sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Glindemann, A.

Normalized to: Glindemann, A.

14 article(s) in total. 239 co-authors, from 1 to 6 common article(s). Median position in authors list is 4,0.

[1]  oai:arXiv.org:1908.03401  [pdf] - 1979669
Lunar occultations with Aqueye+ and Iqueye
Comments: 10 pages, 5 figures, accepted for publication in The Astronomical Journal
Submitted: 2019-08-09
We report the first-time use of the Aqueye+ and Iqueye instruments to record lunar occultation events. High-time resolution recordings in different filters have been acquired for several occultations taken from January 2016 through January 2018 with Aqueye+ at the Copernicus telescope and Iqueye at the Galileo telescope in Asiago, Italy. Light curves with different time bins were calculated in post-processing and analyzed using a least-square model-dependent method. A total of nine occultation light curves were recorded, including one star for which we could measure for the first time the size of the chromosphere ($\mu$ Psc) and one binary star for which discrepant previous determinations existed in the literature (SAO 92922). A disappearance of Alf Tau shows an angular diameter in good agreement with literature values. The other stars were found to be unresolved, at the milliarcsecond level. We discuss the unique properties of Aqueye+ and Iqueye for this kind of observations, namely the simultaneous measurement in up to four different filters thanks to pupil splitting, and the unprecedented time resolution well exceeding the microsecond level. This latter makes Aqueye+ and Iqueye suitable to observe not just occultations by the Moon, but also much faster events such as e.g. occultations by artificial screens in low orbits. We provide an outlook of future possible observations in this context.
[2]  oai:arXiv.org:1807.05089  [pdf] - 1715413
ERIS: revitalising an adaptive optics instrument for the VLT
Comments: 12 pages, Proc SPIE 10702 "Ground-Based and Airborne Instrumentation for Astronomy VII"
Submitted: 2018-07-13
ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel.
[3]  oai:arXiv.org:1608.02350  [pdf] - 1531216
An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status
Comments: SPIE Astronomical Telescopes and Instrumentation conference, June 2016, 11 pages, 6 Figures
Submitted: 2016-08-08
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.
[4]  oai:arXiv.org:1607.05575  [pdf] - 1439956
Increasing the sensitivity of a Shack-Hartmann sensor
Comments: 6 pages, 12 figures, Canterbury conference on wavefront sensing and its applications, Canterbury, England, 1999
Submitted: 2016-07-19
The Max-Planck institutes for astronomy (MPIA) and for extraterrestrial physics (MPE) run an adaptive optics (AO) system with a laser guide star at the 3.5 m telescope on Calar Alto, Spain. This system, called ALFA, produces now scientific results and works ex- cellent with natural guide stars (NGS) as faint as 13th magnitude in R-band. The ultimate goal however is to achieve similar performances with the laser guide star (LGS) which is faint and extended. We introduce the Shack-Hartmann wavefront sensor implemented in ALFA and present our efforts in increasing its sensitivity by using advanced centroiding and wavefront reconstruction algorithms.
[5]  oai:arXiv.org:1407.2785  [pdf] - 1215584
VLTI status update: a decade of operations and beyond
Comments: 10 pages, 7 figures, Proceedings of the SPIE, 9146-19
Submitted: 2014-07-10
We present the latest update of the European Southern Observatory's Very Large Telescope interferometer (VLTI). The operations of VLTI have greatly improved in the past years: reduction of the execution time; better offering of telescopes configurations; improvements on AMBER limiting magnitudes; study of polarization effects and control for single mode fibres; fringe tracking real time data, etc. We present some of these improvements and also quantify the operational improvements using a performance metric. We take the opportunity of the first decade of operations to reflect on the VLTI community which is analyzed quantitatively and qualitatively. Finally, we present briefly the preparatory work for the arrival of the second generation instruments GRAVITY and MATISSE.
[6]  oai:arXiv.org:0805.4408  [pdf] - 13031
First VLTI infrared spectro-interferometry on GCIRS 7 - Characterizing the prime reference source for Galactic center observations at highest angular resolution
Comments: 6 pages, 2 figures, accepted for publication in A&A
Submitted: 2008-05-28
Investigating the environment of the massive black hole SgrA* at the center of the Galaxy requires the highest angular resolution available to avoid source confusion and to study the physical properties of the individual objects. GCIRS7 has been used as wavefront and astrometric reference. Our studies investigate, for the first time, its properties at 2&10um using VLTI/AMBER and MIDI. We aim at analyzing the suitability of IRS7 as an IF-phase-reference for the upcoming generation of dual-field facilities at optical interferometers. We observed with (R~30) and 50m (proj.) baseline, resulting in 9 and 45mas resolution for NIR and MIR, resp. The first K-band fringe detection of a GC star suggests that IRS7 could be marginally resolved at 2um, which would imply that the photosphere of the supergiant is enshrouded by a molecular and dusty envelope. At 10um, IRS7 is strongly resolved with a visibility of approximately 0.2. The MIR is dominated by moderately warm (200 K), extended dust, mostly distributed outside of a radius of about 120 AU (15 mas) around the star. A deep 9.8-silicate absorption in excess of the usual extinction law with respect to the NIR extinction has been found. This confirms recent findings of a relatively enhanced, interstellar 9.8-silicate absorption with respect to the NIR extinction towards another star in the central arcsec, suggesting an unusual dust composition in that region. Our VLTI observations show that interferometric NIR phase-referencing experiments with mas resolution using IRS7 as phase-reference appear to be feasible, but more such studies are required to definitely characterize the close environment around this star. We demonstrate that interferometry is required to resolve the innermost environment of stars at the Galactic center.
