Normalized to: Ghigo, M.
[1]
oai:arXiv.org:1906.05648 [pdf] - 2007228
Thin glass shells for active optics for future space telescopes
Submitted: 2019-06-13
We present a method for the manufacturing of thin shells of glass, which
appears promising for the development of active optics for future space
telescopes. The method exploits the synergy of different mature technologies,
while leveraging the commercial availability of large, high-quality sheets of
glass, with thickness up to few millimeters. The first step of the method
foresees the pre-shaping of flat substrates of glass by replicating the
accurate shape of a mold via hot slumping technology. The replication concept
is advantageous for making large optics composed of many identical or similar
segments. After the hot slumping, the shape error residual on the optical
surface is addressed by applying a deterministic sub-aperture technology as
computer-controlled bonnet polishing and/or ion beam figuring. Here we focus on
the bonnet polishing case, during which the thin, deformable substrate of glass
is temporary stiffened by a removable holder. In this paper, we report on the
results so far achieved on a 130 mm glass shell case study.
[2]
oai:arXiv.org:1807.01362 [pdf] - 1710699
To PLAnetary Transit Or NOT? An extremely large field of view camera
with a CaF2 component tested in thermo-vacuum
Bergomi, M.;
Magrin, D.;
Farinato, J.;
Viotto, V.;
Ragazzoni, R.;
Brunelli, A.;
Dima, M.;
Christiansen, P.;
Ghigo, M.;
Laubiere, D.;
Pasquiere, H.;
Piazza, D.;
Pagano, I.;
Piotto, G.;
Basile, G.;
Catala, C.
Submitted: 2018-07-03
Because of its nicely chromatic behavior, Calcium Fluoride (CaF2) is a nice
choice for an optical designer as it can easily solve a number of issues,
giving the right extra degree of freedom in the optical design tuning. However,
switching from tablet screens to real life, the scarcity of information -and
sometimes the bad reputation in term of fragility- about this material makes an
overall test much more than a "display determination" experiment. We describe
the extensive tests performed in ambient temperature and in thermo-vacuum of a
prototype, consistent with flight CTEs, of a 200mm class camera envisaged for
the PLATO (PLAnetary Transit and Oscillations of Stars) mission. We show how
the CaF2 lens uneventfully succeeded to all the tests and handling procedures,
and discuss the main results of the very intensive test campaign of the PLATO
Telescope Optical Unit prototype.
[3]
oai:arXiv.org:1610.09258 [pdf] - 1504566
Design and advancement status of the Beam Expander Testing X-ray
facility (BEaTriX)
Spiga, D.;
Pelliciari, C.;
Salmaso, B.;
Arcangeli, L.;
Bianucci, G.;
Ferrari, C.;
Ghigo, M.;
Pareschi, G.;
Rossi, M.;
Tagliaferri, G.;
Valsecchi, G.;
Vecchi, G.;
Zappettini, A.
Submitted: 2016-10-28
The BEaTriX (Beam Expander Testing X-ray facility) project is an X-ray
apparatus under construction at INAF/OAB to generate a broad (200 x 60 mm2),
uniform and low-divergent X-ray beam within a small lab (6 x 15 m2). BEaTriX
will consist of an X-ray source in the focus a grazing incidence paraboloidal
mirror to obtain a parallel beam, followed by a crystal monochromation system
and by an asymmetrically-cut diffracting crystal to perform the beam expansion
to the desired size. Once completed, BEaTriX will be used to directly perform
the quality control of focusing modules of large X-ray optics such as those for
the ATHENA X-ray observatory, based on either Silicon Pore Optics (baseline) or
Slumped Glass Optics (alternative), and will thereby enable a direct quality
control of angular resolution and effective area on a number of mirror modules
in a short time, in full X-ray illumination and without being affected by the
finite distance of the X-ray source. However, since the individual mirror
modules for ATHENA will have an optical quality of 3-4 arcsec HEW or better,
BEaTriX is required to produce a broad beam with divergence below 1-2 arcsec,
and sufficient flux to quickly characterize the PSF of the module without being
significantly affected by statistical uncertainties. Therefore, the optical
components of BEaTriX have to be selected and/or manufactured with excellent
optical properties in order to guarantee the final performance of the system.
In this paper we report the final design of the facility and a detailed
performance simulation.
