Hydrodynamics and magnetohydrodynamic simulations of hot accretion flow have indicated that there is an inward decreasing of mass accretion rate with decreasing radius. Consequently, we have a flatter density profile ($\rho \propto r^{-p}$ with $p\propto 1.5-s$ in the case of $\dot{M}\propto r^{s}$, $0 \leq s<1$) compared to the case of a constant accretion rate (($\rho \propto r^{-\frac{3}{2}}$). In order to describe this behavior two models have been proposed: inflow-outflow solution and convection-dominated accretion flows. We have studied the properties of a hot accretion flow in the presence of convection, large scale magnetic field and outflow. We consider an axisymmetric viscous flow in the steady state. We used the self-similar solutions to solve the 1.5 dimensional inflow-outflow equations. We have assumed that the convection as a free parameter in our model for simplicity. We have considered two components of magnetic field (toroidal and vertical) in this paper. We have shown that the strong convection makes the inflow accretes and rotates slower while it becomes hotter and thicker. We have found that the thickness of the disc deviates from non-convective solutions obviously. We have represented that two components of magnetic field have the opposite effects on the thickness of the disc and similar effects on the radial and angular velocities of the flow.

We examine the effects of a global magnetic field and outflow on radiatively inefficient accretion flow (RIAF) in the presence of magnetic resistivity. We find a self-similar solutions for the height integrated equations that govern the behavior of the flow. We use the mixing length mechanism for studying the convection parameter. We adopt a radius dependent mass accretion rate as $\dot{M}=\dot{M}_{out}{(\frac{r}{r_{out}})^{s}}$ with $s> 0$ to investigate the influence of outflow on the structure of inflow where $s$ is a constant and indication the effect of wind. Also, we have studied the radiation spectrum and temperature of CDAFs. The thermal bermsstrahlung emission as a radiation mechanism is taken into account for calculating the spectra emitted by the CDAFs. The energy that powers bremsstrahlung emission at large radii is provided by convective transport from small radii and viscous and resistivity dissipation. Our results indicate that the disc rotates slower and accretes faster, it becomes hotter and thicker for stronger wind. By increasing all component of magnetic field, the disc rotates faster and accretes slower while it becomes hotter and thicker. We show that the outflow parameter and all component of magnetic field have the same effects on the luminosity of the disc. We compare the dynamical structure of the disc in two different solutions (with and without resistivity parameter). We show that only the radial infall velocity and the surface density could changed by resistivity parameter obviously. Increasing the effect of wind increases the disc's temperature and luminosity of the disc. The effect of magnetic field is similar to the effect of wind in the disc's temperature and luminosity of the disc, but the influence of resistivity on the observational properties is not evident.

We present the effects of ordered large scale magnetic field on the structure of supercritical accretion flow in the presence of outflow. In the cylindrical coordinates ($r, \varphi,z$), We write the 1.5 dimensional, the steady state ($\frac{\partial}{\partial t}=0$) and axisymmetric ($\frac{\partial}{\partial \varphi}=0$) inflow-outflow equations by using the self similar solutions. Also a model for radiation pressure supported accretion flow threaded by both toroidal and vertical components of magnetic field has been formulated. For studying the outflows, we adopt a radius dependent mass accretion rate as $\dot{M}=\dot{M}_{out}{(\frac{r}{r_{out}})^{s+\frac{1}{2}}}$ with $s=\frac{1}{2}$. Also by following the previous works, we have considered the interchange of mass, radial and angular momentum and the energy between inflow and outflow. we have found numerically that two components of magnetic field have the opposite effects on the thickness of the disc and similar effects on the radial and angular velocities of the flow. We have found that the existence of the toroidal component of magnetic field will lead to increasing of radial and azimuthal velocities as well as the relative thickness of the disc, which is increased . Moreover, the thickness of the disc will decrease when the vertical component of magnetic field becomes important in magnetized flow. The solutions indicated that the mass inflow rate, the specific energy of outflow affect strongly on the advection parameter.We have shown that by increasing the two components of magnetic field, the temperature of the accretion flow will decrease significantly. On the other hand we have shown the bolometric luminosity of the slim discs for high values of $\dot{m} (\dot{m}>>1)$ is not sensitive to mass accretion rate and is kept constant ($L \approx 10 L_{E}$).

