As astronomical observations from space benefit from improved sensitivity, the effectiveness of scientific programs is becoming limited by systematics that often originate in poorly understood image sensor behavior. Traditional, bottom-up detector characterization methods provide one way to model underlying detector physics, and generate ever more faithful numerical simulations, but this approach is vulnerable to preconceptions and over-simplification. The alternative top-down approach is laboratory emulation, which enables observation, calibration, and analysis scenarios to be tested without relying on a complete understanding of the underlying physics. This complements detector characterization and simulation efforts by testing their validity. We describe a laboratory facility and experimental testbed that supports the emulation of a wide range of mission concepts such as gravitational weak lensing measurements by WFIRST and high precision spectrophotometry of transiting exoplanets by JWST. An Offner relay projects readily customizable "scenes" (e.g. stars, galaxies, spectra) with very low optical aberration over the full area of a typical optical or near infrared image sensor. f/8 and slower focal ratios may be selected, spanning those of most proposed space missions and approximating the point spread function (PSF) size of seeing limited ground based surveys. Diffraction limited PSFs are projected over a wide field of view and wavelength range to deliver highly predictable image patterns down to sub-pixel scales with stable intensity and fine motion control. The testbed enables realistic validation of detector performance on science-like images, which aids mission design and survey strategy, as well as targeted investigations of various detector effects.

A number of exciting concepts are under development for Flagship, Probe class, Explorer class, and Suborbital class NASA missions in the ultraviolet/optical spectral ranges. These missions will depend on high performance silicon detector arrays being delivered affordably and in high numbers. In a focused effort we have advanced delta-doping technology to high throughput and high yield wafer-scale processing, encompassing a multitude of state-of-the-art silicon-based detector formats and designs. As part of this technology advancement and in preparation for upcoming missions, we have embarked on a number of field observations, instrument integrations, and independent evaluations of delta-doped arrays. In this paper, we present recent data and innovations from the Advanced Detectors and Systems program at JPL, including two-dimensional doping technology; our end-to-end post-fabrication processing of high performance UV/Optical/NIR arrays; and advanced coatings for detectors and optical elements. Additionally, we present examples of past, in-progress, and planned observations and deployments of delta-doped arrays.

We report on multilayer high efficiency antireflection coating (ARC) design and development for use at UV wavelengths on CCDs and other Si-based detectors. We have previously demonstrated a set of single-layer coatings, which achieve >50% quantum efficiency (QE) in four bands from 130 to 300 nm. We now present multilayer coating designs that significantly outperform our previous work between 195 and 215 nm. Using up to 11 layers, we present several model designs to reach QE above 80%. We also demonstrate the successful performance of 5 and 11 layer ARCs on silicon and fused silica substrates. Finally, we present a five-layer coat- ing deposited onto a thinned, delta-doped CCD and demonstrate external QE greater than 60% between 202 and 208 nm, with a peak of 67.6% at 206 nm.

Extremely accurate shape measurements of galaxy images are needed to probe dark energy properties with weak gravitational lensing surveys. To increase survey area with a fixed observing time and pixel count, images from surveys such as the Wide Field Infrared Survey Telescope (WFIRST) or Euclid will necessarily be undersampled and therefore distorted by aliasing. Oversampled, unaliased images can be obtained by combining multiple, dithered exposures of the same source with a suitable reconstruction algorithm. Any such reconstruction must minimally distort the reconstructed images for weak lensing analyses to be unbiased. In this paper, we use the IMage COMbination (IMCOM) algorithm of Rowe, Hirata, and Rhodes to investigate the effect of image combination on shape measurements (size and ellipticity). We simulate dithered images of sources with varying amounts of ellipticity and undersampling, reconstruct oversampled output images from them using IMCOM, and measure shape distortions in the output. Our simulations show that IMCOM creates no significant distortions when the relative offsets between dithered images are precisely known. Distortions increase with the uncertainty in those offsets but become problematic only with relatively poor astrometric precision. E.g. for images similar to those from the Astrophysics Focused Telescope Asset (AFTA) implementation of WFIRST, combining eight undersampled images (sampling ratio Q=1) with highly pessimistic uncertainty in astrometric registration (\sigma_d~10^{-3} pixels) yields an RMS shear error of O(10^{-4}). Our analysis pipeline is adapted from that of the Precision Projector Laboratory -- a joint project between NASA Jet Propulsion Laboratory and Caltech which characterizes image sensors using laboratory emulations of astronomical data.

