Solar wind measurements in the heliosphere are predominantly comprised of protons, alphas, and minor elements in a highly ionized state. The majority of low charge states, such as He$^{+}$, measured in situ are often attributed to pick up ions of non-solar origin. However, through inspection of the velocity distribution functions of near Earth measurements, we find a small but significant population of He$^+$ ions in the normal solar wind whose properties indicate that it originated from the Sun and has evolved as part of the normal solar wind. Current ionization models, largely governed by electron impact and radiative ionization and recombination processes, underestimate this population by several orders of magnitude. Therefore, to reconcile the singly ionized He observed, we investigate recombination of solar He$^{2+}$ through charge exchange with neutrals from circumsolar dust as a possible formation mechanism of solar He$^{+}$. We present an empirical profile of neutrals necessary for charge exchange to become an effective vehicle to recombine He$^{2+}$ to He$^{+}$ such that it meets observational He$^{+}$ values. We find the formation of He$^{+}$ is not only sensitive to the density of neutrals but also to the inner boundary of the neutral distribution encountered along the solar wind path. However, further observational constraints are necessary to confirm that the interaction between solar $\alpha$ particles and dust neutrals is the primary source of the He$^{+}$ observations.

We report on the discovery and validation of TOI 813b (TIC 55525572 b), a transiting exoplanet identified by citizen scientists in data from NASA's Transiting Exoplanet Survey Satellite (TESS) and the first planet discovered by the Planet Hunters TESS project. The host star is a bright (V = 10.3 mag) subgiant ($R_\star=1.94\,R_\odot$, $M_\star=1.32\,M_\odot$). It was observed almost continuously by TESS during its first year of operations, during which time four individual transit events were detected. The candidate passed all the standard light curve-based vetting checks, and ground-based follow-up spectroscopy and speckle imaging enabled us to place an upper limit of $2 M_{Jup}$ (99 % confidence) on the mass of the companion, and to statistically validate its planetary nature. Detailed modelling of the transits yields a period of $83.8911_{ - 0.0031 } ^ { + 0.0027 }$ days, a planet radius of $6.71 \pm 0.38$ $R_{\oplus}$, and a semi major axis of $0.423_{ - 0.037 } ^ { + 0.031 }$ AU. The planet's orbital period combined with the evolved nature of the host star places this object in a relatively under-explored region of parameter space. We estimate that TOI-813b induces a reflex motion in its host star with a semi-amplitude of $\sim6$ ms$^{-1}$, making this system a promising target to measure the mass of a relatively long-period transiting planet.

Astronomical observations often require the detection of faint signals in the presence of noise, and the near-infrared regime is no exception. In particular, where the application has short exposure time constraints, we are frequently and unavoidably limited by the read noise of a system. A recent and revolutionary development in detector technology is that of linear-mode avalanche photodiode (LmAPD) arrays. By the introduction of a signal multiplication region within the device, effective read noise can be reduced to <0.2 e-, enabling the detection of very small signals at frame rates of up to 1 kHz. This is already impacting ground-based astronomy in high-speed applications such as wavefront sensing and fringe tracking, but has not yet been exploited for scientific space missions. We present the current status of a collaboration with Leonardo MW - creators of the 'SAPHIRA' LmAPD array - as we work towards the first in-orbit demonstration of a SAPHIRA device in 'Emu', a hosted payload on the International Space Station. The Emu mission will fully benefit from the 'noiseless' gains offered by LmAPD technology as it produces a time delay integration photometric sky survey at 1.4 microns, using compact readout electronics developed at the Australian National University. This is just one example of a use case that could not be achieved with conventional infrared sensors.

Gaia is a revolutionary space mission developed by ESA and is delivering 5 parameter astrometry, photometry and radial velocities over the whole sky with astrometric accuracies down to a few tens of micro-arcseconds. A weakness of Gaia is that it only operates at optical wavelengths. However, much of the Galactic centre and the spiral arm regions, important for certain studies, are obscured by interstellar extinction and this makes it difficult for Gaia to deeply probe. This problem can be overcome by switching to the Near Infra-Red (NIR) but this is not possible with silicon CCDs. Additionally, to scan the entire sky and make global absolute parallax measurements the spacecraft must have a constant rotation and this requires the detectors operate in Time Delayed Integration (TDI) mode or similar.

