Our recent observational study shows that the majority of coronal bright points (CBPs) in the quiet Sun are sources of one or more eruptions during their lifetime. Here, we investigate the non-potential time dependent structure of the magnetic field of the CBP regions with special emphasis on the time evolving magnetic structure at the spatial locations where the eruptions are initiated. The magnetic structure is evolved in time using a Non-Linear Force Free Field (NLFFF) relaxation approach, based on a time series of Helioseismic and Magnetic Imager (HMI) longitudinal magnetograms. This results in a continuous time series of NLFFFs. The time series is initiated with a potential field extrapolation based on a magnetogram taken well before the time of the eruptions. This initial field is then evolved in time in response to the observed changes in the magnetic field distribution at the photosphere. The local and global magnetic field structures from the time series of NLFFF field solutions are analysed in the vicinity of the eruption sites at the approximate times of the eruptions. The analysis shows that many of the CBP eruptions reported in Mou etl. (2018) contain twisted flux tube located at the sites of eruptions. The presence of flux ropes at these locations provides in many cases a direct link between the magnetic field structure, their eruption and the observation of mini coronal mass ejections (mini-CMEs). It is found that all repetitive eruptions are homologous. The NLFFF simulations show that twisted magnetic field structures are created at the locations hosting eruptions in CBPs. These twisted structures are produced by footpoint motions imposed by changes in the photospheric magnetic field observations. The true nature of the micro-flares remains unknown. Further 3D data-driven MHD modelling is required to show how these twisted regions become unstable and erupt.

Observations of the full lifetime of CBPs in data taken with the AIA on board SDO in four passbands, He II 304 A, Fe IX/X 171 A, Fe XII 193 A, and Fe XVIII 94 A are investigated for the occurrence of plasma ejections, micro-flaring, mini-filament eruptions and mini coronal mass ejections (mini-CMEs). First and foremost, our study shows that the majority (76%) of quiet Sun CBPs (31 out of 42 CBPs) produce at least one eruption during their lifetime. From 21 eruptions in 11 CBPs, 18 occur in average ~17 hrs after the CBP formation for an average lifetime of the CBPs in AIA 193 A of ~21 hrs. This time delay in the eruption occurrence coincides in each BP with the convergence and cancellation phase of the CBP bipole evolution during which the CBPs become smaller until they fully disappear. The remaining three happen 4 - 6 hrs after the CBP formation. In sixteen out of 21 eruptions the magnetic convergence and cancellation involve the CBP main bipoles, while in three eruptions one of the BP magnetic fragments and a pre-existing fragment of opposite polarity converge and cancel. In one BP with two eruptions cancellation was not observed. The CBP eruptions involve in most cases the expulsion of chromospheric material either as elongated filamentary structure (mini-filament, MF) or a volume of cool material (cool plasma cloud, CPC), together with the CBP or higher overlying hot loops. Coronal waves were identified during three eruptions. A micro-flaring is observed beneath all erupting MFs/CPCs. It remains uncertain whether the destabilised MF causes the micro-flaring or the destabilisation and eruption of the MF is triggered by reconnection beneath the filament. In most eruptions, the cool erupting plasma obscures partially or fully the micro-flare until the erupting material moves away from the CBP. From 21 eruptions 11 are found to produce mini-CMEs.

{We report on the first of a series of studies on coronal bright points investigating the physical mechanism that generates these phenomena.} {The aim of this paper is to understand the magnetic-field structure that hosts the bright points.} {We use longitudinal magnetograms taken by the Solar Optical Telescope with the Narrowband Filter Imager. For a single case, magnetograms from the Helioseismic and Magnetic Imager were added to the analysis. The longitudinal magnetic field component is used to derive the potential magnetic fields of the large regions around the bright points. A magneto-static field extrapolation method is tested to verify the accuracy of the potential field modelling. The three dimensional magnetic fields are investigated for the presence of magnetic null points and their influence on the local magnetic domain.} {In 9 out of 10 cases the bright point resides in areas where the coronal magnetic field contains an opposite polarity intrusion defining a magnetic null point above it. It is found that X-ray bright points reside, in these 9 cases, in a limited part of the projected fan dome area, either fully inside the dome or expanding over a limited area below which typically a dominant flux concentration resides. The 10th bright point is located in a bipolar loop system without an overlying null point.} {All bright points in coronal holes and two out of tree bright points in quiet Sun regions are seen to reside in regions containing a magnetic null point. An yet unidentified process(es) generates the BPs in specific regions of the fan-dome structure. }

