We are now on a clear trajectory for improvements in exoplanet observations that will revolutionize our ability to characterize their atmospheric structure, composition, and circulation, from gas giants to rocky planets. However, exoplanet atmospheric models capable of interpreting the upcoming observations are often limited by insufficiencies in the laboratory and theoretical data that serve as critical inputs to atmospheric physical and chemical tools. Here we provide an up-to-date and condensed description of areas where laboratory and/or ab initio investigations could fill critical gaps in our ability to model exoplanet atmospheric opacities, clouds, and chemistry, building off a larger 2016 white paper, and endorsed by the NAS Exoplanet Science Strategy report. Now is the ideal time for progress in these areas, but this progress requires better access to, understanding of, and training in the production of spectroscopic data as well as a better insight into chemical reaction kinetics both thermal and radiation-induced at a broad range of temperatures. Given that most published efforts have emphasized relatively Earth-like conditions, we can expect significant and enlightening discoveries as emphasis moves to the exotic atmospheres of exoplanets.

The Cassini-Huygens space mission revealed that Titan s thick brownish haze is initiated high in the atmosphere at about 1000 km of altitude, before a slow transportation down to the surface. Close to the surface at altitudes below 130 km, the Huygens probe provided information on the chemical composition of the haze. So far we do not have insights on a possible photochemical evolution of the aerosols composing the haze during their descent. We address here this atmospheric aerosol aging process, simulating in the laboratory how solar vacuum-ultraviolet (VUV) irradiation affects the aerosol optical properties as probed by infrared spectroscopy. An important evolution is found, which could explain the apparent contradiction between the nitrogen-poor infrared spectroscopic signature observed by Cassini below 600 km of altitude in Titan s atmosphere, and a high nitrogen content as measured by the Aerosol Collector and Pyroliser of Huygens probe at the surface of Titan.

A multiwavelength study of laboratory carbons with varying degrees of hydrogenation and sp$^2$ hybridization is required to characterize the structure of the carbonaceous carriers of interstellar and circumstellar extinction. Analogs to carbonaceous interstellar dust encountered in various phases of the interstellar medium have been prepared in the laboratory. Thin films have been measured in transmission in the vacuum ultraviolet (VUV; 120 - 210 nm) within the atmospheric pressure experiment (APEX) chamber of the DISCO beam line at the SOLEIL synchrotron radiation facility. Spectra of these films were further measured through the UV-Vis (210 nm - 1 $\mu$m) and in the mid-infrared (3 - 15 $\mu$m). Tauc optical gaps, E$_g$, are derived from the visible spectra. The major spectral features are fitted through the VUV to the mid infrared to obtain positions, full-widths at half maximum (FWHM), and integrated intensities. These are plotted against the position of the $\pi$-$\pi^*$ electronic transitions peak. Unidentified or overlapping features in the UV are identified by correlations with complementary infrared data. A correlation between the optical gap and position of the $\pi$-$\pi^*$ electronic transitions peak is found. The latter is also correlated to the position of the sp$^3$ carbon defect band at ~8 $\mu$m, the aromatic C=C stretching mode position at ~6 $\mu$m, and the H/C ratio. Our study suggests that carriers of the interstellar UV bump should exhibit infrared bands akin to the A/B classes of the aromatic infrared bands, while the circumstellar bump carriers should exhibit bands corresponding to the B/C classes.

The deuterium enrichment of organics in the interstellar medium, protoplanetary disks and meteorites has been proposed to be the result of ionizing radiation. The goal of this study is to quantify the effects of soft X-rays (0.1 - 2 keV), a component of stellar radiation fields illuminating protoplanetary disks, on the refractory organics present in the disks. We prepared tholins, nitrogen-rich complex organics, via plasma deposition and used synchrotron radiation to simulate X-ray fluences in protoplanetary disks. Controlled irradiation experiments at 0.5 and 1.3 keV were performed at the SEXTANTS beam line of the SOLEIL synchrotron, and were followed by ex-situ infrared, Raman and isotopic diagnostics. Infrared spectroscopy revealed the loss of singly-bonded groups (N-H, C-H and R-N$\equiv$C) and the formation of sp$^3$ carbon defects. Raman analysis revealed the introduction of defects and structural amorphization. Finally, tholins were measured via secondary ion mass spectrometry (SIMS), revealing that significant D-enrichment is induced by X-ray irradiation. Our results are compared to previous experimental studies involving the thermal degradation and electron irradiation of organics. The penetration depth of soft X-rays in $\mu$m-sized tholins leads to volume rather than surface modifications: lower energy X-rays (0.5 keV) induce a larger D-enrichment than 1.3 keV X-rays, reaching a plateau for doses larger than 5 $\times$ 10$^{27}$ eV cm$^{-3}$. Our work provides experimental evidence of a new non-thermal pathway to deuterium fractionation of organic matter.

