Supernova remnants (SNRs) are believed to be the source of Galactic cosmic rays (CRs). SNR shocks accelerate CR protons and electrons which reveal key insights into the non-thermal physics by means of their synchrotron and $\gamma$-ray emission. The remnant SN 1006 is an ideal particle acceleration laboratory because it is observed across all electromagnetic wavelengths from radio to $\gamma$-rays. We perform three-dimensional (3D) magnetohydrodynamics (MHD) simulations where we include CR protons and follow the CR electron spectrum. By matching the observed morphology and non-thermal spectrum of SN 1006 in radio, X-rays and $\gamma$-rays, we gain new insight into CR electron acceleration and magnetic field amplification. 1. We show that a mixed leptonic-hadronic model is responsible for the $\gamma$-ray radiation: while leptonic inverse-Compton emission and hadronic pion-decay emission contribute equally at GeV energies observed by Fermi, TeV energies observed by imaging air Cherenkov telescopes are hadronically dominated. 2. We show that quasi-parallel acceleration (i.e., when the shock propagates at a narrow angle to the upstream magnetic field) is preferred for CR electrons and that the electron acceleration efficiency of radio-emitting GeV electrons at quasi-perpendicular shocks is suppressed at least by a factor ten. This poses a challenge for the interpretation of plasma particle-in-cell simulations of particle acceleration at shocks. 3. To match the radial emission profiles and the $\gamma$-ray spectrum, we require a volume-filling, turbulently amplified magnetic field and that the Bell-amplified magnetic field is damped in the immediate post-shock region. Our work connects micro-scale plasma physics simulations to the scale of SNRs.

Star clusters form in dense, hierarchically collapsing gas clouds. Bulk kinetic energy is transformed to turbulence with stars forming from cores fed by filaments. In the most compact regions, stellar feedback is least effective in removing the gas and stars may form very efficiently. These are also the regions where, in high-mass clusters, ejecta from some kind of high-mass stars are effectively captured during the formation phase of some of the low mass stars and effectively channeled into the latter to form multiple populations. Star formation epochs in star clusters are generally set by gas flows that determine the abundance of gas in the cluster. We argue that there is likely only one star formation epoch after which clusters remain essentially clear of gas by cluster winds. Collisional dynamics is important in this phase leading to core collapse, expansion and eventual dispersion of every cluster. We review recent developments in the field with a focus on theoretical work.

Star formation is a complex multi-scale phenomenon that is of significant importance for astrophysics in general. Stars and star formation are key pillars in observational astronomy from local star forming regions in the Milky Way up to high-redshift galaxies. From a theoretical perspective, star formation and feedback processes (radiation, winds, and supernovae) play a pivotal role in advancing our understanding of the physical processes at work, both individually and of their interactions. In this review we will give an overview of the main processes that are important for the understanding of star formation. We start with an observationally motivated view on star formation from a global perspective and outline the general paradigm of the life-cycle of molecular clouds, in which star formation is the key process to close the cycle. After that we focus on the thermal and chemical aspects in star forming regions, discuss turbulence and magnetic fields as well as gravitational forces. Finally, we review the most important stellar feedback mechanisms.

In recent years, exciting developments have taken place in the identification of the role of cosmic rays in star-forming environments. Observations from radio to infrared wavelengths and theoretical modelling have shown that low-energy cosmic rays (<1 TeV) play a fundamental role in shaping the chemical richness of the interstellar medium, determining the dynamical evolution of molecular clouds. In this review we summarise in a coherent picture the main results obtained by observations and by theoretical models of propagation and generation of cosmic rays, from the smallest scales of protostars and circumstellar discs, to young stellar clusters, up to Galactic and extragalactic scales. We also discuss the new fields that will be explored in the near future thanks to new generation instruments, such as: CTA, for the $\gamma$-ray emission from high-mass protostars; SKA and precursors, for the synchrotron emission at different scales; and ELT/HIRES, JWST, and ARIEL, for the impact of cosmic rays on exoplanetary atmospheres and habitability.

The mass function of clumps observed in molecular clouds raises interesting theoretical issues, especially in its relation to the stellar initial mass function. We propose a statistical model of the mass function of prestellar cores (CMF), formed in self-gravitating isothermal clouds at a given stage of their evolution. The latter is characterized by the mass-density probability distribution function ($\rho$-PDF), which is a power-law with slope $q$. The variety of MCs is divided in ensembles according to the PDF slope and each ensemble is represented by a single spherical cloud. The cores are considered as elements of self-similar structure typical for fractal clouds and are modeled by spherical objects populating each cloud shell. Our model assumes relations between size, mass and density of the statistical cores. Out of them a core mass-density relationship $\rho\propto m^x$ is derived where $x=1/(1+q)$. We found that $q$ determines the existence or non-existence of a threshold density for core collapse. The derived general CMF is a power law of slope $-1$ while the CMF of gravitationally unstable cores has a slope $(-1 + x/2)$, comparable with the slopes of the high-mass part of the stellar initial mass function and of observational CMFs.

Cosmic ray (CR) protons are an important component in many astrophysical systems. Processes like CR injection, cooling, adiabatic changes as well as active CR transport through the medium strongly modify the CR momentum distribution and have to be taken into account in hydrodynamical simulations. We present an efficient novel numerical scheme to accurately compute the evolution of the particle distribution function by solving the Fokker-Planck equation with a low number of spectral bins (10 - 20), which is required to include a full spectrum for every computational fluid element. The distribution function is represented by piecewise power laws and is not forced to be continuous, which enables an optimal representation of the spectrum. The Fokker-Planck equation is solved with a two-moment approach evolving the CR number and energy density. The low numerical diffusion of the scheme reduces the numerical errors by orders of magnitude in comparison to classical schemes with piecewise constant spectral representations. With this method not only the spectral evolution of CRs can be computed accurately in magnetohydrodynamic simulations but also their dynamical impact as well as CR ionisation. This allows for more accurate models for astrophysical plasmas, like the interstellar medium, and direct comparisons with observations.