[5]
oai:arXiv.org:1509.02298 [pdf] - 1273356
Profile reconstruction of grazing-incidence X-ray mirrors from
intra-focal X-ray full imaging
Spiga, D.;
Basso, S.;
Bavdaz, M.;
Burwitz, V.;
Civitani, M.;
Citterio, O.;
Ghigo, M.;
Hartner, G.;
Menz, B.;
Pareschi, G.;
Proserpio, L.;
Salmaso, B.;
Tagliaferri, G.;
Wille, E.
Submitted: 2015-09-08
The optics of a number of future X-ray telescopes will have very long focal
lengths (10 - 20 m), and will consist of a number of nested/stacked thin,
grazing-incidence mirrors. The optical quality characterization of a real
mirror can be obtained via profile metrology, and the Point Spread Function of
the mirror can be derived via one of the standard computation methods. However,
in practical cases it can be difficult to access the optical surfaces of
densely stacked mirror shells, after they have been assembled, using the
widespread metrological tools. For this reason, the assessment of the imaging
resolution of a system of mirrors is better obtained via a direct,
full-illumination test in X-rays. If the focus cannot be reached, an
intra-focus test can be performed, and the image can be compared with the
simulation results based on the metrology, if available. However, until today
no quantitative information was extracted from a full-illumination, intra-focal
exposure. In this work we show that, if the detector is located at an optimal
distance from the mirror, the intensity variations of the intra-focal,
full-illumination image in single reflection can be used to reconstruct the
profile of the mirror surface, without the need of a wavefront sensor. The
Point Spread Function can be subsequently computed from the reconstructed
mirror shape. We show the application of this method to an intra-focal (8 m
distance from mirror) test performed at PANTER on an optical module prototype
made of hot-slumped glass foils with a 20 m focal length, from which we could
derive an expected imaging quality near 16 arcsec HEW.
[6]
oai:arXiv.org:1502.03308 [pdf] - 1303946
Development of mirrors made of chemically tempered glass foils for
future X-ray telescopes
Submitted: 2015-02-11
Thin slumped glass foils are considered good candidates for the realization
of future X-ray telescopes with large effective area and high spatial
resolution. However, the hot slumping process affects the glass strength, and
this can be an issue during the launch of the satellite because of the high
kinematical and static loads occurring during that phase. In the present work
we have investigated the possible use of Gorilla glass (produced by Corning), a
chemical tempered glass that, thanks to its strength characteristics, would be
ideal. The un-tempered glass foils were curved by means of an innovative hot
slumping technique and subsequently chemically tempered. In this paper we show
that the chemical tempering process applied to Gorilla glass foils does not
affect the surface micro-roughness of the mirrors. On the other end, the stress
introduced by the tempering process causes a reduction in the amplitude of the
longitudinal profile errors with a lateral size close to the mirror length. The
effect of the overall shape changes in the final resolution performance of the
glass mirrors was studied by simulating the glass foils integration with our
innovative approach based on glass reinforcing ribs. The preliminary tests
performed so far suggest that this approach has the potential to be applied to
the X-ray telescopes of the next generation.
[7]
oai:arXiv.org:1402.3445 [pdf] - 1203354
Evaluation of the surface strength of glass plates shaped by hot
slumping process
Proserpio, L.;
Basso, S.;
Borsa, F.;
Citterio, O.;
Civitani, M.;
Ghigo, M.;
Pareschi, G.;
Salmaso, B.;
Sironi, G.;
Spiga, D.;
Tagliaferri, G.;
D'Este, A.;
Dall'Igna, R.;
Silvestri, M.;
Parodi, G.;
Martelli, F.;
Bavdaz, M.;
Wille, E.
Submitted: 2014-02-14, last modified: 2014-07-09
The Hot Slumping Technology is under development by several research groups
in the world for the realization of grazing-incidence segmented mirrors for
X-ray astronomy, based on thin glass plates shaped over a mould at temperatures
above the transformation point. The performed thermal cycle and related
operations might have effects on the strength characteristics of the glass,
with consequences on the structural design of the elemental optical modules and
consecutively on the entire X-ray optic for large astronomical missions like
IXO and ATHENA. The mechanical strength of glass plates after they underwent
the slumping process was tested through destructive double-ring tests in the
context of a study performed by the Astronomical Observatory of Brera with the
collaboration of Stazione Sperimentale del Vetro and BCV Progetti. The entire
study has been realized on more than 200 D263 Schott borosilicate glass
specimens of dimension 100 mm x 100 mm and thickness 0.4 mm, either flat or
bent at a Radius of Curvature of 1000 mm through the particular pressure
assisted hot slumping process developed by INAF-OAB. The collected experimental
data have been compared to non-linear FEM analyses and treated with Weibull
statistic to assess the current IXO glass X-ray telescope design, in terms of
survival probability, when subject to static and acoustic loads characteristic
of the launch phase. The paper describes the activities performed and presents
the obtained results.
