Sagittarius A* (Sgr A*) is the variable radio, near-infrared (NIR), and X-ray source associated with accretion onto the Galactic center black hole. We present an analysis of the most comprehensive NIR variability dataset of Sgr A* to date: eight 24-hour epochs of continuous monitoring of Sgr A* at 4.5 $\mu$m with the IRAC instrument on the Spitzer Space Telescope, 93 epochs of 2.18 $\mu$m data from Naos Conica at the Very Large Telescope, and 30 epochs of 2.12 $\mu$m data from the NIRC2 camera at the Keck Observatory, in total 94,929 measurements. A new approximate Bayesian computation method for fitting the first-order structure function extracts information beyond current Fast Fourier Transformation (FFT) methods of power spectral density (PSD) estimation. With a combined fit of the data of all three observatories, the characteristic coherence timescale of Sgr A* is $\tau_{b} = 243^{+82}_{-57}$ minutes ($90\%$ credible interval). The PSD has no detectable features on timescales down to 8.5 minutes ($95\%$ credible level), which is the ISCO orbital frequency for a dimensionless spin parameter $a = 0.92$. One light curve measured simultaneously at 2.12 and 4.5 $\mu$m during a low flux-density phase gave a spectral index $\alpha_s = 1.6 \pm 0.1$ ($F_\nu \propto \nu^{-\alpha_s}$). This value implies that the Sgr A* NIR color becomes bluer during higher flux-density phases. The probability densities of flux densities of the combined datasets are best fit by log-normal distributions. Based on these distributions, the Sgr A* spectral energy distribution is consistent with synchrotron radiation from a non-thermal electron population from below 20 GHz through the NIR.

We present observational constraints on the stellar populations of two ultra-diffuse galaxies (UDGs) using optical through near-infrared (NIR) spectral energy distribution (SED) fitting. Our analysis is enabled by new $Spitzer$-IRAC 3.6 $\mu$m and 4.5 $\mu$m imaging, archival optical imaging, and the prospector fully Bayesian SED fitting framework. Our sample contains one field UDG (DGSAT I), one Virgo cluster UDG (VCC 1287), and one Virgo cluster dwarf elliptical for comparison (VCC 1122). We find that the optical--NIR colors of the three galaxies are significantly different from each other. We infer that VCC 1287 has an old ($\gtrsim7.7$ Gyr) and surprisingly metal-poor ($[Z/Z_{\odot}]\lesssim-1.0$) stellar population, even after marginalizing over uncertainties on diffuse interstellar dust. In contrast, the field UDG DGSAT I shows evidence of being younger than the Virgo UDG, with an extended star formation history and an age posterior extending down to $\sim3$ Gyr. The stellar metallicity of DGSAT I is sub-solar but higher than that of the Virgo UDG, with $[Z/Z_{\odot}]=-0.63^{+0.35}_{-0.62}$; in the case of exactly zero diffuse interstellar dust, DGSAT I may even have solar metallicity. With VCC 1287 and several Coma UDGs, a general picture is emerging where cluster UDGs may be "failed" galaxies, but the field UDG DGSAT I seems more consistent with a stellar feedback-induced expansion scenario. In the future, our approach can be applied to a large and diverse sample of UDGs down to faint surface brightness limits, with the goal of constraining their stellar ages, stellar metallicities, and circumstellar and diffuse interstellar dust content.

We have used the Spitzer Space Telescope in February 2016 to obtain high cadence, high signal-to-noise, 17-hour duration light curves of Neptune at 3.6 and 4.5 $\mu$m. The light curve duration was chosen to correspond to the rotation period of Neptune. Both light curves are slowly varying with time, with full amplitudes of 1.1 mag at 3.6 $\mu$m and 0.6 mag at 4.5 $\mu$m. We have also extracted sparsely sampled 18-hour light curves of Neptune at W1 (3.4 $\mu$m) and W2 (4.6 $\mu$m) from the WISE/NEOWISE archive at six epochs in 2010-2015. These light curves all show similar shapes and amplitudes compared to the Spitzer light curves but with considerable variation from epoch to epoch. These amplitudes are much larger than those observed with Kepler/K2 in the visible (amplitude $\sim$0.02 mag) or at 845 nm with the Hubble Space Telescope in 2015 and at 763 nm in 2016 (amplitude $\sim$ 0.2 mag). We interpret the Spitzer and WISE light curves as arising entirely from reflected solar photons, from higher levels in Neptune's atmosphere than for K2. Methane gas is the dominant opacity source in Neptune's atmosphere, and methane absorption bands are present in the HST 763, and 845 nm, WISE W1, and Spitzer 3.6 $\mu$m filters.