[7]  oai:arXiv.org:0711.0249  [pdf] - 6637
The enigma of GCIRS 3 - Constraining the properties of the mid-infrared reference star of the central parsec of the Milky Way with optical long baseline interferometry
Comments: accepted by A&A, now in press; 19 pages, 22 figures, 5 tables
Submitted: 2007-11-02, last modified: 2008-02-15
GCIRS3 is the most prominent MIR source in the central pc of the Galaxy. NIR spectroscopy failed to solve the enigma of its nature. The properties of extreme individual objects of the central stellar cluster contribute to our knowledge of star and dust formation close to a supermassive black hole. We initiated an interferometric experiment to understand IRS3 and investigate its properties as spectroscopic and interferometric reference star at 10um. VISIR imaging separates a compact source from diffuse, surrounding emission. The VLTI/MIDI instrument was used to measure visibilities at 10mas resolution of that compact 10um source, still unresolved by a single VLT. Photometry data were added to enable simple SED- and full radiative transfer-models of the data. The luminosity and size estimates show that IRS3 is probably a cool carbon star enshrouded by a complex dust distribution. Dust temperatures were derived. The coinciding interpretation of multiple datasets confirm dust emission at several spatial scales. The IF data resolve the innermost area of dust formation. Despite observed deep silicate absorption towards IRS3 we favor a carbon rich chemistry of the circumstellar dust shell. The silicate absorption most probably takes place in the outer diffuse dust, which is mostly ignored by MIDI measurements. This indicates physically and chemically distinct conditions of the local dust, changing with the distance to IRS3. We have demonstrated that optical long baseline interferometry at infrared wavelengths is an indispensable tool to investigate sources at the Galactic Center. Our findings suggest further studies of the composition of interstellar dust and the shape of the 10um silicate feature at this outstanding region.
[8]  oai:arXiv.org:astro-ph/0512544  [pdf] - 78744
Integrated optics for astronomical interferometry - VI. Coupling the light of the VLTI in K band
Comments:
Submitted: 2005-12-21
Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device and compare its properties to other single mode beam combiner like the previously used MONA fiber coupler. The IO combiner provides a high optical throughput, a contrast of 89% with a night-to-night stability of a few percent. Even if a dispersive phase is present, we show that it does not bias the measured Fourier visibility estimate. An upper limit of 0.005 for the cross-talk between linear polarization states has been measured. We take advantage of the intrinsic contrast stability to test a new astronomical prodecure for calibrating diameters of simple stars by simultaneously fitting the instrumental contrast and the apparent stellar diameters. This method reaches an accuracy with diameter errors of the order of previous ones but without the need of an already known calibrator. These results are an important step of integrated optics and paves the road to incoming imaging interferometer projects.
[9]  oai:arXiv.org:astro-ph/0505513  [pdf] - 73283
VLTI/MIDI measurements of extended mid-infrared emission in the Galactic Center
Comments: 2 pages, to be published in the proceedings of the ESO workshop: "The power of optical/IR interferometry: recent scientific results and 2nd generation VLTI instrumentation"
Submitted: 2005-05-25
We investigated with MIDI the extension of dusty mid-infrared excess sources (IRS 1W, IRS 10W, IRS 2, IRS 8) in immediate vicinity to the black hole (BH) at the GC. We derive 3$\sigma$ upper limits of the correlated fluxes of our target sources which give direct constraints on the size of the emitting regions. Most probably the emission originates from bow shocks generated by windy stars ploughing through the dense matter of the Northern MiniSpiral.