Cosmic ray (CR) electrons reveal key insights into the non-thermal physics of the interstellar medium, galaxies, galaxy clusters, and active galactic nuclei by means of their inverse Compton {\gamma}-ray emission and synchrotron emission in magnetic fields. While magnetohydrodynamical (MHD) simulations with CR protons capture their dynamical impact on these systems, only few computational studies include CR electron physics because of the short cooling time-scales and complex hysteresis effects, which require a numerically expensive, high-resolution spectral treatment. Since CR electrons produce important non-thermal observational signatures, such a spectral CR electron treatment is important to link MHD simulations to observations. We present an efficient post-processing code for Cosmic Ray Electron Spectra that are evolved in Time (CREST) on Lagrangian tracer particles. The CR electron spectra are very accurately evolved on comparably large MHD time steps owing to an innovative hybrid numerical-analytical scheme. CREST is coupled to the cosmological MHD code AREPO and treats all important aspects of spectral CR electron evolution such as adiabatic expansion and compression, Coulomb losses, radiative losses in form of inverse Compton, bremsstrahlung and synchrotron processes, diffusive shock acceleration and reacceleration, and Fermi-II reacceleration. After showing various code validations of idealized one-zone simulations, we study the coupling of CREST to MHD simulations. We demonstrate that the CR electron spectra are efficiently and accurately evolved in shock-tube and Sedov-Taylor blast wave simulations. This opens up the possibility to produce self-consistent synthetic observables of non-thermal emission processes in various astrophysical environments.

We present a new approach to extract the power-law part of a density/column-density probability density function (rho-pdf/N-pdf) in star-forming clouds. It is based on the mathematical method bPLFIT of Virkar & Clauset (2014) and assesses the power-law part of an arbitrary distribution, without any assumptions about the other part of this distribution. The slope and deviation point are derived as averaged values as the number of bins is varied. Neither parameter is sensitive to spikes and other local features of the tail. This adapted bPLFIT method is applied to two different sets of data from numerical simulations of star-forming clouds at scales 0.5 and 500 pc and displays rho-pdf and N-pdf evolution in agreement with a number of numerical and theoretical studies. Applied to Herschel data on the regions Aquila and Rosette, the method extracts pronounced power-law tails, consistent with those seen in simulations of evolved clouds.

Mrk 71/NGC 2366 is the closest Green Pea (GP) analog and candidate Lyman Continuum (LyC) emitter. Recently, 11 LyC-leaking GPs have been detected through direct observations of the ionizing continuum, making this the most abundant class of confirmed LyC-emitters at any redshift. High resolution, multi-wavelength studies of GPs can lead to an understanding of the method(s), through which LyC escapes from these galaxies. The proximity of Mrk 71/NCG 2366 offers unprecedented detail on the inner workings of a GP analog, and enables us to identify the mechanisms of LyC escape. We use 5825-7650{\AA} integral field unit PMAS observations to study the kinematics and physical conditions in Mrk 71. An electron density map is obtained from the [S II] ratio. A fortuitous second order contamination by the [O II]3727 doublet enables the construction of an electron temperature map. Resolved maps of sound speed, thermal broadening, "true" velocity dispersion, and Mach number are obtained and compared to the high resolution magneto-hydrodynamic SILCC simulations. Two regions of increased velocity dispersion indicative of outflows are detected to the north and south of the super star cluster, knot B, with redshifted and blueshifted velocities, respectively. We confirm the presence of a faint broad kinematical component, which is seemingly decoupled from the outflow regions, and is fainter and narrower than previously reported in the literature. Within uncertainties, the low- and high-ionization gas move together. Outside of the core of Mrk 71, an increase in Mach numbers is detected, implying a decrease in gas density. Simulations suggest this drop in density can be as high as ~4 dex, down to almost optically thin levels, which would imply a non-zero LyC escape fraction along the outflows... [abridged]

The C$^{+}$ ion is an important coolant of interstellar gas, and so the [CII] fine structure line is frequently observed in the interstellar medium. However, the physical and chemical properties of the [CII]-emitting gas are still unclear. We carry out non-LTE radiative transfer simulations with RADMC-3D to study the [CII] line emission from a young, turbulent molecular cloud before the onset of star formation, using data from the SILCC-Zoom project. The [CII] emission is optically thick over 40% of the observable area with $I_{[\textrm{CII}]} > 0.5$ K km s$^{-1}$. To determine the physical properties of the [CII] emitting gas, we treat the [CII] emission as optically thin. We find that the [CII] emission originates primarily from cold, moderate density gas ($40 \lesssim T \lesssim 65$ K and $50 \lesssim n \lesssim 440$ cm$^{-3}$), composed mainly of atomic hydrogen and with an effective visual extinction between $\sim 0.50$ and $\sim 0.91$. Gas dominated by molecular hydrogen contributes only $\lesssim$20% of the total [CII] line emission. Thus, [CII] is not a good tracer for CO-dark H$_2$ at this early phase in the cloud's lifetime. We also find that the total gas, H and C$^+$ column densities are all correlated with the integrated [CII] line emission, with power law slopes ranging from 0.5 to 0.7. Further, the median ratio between the total column density and the [CII] line emission is $Y_{{\rm CII}}\approx 1.1 \times 10^{21}$ cm$^{-2}$ (K km s$^{-1}$)$^{-1}$, and $Y_{{\rm CII}}$ scales with $I_{[\textrm{CII}]}^{-0.3}$. We expect $Y_{{\rm CII}}$ to change in environments with a lower or higher radiation field than simulated here.