Context. The observed cloudshine and coreshine (C-shine) have been explained in terms of grain growth leading to enhanced scatter- ing from clouds in the J, H and K photometric bands and the Spitzer IRAC 3.6 and 4.5 {\mu}m bands. Aims. Using our global dust modelling approach THEMIS (The Heterogeneous dust Evolution Model at the IaS) we explore the effects of dust evolution in dense clouds, through aliphatic-rich carbonaceous mantle formation and grain-grain coagulation. Methods. We model the effects of wide band gap a-C:H mantle formation and the low-level aggregation of diffuse interstellar medium dust in the moderately-extinguished outer regions of molecular clouds. Results. The formation of wide band gap a-C:H mantles on amorphous silicate and amorphous carbon (a-C) grains leads to a decrease in their absorption cross-sections but no change in their scattering cross-sections at near-IR wavelengths, resulting in higher albedos. Conclusions. The evolution of dust, with increasing density and extinction in the diffuse to dense molecular cloud transition, through mantle formation and grain aggregation, appears to be a likely explanation for the observed C-shine.

Many dense interstellar clouds are observable in emission in the near-IR, commonly referred to as "Cloudshine", and in the mid-IR, the so-called "Coreshine". These C-shine observations have usually been explained with grain growth but no model has yet been able to self-consistently explain the dust spectral energy distribution from the near-IR to the submm. We want to demonstrate the ability of our new core/mantle evolutionary dust model THEMIS (The Heterogeneous dust Evolution Model at the IaS), which has been shown to be valid in the far-IR and submm, to reproduce the C-shine observations. Our starting point is a physically motivated core/mantle dust model. It consists of 3 dust populations: small aromatic-rich carbon grains; bigger core/mantle grains with mantles of aromatic-rich carbon and cores either made of amorphous aliphatic-rich carbon or amorphous silicate. We assume an evolutionary path where these grains, when entering denser regions, may first form a second aliphatic-rich carbon mantle (coagulation of small grains, accretion of carbon from the gas phase), second coagulate together to form large aggregates, and third accrete gas phase molecules coating them with an ice mantle. To compute the corresponding dust emission and scattering, we use a 3D Monte-Carlo radiative transfer code. We show that our global evolutionary dust modelling approach THEMIS allows us to reproduce C-shine observations towards dense starless clouds. Dust scattering and emission is most sensitive to the cloud central density and to the steepness of the cloud density profile. Varying these two parameters leads to changes, which are stronger in the near-IR, in both the C-shine intensity and profile. With a combination of aliphatic-rich mantle formation and low-level coagulation into aggregates, we can self-consistently explain the observed C-shine and far-IR/submm emission towards dense starless clouds.

