The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

We describe the layout and unique features of the focal plane system for MIRI. We begin with the detector array and its readout integrated circuit (combining the amplifier unit cells and the multiplexer), the electronics, and the steps by which the data collection is controlled and the output signals are digitized and delivered to the JWST spacecraft electronics system. We then discuss the operation of this MIRI data system, including detector readout patterns, operation of subarrays, and data formats. Finally, we summarize the performance of the system, including remaining anomalies that need to be corrected in the data pipeline.

We describe the operations concept and data reduction plan for the Mid- Infrared Instrument (MIRI) for the James Webb Space Telescope (JWST). The overall JWST operations concept is to use Observation Templates (OTs) to provide a straightforward and intuitive way for users to specify observations. MIRI has four OTs that correspond to the four observing modes: 1.) Imaging, 2.) Coronagraphy, 3.) Low Resolution Spectroscopy, and 4.) Medium Resolution Spectroscopy. We outline the user choices and expansion of these choices into detailed instrument operations. The data reduction plans for MIRI are split into three stages, where the specificity of the reduction steps to the observation type increases with stage. The reduction starts with integration ramps: stage 1 yields uncalibrated slope images; stage 2 calibrates the slope images; and then stage 3 combines multiple calibrated slope images into high level data products (e.g. mosaics, spectral cubes, and extracted source information). Finally, we give examples of the data and data products that will be derived from each of the four different OTs.