Magnetic fields are ubiquitously observed in the interstellar medium (ISM) of present-day star-forming galaxies with dynamically relevant energy densities. Using three-dimensional magneto-hydrodynamic (MHD) simulations of the supernova (SN) driven ISM in the flux-freezing approximation (ideal MHD) we investigate the impact of the magnetic field on the chemical and dynamical evolution of the gas, fragmentation and the formation of molecular clouds. We follow the chemistry with a network of six species (H$^{+}$, H, H$_2$, C$^+$, CO, free electrons) including local shielding effects. We find that magnetic fields thicken the disc by a factor of a few to a scale height of $\sim100\,\mathrm{pc}$, delay the formation of dense (and molecular) gas by $\sim25\,\mathrm{Myr}$ and result in differently shaped gas structures. The magnetised gas fragments into fewer clumps, which are initially at subcritical mass-to-flux ratios, $M/\Phi\approx0.3(M/\Phi)_\mathrm{crit}$, and accrete gas preferentially parallel to the magnetic field lines until supercritial mass-to-flux ratios of up to order 10 are reached. The accretion rates onto molecular clouds scale with $\dot{M}\propto M^{1.5}$. The median of the inter-cloud velocity dispersion is $\sim2-5\,\mathrm{km\,s}^{-1}$ and lower than the internal velocity dispersion in the clouds ($\sim3-7\,\mathrm{km\,s}^{-1}$). However, individual cloud-cloud collisions occur at speeds of a few $10\,\mathrm{km\,s}^{-1}$.

Recent magneto-hydrodynamic simulations of the star-forming interstellar medium (ISM) with parsec scale resolution indicate that relativistic cosmic rays support the launching of galactic outflows on scales of a few kpc. If these fundamental constituents of the ISM are injected at the sites of supernova (SN) explosions, the outflows are smoother, colder, and denser than the highly structured, hot-phase driven outflows forming, e.g., by thermal SN energy injection alone. In this Letter we present computations of resonant Lyman-$\alpha$ (Ly$\alpha$) radiation transfer through snapshots of a suite of stratified disk simulations from the SILCC project. For a range of thermal, radiative, and kinetic feedback models only simulations including non-thermal cosmic rays produce Ly$\alpha$ spectra with enhanced red peaks and strong absorption at line center -- similar to observed systems. The absence of cosmic ray feedback leads to spectra incompatible with observations. We attribute this to the smoother neutral gas distribution of cosmic ray supported outflows within a few kpc from the disk midplane.

We investigate the impact of cosmic rays (CRs) on galactic outflows from a multi-phase interstellar medium with solar neighbourhood conditions. The three-dimensional magneto-hydrodynamical simulations include CRs as a relativistic fluid in the advection-diffusion approximation. The thermal and chemical state of the ISM is computed with a non-equilibrium chemical network. We find that CRs (injected with 10 \% of the supernova energy) efficiently support the launching of outflows and strongly affect their phase structure. Outflows leaving the midplane are denser ($\rho \sim 10^{-26}\,\mathrm{g\,cm}^{-3}$), colder ($\sim 10^4\,\mathrm{K}$), and slower ($\sim 30\,\mathrm{km\,s}^{-1}$) if CRs are considered in addition to thermal SNe. The CR supported outflows are also smoother, in particular at larger heights ($> 1\,\mathrm{kpc}$ above the midplane) without the direct impact of SN explosions. Approximately $5\% - 25\%$ of the injected CR energy is lost via hadronic cooling. Smaller diffusion coefficients lead to slightly larger hadronic losses but allow for steeper CR pressure gradients, stronger outflows and larger accelerations. Up to a height of $z \sim1\,\mathrm{kpc}$ there are large volumes in approximate pressure equilibrium between thermal and CR component. At larger altitudes the CR pressure is $10-100$ times as large as the thermal counterpart. More than $\sim 1\,\mathrm{kpc}$ away from the midplane, CRs provide the dominant gas acceleration mechanism.

We present high-resolution ($\sim$ 0.1 pc), hydrodynamical and magnetohydrodynamical simulations to investigate whether the observed level of molecular cloud (MC) turbulence can be generated and maintained by external supernova (SN) explosions. The MCs are formed self-consistently within their large-scale galactic environment following the non-equilibrium formation of H$_2$ and CO including (self-) shielding and important heating and cooling processes. The MCs inherit their initial level of turbulence from the diffuse ISM, where turbulence is injected by SN explosions. However, by systematically exploring the effect of individual SNe going off outside the clouds, we show that at later stages the importance of SN driven turbulence is decreased significantly. This holds for different MC masses as well as MCs with and without magnetic fields. The SN impact also decreases rapidly with larger distances. Nearby SNe ($d$ $\sim$ 25 pc) boost the turbulent velocity dispersions of the MC by up to 70 per cent (up to a few km s$^{-1}$). For $d$ $>$ 50 pc, however, their impact decreases fast with increasing $d$ and is almost negligible. For all probed distances the gain in velocity dispersion decays rapidly within a few 100 kyr. This is significantly shorter than the average timescale for a MC to be hit by a nearby SN under solar neighbourhood conditions ($\sim$ 2 Myr). Hence, at these conditions SNe are not able to sustain the observed level of MC turbulence. However, in environments with high gas surface densities and SN rates like the Central Molecular Zone, observed elevated MC dispersions could be triggered by external SNe.

The large vertical scale heights of the diffuse ionised gas (DIG) in disc galaxies are challenging to model, as hydrodynamical models including only thermal feedback seem to be unable to support gas at these heights. In this paper, we use a three dimensional Monte Carlo radiation transfer code to post-process disc simulations of the Simulating the Life-Cycle of Molecular Clouds (SILCC) project that include feedback by cosmic rays. We show that the more extended discs in simulations including cosmic ray feedback naturally lead to larger scale heights for the DIG which are more in line with observed scale heights. We also show that including a fiducial cosmic ray heating term in our model can help to increase the temperature as a function of disc scale height, but fails to reproduce observed DIG nitrogen and sulphur forbidden line intensities. We show that, to reproduce these line emissions, we require a heating mechanism that affects gas over a larger density range than is achieved by cosmic ray heating, which can be achieved by fine tuning the total luminosity of ionising sources to get an appropriate ionising spectrum as a function of scale height. This result sheds a new light on the relation between forbidden line emissions and temperature profiles for realistic DIG gas distributions.