A full spectral characterization of carbonaceous dust analogs is necessary to understand their potential as carriers of observed astronomical spectral signatures such as the ubiquitous UV bump at 217.5 nm and the far-ultraviolet (FUV) rise common to interstellar extinction curves. Our goal is to study the spectral properties of carbonaceous dust analogs from the FUV to the mid-infrared (MIR) domain. We seek in particular to understand the spectra of these materials in the FUV range, for which laboratory studies are scarce. We produced analogs to carbonaceous interstellar dust encountered in various phases of the interstellar medium: amorphous hydrogenated carbons (a-C:H), for carbonaceous dust observed in the diffuse interstellar medium, and soot particles, for the polyaromatic component. Analogs to a-C:H dust were produced using a radio-frequency plasma reactor at low pressures, and soot nanoparticles films were produced in an ethylene (C$_2$H$_4$) flame. We measured transmission spectra of these thin films (thickness < 100 nm) in the far-ultraviolet (190 - 250 nm) and in the vacuum-ultraviolet (VUV; 50 - 190 nm) regions using the APEX chamber at the DISCO beam line of the SOLEIL synchrotron radiation facility. These were also characterized through infrared microscopy at the SMIS beam line. We successfully measured the transmission spectra of these analogs from {\lambda} = 1 {\mu}m to 50 nm. From these, we extracted the laboratory optical constants via Kramers-Kronig inversion. We used these constants for comparison to existing interstellar extinction curves. We extend the spectral measurements of these types of carbonaceous analogs into the VUV and link the spectral features in this range to the 3.4 {\mu}m band. We suggest that these two materials might contribute to different classes of interstellar extinction curves.

Protoplanetary disks, interstellar clouds, and active galactic nuclei, contain X-ray dominated regions. X-rays interact with the dust and gas present in such environments. While a few laboratory X-ray irradiation experiments have been performed on ices, X-ray irradiation experiments on bare cosmic dust analogs have been scarce up to now. Our goal is to study the effects of hard X-rays on cosmic dust analogs via in-situ X-ray diffraction. By using a hard X-ray synchrotron nanobeam, we seek to simulate cumulative X-ray exposure on dust grains during their lifetime in these astrophysical environments, and provide an upper limit on the effect of hard X-rays on dust grain structure. We prepared enstatite nanograins, analogs to cosmic silicates, via the melting-quenching technique. These amorphous grains were then annealed to obtain polycrystalline grains. These were characterized via scanning electron microscopy and high-resolution transmission electron microscopy before irradiation. Powder samples were prepared in X-ray transparent substrates and were irradiated with hard X-rays nanobeams (29.4 keV) provided by beamline ID16B of the European Synchrotron Radiation Facility. X-ray diffraction images were recorded in transmission mode. We detected the amorphization of polycrystalline silicates embedded in an organic matrix after an accumulated X-ray exposure of 6.4 x 10$^{27}$ eV cm$^{-2}$. Pure crystalline silicate grains (without resin) did not exhibit amorphization. None of the amorphous silicate samples (pure and embedded in resin) underwent crystallization. We analyzed the evolution of the polycrystalline sample embedded in an organic matrix as a function of X-ray exposure. Loss of diffraction peak intensity, peak broadening, and the disappearance of discrete spots and arcs, revealed the amorphization of the resin embedded (originally polycrystalline) silicate sample.

Sticking of H and D atoms on interstellar dust grains is the first step in molecular hydrogen formation, which is a key reaction in the InterStellar Medium (ISM). After studying the sticking coefficients of H2 and D2 molecules on amorphous silicate surfaces experimentally and theoretically, we extrapolate the results to the sticking coefficient of atoms and propose a formulae that gives the sticking coefficients of H and D on both silicates and icy dust grains. In our experiments, we used the King and Wells method for measuring the sticking coefficients of H2 and D2 molecules on a silicate surface held at 10 K. It consists of measuring with a QMS (quadrupole mass spectrometer) the signals of H2 and D2 molecules reflected by the surface during the exposure of the sample to the molecular beam at a temperature ranging from 20 K to 340 K. We tested the efficiency of a physical model, developed previously for sticking on water-ice surfaces. We applied this model to our experimental results for the sticking coefficients of H2 and D2 molecules on a silicate surface and estimated the sticking coefficient of atoms by a single measurement of atomic recombination and propose an extrapolation. Sticking of H, D, HD, H2, and D2 on silicates grains behaves the same as on icy dust grains. The sticking decreases with the gas temperature, and is dependent on the mass of the impactor. The sticking coefficient for both surfaces and impactors can be modeled by an analytical formulae S(T), which describes both the experiments and the thermal distribution expected in an astrophysical context. The parameters S0 and T0 are summarized in a table. Previous estimates for the sticking coefficient of H atoms are close to the new estimation; however, we find that, when isotopic effects are taken into account, the sticking coefficient variations can be as much as a factor of 2 at T=100 K.