(Abridged) This is the Maunakea Spectroscopic Explorer 2018 book. It is intended as a concise reference guide to all aspects of the scientific and technical design of MSE, for the international astronomy and engineering communities, and related agencies. The current version is a status report of MSE's science goals and their practical implementation, following the System Conceptual Design Review, held in January 2018. MSE is a planned 10-m class, wide-field, optical and near-infrared facility, designed to enable transformative science, while filling a critical missing gap in the emerging international network of large-scale astronomical facilities. MSE is completely dedicated to multi-object spectroscopy of samples of between thousands and millions of astrophysical objects. It will lead the world in this arena, due to its unique design capabilities: it will boast a large (11.25 m) aperture and wide (1.52 sq. degree) field of view; it will have the capabilities to observe at a wide range of spectral resolutions, from R2500 to R40,000, with massive multiplexing (4332 spectra per exposure, with all spectral resolutions available at all times), and an on-target observing efficiency of more than 80%. MSE will unveil the composition and dynamics of the faint Universe and is designed to excel at precision studies of faint astrophysical phenomena. It will also provide critical follow-up for multi-wavelength imaging surveys, such as those of the Large Synoptic Survey Telescope, Gaia, Euclid, the Wide Field Infrared Survey Telescope, the Square Kilometre Array, and the Next Generation Very Large Array.

In this paper we present the Australian Astronomical Observatory's concept design for Sphinx - a fiber positioned with 4332 spines on a 7.77mm pitch for CFHT's Mauna Kea Spectroscopic Explorer (MSE) Telescope. Based on the Echidna technology used with FMOS (on Subaru) and 4MOST (on VISTA), the next evolution of the tilting spine design delivers improved performance and superior allocation efficiency. Several prototypes have been constructed that demonstrate the suitability of the new design for MSE. Results of prototype testing are presented, along with an analysis of the impact of tilting spines on the overall survey efficiency. The Sphinx fiber positioned utilizes a novel metrology system for spine position feedback. The metrology design and the careful considerations required to achieve reliable, high accuracy measurements of all fibres in a realistic telescope environment are also presented.

Veloce is an ultra-stable fibre-fed R4 echelle spectrograph for the 3.9 m Anglo-Australian Telescope. The first channel to be commissioned, Veloce 'Rosso', utilises multiple low-cost design innovations to obtain Doppler velocities for Sun-like and M-dwarf stars at <1 m/s precision. The spectrograph has an asymmetric white-pupil format with a 100-mm beam diameter, delivering R>75,000 spectra over a 580-950 nm range for the Rosso channel. Simultaneous calibration is provided by a single-mode pulsed laser frequency comb in tandem with a traditional arc lamp. A bundle of 19 object fibres provides a 2.4" field of view for full sampling of stellar targets from the AAT site. Veloce is housed in dual environmental enclosures that maintain positive air pressure at a stability of +/-0.3 mbar, with a thermal stability of +/-0.01 K on the optical bench. We present a technical overview and early performance data from Australia's next major spectroscopic machine.

Starbugs are miniature piezoelectric walking robots that can be operated in parallel to position many payloads like optical fibers across a telescopes focal plane. They consist of two concentric piezoelectric ceramic tubes that walk with micron step size. In addition to individual optical fibers, Starbugs have moved a payload of 0.75kg at several millimeters per second. The Australian Astronomical Observatory previously developed prototype devices and tested them in the laboratory. Now we are optimizing the Starbug design for production and deployment in the TAIPAN instrument, which will be capable of configuring 300 optical fibers over a six degree field-of-view on the UK Schmidt Telescope within a few minutes. The TAIPAN instrument will demonstrate the technology and capability for MANIFEST (Many Instrument Fiber-System) proposed for the Giant Magellan Telescope. Design is addressing: connector density and voltage limitations, mechanical reliability and construction repeatability, field plate residues and scratching, metrology stability, and facilitation of improved motion in all aspects of the design for later evaluation. Here we present the new design features of the AAO TAIPAN Starbug.