We present 3D "zoom-in" simulations of the formation of two molecular clouds out of the galactic interstellar medium. We model the clouds - identified from the SILCC simulations - with a resolution of up to 0.06 pc using adaptive mesh refinement in combination with a chemical network to follow heating, cooling, and the formation of H$_2$ and CO including (self-) shielding. The two clouds are assembled within a few million years with mass growth rates of up to $\sim$ 10$^{-2}$ M$_\mathrm{sun}$ yr$^{-1}$ and final masses of $\sim$ 50 000 M$_\mathrm{sun}$. A spatial resolution of $\lesssim$ 0.1 pc is required for convergence with respect to the mass, velocity dispersion, and chemical abundances of the clouds, although these properties also depend on the cloud definition such as based on density thresholds, H$_2$ or CO mass fraction. To avoid grid artefacts, the progressive increase of resolution has to occur within the free-fall time of the densest structures (1 - 1.5 Myr) and $\gtrsim$ 200 time steps should be spent on each refinement level before the resolution is progressively increased further. This avoids the formation of spurious, large-scale, rotating clumps from unresolved turbulent flows. While CO is a good tracer for the evolution of dense gas with number densities $n \geq$ 300 cm$^{-3}$, H$_2$ is also found for $n \lesssim 30$ cm$^{-3}$ due to turbulent mixing and becomes dominant at column densities around 30 - 50 M$_\mathrm{sun}$ pc$^{-2}$. The CO-to-H$_2$ ratio steadily increases within the first 2 Myr whereas $X_\mathrm{CO}\simeq$ 1 - 4 $\times$ 10$^{20}$ cm$^{-2}$ (K km s$^{-1}$)$^{-1}$ is approximately constant since the CO(1-0) line quickly becomes optically thick.

We present three-dimensional magneto-hydrodynamical simulations of the self-gravitating interstellar medium (ISM) in a periodic (256 pc)$^3$ box with a mean number density of 0.5 cm$^{-3}$. At a fixed supernova rate we investigate the multi-phase ISM structure, H$_{2}$ molecule formation and density-magnetic field scaling for varying initial magnetic field strengths (0, $6\times 10^{-3}$, 0.3, 3 $\mu$G). All magnetic runs saturate at mass weighted field strengths of $\sim$ 1 $-$ 3 $\mu$G but the ISM structure is notably different. With increasing initial field strengths (from $6\times 10^{-3}$ to 3 $\mu$G) the simulations develop an ISM with a more homogeneous density and temperature structure, with increasing mass (from 5% to 85%) and volume filling fractions (from 4% to 85%) of warm (300 K $<$ T $<$ 8000 K) gas, with decreasing volume filling fractions (VFF) from $\sim$ 35% to $\sim$ 12% of hot gas (T $> 10^5$ K) and with a decreasing H$_{2}$ mass fraction (from 70% to $<$ 1%). Meanwhile the mass fraction of gas in which the magnetic pressure dominates over the thermal pressure increases by a factor of 10, from 0.07 for an initial field of $6\times 10^{-3}$ $\mu$G to 0.7 for a 3 $\mu$G initial field. In all but the simulations with the highest initial field strength self-gravity promotes the formation of dense gas and H$_{2}$, but does not change any other trends. We conclude that magnetic fields have a significant impact on the multi-phase, chemical and thermal structure of the ISM and discuss potential implications and limitations of the model.

We present three-dimensional radiation-hydrodynamical simulations of the impact of stellar winds, photoelectric heating, photodissociating and photoionising radiation, and supernovae on the chemical composition and star formation in a stratified disc model. This is followed with a sink-based model for star clusters with populations of individual massive stars. Stellar winds and ionising radiation regulate the star formation rate at a factor of ~10 below the simulation with only supernova feedback due to their immediate impact on the ambient interstellar medium after star formation. Ionising radiation (with winds and supernovae) significantly reduces the ambient densities for most supernova explosions to rho < 10^-25 g cm^-3, compared to 10^-23 g cm^-3 for the model with only winds and supernovae. Radiation from massive stars reduces the amount of molecular hydrogen and increases the neutral hydrogen mass and volume filling fraction. Only this model results in a molecular gas depletion time scale of 2 Gyr and shows the best agreement with observations. In the radiative models, the Halpha emission is dominated by radiative recombination as opposed to collisional excitation (the dominant emission in non-radiative models), which only contributes ~1-10 % to the total Halpha emission. Individual massive stars (M >= 30 M_sun) with short lifetimes are responsible for significant fluctuations in the Halpha luminosities. The corresponding inferred star formation rates can underestimate the true instantaneous star formation rate by factors of ~10.

Dust grains are an important component of the interstellar medium (ISM) of galaxies. We present the first direct measurement of the residence times of interstellar dust in the different ISM phases, and of the transition rates between these phases, in realistic hydrodynamical simulations of the multi-phase ISM. Our simulations include a time-dependent chemical network that follows the abundances of H^+, H, H_2, C^+ and CO and take into account self-shielding by gas and dust using a tree-based radiation transfer method. Supernova explosions are injected either at random locations, at density peaks, or as a mixture of the two. For each simulation, we investigate how matter circulates between the ISM phases and find more sizeable transitions than considered in simple mass exchange schemes in the literature. The derived residence times in the ISM phases are characterised by broad distributions, in particular for the molecular, warm and hot medium. The most realistic simulations with random and mixed driving have median residence times in the molecular, cold, warm and hot phase around 17, 7, 44 and 1 Myr, respectively. The transition rates measured in the random driving run are in good agreement with observations of Ti gas-phase depletion in the warm and cold phases in a simple depletion model, although the depletion in the molecular phase is under-predicted. ISM phase definitions based on chemical abundance rather than temperature cuts are physically more meaningful, but lead to significantly different transition rates and residence times because there is no direct correspondence between the two definitions.