[10]  oai:arXiv.org:astro-ph/0505228  [pdf] - 1233536
A feasibility study of future observations with MIDI and other VLTI science instruments: The example of the Galactic Center
Comments: 10 pages, 2 figures, published in Proceedings of SPIE Volume 5491 "New Frontiers in Stellar Interferometry"
Submitted: 2005-05-11
VLT-Interferometry will allow imaging of the Galactic Center (GC) and the nuclei of extragalactic sources at an angular resolution of a few milliarcseconds. VLTI will be a prime instrument to study the immediate environment of the massive black hole at the center of the Milky Way. With the MID infrared Interferometric instrument (MIDI) for example the enigmatic compact dust embedded MIR-excess sources within the central parsec should be resolvable. Further the observations of external galactic nuclei will allow unprecedented measurements of physical parameters (i.e. structure and luminosity) in these systems. With the exception of a few 'self-referencing' sources these faint-target observations will benefit from the available off-axis wavefront-correction system. To fully exploit the use of VLTI within this context, the following questions have to be addressed among others: How feasible is blind-pointing on (faint) science targets? Are VLTI observations still efficiently feasible if these faint science targets exceed the usual angular distance (<=1arcmin) to a GuideStar [...]? How is the fringe-tracking procedure affected in densely populated regions such as the GC? What preparatory steps have to be performed to successfully observe these non-standard targets with the VLTI? In this contribution, we present aspects for the preparation of VLTI observations, which will be conducted in the near future. Considering these example observations of the GC region, several details of observing modes are discussed, which are necessary to observe such science targets. The final goal is the definition of observational strategies [...] touching the limits of VLTI observability.
[11]  oai:arXiv.org:astro-ph/0505189  [pdf] - 72959
VLTI observations of IRS~3: The brightest compact MIR source at the Galactic Centre
Comments: 4 pages, 3 figures, published in: The ESO Messenger
Submitted: 2005-05-10
The dust enshrouded star IRS~3 in the central light year of our galaxy was partially resolved in a recent VLTI experiment. The presented observation is the first step in investigating both IRS~3 in particular and the stellar population of the Galactic Centre in general with the VLTI at highest angular resolution. We will outline which scientific issues can be addressed by a complete MIDI dataset on IRS~3 in the mid infrared.
[12]  oai:arXiv.org:astro-ph/0410625  [pdf] - 68474
Calibration Observations of Fomalhaut with the VLTI
Comments: 6 pages, 4 figures, uses an.cls, accepted for publication in Astron. Nacht
Submitted: 2004-10-26
An investigation of the stability of the transfer function of the European Southern Observatory's Very Large Telescope Interferometer has been carried out through observations of Fomalhaut over a wide range in hour angle. No significant variation in the transfer function was found for the zenith angle range 5-70 degrees. The projected baseline varied between 139.7 m and 49.8 m during the observations and, as an integral part of the determination of the transfer function, a new accurate limb-darkened angular diameter for Fomalhaut has been established. This has led to improved values for the emergent flux, effective temperature, radius and luminosity.
[13]  oai:arXiv.org:astro-ph/0407079  [pdf] - 65921
Near-IR speckle imaging of massive young stellar objects
Comments: 17 pages, 16 figures, accepted for publication in A&A
Submitted: 2004-07-05
We present near-IR speckle images of 21 massive Young Stellar Objects (YSOs) associated with outflows. The aim of this study is to search for sub-arcsecond reflection nebulae associated with the outflow cavity. We find that 6 of the massive YSOs show a conical nebula which can be interpreted in terms of reflected light from the dusty walls of the outflow cavity. In all cases, the small scale structures seen in our images are compared with outflow indicators found in the literature. No clear correlation is found between the presence of the reflection nebulosity and any property such as degree of embeddedness. We also note that 3 of the sources show close companions, one of them belonging also to the sample with conical nebula.
[14]  oai:arXiv.org:astro-ph/0101426  [pdf] - 40564
Multi-Conjugate Adaptive Optics with two Deformable Mirrors - Requirements and Performance
Comments: 22 pages, 13 figures, accepted by Experimental Astronomy
Submitted: 2001-01-24
In order to increase the corrected field of view of an adaptive optics (AO) system, several deformable mirrors (DM) have to be placed in the conjugate planes of the dominant turbulent layers (multi-conjugate adaptive optics, MCAO [Beckers et al.]). The performance of MCAO systems depends on the quality of the wavefront sensing of the individual layers and on the number of corrected modes in each individual layer as in single layer AO systems. In addition, the increase in corrected field of view depends on the number of guide stars providing information about the turbulence over a sufficiently large area in each turbulent layer. In this paper, we investigate these points and provide formulae for calculating the increased field of view with a new approach using the spatial correlation functions of the applied polynomials (e.g. Zernike). We also present a new scheme of measuring the individual wavefront distortion of each of the dominant layers with a Shack-Hartmann-Curvature Sensor using gradient information as well as scintillation. An example for the performance of a two layer MCAO system is given for the 3.5-m telescope of the Calar Alto Observatory, Spain, using a measured Cn2-profile. The corrected field of view in K-band (2.2 Microns) can be as large as 3 arcmin with a Strehl ratio above 60%.