Weak gravitational lensing observations are a key science driver for the NASA Wide Field Infrared Survey Telescope (WFIRST). To validate the performance of the WFIRST infrared detectors, we have performed a laboratory emulation of weak gravitational lensing measurements. Our experiments used a custom precision projector system to image a target mask composed of a grid of pinholes, emulating stellar point sources, onto a 1.7 micron cut-off Teledyne HgCdTe/H2RG detector. We used a 880nm LED illumination source and f/22 pupil stop to produce undersampled point spread functions similar to those expected from WFIRST. We also emulated the WFIRST image reconstruction strategy, using the IMage COMbination (IMCOM) algorithm to derive oversampled images from dithered, undersampled input images. We created shear maps for this data and computed shear correlation functions to mimic a real weak lensing analysis. After removing only 2nd order polynomial fits to the shear maps, we found that the correlation functions could be reduced to O(10^-6). This places a conservative upper limit on the detector-induced bias to the correlation function (under our test conditions). This bias is two orders of magnitude lower than the expected weak lensing signal. Restricted to scales relevant to dark energy analyses (sky separations > 0.5 arcmin), the bias is O(10^-7): comparable to the requirement for future weak lensing missions to avoid biasing cosmological parameter estimates. Our experiment will need to be upgraded and repeated under different configurations to fully characterize the shape measurement performance of WFIRST IR detectors.

We present integral-field spectroscopy of 27 galaxies in the Coma cluster observed with the Oxford SWIFT spectrograph, exploring the kinematic morphology-density relationship in a cluster environment richer and denser than any in the ATLAS3D survey. Our new data enables comparison of the kinematic morphology relation in three very different clusters (Virgo, Coma and Abell 1689) as well as to the field/group environment. The Coma sample was selected to match the parent luminosity and ellipticity distributions of the early-type population within a radius 15' (0.43 Mpc) of the cluster centre, and is limited to r' = 16 mag (equivalent to M_K = -21.5 mag), sampling one third of that population. From analysis of the lambda-ellipticity diagram, we find 15+-6% of early-type galaxies are slow rotators; this is identical to the fraction found in the field and the average fraction in the Virgo cluster, based on the ATLAS3D data. It is also identical to the average fraction found recently in Abell 1689 by D'Eugenio et al.. Thus it appears that the average slow rotator fraction of early type galaxies remains remarkably constant across many different environments, spanning five orders of magnitude in galaxy number density. However, within each cluster the slow rotators are generally found in regions of higher projected density, possibly as a result of mass segregation by dynamical friction. These results provide firm constraints on the mechanisms that produce early-type galaxies: they must maintain a fixed ratio between the number of fast rotators and slow rotators while also allowing the total early-type fraction to increase in clusters relative to the field. A complete survey of Coma, sampling hundreds rather than tens of galaxies, could probe a more representative volume of Coma and provide significantly stronger constraints, particularly on how the slow rotator fraction varies at larger radii.

The `Eagle' galaxy at a redshift of 0.77 is studied with the Oxford Short Wavelength Integral Field Spectrograph (SWIFT) and multi-wavelength data from the All-wavelength Extended Groth strip International Survey (AEGIS). It was chosen from AEGIS because of the bright and extended emission in its slit spectrum. Three dimensional kinematic maps of the Eagle reveal a gradient in velocity dispersion which spans 35-75 +/- 10 km/s and a rotation velocity of 25 +/- 5 km/s uncorrected for inclination. Hubble Space Telescope images suggest it is close to face-on. In comparison with galaxies from AEGIS at similar redshifts, the Eagle is extremely bright and blue in the rest-frame optical, highly star-forming, dominated by unobscured star-formation, and has a low metallicity for its size. This is consistent with its selection. The Eagle is likely undergoing a major merger and is caught in the early stage of a star-burst when it has not yet experienced metal enrichment or formed the mass of dust typically found in star-forming galaxies.

We present observations of Arp 147, a galaxy system comprising a collisionally-created ring galaxy and an early-type galaxy, using the Oxford SWIFT integral field spectrograph (IFS) at the 200-inch Hale telescope. We derive spatially resolved kinematics from the IFS data and use these to study the interaction between the two galaxies. We find the edge-to-edge expansion velocity of the ring is 225 +/- 8 km/s, implying an upper limit on the timescale for the collision of 50 Myrs. We also calculate that the angle of impact for the collision is between 33 degrees-54 degrees, where 0 degrees would imply a perpendicular collision. The ring galaxy is strongly star-forming with the star formation likely to have been triggered by the collision between the two galaxies. We measure some key physical parameters in an integrated and spatially resolved manner for the ring galaxy. Using observed B-I colours and the H-alpha equivalent widths, we conclude that two stellar components (a young and an old population) are required to simultaneously match both observed quantities. We constrain the age range, light and mass fractions of the young star formation in the ring, finding a modest age range, a light fraction of less than a third, and a negligible (<1%) mass fraction. We postulate that the redder colours observed in the SE corner of the ring galaxy could correspond to the nuclear bulge of the original disk galaxy from which the ring was created, consistent with the stellar mass in the SE quadrant being 30-50% of the total. The ring appears to have been a typical disk galaxy prior to the encounter. The ring shows electron densities consistent with typical values for star-forming HII regions. The eastern half of the ring exhibits a metallicity a factor of ~2 higher than the western half. The ionisation parameter, measured across the ring, roughly follows the previously observed trend with metallicity.