We study the impact of stellar winds and supernovae on the multi-phase interstellar medium using three-dimensional hydrodynamical simulations carried out with FLASH. The selected galactic disc region has a size of (500 pc)$^2$ x $\pm$ 5 kpc and a gas surface density of 10 M$_{\odot}$/pc$^2$. The simulations include an external stellar potential and gas self-gravity, radiative cooling and diffuse heating, sink particles representing star clusters, stellar winds from these clusters which combine the winds from indi- vidual massive stars by following their evolution tracks, and subsequent supernova explosions. Dust and gas (self-)shielding is followed to compute the chemical state of the gas with a chemical network. We find that stellar winds can regulate star (cluster) formation. Since the winds suppress the accretion of fresh gas soon after the cluster has formed, they lead to clusters which have lower average masses (10$^2$ - 10$^{4.3}$ M$_{\odot}$) and form on shorter timescales (10$^{-3}$ - 10 Myr). In particular we find an anti-correlation of cluster mass and accretion time scale. Without winds the star clusters easily grow to larger masses for ~5 Myr until the first supernova explodes. Overall the most massive stars provide the most wind energy input, while objects beginning their evolution as B-type stars contribute most of the supernova energy input. A significant outflow from the disk (mass loading $\gtrsim$ 1 at 1 kpc) can be launched by thermal gas pressure if more than 50% of the volume near the disc mid-plane can be heated to T > 3x10$^5$ K. Stellar winds alone cannot create a hot volume-filling phase. The models which are in best agreement with observed star formation rates drive either no outflows or weak outflows.

We present a hydrodynamical simulation of the turbulent, magnetized, supernova (SN)-driven interstellar medium (ISM) in a stratified box that dynamically couples the injection and evolution of cosmic rays (CRs) and a self-consistent evolution of the chemical composition. CRs are treated as a relativistic fluid in the advection-diffusion approximation. The thermodynamic evolution of the gas is computed using a chemical network that follows the abundances of H+, H, H2, CO, C+, and free electrons and includes (self-)shielding of the gas and dust. We find that CRs perceptibly thicken the disk with the heights of 90% (70%) enclosed mass reaching ~1.5 kpc (~0.2 kpc). The simulations indicate that CRs alone can launch and sustain strong outflows of atomic and ionized gas with mass loading factors of order unity, even in solar neighborhood conditions and with a CR energy injection per SN of 10^50 erg, 10% of the fiducial thermal energy of an SN. The CR-driven outflows have moderate launching velocities close to the midplane (~100 km/s) and are denser (\rho~1e-24 - 1e-26 g/cm^3), smoother, and colder than the (thermal) SN-driven winds. The simulations support the importance of CRs for setting the vertical structure of the disk as well as the driving of winds.

The SILCC project (SImulating the Life-Cycle of molecular Clouds) aims at a more self-consistent understanding of the interstellar medium (ISM) on small scales and its link to galaxy evolution. We present three-dimensional (magneto)hydrodynamic simulations of the ISM in a vertically stratified box including self-gravity, an external potential due to the stellar component of the galactic disc, and stellar feedback in the form of an interstellar radiation field and supernovae (SNe). The cooling of the gas is based on a chemical network that follows the abundances of H+, H, H2, C+, and CO and takes shielding into account consistently. We vary the SN feedback by comparing different SN rates, clustering and different positioning, in particular SNe in density peaks and at random positions, which has a major impact on the dynamics. Only for random SN positions the energy is injected in sufficiently low-density environments to reduce energy losses and enhance the effective kinetic coupling of the SNe with the gas. This leads to more realistic velocity dispersions (\sigma_HI ~ 0.8\sigma_(300-8000K) ~ 10-20km/s, \sigma_H\alpha ~ 0.6\sigma_(8000-3e5K) ~ 20-30km/s), and strong outflows with mass loading factors of up to 10 even for solar neighbourhood conditions. Clustered SNe abet the onset of outflows compared to individual SNe but do not influence the net outflow rate. The outflows do not contain any molecular gas and are mainly composed of atomic hydrogen. The bulk of the outflowing mass is dense (\rho ~ 1e-25-1e-24g/cc) and slow (v ~ 20-40km/s) but there is a high-velocity tail of up to v ~ 500km/s with \rho ~ 1e-28-1e-27g/cc.

The halo of the Milky Way contains a hot plasma with a surface brightness in soft X-rays of the order $10^{-12}$erg cm$^{-2}$ s$^{-1}$ deg$^{-2}$. The origin of this gas is unclear, but so far numerical models of galactic star formation have failed to reproduce such a large surface brightness by several orders of magnitude. In this paper, we analyze simulations of the turbulent, magnetized, multi-phase interstellar medium including thermal feedback by supernova explosions as well as cosmic-ray feedback. We include a time-dependent chemical network, self-shielding by gas and dust, and self-gravity. Pure thermal feedback alone is sufficient to produce the observed surface brightness, although it is very sensitive to the supernova rate. Cosmic rays suppress this sensitivity and reduce the surface brightness because they drive cooler outflows. Self-gravity has by far the largest effect because it accumulates the diffuse gas in the disk in dense clumps and filaments, so that supernovae exploding in voids can eject a large amount of hot gas into the halo. This can boost the surface brightness by several orders of magnitude. Although our simulations do not reach a steady state, all simulations produce surface brightness values of the same order of magnitude as the observations, with the exact value depending sensitively on the simulation parameters. We conclude that star formation feedback alone is sufficient to explain the origin of the hot halo gas, but measurements of the surface brightness alone do not provide useful diagnostics for the study of galactic star formation.