[9]
oai:arXiv.org:1307.5671 [pdf] - 696181
The ASTRI Mini-Array Science Case
Vercellone, S.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Misto', A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Zitelli, V.;
Tavecchio, F.
Submitted: 2013-07-22
ASTRI is a Flagship Project financed by the Italian Ministry of Education,
University and Research, and led by INAF, the Italian National Institute of
Astrophysics. Within this framework, INAF is currently developing an end-to-end
prototype of a Small Size Telescope in a dual-mirror configuration (SST-2M) for
the Cherenkov Telescope Array (CTA), scheduled to start data acquisition in
2014. Although the ASTRI SST-2M prototype is mainly a technological
demonstrator, it will perform scientific observations of the Crab Nebula, Mrk
421 and Mrk 501 at E>1 TeV. A remarkable improvement in terms of performance
could come from the operation, in 2016, of a SST-2M mini-array, composed of a
few SST-2M telescopes to be placed at final CTA Southern Site. The SST
mini-array will be able to study in great detail relatively bright sources (a
few x 10E-12 erg/cm2/s at 10 TeV) with angular resolution of a few arcmin and
energy resolution of about 10-15%. Thanks to the stereo approach, it will be
possible to verify the wide field of view (FoV) performance through the
detections of very high-energy showers with core located at a distance up to
500 m, to compare the mini-array performance with the Monte Carlo expectations
by means of deep observations of selected targets, and to perform the first CTA
science at the beginning of the mini-array operations. Prominent sources such
as extreme blazars, nearby well-known BL Lac objects and radio-galaxies,
galactic pulsar wind nebulae, supernovae remnants, micro-quasars, and the
Galactic Center can be observed in a previously unexplored energy range, in
order to investigate the electron acceleration and cooling, relativistic and
non relativistic shocks, the search for cosmic-ray (CR) Pevatrons, the study of
the CR propagation, and the impact of the extragalactic background light on the
spectra of the sources.
[10]
oai:arXiv.org:1307.4962 [pdf] - 1943149
The dual-mirror Small Size Telescope for the Cherenkov Telescope Array
Pareschi, G.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.;
Amans, J. P.;
Boisson, C.;
Costille, C.;
Dournaux, J. L.;
Dumas, D.;
Fasola, G.;
Hervet, O.;
Huet, J. M.;
Laporte, P.;
Rulten, C.;
Sol, H.;
Zech, A.;
White, R.;
Hinton, J.;
Ross, D.;
Sykes, J.;
Ohm, S.;
Schmoll, J.;
Chadwick, P.;
Greenshaw, T.;
Daniel, M.;
Cotter, G.;
Varner, G. S.;
Funk, S.;
Vandenbroucke, J.;
Sapozhnikov, L.;
Buckley, J.;
Moore, P.;
Williams, D.;
Markoff, S.;
Vink, J.;
Berge, D.;
Hidaka, N.;
Okumura, A.;
Tajima, H.
Submitted: 2013-07-18
In this paper, the development of the dual mirror Small Size Telescopes (SST)
for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a
primary mirror diameter of 4 m, will be produced and installed at the CTA
southern site. These will allow investigation of the gamma-ray sky at the
highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV.
The telescope presented in this contribution is characterized by two major
innovations: the use of a dual mirror Schwarzschild-Couder configuration and of
an innovative camera using as sensors either multi-anode photomultipliers
(MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the
telescope, achieved with the dual-mirror optics, allows the camera to be
compact (40 cm in diameter), and low-cost. The camera, which has about 2000
pixels of size 6x6 mm^2, covers a field of view of 10{\deg}. The dual mirror
telescopes and their cameras are being developed by three consortia, ASTRI
(Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE
(Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High
Energy Camera, universities in UK, US and Japan) which are merging their
efforts in order to finalize an end-to-end design that will be constructed for
CTA. A number of prototype structures and cameras are being developed in order
to investigate various alternative designs. In this contribution, these designs
are presented, along with the technological solutions under study.
