Normalized to: González-Avilés, J.
[1]
oai:arXiv.org:2005.13647 [pdf] - 2103500
Spicule jets in the solar atmosphere modeled with resistive MHD and
thermal conduction
Submitted: 2020-05-27
Using numerical simulations, we study the effects of magnetic resistivity and
thermal conductivity in the dynamics and properties of solar jets with
characteristics of Type II spicules and cool coronal jets. The dynamic
evolution of the jets is governed by the resistive MHD equations with thermal
conduction along the magnetic field lines on a 2.5D slice. The magnetic field
configuration consists of two symmetric neighboring loops with opposite
polarity, used to support reconnection and followed by the plasma jet
formation. In total 10 simulations were carried out with different values of
resistivity and thermal conductivity, that produce jets with different
morphological and thermal properties we quantify. We find that an increase in
magnetic resistivity does not produce significant effects on the morphology,
velocity and temperature of the jets. However, thermal conductivity affects
both temperature and morphology of the jets. In particular, thermal
conductivity causes jets to reach greater heights and increases the temperature
of the jet-apex. Also, heat flux maps indicate the jet-apex and corona
interchange energy more efficiently than the body of the jet. These results
could potentially open a new avenue for plasma diagnostics in the Sun's
atmosphere.
[2]
oai:arXiv.org:1808.07817 [pdf] - 1841340
CAFE-PakalMPI: a new model to study the solar chromosphere in the NLTE
approximation
Submitted: 2018-08-23, last modified: 2019-03-04
We present a new numerical model called CAFE-PakalMPI with the capability to
solve the equations of classical magnetohydrodynamic (MHD) and to obtain the
multispecies whose ionization states are calculated through statistical
equilibrium, using the approximation of non-local thermodynamic equilibrium
(NLTE) in three dimensions with the multiprocessor environment. For this, we
couple the Newtonian CAFE MHD code introduced in Gonz\'alez-Avil\'es et al.
(2015) with PakalMPI presented in De la Luz et al. (2010). In this model,
Newtonian CAFE solves the equations of ideal MHD under the effects of magnetic
resistivity and heat transfer considering a fully ionized plasma. On the other
hand, PakalMPI calculates the density of ionization states using the NLTE
approximation for Hydrogen, electronic densities and H-, the other species are
computed by the classical local thermodynamic equilibrium (LTE) approximation.
The main purpose of the model focuses on the analysis of solar phenomena within
the chromospheric region. As an application of the model, we study the
stability of the C7 equilibrium atmospheric model with a constant magnetic
field in a 3D environment. According to the results of the test, the C7 model
remains stable in the low chromosphere, while in the range $z\in$[1.5,2.1] Mm
we can observe the propagation of a wave produced by the changes in the
ionization rate of H.
[3]
oai:arXiv.org:1807.04224 [pdf] - 2103347
Analysis of 3D plasma motions in a chromospheric jet formed due to
magnetic reconnection
Submitted: 2018-07-11, last modified: 2018-10-04
Within the framework of resistive MHD, implementing the C7 equilibrium
atmosphere model and a 3D potential magnetic field realistic configuration, we
simulate the formation of a plasm jet with the morphology, upward velocity up
to 130 km/s and timescale formation between 60 and 90 s after beginning of
simulation, similar to those expected for Type II spicules. Initial results of
this simulation were published in Paper (e.g., Gonz\'alez-Avil\'es et al. 2018)
and present paper is devoted to the analysis of transverse displacements and
rotational type motion of the jet. Our results suggest that 3D magnetic
reconnection may be responsible for the formation of the jet in Paper
(Gonz\'alez-Avil\'es et al. 2018). In this paper, by calculating times series
of the velocity components $v_x$ and $v_y$ in different points near to the jet
for various heights we find transverse oscillations in agreement with spicule
observations. We also obtain a time-distance plot of the temperature in a
cross-cut at the plane $x=$0.1 Mm and find significant transverse displacements
of the jet. By analyzing temperature isosurfaces of $10^{4}$ K with the
distribution of $v_x$, we find that if the line-of-sight (LOS) is approximately
perpendicular to the jet axis then there is both motion towards and away from
the observer across the width of the jet. This red-blue shift pattern of the
jet is caused by rotational motion, initially clockwise and anti-clockwise
afterwards, which could be interpreted as torsional motion. From a nearly
vertical perspective of the jet the LOS velocity component shows a central
blue-shift region surrounded by red-shifted plasma.