We report the novel detection of complex high-column density tails in the probability distribution functions (PDFs) for three high-mass star-forming regions (CepOB3, MonR2, NGC6334), obtained from dust emission observed with Herschel. The low column density range can be fit with a lognormal distribution. A first power-law tail starts above an extinction (Av) of ~6-14. It has a slope of alpha=1.3-2 for the rho~r^-alpha profile for an equivalent density distribution (spherical or cylindrical geometry), and is thus consistent with free-fall gravitational collapse. Above Av~40, 60, and 140, we detect an excess that can be fitted by a flatter power law tail with alpha>2. It correlates with the central regions of the cloud (ridges/hubs) of size ~1 pc and densities above 10^4 cm^-3. This excess may be caused by physical processes that slow down collapse and reduce the flow of mass towards higher densities. Possible are: 1. rotation, which introduces an angular momentum barrier, 2. increasing optical depth and weaker cooling, 3. magnetic fields, 4. geometrical effects, and 5. protostellar feedback. The excess/second power-law tail is closely linked to high-mass star-formation though it does not imply a universal column density threshold for the formation of (high-mass) stars.

We model driven, compressible, isothermal, turbulence with Mach numbers ranging from the subsonic ($\mathcal{M} \approx 0.65$) to the highly supersonic regime ($\mathcal{M}\approx 16 $). The forcing scheme consists both solenoidal (transverse) and compressive (longitudinal) modes in equal parts. We find a relation $\sigma_{s}^2 = \mathrm{b}\log{(1+\mathrm{b}^2\mathcal{M}^2)}$ between the Mach number and the standard deviation of the logarithmic density with $\mathrm{b} = 0.457 \pm 0.007$. The density spectra follow $\mathcal{D}(k,\,\mathcal{M}) \propto k^{\zeta(\mathcal{M})}$ with scaling exponents depending on the Mach number. We find $\zeta(\mathcal{M}) = \alpha \mathcal{M}^{\beta}$ with a coefficient $\alpha$ that varies slightly with resolution, whereas $\beta$ changes systematically. We extrapolate to the limit of infinite resolution and find $\alpha = -1.91 \pm 0.01,\, \beta =-0.30\pm 0.03$. The dependence of the scaling exponent on the Mach number implies a fractal dimension $D=2+0.96 \mathcal{M}^{-0.30}$. We determine how the scaling parameters depend on the wavenumber and find that the density spectra are slightly curved. This curvature gets more pronounced with increasing Mach number. We propose a physically motivated fitting formula $\mathcal{D}(k) = \mathcal{D}_0 k^{\zeta k^{\eta}}$ by using simple scaling arguments. The fit reproduces the spectral behaviour down to scales $k\approx 80$. The density spectrum follows a single power-law $\eta = -0.005 \pm 0.01$ in the low Mach number regime and the strongest curvature $\eta = -0.04 \pm 0.02$ for the highest Mach number. These values of $\eta$ represent a lower limit, as the curvature increases with resolution.

We use hydrodynamical simulations in a $(256\;{\rm pc})^3$ periodic box to model the impact of supernova (SN) explosions on the multi-phase interstellar medium (ISM) for initial densities $n = 0.5-30$ cm$^{-3}$ and SN rates $1-720$ Myr$^{-1}$. We include radiative cooling, diffuse heating, and the formation of molecular gas using a chemical network. The SNe explode either at random positions, at density peaks, or both. We further present a model combining thermal energy for resolved and momentum input for unresolved SNe. Random driving at high SN rates results in hot gas ($T\gtrsim 10^6$ K) filling $> 90$% of the volume. This gas reaches high pressures ($10^4 < P/k_\mathrm{B} < 10^7$ K cm$^{-3}$) due to the combination of SN explosions in the hot, low density medium and confinement in the periodic box. These pressures move the gas from a two-phase equilibrium to the single-phase, cold branch of the cooling curve. The molecular hydrogen dominates the mass ($>50$%), residing in small, dense clumps. Such a model might resemble the dense ISM in high-redshift galaxies. Peak driving results in huge radiative losses, producing a filamentary ISM with virtually no hot gas, and a small molecular hydrogen mass fraction ($\ll 1$%). Varying the ratio of peak to random SNe yields ISM properties in between the two extremes, with a sharp transition for equal contributions. The velocity dispersion in HI remains $\lesssim 10$ km s$^{-1}$ in all cases. For peak driving the velocity dispersion in H$_\alpha$ can be as high as $70$ km s$^{-1}$ due to the contribution from young, embedded SN remnants.

Column-density maps of molecular clouds are one of the most important observables in the context of molecular cloud- and star-formation (SF) studies. With the Herschel satellite it is now possible to determine the column density from dust emission. We use observations and simulations to demonstrate how LOS contamination affects the column density probability distribution function (PDF). We apply a first-order approximation (removing a constant level) to the molecular clouds of Auriga, Maddalena, Carina and NGC3603. In perfect agreement with the simulations, we find that the PDFs become broader, the peak shifts to lower column densities, and the power-law tail of the PDF flattens after correction. All PDFs have a lognormal part for low column densities with a peak at Av~2, a deviation point (DP) from the lognormal at Av(DP)~4-5, and a power-law tail for higher column densities. Assuming a density distribution rho~r^-alpha, the slopes of the power-law tails correspond to alpha(PDF)=1.8, 1.75, and 2.5 for Auriga, Carina, and NGC3603 (alpha~1.5-2 is consistent gravitational collapse). We find that low-mass and high-mass SF clouds display differences in the overall column density structure. Massive clouds assemble more gas in smaller cloud volumes than low-mass SF ones. However, for both cloud types, the transition of the PDF from lognormal shape into power-law tail is found at the same column density (at Av~4-5 mag). Low-mass and high-mass SF clouds then have the same low column density distribution, most likely dominated by supersonic turbulence. At higher column densities, collapse and external pressure can form the power-law tail. The relative importance of the two processes can vary between clouds and thus lead to the observed differences in PDF and column density structure.