We present the effect of a hydrodynamical wind on the structure and the surface temperature of a vertically self-gravitating magnetized ADAFs using self-similar solutions. Also a model for an axisymmetric, steady-state, vertically self-gravitating hot accretion flow threaded by a toroidal magnetic field has been formulated. The model is based on $\alpha-$prescription for turbulence viscosity. It is found that the thickness and radial velocity of the disc are reduced significantly as wind gets stronger. In particular, the solutions indicated that the wind and advection have the same effects on the structure of the disc. We also find that in the optically thin ADAF becomes hotter by including the wind parameter and the self-gravity parameter.

We examine the effect of thermal conduction on the observational properties of a super critical hot magnetized flow. We obtained self-similar solution of a magnetized disc when the thermal conduction plays an important role. Follow of our first paper (Ghasemnezhad et al. 2012 (hereafter GKA12)) we have extended our solution on the observational appearance of the disc to show how physical condition such as thermal conduction, viscosity, and advection will change the observed luminosity of the disc, Continuous spectra and surface temperature of such discs was plotted. We apply the present model to black-hole X-ray binary LMC X-3 and narrow-line seyfert 1 galaxies, which are supposed to be under critical accretion rate. Our results show clearly that the surface temperature is strongly depends on the thermal conduction, the magnetic field and advection parameter. However we see that thermal conduction acts to oppose the temperature gradient as we expect and observed luminosity of the disc will reduce when thermal conduction is high. We have shown that in this model the spectra of critical accretion flows strongly depends on the inclination angle.

We have explored the structure of hot magnetized accretion flow with thermal conduction. The importance of thermal conduction in hot accretion flows has been confirmed by observations of the hot gas surrounding Sgr $A^*$ and a few other nearby galactic nuclei. For a steady state structure of such accretion flows a set of self similar solutions are presented. In this paper, we have actually tried to re-check the solution presented by Abbassi et al. (2008) using a physical constrain. In this study we find that Eq 29 places a new constrain that limits answers presented by Abbassi et al. 2008. In that paper the parameter space in which it is established in the new constrain was plotted. However, the new requirement makes up only a small parameter space with physically acceptable solutions. And now in this manuscript we have followed the idea with more effort, and tried to find out how thermal conduction influences the structur of the disks in a physical parameter space. We have found out that the existence of thermal conduction will lead to reduction of accretion and radial and azimuthal velocities as well as the vertical thickness of the disk, which is slightly reduced. Moreover, the surface density of the disk will increase when the thermal conduction becomes important in the hot magnetized flow.

We examine the effects of a hydrodynamical wind on advection dominated accretion flows with thermal conduction in the presence of a toroidal magnetic field under a self-similar treatment. The disk gas is assumed to be isothermal. For a steady state structure of such accretion flows a set of self similar solutions are presented. The mass-accretion rate $\dot{M}$ decreases with radius $r$ as $\dot{M}\propto r^{s+1/2}$, where $s$ is an arbitrary constant. We show that existence of wind will lead to enhance the accretion velocity. Cooling effects of outflows or winds are noticeable and should be taken into account for calculating luminosity and effective temperature of optically thin and thick ADAFs. Increasing the effect of wind, decreases the disk's temperature, because of energy flux which is taken away by winds. We will see that for a given set of input parameters, the solution reaches to a non-rotating limit at a specific value of $\phi_s$. The values of this limitation on $\phi_s$ will increase by adding $s$, wind parameter. In fact, the higher values of $s$ will allow the disk to have physical rotating solution for larger $\phi_s$.

Observations of the hot gas, which is surrounding Sgr A* and a few other nearby galactic nuclei, imply that mean free paths of electron and proton are comparable to gas capture radius. So, hot accretion flows likely proceed under week collision conditions. As a result thermal conduction by ions has a considerable contribution in transfer of the realized heat in accretion mechanisms. We study a 2D advective accretion disk bathed in a poloidal magnetic field of a central accretor in the presence of thermal conduction. We find self-similar solutions for an axisymmetric, rotating, steady, viscose-resistive, magnetized accretion flow. The dominant mechanism of energy dissipation is assumed to be turbulence viscosity and magnetic diffusivity due to magnetic field of the central accretor. We show that the global structure of ADAFs are sensitive to viscosity, advection and thermal conduction parameters. We discuss how radial flow, angular velocity and density of accretion flows may vary with the advection, thermal conduction and viscous parameters.