Coronal magnetic null points exist in abundance as demonstrated by extrapolations of the coronal field, and have been inferred to be important for a broad range of energetic events. These null points and their associated separatrix and spine field lines represent discontinuities of the field line mapping, making them preferential locations for reconnection. This field line mapping also exhibits strong gradients adjacent to the separatrix (fan) and spine field lines, that can be analysed using the `squashing factor', $Q$. In this paper we make a detailed analysis of the distribution of $Q$ in the presence of magnetic nulls. While $Q$ is formally infinite on both the spine and fan of the null, the decay of $Q$ away from these structures is shown in general to depend strongly on the null-point structure. For the generic case of a non-radially-symmetric null, $Q$ decays most slowly away from the spine/fan in the direction in which $|{\bf B}|$ increases most slowly. In particular, this demonstrates that the extended, elliptical high-$Q$ halo around the spine footpoints observed by Masson et al. (Astrophys. J., 700, 559, 2009) is a generic feature. This extension of the $Q$ halos around the spine/fan footpoints is important for diagnosing the regions of the photosphere that are magnetically connected to any current layer that forms at the null. In light of this, we discuss how our results can be used to interpret the geometry of observed flare ribbons in `circular ribbon flares', in which typically a coronal null is implicated. We conclude that both the physics in the vicinity of the null and how this is related to the extension of $Q$ away from the spine/fan can be used in tandem to understand observational signatures of reconnection at coronal null points.

Context. Observations of many active regions show a slow systematic outflow/upflow from their edges lasting from hours to days. At present no physical explanation has been proven, while several suggestions have been put forward. Aims. This paper investigates one possible method for maintaining these upflows assuming that convective motions drive the magnetic field to initiate them through magnetic reconnection. Methods. We use Helioseismic and Magnetic Imager (HMI) data to provide an initial potential three dimensional magnetic field of the active region NOAA 11123 on 2010 November 13 where the characteristic upflow velocities are observed. A simple one-dimensional hydrostatic atmospheric model covering the region from the photosphere to the corona is derived. Local Correlation Tracking of the magnetic features in the HMI data is used to derive a proxy for the time dependent velocity field. The time dependent evolution of the system is solved using a resistive three-dimensional MagnetoHydro-Dynamic code. Results. The magnetic field contains several null points located well above the photosphere, with their fan planes dividing the magnetic field into independent open and closed flux domains. The stressing of the interfaces between the different flux domains is expected to provide locations where magnetic reconnection can take place and drive systematic flows. In this case, the region between the closed and open flux is identified as the region where observations find the systematic upflows. Conclusions. In the present experiment, the driving only initiates magneto-acoustic waves, without driving any systematic upflows at any of the flux interfaces.

Upflows at the edges of active regions (ARs) are studied by spatially and temporally combining multi-instrument observations obtained with EIS/Hinode, AIA and HMI/SDO and IBIS/NSO, to derive their plasma parameters. This information is used for benchmarking data-driven modelling of the upflows (Galsgaard et al., 2015). The studied AR upflow displays blueshifted emission of 5-20 km/s in Fe XII and Fe XIII and its average electron density is 1.8x10^9 cm^3 at 1 MK. The time variation of the density shows no significant change (in a 3sigma error). The plasma density along a single loop drops by 50% over a distance of 20000 km. We find a second velocity component in the blue wing of the Fe XII and Fe XIII lines at 105 km/s. This component is persistent during the whole observing period of 3.5 hours with variations of only 15 km/s. We also study the evolution of the photospheric magnetic field and find that magnetic flux diffusion is responsible for the formation of the upflow region. High cadence Halpha observations of the chromosphere at the footpoints of the upflow region show no significant jet-like (spicule/rapid blue excursion) activity to account for several hours/days of plasma upflow. Using an image enhancement technique, we show that the coronal structures seen in the AIA 193A channel is comparable to the EIS Fe XII images, while images in the AIA 171A channel reveals additional loops that are a result of contribution from cooler emission to this channel. Our results suggest that at chromospheric heights there are no signatures that support the possible contribution of spicules to AR upflows. We suggest that magnetic flux diffusion is responsible for the formation of the coronal upflows. The existence of two velocity components possibly indicate the presence of two different flows which are produced by two different physical mechanisms, e.g. magnetic reconnection and pressure-driven.