The SILCC project (SImulating the Life-Cycle of molecular Clouds) aims at a more self-consistent understanding of the interstellar medium (ISM) on small scales and its link to galaxy evolution. We simulate the evolution of the multi-phase ISM in a 500 pc x 500 pc x 10 kpc region of a galactic disc, with a gas surface density of $\Sigma_{_{\rm GAS}} = 10 \;{\rm M}_\odot/{\rm pc}^2$. The Flash 4.1 simulations include an external potential, self-gravity, magnetic fields, heating and radiative cooling, time-dependent chemistry of H$_2$ and CO considering (self-) shielding, and supernova (SN) feedback. We explore SN explosions at different (fixed) rates in high-density regions (peak), in random locations (random), in a combination of both (mixed), or clustered in space and time (clustered). Only random or clustered models with self-gravity (which evolve similarly) are in agreement with observations. Molecular hydrogen forms in dense filaments and clumps and contributes 20% - 40% to the total mass, whereas most of the mass (55% - 75%) is in atomic hydrogen. The ionised gas contributes <10%. For high SN rates (0.5 dex above Kennicutt-Schmidt) as well as for peak and mixed driving the formation of H$_2$ is strongly suppressed. Also without self-gravity the H$_2$ fraction is significantly lower ($\sim$ 5%). Most of the volume is filled with hot gas ($\sim$90% within $\pm$2 kpc). Only for random or clustered driving, a vertically expanding warm component of atomic hydrogen indicates a fountain flow. Magnetic fields have little impact on the final disc structure. However, they affect dense gas ($n\gtrsim 10\;{\rm cm}^{-3}$) and delay H$_2$ formation. We highlight that individual chemical species, in particular atomic hydrogen, populate different ISM phases and cannot be accurately accounted for by simple temperature-/density-based phase cut-offs.

Giant Molecular Clouds (GMCs) are observed to be turbulent, but theory shows that without a driving mechanism turbulence should quickly decay. The question arises by which mechanisms turbulence is driven or sustained. It has been shown that photoionising feedback from massive stars has an impact on the surrounding GMC and can for example create vast HII bubbles. We therefore address the question of whether turbulence is a consequence of this effect of feedback on the cloud. To investigate this, we analyse the velocity field of simulations of high mass star forming regions by studying velocity structure functions and power spectra. We find that clouds whose morphology is strongly affected by photoionising feedback also show evidence of driving of turbulence by preserving or recovering a Kolmogorov-type velocity field. On the contrary, control run simulations without photoionising feedback have a velocity distribution that bears the signature of gravitational collapse and of the dissipation of energy, where the initial Kolmogorov-type structure function is erased.

Turbulence is a dominant feature operating in gaseous flows across nearly all scales in astrophysical environments. Accordingly, accurately estimating the statistical properties of such flows is necessary for developing a comprehensive understanding of turbulence. We develop and employ a hierarchical Bayesian fitting method to estimate the parameters describing the scaling relationships of the velocity power spectra of supersonic turbulence. We demonstrate the accuracy and other advantages of this technique compared with ordinary linear regression methods. Using synthetic power spectra, we show that the Bayesian method provides accurate parameter and error estimates. Commonly used normal linear regression methods can provide estimates that fail to recover the underlying slopes, up to 70% of the instances, even when considering the 2std.dev. uncertainties. Additionally, we apply the Bayesian methods to analyse the statistical properties of compressible turbulence in 3D numerical simulations. We model driven, isothermal, turbulence with rms Mach numbers in the highly supersonic regime M~15. We study the influence of purely solenoidal (divergence-free) and purely compressive (curl-free) forcing on the scaling exponent of the power spectrum. In simulations with solenoidal forcing and 1024^3 resolution, our results indicate that there is no extended inertial range with a constant scaling exponent. The bottleneck effect results in a curved power spectrum at all wave numbers and is more pronounced in the transversal modes compared with the longitudinal modes. Therefore, this effect is stronger in stationary turbulent flows driven by solenoidal forcing compared to the compressive one. The longitudinal spectrum driven with compressive forcing is the only spectrum with constant scaling exponent z=-1.94 +- 0.01, corresponding to slightly shallower slopes than the Burger's prediction.

We present a novel implementation of cosmic rays (CR) in the magneto-hydrodynamic code FLASH. CRs are described as separate fluids with different energies. CR advection, energy dependent anisotropic diffusion with respect to the magnetic field and adiabatic losses to follow the evolution of spectra are taken into account. We present a first study of the transport and immediate (~150 kyr) dynamical impact of CRs on the turbulent magnetised interstellar medium around supernova remnants on scales up to 80 pc. CR diffusion quickly leads to an efficient acceleration of low-density gas (mainly perpendicular to the magnetic field) with accelerations up to two orders of magnitude above the thermal values. Peaked (at 1 GeV) CR injection spectra have a stronger impact on the dynamics than power-law spectra. For realistic magnetic field configurations low energy CRs (with smaller diffusion coefficients) distribute anisotropically with large spatial variations of a factor of ten and more. Adiabatic losses can change the local spectra perceptibly but do not have an integral effect on the dynamics at the spatial and temporal scales considered here. We discuss the potential global impact of CRs and anisotropic transport on the dynamical structure of the ISM and also detail the limitations of the model.

The time evolution of the probability density function (PDF) of the mass density is formulated and solved for systems in free-fall using a simple appoximate function for the collapse of a sphere. We demonstrate that a pressure-free collapse results in a power-law tail on the high-density side of the PDF. The slope quickly asymptotes to the functional form $\mathrm{P}_v(\rho)\propto\rho^{-1.54}$ for the (volume-weighted) PDF and $\mathrm{P}_m(\rho)\propto\rho^{-0.54}$ for the corresponding mass-weighted distribution. From the simple approximation of the PDF we derive analytic descriptions for mass accretion, finding that dynamically quiet systems with narrow density PDFs lead to retarded star formation and low star formation rates. Conversely, strong turbulent motions that broaden the PDF accelerate the collapse causing a bursting mode of star formation. Finally, we compare our theoretical work with observations. The measured star formation rates are consistent with our model during the early phases of the collapse. Comparison of observed column density PDFs with those derived from our model suggests that observed star-forming cores are roughly in free-fall.