With the discovery of gravitational waves (GW), attention has turned towards detecting counterparts to these sources. In discussions on counterpart signatures and multi-messenger follow-up strategies to GW detections, ultra-violet (UV) signatures have largely been neglected, due to UV facilities being limited to SWIFT, which lacks high-cadence UV survey capabilities. In this paper, we examine the UV signatures from merger models for the major GW sources, highlighting the need for further modelling, while presenting requirements and a design for an effective UV survey telescope. Using $u'$-band models as an analogue, we find that a UV survey telescope requires a limiting magnitude of m$_{u'}\rm (AB)\approx 24$ to fully complement the aLIGO range and sky localisation. We show that a network of small, balloon-based UV telescopes with a primary mirror diameter of 30~cm could be capable of covering the aLIGO detection distance from $\sim$60--100\% for BNS events and $\sim$40\% for BHNS events. The sensitivity of UV emission to initial conditions suggests that a UV survey telescope would provide a unique dataset, that can act as an effective diagnostic to discriminate between models.

The GraphBLAS standard (GraphBlas.org) is being developed to bring the potential of matrix based graph algorithms to the broadest possible audience. Mathematically the Graph- BLAS defines a core set of matrix-based graph operations that can be used to implement a wide class of graph algorithms in a wide range of programming environments. This paper provides an introduction to the mathematics of the GraphBLAS. Graphs represent connections between vertices with edges. Matrices can represent a wide range of graphs using adjacency matrices or incidence matrices. Adjacency matrices are often easier to analyze while incidence matrices are often better for representing data. Fortunately, the two are easily connected by matrix mul- tiplication. A key feature of matrix mathematics is that a very small number of matrix operations can be used to manipulate a very wide range of graphs. This composability of small number of operations is the foundation of the GraphBLAS. A standard such as the GraphBLAS can only be effective if it has low performance overhead. Performance measurements of prototype GraphBLAS implementations indicate that the overhead is low.

The Australian Astronomical Observatory's 'tilting spine' fibre positioning technology has been redeveloped to provide superior performance in a smaller package. The new design offers demonstrated closed-loop positioning errors of 2.8 {\mu}m RMS in only five moves (~10 s excluding metrology overheads) and an improved capacity for open-loop tracking during observations. Tilt-induced throughput losses have been halved by lengthening spines while maintaining excellent accuracy. New low-voltage multilayer piezo actuator technology has reduced a spine's peak drive amplitude from ~150 V to <10 V, simplifying the control electronics design, reducing the system's overall size, and improving modularity. Every spine is now a truly independent unit with a dedicated drive circuit and no restrictions on the timing or direction of fibre motion.

This paper discusses a new approach for determining the calibration parameters of independently-actuated optical fibers in multi-object astronomical fiber positioning systems. This work comes from the development of a new type of piezoelectric motor intended to enhance the 'tilting spine' fiber positioning technology originally created by the Australian Astronomical Observatory. Testing has shown that the motor's performance can vary depending on the fiber's location within its accessible field, meaning that an individual fiber is difficult calibrate with a one-time routine. Better performance has resulted from constantly updating calibration parameters based on the observed movements of the fiber during normal closed-loop positioning. Over time, location-specific historical data is amassed that can be used to better predict the results of a future fiber movement. This is similar to a technique previously proposed by the Australian Astronomical Observatory, but with the addition of location-specific learning. Results from a prototype system are presented, showing a significant reduction in overall positioning error when using this new approach.

WEAVE is a 1000-fiber multi-object spectroscopic facility for the 4.2~m William Herschel Telescope. It will feature a double-headed pick-and-place fiber positioning robot comprising commercially available robotic axes. This paper presents results on the performance of these axes, obtained by testing a prototype system in the laboratory. Positioning accuracy is found to be better than the manufacturer's published values for the tested cases, indicating that the requirement for a maximum positioning error of 8.0~microns is achievable. Field reconfiguration times well within the planned 60 minute observation window are shown to be likely when individual axis movements are combined in an efficient way.

