate lower limit of delta > 14.0, is obtained from the comparison of the 86 GHz synchrotron flux density and the upper limits for the synchrotron self-Compton flux density obtained from the INTEGRAL observations. The relativistic beaming of the emission by this high Doppler factor explains the non-detection of "catastrophic" inverse-Compton avalanches by INTEGRAL.

Recent gamma-ray observations of the blazar 1ES 1101-232 (redshift z=0.186) reveal that the unabsorbed TeV spectrum is hard, with spectral index $\alpha \lesssim 0.5$ [$F(\nu) \propto \nu^{-\alpha}$]. We show that simple one-zone synchrotron self-Compton model can explain such hard spectra if we assume a power law energy distribution of the emitting electrons with a relatively high minimum energy. In this case the intrinsic TeV spectrum can be as hard as $F(\nu)\propto \nu^{1/3}$, while the predicted X-ray spectrum can still be much softer. The observations of 1ES 1101-232 can therefore be reconciled with relatively high intensities of the infrared background, even if some extreme background levels can indeed be excluded. We show that the other TeV sources (Mrk 421, Mrk 501 and PKS 2155-304) can be interpreted in the same framework, with a somewhat larger minimum energy.

Some intra-day variable, compact extra-galactic radio sources show brightness temperatures severely exceeding 10^{12} K, the limit set by catastrophic inverse-Compton (IC) cooling in sources of incoherent synchrotron radiation. The violation of the IC limit, possible under non-stationary conditions, would lead to IC avalanches in the soft-gamma-ray energy band during transient periods. For the first time, broadband signatures of possible IC catastrophes were searched for in S5 0716+71. A multifrequency observing campaign targetting S5 0716+71 was carried out in November 2003 under the framework of the European Network for the Investigation of Galactic nuclei through Multifrequency Analysis (ENIGMA) together with a campaign by the Whole Earth Blazar Telescope (WEBT), involving a pointing by the soft-gamma-ray satellite INTEGRAL, optical, near-infrared, sub-millimeter, millimeter, radio, and Very Long Baseline Array (VLBA) monitoring. S5 0716+71 was very bright at radio frequencies and in a rather faint optical state during the INTEGRAL pointing; significant inter-day and low intra-day variability was recorded in the radio regime, while typical fast variability features were observed in the optical band. No correlation was found between the radio and optical emission. The source was not detected by INTEGRAL, neither by the X-ray monitor JEM-X nor by the gamma-ray imager ISGRI, but upper limits to the source emission in the 3-200 keV energy band were estimated. A brightness temperature Tb>2.1x10^{14} K was inferred from the radio variability, but no corresponding signatures of IC avalanches were recorded at higher energies. The absence of IC-catastrophe signatures provides either a lower limit delta>8 to the Doppler factor affecting the radio emission or strong constraints for modelling of the Compton catastrophes in S5 0716+71.

We propose a new approximation for the cyclo-synchrotron emissivity of a single electron. In the second part of this work, we discuss a simple application for our approximation, and investigate the heating of electrons through the self-absorption process. Finally, we investigate the self-absorbed part of the spectrum produced by a power-law population of electrons. In comparison to earlier approximations, our formula provides a few significant advantages. Integration of the emissivity over the whole frequency range, starting from the proper minimal emitting frequency, gives the correct cooling rate for any energy particle. Further, the spectrum of the emission is well approximated over the whole frequency range, even for relatively low particle energies (beta << 0.1), where most of the power is emitted in the first harmonic. In order to test our continuous approximation, we compare it with a recently derived approximation of the first ten harmonics. Finally, our formula connects relatively smooth to the synchrotron emission at beta=0.9. We show that the self-absorption is a very efficient heating mechanism for low energy particles, independent of the shape of the particle distribution responsible for the self-absorbed synchrotron emission. We find that the energy gains for low energy particles are always higher than energy losses by cyclo-synchrotron emission. We show also that the spectral index of the self-absorbed part of the spectrum at very low frequencies differs significantly from the well known standard relation I(nu) ~ nu^(5/2).

We perform a numerical simulation of magnetohydrodynamic radially self-similar jets, whose prototype is the Blandford & Payne analytical example. The reached final steady state is valid close to the rotation axis and also at large distances above the disk where the classical analytical model fails to provide physically acceptable solutions. The outflow starts with a sub-slow magnetosonic speed which subsequently crosses all relevant MHD critical points and corresponding magnetosonic separatrix surfaces. The characteristics are plotted together with the Mach cones and the super-fast magnetosonic outflow satisfies MHD causality. The final solution remains close enough to the analytical one which is thus shown to be topologically stable and robust for various boundary conditions.

We apply a two-zone MHD model to the jet of M87. The model consists of an inner relativistic outflow, which is surrounded by a non-relativistic outer disk-wind. The outer disk-wind collimates very well through magnetic self-collimation and confines the inner relativistic jet into a narrow region around the rotation axis. Further, we show by example, that such models reproduce very accurately the observed opening angle of the M87 jet over a large range from the kiloparsec scale down to the sub-parsec scale.

We present two numerical simulations of an accretion flow from a rotating torus onto a compact object with and without a solid surface -- representing a neutron star and a black hole -- and investigate its influence on the process of jet formation. We report the emergence of an additional ejection component, launched by thermal pressure inside a boundary layer (BL) around the neutron star and examine its structure. Finally, we suggest improvements for future models.

We consider time-dependent models for rotating accretion flows onto black holes, where a transition takes place from an outer cooling-dominated disc to a radiatively inefficient flow in the inner region. In order to allow for a transition of this type we solve the energy equation, both, for the gas and for the radiation field, including a radiative cooling flux and a turbulent convective heat flux directed along the negative entropy gradient. The transition region is found to be highly variable, and a corresponding variation expected for the associated total luminosity. In particular, rapid oscillations of the transition radius are present on a timescale comparable with the local Keplerian rotation time. These oscillations are accompanied by a quasi-periodic modulation of the mass flux at the outer edge of the advection-dominated accretion flow (ADAF). We speculate about the relevance for the high-frequency QPO phenomenon.