[11]
oai:arXiv.org:1307.5006 [pdf] - 695205
Expected performance of the ASTRI-SST-2M telescope prototype
Bigongiari, C.;
Di Pierro, F.;
Morello, C.;
Stamerra, A.;
Vallania, P.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vercellone, S.;
Zitelli, V.;
Arrabito, L.;
Bernlohr, K.;
Maier, G.;
Komin, N.;
Consortium, The Cta
Submitted: 2013-07-18
ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is an
Italian flagship project pursued by INAF (Istituto Nazionale di Astrofisica)
strictly linked to the development of the Cherenkov Telescope Array, CTA.
Primary goal of the ASTRI program is the design and production of an end-to-end
prototype of a Small Size Telescope for the CTA sub-array devoted to the
highest gamma-ray energy region. The prototype, named ASTRI SST-2M, will be
tested on field in Italy during 2014. This telescope will be the first
Cherenkov telescope adopting the double reflection layout in a
Schwarzschild-Couder configuration with a tessellated primary mirror and a
monolithic secondary mirror. The collected light will be focused on a compact
and light-weight camera based on silicon photo-multipliers covering a 9.6 deg
full field of view. Detailed Monte Carlo simulations have been performed to
estimate the performance of the planned telescope. The results regarding its
energy threshold, sensitivity and angular resolution are shown and discussed.
[12]
oai:arXiv.org:1307.3992 [pdf] - 692792
Towards the ASTRI mini-array
Di Pierro, F.;
Bigongiari, C.;
Morello, C.;
Stamerra, A.;
Vallania, P.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Misto, A.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vercellone, S.;
Zitelli, V.;
Consortium, The Cta
Submitted: 2013-07-15
The Cherenkov Telescope Array (CTA) will consist of an array of three types
of telescopes covering a wide energy range, from tens of GeV up to more than
100 TeV. The high energy section (> 3 TeV) will be covered by the Small Size
Telescopes (SST). ASTRI (Astrofisica con Specchi a Tecnologia Replicante
Italiana) is a flagship project of the Italian Ministry of Research and
Education led by INAF, aiming at the design and construction of a prototype of
the Dual Mirror SST. In a second phase the ASTRI project foresees the
installation of the first elements of the SST array at the CTA southern site, a
mini-array of 5-7 telescopes. The optimization of the layout of this mini-array
embedded in the SST array of the CTA Observatory has been the object of an
intense simulation effort. In this work we present the expected mini-array
performance in terms of energy threshold, angular and energy resolution and
sensitivity.
[13]
oai:arXiv.org:1304.6559 [pdf] - 664149
The ASTRI Project: a mini-array of dual-mirror small Cherenkov
telescopes for CTA
La Palombara, N.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Mistó, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.
Submitted: 2013-04-24, last modified: 2013-05-15
ASTRI is a flagship project of the Italian Ministry of Education, University
and Research, which aims to develop an end-to-end prototype of the CTA
small-size telescope. The proposed design is characterized by a dual-mirror
Schwarzschild-Couder configuration and a camera based on Silicon
photo-multipliers, two challenging but innovative technological solutions which
will be adopted for the first time on a Cherenkov telescope. Here we describe
the current status of the project, the expected performance and the possibility
to realize a mini-array composed by a few small-size telescopes, which shall be
placed at the final CTA Southern Site.
[14]
oai:arXiv.org:0906.4114 [pdf] - 25532
The Next Generation of Cherenkov Telescopes. A White Paper for the
Italian National Institute for Astrophysics (INAF)
Antonelli, L. A.;
Blasi, P.;
Bonanno, G.;
Catalano, O.;
Covino, S.;
De Angelis, A.;
De Lotto, B.;
Ghigo, M.;
Ghisellini, G.;
Israel, G. L.;
La Barbera, A.;
Pareschi, G.;
Persic, M.;
Roncadelli, M.;
Sacco, B.;
Salvati, M.;
Tavecchio, F.;
Vallania, P.