We use ACE/SWICS elemental composition data to compare the variations in solar wind fractionation as measured by SWICS during the last solar maximum (1999-2001), the solar minimum (2006-2009) and the period in which the Genesis spacecraft was collecting solar wind (late 2001 - early 2004). We differentiate our analysis in terms of solar wind regimes (i.e. originating from interstream or coronal hole flows, or coronal mass ejecta). Abundances are normalized to the low-FIP ion magnesium to uncover correlations that are not apparent when normalizing to high-FIP ions. We find that relative to magnesium, the other low-FIP elements are measurably fractionated, but the degree of fractionation does not vary significantly over the solar cycle. For the high-FIP ions, variation in fractionation over the solar cycle is significant: greatest for Ne/Mg and C/Mg, less so for O/Mg, and the least for He/Mg. When abundance ratios are examined as a function of solar wind speed, we find a strong correlation, with the remarkable observation that the degree of fractionation follows a mass-dependent trend. We discuss the implications for correcting the Genesis sample return results to photospheric abundances.

We present an overview of and status report on the WEAVE next-generation spectroscopy facility for the William Herschel Telescope (WHT). WEAVE principally targets optical ground-based follow up of upcoming ground-based (LOFAR) and space-based (Gaia) surveys. WEAVE is a multi-object and multi-IFU facility utilizing a new 2-degree prime focus field of view at the WHT, with a buffered pick-and-place positioner system hosting 1000 multi-object (MOS) fibres, 20 integral field units, or a single large IFU for each observation. The fibres are fed to a single spectrograph, with a pair of 8k(spectral) x 6k (spatial) pixel cameras, located within the WHT GHRIL enclosure on the telescope Nasmyth platform, supporting observations at R~5000 over the full 370-1000nm wavelength range in a single exposure, or a high resolution mode with limited coverage in each arm at R~20000. The project is now in the final design and early procurement phase, with commissioning at the telescope expected in 2017.

We report here on the software Hack Day organised at the 2014 SPIE conference on Astronomical Telescopes and Instrumentation in Montreal. The first ever Hack Day to take place at an SPIE event, the aim of the day was to bring together developers to collaborate on innovative solutions to problems of their choice. Such events have proliferated in the technology community, providing opportunities to showcase, share and learn skills. In academic environments, these events are often also instrumental in building community beyond the limits of national borders, institutions and projects. We show examples of projects the participants worked on, and provide some lessons learned for future events.

The Australian Astronomical Observatory has extensively prototyped a new robotic positioner to allow simultaneous positioning of optical fibers at the focal plane called 'Starbugs'. The Starbug devices each consist of two concentric piezoelectric tubes that 'walk' the optical fiber over the focal plane to accuracy of several microns. Ongoing research has led to the development of several Starbug prototypes, but lack of performance data has hampered further progress in the design of the Starbug positioners and the support equipment required to power and control them. Furthermore, Starbugs have been selected for the TAIPAN instrument, a prototype for MANIFEST on the GMT. A need now arises to measure and characterize 100's of piezoelectric tubes before full scale production of Starbugs for TAIPAN. The manual measurements of these piezoelectric tubes are a time consuming process taking several hours. Therefore, a versatile automated system is needed to measure and characterize these tubes in the laboratory before production of Starbugs. We have solved this problem with the design of an automated LabVIEW application that significantly reduces test times to several minutes. We present the various design aspects of the automation system and provide analyses of example piezoelectric tubes for Starbugs.

Starbugs are miniature piezoelectric 'walking' robots with the ability to simultaneously position many optical fibres across a telescope's focal plane. Their simple design incorporates two piezoceramic tubes to form a pair of concentric 'legs' capable of taking individual steps of a few microns, yet with the capacity to move a payload several millimetres per second. The Australian Astronomical Observatory has developed this technology to enable fast and accurate field reconfigurations without the inherent limitations of more traditional positioning techniques, such as the 'pick and place' robotic arm. We report on our recent successes in demonstrating Starbug technology, driven principally by R&D efforts for the planned MANIFEST (many instrument fibre-system) facility for the Giant Magellan Telescope. Significant performance gains have resulted from improvements to the Starbug system, including i) the use of a vacuum to attach Starbugs to the underside of a transparent field plate, ii) optimisation of the control electronics, iii) a simplified mechanical design with high sensitivity piezo actuators, and iv) the construction of a dedicated laboratory 'test rig'. A method of reliably rotating Starbugs in steps of several arcminutes has also been devised, which integrates with the pre-existing x-y movement directions and offers greater flexibility while positioning. We present measured performance data from a prototype system of 10 Starbugs under full (closed-loop control), at field plate angles of 0-90 degrees.