The probability density function (PDF) of the gas density in subsonic and supersonic, isothermal, driven turbulence is analyzed with a systematic set of hydrodynamical grid simulations with resolutions up to 1024^3 cells. We performed a series of numerical experiments with root mean square (r.m.s.) Mach number M ranging from the nearly incompressible, subsonic (M=0.1) to the highly compressible, supersonic (M=15) regime. We study the influence of two extreme cases for the driving mechanism by applying a purely solenoidal (divergence-free) and a purely compressive (curl-free) forcing field to drive the turbulence. We find that our measurements fit the linear relation between the r.m.s. Mach number and the standard deviation of the density distribution in a wide range of Mach numbers, where the proportionality constant depends on the type of the forcing. In addition, we propose a new linear relation between the standard deviation of the density distribution and the standard deviation of the velocity in compressible modes, i.e. the compressible component of the r.m.s. Mach number. In this relation the influence of the forcing is significantly reduced, suggesting a linear relation between the standard deviation of the density distribution and the standard deviation of the velocity in compressible modes, independent of the forcing, ranging from the subsonic to the supersonic regime.

We investigate the formation of protostellar clusters during the collapse of dense molecular cloud cores with a focus on the evolution of potential and kinetic energy, the degree of substructure, and the early phase of mass segregation. Our study is based on a series of hydrodynamic simulations of dense cores, where we vary the initial density profile and the initial turbulent velocity. In the three-dimensional adaptive mesh refinement simulations, we follow the dynamical formation of filaments and protostars until a star formation efficiency of 20%. Despite the different initial configurations, the global ensemble of all protostars in a setup shows a similar energy evolution and forms sub-virial clusters with an energy ratio $E_\mathrm{kin}/|E_\mathrm{pot}|\sim0.2$. Concentrating on the innermost central region, the clusters show a roughly virialised energy balance. However, the region of virial balance only covers the innermost $\sim10-30%$ of all the protostars. In all simulations with multiple protostars, the total kinetic energy of the protostars is higher than the kinetic energy of the gas cloud, although the protostars only contain 20% of the total mass. The clusters vary significantly in size, mass, and number of protostars, and show different degrees of substructure and mass segregation. Flat density profiles and compressive turbulent modes produce more subclusters then centrally concentrated profiles and solenoidal turbulence. We find that dynamical relaxation and hence dynamical mass segregation is very efficient in all cases from the very beginning of the nascent cluster, i.e., during a phase when protostars are constantly forming and accreting.

We investigate the impact of different initial conditions for the initial density profile and the initial turbulence on the formation process of protostellar clusters. We study the collapse of dense molecula r cloud cores with three-dimensional adaptive mesh refinement simulations. We focus our discussion on the distribution of the gas among the protostellar objects in the turbulent dynamical cores. Despite the large variations in the initial configurations and the resulting gas and cluster morphology we find that all stellar clusters follow a very similar gas accretion behaviour. Once secondary protostars begin to form, the central region of a cluster is efficiently shielded from further accretion. Hence, objects located close to the centre are starved of material, as indicated by a strong decrease of the central acc retion rate. This Fragmentation Induced Starvation occurs not only in rotationally supported discs and filaments, but also in more spherically symmetric clusters with complex chaotic motions.

The collapse of weakly turbulent prestellar cores is a critical stage in the process of star formation. Being highly non-linear and stochastic, the outcome of collapse can only be explored theoretically by performing large ensembles of numerical simulations. Standard practice is to quantify the initial turbulent velocity field in a core in terms of the amount of turbulent energy (or some equivalent) and the exponent in the power spectrum (n \equiv -d log Pk /d log k). In this paper, we present a numerical study of the influence of the details of the turbulent velocity field on the collapse of an isolated, weakly turbulent, low-mass prestellar core. We show that, as long as n > 3 (as is usually assumed), a more critical parameter than n is the maximum wavelength in the turbulent velocity field, {\lambda}_MAX. This is because {\lambda}_MAX carries most of the turbulent energy, and thereby influences both the amount and the spatial coherence of the angular momentum in the core. We show that the formation of dense filaments during collapse depends critically on {\lambda}_MAX, and we explain this finding using a force balance analysis. We also show that the core only has a high probability of fragmenting if {\lambda}_MAX > 0.5 R_CORE (where R_CORE is the core radius); that the dominant mode of fragmentation involves the formation and break-up of filaments; and that, although small protostellar disks (with radius R_DISK <= 20 AU) form routinely, more extended disks are rare. In turbulent, low-mass cores of the type we simulate here, the formation of large, fragmenting protostellar disks is suppressed by early fragmentation in the filaments.

We present a detailed parameter study of collapsing turbulent cloud cores, varying the initial density profile and the initial turbulent velocity field. We systematically investigate the influence of different initial conditions on the star formation process, mainly focusing on the fragmentation, the number of formed stars, and the resulting mass distributions. Our study compares four different density profiles (uniform, Bonnor-Ebert type, $\rho\propto r^{-1.5}$, and $\rho\propto r^{-2}$), combined with six different supersonic turbulent velocity fields (compressive, mixed, and solenoidal, initialised with two different random seeds each) in three-dimensional simulations using the adaptive-mesh refinement, hydrodynamics code FLASH. The simulations show that density profiles with flat cores produce hundreds of low-mass stars, either distributed throughout the entire cloud or found in subclusters, depending on the initial turbulence. Concentrated density profiles always lead to the formation of one high-mass star in the centre of the cloud and, if at all, low-mass stars surrounding the central one. In uniform and Bonnor-Ebert type density distributions, compressive initial turbulence leads to local collapse about 25% earlier than solenoidal turbulence. However, central collapse in the steep power-law profiles is too fast for the turbulence to have any significant influence. We conclude that (I) the initial density profile and turbulence mainly determine the cloud evolution and the formation of clusters, (II) the initial mass function (IMF) is not universal for all setups, and (III) that massive stars are much less likely to form in flat density distributions. The IMFs obtained in the uniform and Bonnor-Ebert type density profiles are more consistent with the observed IMF, but shifted to lower masses.