Submitted: 2009-06-22
Motivated by the recent challenging results from TeV astronomy, the VHE INAF
community asked a group of them to write this White Paper to summarize the
status and future of Cherenkov telescopes for gamma-ray astronomy and the INAF
perspectives in this field. This document wants to review both the scientific
topics and potential developments of the field as well as to point out both the
interests and the capacities (scientific and technical) of the VHE astrophysics
community in INAF. It is aimed at identifying the scientific and technological
areas where INAF should focus its efforts and resources so that Italian
researchers can achieve (or maintain) a leading position in this field.
[15]
oai:arXiv.org:0709.1372 [pdf] - 4761
The reflecting surface of the MAGIC-II Telescope
Bastieri, D.;
Arnold, J.;
Baixeras, C.;
Citterio, O.;
Dazzi, F.;
De Lotto, B.;
Doro, M.;
Ghigo, M.;
Giro, E.;
Goebel, F.;
Kosyra, R.;
Lorenz, E.;
Mariotti, M.;
Mirzoyan, R.;
Paoletti, R.;
Pareschi, G.;
Pascoli, D.;
Pepato, A.;
Peruzzo, L.;
Saggion, A.;
Sartori, P.;
Sillanpää, A.
Submitted: 2007-09-10
The MAGIC Collaboration is building a second telescope, MAGIC II, improving
the design of the current MAGIC Telescope. MAGIC II is being built at 85 m of
distance from MAGIC I, and will also feature a huge reflecting surface of ~240
m$^2$ of area. One of the improvement is the design for the mirror of MAGIC II,
that are lighter and larger, being square of 1 m of side and weighting around
15 kg. For the development and production of the new mirrors, two different
techniques, both reliable and affordable in price, were selected: the diamond
milling of aluminium surfaces and the cold slumping of thin glass panes. As
tests for the second one are still ongoing, we present a description of the
diamond milling technique, and its application and performance to the produced
mirrors.
[16]
oai:arXiv.org:astro-ph/0603763 [pdf] - 1233771
Challenges in optics for Extremely Large Telescope instrumentation
Spanò, P.;
Zerbi, F. M.;
Norrie, C. J.;
Cunningham, C. R.;
Strassmeier, K. G.;
Bianco, A.;
Blanche, P. A.;
Bougoin, M.;
Ghigo, M.;
Hartmann, P.;
Zago, L.;
Atad-Ettedgui, E.;
Delabre, B.;
Dekker, H.;
Melozzi, M.;
Snyders, B.;
Takke, R.;
Walker, D. D.
Submitted: 2006-03-28
We describe and summarize the optical challenges for future instrumentation
for Extremely Large Telescopes (ELTs). Knowing the complex instrumental
requirements is crucial for the successful design of 30-60m aperture
telescopes. After all, the success of ELTs will heavily rely on its
instrumentation and this, in turn, will depend on the ability to produce large
and ultra-precise optical components like light-weight mirrors, aspheric
lenses, segmented filters, and large gratings. New materials and manufacturing
processes are currently under study, both at research institutes and in
industry. In the present paper, we report on its progress with particular
emphasize on volume-phase-holographic gratings, photochromic materials,
sintered silicon-carbide mirrors, ion-beam figuring, ultra-precision surfaces,
and free-form optics. All are promising technologies opening new degrees of
freedom to optical designers. New optronic-mechanical systems will enable
efficient use of the very large focal planes. We also provide exploratory
descriptions of "old" and "new" optical technologies together with suggestions
to instrument designers to overcome some of the challenges placed by ELT
instrumentation.
[17]
oai:arXiv.org:astro-ph/9711027 [pdf] - 99160
Final performances of the X-ray Mirrors of the JET-X telescope
Poretti, E.;
Campana, S.;
Citterio, O.;
Conconi, P.;
Ghigo, M.;
Mazzoleni, F.;
Tagliaferri, G.;
Cusumano, G.;
La Rosa, G.;
Brauninger, W.;
Burkert, W.;
Castelli, C. M.;
Willingale, R.
Submitted: 1997-11-04
The Joint European Telesscope (JET-X) is one of the core scientific
instruments of the SPECTRUM-X-Gamma mission. JET-X was designed to study X-ray
emissions in the band 0.3-10 KeV. Its angular resolution is better than 20
arcsec; the values of the effective areas are 161 cm2 at 1.5 KeV and 69 cm2 at
8 Kev (for one telescope). The value of the HEW circle in function of the
off-axis angle is presented; it is found to be below 20 arcsec at 1.5 Kev and
around 23 arcsec at 8 KeV up to an off-axis angle of 12 arcmin.