We present an extensive search for RR Lyrae stars in and around the ultra-faint Milky Way companions Segue 2 and Segue 3. The former (M_V = -2.5, Belokurov et al. 2009) appears to be an extremely faint dwarf galaxy companion of the Milky Way. The latter (M_V = 0.0, Fadely et al. 2011) is among the faintest star clusters known. We use B and V band time-series imaging obtained at the WIYN 0.9 meter telescope at Kitt Peak National Observatory to search for RR Lyrae in these objects. In our Segue 2 observations, we present a previously unknown fundamental mode (RRab) RR Lyrae star with a period of P_ab = 0.748 days. With this measurement, we revisit the inverse correlation between <P_ab> and <[Fe/H]> established in the literature for Milky Way dwarf galaxies and their RR Lyrae. In this context, the long period of Segue 2's RRab star as well as the known significant spread in metallicity in this dwarf galaxy are consistent with the observed trend in <P_ab> and <[Fe/H]>. We derive the first robust distance to Segue 2, using both its RRab star and spectroscopically confirmed blue horizontal branch stars. Using [Fe/H] = -2.16 and -2.44 dex, we find d_RRL = 36.6 +2.5/-2.4 and 37.7 +/- 2.7 kpc; assuming [Fe/H] = -2.257 dex, we find d_BHB = 34.4 +/- 2.6 kpc. Although no RR Lyrae were present in the Segue 3 field, we found a candidate eclipsing binary star system.

We present a concept for a 4000-fibre positioner for DESpec, based on the Echidna 'tilting spine' technology. The DESpec focal plane is 450mm across and curved, and the required pitch is ~6.75mm. The size, number of fibers and curvature are all comparable with various concept studies for similar instruments already undertaken at the AAO, but present new challenges in combination. A simple, low-cost, and highly modular design is presented, consisting of identical modules populated by identical spines. No show-stopping issues in accommodating either the curvature or the smaller pitch have been identified, and the actuators consist largely of off-the-shelf components. The actuators have been prototyped at AAO, and allow reconfiguration times of ~15s to reach position errors 7 microns or less. Straightforward designs for metrology, acquisition, and guiding are also proposed. The throughput losses of the entire positioner system are estimated to be ~15%, of which 6.3% is attributable to the tilting-spine technology.

Blue primordial power spectra with a spectral index $n>1$ can lead to a significant production of primordial black holes in the very early Universe. The evaporation of these objects leads to a number of observational consequences and a model independent upper limit of $n \approx 1.4$. In some cases this limit is strengthened to $n=1.3$. Such limits may be employed to define the boundary to the region of parameter space consistent with generalized inflationary predictions. [To appear in Proceedings of the CASE WESTERN CMB WORKSHOP, April 22-24 1994. Figures available on request from J.H.Gilbert@qmw.ac.uk]

Blue primordial power spectra have spectral index $n>1$ and arise naturally in the recently proposed hybrid inflationary scenario. An observational upper limit on {\em n} is derived by normalizing the spectrum at the quadrupole scale and considering the possible overproduction of Planck mass relics formed in the final stage of primordial black hole evaporation. In the inflationary Universe with the maximum reheating temperature compatible with the observed quadrupole anisotropy, the upper limit is $n=1.4$, but it is slightly weaker for lower reheat temperatures. This limit applies over 57 decades of mass and is therefore insensitive to cosmic variance and any gravitational wave contribution to the quadrupole anisotropy. It is also independent of the dark matter content of the Universe and therefore the bias parameter. In some circumstances, there may be an extended dust-like phase between the end of inflation and reheating. In this case, primordial black holes form more abundantly and the upper limit is $n=1.3$.