We examine the repeatability, reliability, and accuracy of differential exoplanet eclipse depth measurements made using the InfraRed Array Camera (IRAC) on the Spitzer Space Telescope during the post-cryogenic mission. We have re-analyzed an existing 4.5 {\mu}m data set, consisting of 10 observations of the XO-3b system during secondary eclipse, using seven different techniques for removing correlated noise. We find that, on average, for a given technique, the eclipse depth estimate is repeatable from epoch to epoch to within 156 parts per million (ppm). Most techniques derive eclipse depths that do not vary by more than a factor 3 of the photon noise limit. All methods but one accurately assess their own errors: for these methods, the individual measurement uncertainties are comparable to the scatter in eclipse depths over the 10 epoch sample. To assess the accuracy of the techniques as well as to clarify the difference between instrumental and other sources of measurement error, we have also analyzed a simulated data set of 10 visits to XO-3b, for which the eclipse depth is known. We find that three of the methods (BLISS mapping, Pixel Level Decorrelation, and Independent Component Analysis) obtain results that are within three times the photon limit of the true eclipse depth. When averaged over the 10 epoch ensemble, 5 out of 7 techniques come within 60 ppm of the true value. Spitzer exoplanet data, if obtained following current best practices and reduced using methods such as those described here, can measure repeatable and accurate single eclipse depths, with close to photon-limited results.

The dominant non-instrumental background source for space-based infrared observatories is the zo- diacal light. We present Spitzer Infrared Array Camera (IRAC) measurements of the zodiacal light at 3.6, 4.5, 5.8, and 8.0 {\mu}m, taken as part of the instrument calibrations. We measure the changing surface brightness levels in approximately weekly IRAC observations near the north ecliptic pole (NEP) over the period of roughly 8.5 years. This long time baseline is crucial for measuring the annual sinusoidal variation in the signal levels due to the tilt of the dust disk with respect to the ecliptic, which is the true signal of the zodiacal light. This is compared to both Cosmic Background Explorer Diffuse Infrared Background Experiment (COBE DIRBE) data and a zodiacal light model based thereon. Our data show a few percent discrepancy from the Kelsall et al. (1998) model including a potential warping of the interplanetary dust disk and a previously detected overdensity in the dust cloud directly behind the Earth in its orbit. Accurate knowledge of the zodiacal light is important for both extragalactic and Galactic astronomy including measurements of the cosmic infrared background, absolute measures of extended sources, and comparison to extrasolar interplanetary dust models. IRAC data can be used to further inform and test future zodiacal light models.

We present several corrections for point source photometry to be applied to data from the Infrared Array Camera (IRAC) on the Spitzer Space Telescope. These corrections are necessary because of characteristics of the IRAC arrays and optics and the way the instrument is calibrated in-flight. When these corrections are applied, it is possible to achieve a ~2% relative photometric accuracy for sources of adequate signal to noise in an IRAC image.

The Infrared Array Camera (IRAC) is a four-channel camera on the Spitzer Space Telescope, one of three focal plane science instruments. IRAC uses two pairs of 256x256 pixel InSb and Si:As IBC detectors to provide simultaneous imaging at 3.6, 4.5, 5.8, and 8 microns. IRAC experiences a flux of cosmic rays and solar protons that produce transient effects in science images from each of the arrays, with 4-6 pixels per second being affected during each integration. During extreme solar flares, IRAC experiences a much higher rate of transients which affects the science data quality. We present cosmic ray rates and observed detector characteristics for IRAC during the first two years of science operation, and rates observed in a period of elevated solar proton flux during an intense solar flare in January 2005. We show the changes to the IRAC detectors observed since launch, and assess their impacts to the science data quality.

The Infrared Array Camera (IRAC) on the Spitzer Space Telescope is absolutely calibrated by comparing photometry on a set of A stars near the north ecliptic pole to predictions based on ground-based observations and a stellar atmosphere model. The brightness of point sources is calibrated to an accuracy of 3%, relative to models for A star stellar atmospheres, for observations performed and analyzed in the same manner as the calibration stars. This includes corrections for location of the star in the array and the location if the centroid within the peak pixel. Long-term stability of the IRAC photometry was measured by monitoring the brightness of A dwarfs and K giants (near the north ecliptic pole) observed several times per month; the photometry is stable to 1.5% (rms) over a year. Intermediate-time-scale stability of the IRAC photometry was measured by monitoring at least one secondary calibrator (near the ecliptic plane) every 12 hr while IRAC is in nominal operations; the intermediate-term photometry is stable with a 1% dispersion (rms). One of the secondary calibrators was found to have significantly time-variable (5%) mid-infrared emission, with period (7.4 days) matching the optical light curve; it is possibly a Cepheid variable.

We investigate the density structure of the interstellar medium using new high-resolution maps of the 8 micron, 24 micron, and 70 micron surface brightness towards a molecular cloud in the Gum Nebula, made as part of the Spitzer Space Telescope Galactic First Look Survey. The maps are correlated with 100 micron images measured with IRAS. At 24 and 70 micron, the spatial power spectrum of surface brightness follows a power law with spectral index -3.5. At 24 micron, the power law behavior is remarkably consistent from the 0.2 degree size of our maps down to the 5 arcsecond spatial resolution. Thus, the structure of the 24 micron emission is self-similar even at milliparsec scales. The combined power spectrum produced from Spitzer 24 micron and IRAS 25 micron images is consistent with a change in the power law exponent from -2.6 to -3.5. The decrease may be due to the transition from a two-dimensional to three-dimensional structure. Under this hypothesis, we estimate the thickness of the emitting medium to be 0.3 pc.