[4]
oai:arXiv.org:1809.00587 [pdf] - 1795769
Flows and magnetic field structures in reconnection regions of
simulations of the solar atmosphere: do flux pile-up models work?
Submitted: 2018-09-03
We study the process of magnetic field annihilation and reconnection in
simulations of magnetised solar photosphere and chromosphere with magnetic
fields of opposite polarities and constant numerical resistivity. Exact
analytical solutions for reconnective annihilations are used to interpret the
features of magnetic reconnection in simulations of flux cancellation in the
solar atmosphere. We use MURaM high-resolution photospheric radiative
magneto-convection simulations to demonstrate the presence of magnetic field
reconnection consistent with the magnetic flux pile-up models. Also, a
simulated data-driven chromospheric magneto-hydrodynamic simulation is used to
demonstrate magnetic field and flow structures, which are similar to the ones
theoretically predicted. Both simulations demonstrate flow and magnetic field
structures roughly consistent with accelerated reconnection with magnetic flux
pile-up. The presence of standard Sweet-Parker type reconnection is also
demonstrated in stronger photospheric magnetic fields.
[5]
oai:arXiv.org:1709.05066 [pdf] - 1661213
I. Jet Formation and Evolution due to 3D Magnetic Reconnection
Submitted: 2017-09-15, last modified: 2018-02-27
Using simulated data-driven three-dimensional resistive MHD simulations of
the solar atmosphere, we show that magnetic reconnection can be responsible of
the formation of jets with characteristic of Type II spicules. For this, we
numerically model the photosphere-corona region using the C7 equilibrium
atmosphere model. The initial magnetic configuration is a 3D potential magnetic
field, extrapolated up to the solar corona region from a dynamic realistic
simulation of solar photospheric magnetoconvection model which is mimicking
quiet-Sun. In this case we consider a uniform and constant value of the
magnetic resistivity of $12.56 ~\Omega~{\rm m}$. We have found that formation
of the jets depends on the Lorentz force, which helps to accelerate the plasma
upwards. Analyzing various properties of the jet dynamics, we found that the
jet structure shows Doppler shift near to regions with high vorticity. The
morphology, upward velocity, covering a range up to 100 $\rm km$ $\rm s^{-1}$,
and life-time of the estructure, bigger than 100 ${\rm s}$, are similar to
those expected for Type II spicules.
[6]
oai:arXiv.org:1609.09422 [pdf] - 1580299
Jet formation in solar atmosphere due to magnetic reconnection
Submitted: 2016-09-29
Using numerical simulations, we show that jets with features of type II
spicules and cold coronal jets corresponding to temperatures $10^{4}$ K can be
formed due to magnetic reconnection in a scenario in presence of magnetic
resistivity. For this we model the low chromosphere-corona region using the C7
equilibrium solar atmosphere model and assuming Resistive MHD rules the
dynamics of the plasma. The magnetic filed configurations we analyze correspond
to two neighboring loops with opposite polarity. The separation of the loops'
feet determines the thickness of a current sheet that triggers a magnetic
reconnection process, and the further formation of a high speed and sharp
structure. We analyze the cases where the magnetic filed strength of the two
loops is equal and different. In the first case, with a symmetric configuration
the spicules raise vertically whereas in an asymmetric configuration the
structure shows an inclination. With a number of simulations carried out under
a 2.5D approach, we explore various properties of excited jets, namely, the
morphology, inclination and velocity. The parameter space involves magnetic
field strength between 20 and 40 G, and the resistivity is assumed to be
uniform with a constant value of the order $10^{-2}\Omega\cdot m$