The New Horizons mission was launched on 2006 January 19, and the spacecraft is heading for a flyby encounter with the Pluto system in the summer of 2015. The challenges associated with sending a spacecraft to Pluto in less than 10 years and performing an ambitious suite of scientific investigations at such large heliocentric distances (> 32 AU) are formidable and required the development of lightweight, low power, and highly sensitive instruments. This paper provides an overview of the New Horizons science payload, which is comprised of seven instruments. Alice provides spatially resolved ultraviolet spectroscopy. The Ralph instrument has two components: the Multicolor Visible Imaging Camera (MVIC), which performs panchromatic and color imaging, and the Linear Etalon Imaging Spectral Array (LEISA), which provides near-infrared spectroscopic mapping capabilities. The Radio Experiment (REX) is a component of the New Horizons telecommunications system that provides both occultation and radiometry capabilities. The Long Range Reconnaissance Imager (LORRI) provides high sensitivity, high spatial resolution optical imaging capabilities. The Solar Wind at Pluto (SWAP) instrument measures the density and speed of solar wind particles. The Pluto Energetic Particle Spectrometer Science Investigation (PEPSSI) measures energetic protons and CNO ions. The Venetia Burney Student Dust Counter (VB-SDC) is used to record dust particle impacts during the cruise phases of the mission.

The New Horizons spacecraft was launched on 19 January 2006. The spacecraft was designed to provide a platform for seven instruments that will collect and return data from Pluto in 2015. The design drew on heritage from previous missions developed at The Johns Hopkins University Applied Physics Laboratory (APL) and other missions such as Ulysses. The trajectory design imposed constraints on mass and structural strength to meet the high launch acceleration needed to reach the Pluto system prior to the year 2020. The spacecraft subsystems were designed to meet tight mass and power allocations, yet provide the necessary control and data handling finesse to support data collection and return when the one-way light time during the Pluto flyby is 4.5 hours. Missions to the outer solar system require a radioisotope thermoelectric generator (RTG) to supply electrical power, and a single RTG is used by New Horizons. To accommodate this constraint, the spacecraft electronics were designed to operate on less than 200 W. The spacecraft system architecture provides sufficient redundancy to provide a probability of mission success of greater than 0.85, even with a mission duration of over 10 years. The spacecraft is now on its way to Pluto, with an arrival date of 14 July 2015. Initial inflight tests have verified that the spacecraft will meet the design requirements.