We present study of a typical explosive event (EE) at sub-arcsecond scale witnessed by strong non-Gaussian profiles with blue- and red-shifted emission of up to 150 km/s seen in the transition-region Si IV 1402.8 \AA, and the chromospheric Mg II k 2796.4 \AA\ and C II 1334.5 \AA\ observed by the Interface Region Imaging Spectrograph at unprecedented spatial and spectral resolution. For the first time a EE is found to be associated with very small-scale ($\sim$120 km wide) plasma ejection followed by retraction in the chromosphere. These small-scale jets originate from a compact bright-point-like structure of $\sim$1.5" size as seen in the IRIS 1330 \AA\ images. SDO/AIA and SDO/HMI co-observations show that the EE lies in the footpoint of a complex loop-like brightening system. The EE is detected in the higher temperature channels of AIA 171 \AA, 193 \AA\ and 131 \AA\ suggesting that it reaches a higher temperature of log T$=5.36\pm0.06$ (K). Brightenings observed in the AIA channels with durations 90--120 seconds are probably caused by the plasma ejections seen in the chromosphere. The wings of the C II line behave in a similar manner as the Si IV's indicating close formation temperatures, while the Mg II k wings show additional Doppler-shifted emission. Magnetic convergence or emergence followed by cancellation at a rate of $5\times10^{14}$ Mx s$^{-1}$ is associated with the EE region. The combined changes of the locations and the flux of different magnetic patches suggest that magnetic reconnection must have taken place. Our results challenge several theories put forward in the past to explain non-Gaussian line profiles, i.e. EEs. Our case study on its own, however, cannot reject these theories, thus further in-depth studies on the phenomena producing EEs are required.

Three-dimensional magnetic null points are ubiquitous in the solar corona, and in any generic mixed-polarity magnetic field. We consider magnetic reconnection at an isolated coronal null point, whose fan field lines form a dome structure. We demonstrate using analytical and computational models several features of spine-fan reconnection at such a null, including the fact that substantial magnetic flux transfer from one region of field line connectivity to another can occur. The flux transfer occurs across the current sheet that forms around the null point during spine-fan reconnection, and there is no separator present. Also, flipping of magnetic field lines takes place in a manner similar to that observed in quasi-separatrix layer or slip-running reconnection.

A three-dimensional numerical experiment of the launching of a hot and fast coronal jet followed by several violent eruptions is analyzed in detail. These events are initiated through the emergence of a magnetic flux rope from the solar interior into a coronal hole. We explore the evolution of the emerging magnetically-dominated plasma dome surmounted by a current sheet and the ensuing pattern of reconnection. A hot and fast coronal jet with inverted-Y shape is produced that shows properties comparable to those frequently observed with EUV and X-Ray detectors. We analyze its 3D shape, its inhomogeneous internal structure, and its rise and decay phases, lasting for some 15-20 min each. Particular attention is devoted to the field-line connectivities and the reconnection pattern. We also study the cool and high-density volume that appears encircling the emerged dome. The decay of the jet is followed by a violent phase with a total of five eruptions. The first of them seems to follow the general pattern of tether-cutting reconnection in a sheared arcade, although modified by the field topology created by the preceding reconnection evolution. The two following eruptions take place near and above the strong field-concentrations at the surface. They show a twisted, \Omega-loop like rope expanding in height, with twist being turned into writhe, thus hinting at a kink instability (perhaps combined with a torus-instability) as the cause of the eruption. The succession of a main jet ejection and a number of violent eruptions that resemble mini-CME's and their physical properties suggest that this experiment may provide a model for the blowout jets recently proposed in the literature.

Numerical MHD simulations of 3D reconnection events in the solar corona have improved enormously over the last few years, not only in resolution, but also in their complexity, enabling more and more realistic modeling. Various ways to obtain the initial magnetic field, different forms of solar atmospheric models as well as diverse driving speeds and patterns have been employed. This study considers differences between simulations with stratified and non-stratified solar atmospheres, addresses the influence of the driving speed on the plasma flow and energetics, and provides quantitative formulas for mapping electric fields and dissipation levels obtained in numerical simulations to the corresponding solar quantities. The simulations start out from a potential magnetic field containing a null-point, obtained from a Solar and Heliospheric Observatory (SOHO) magnetogram extrapolation approximately 8 hours before a C-class flare was observed. The magnetic field is stressed with a boundary motion pattern similar to - although simpler than - horizontal motions observed by SOHO during the period preceding the flare. The general behavior is nearly independent of the driving speed, and is also very similar in stratified and non-stratified models, provided only that the boundary motions are slow enough. The boundary motions cause a build-up of current sheets, mainly in the fan-plane of the magnetic null-point, but do not result in a flare-like energy release. The additional free energy required for the flare could have been partly present in non-potential form in the initial state, with subsequent additions from magnetic flux emergence or from components of the boundary motion that were not represented by the idealized driving pattern.

Three-dimensional null points are present in abundance in the solar corona, and the same is likely to be true in other astrophysical environments. Recent studies suggest that reconnection at such 3D nulls may play an important role in the coronal dynamics. In this paper the properties of the torsional spine and torsional fan modes of magnetic reconnection at 3D nulls are investigated. New analytical models are developed, which for the first time include a current layer that is spatially localised around the null, extending along either the spine or the fan of the null. These are complemented with numerical simulations. The principal aim is to investigate the effect of varying the degree of asymmetry of the null point magnetic field on the resulting reconnection process - where previous studies always considered a non-generic radially symmetric null. The geometry of the current layers within which torsional spine and torsional fan reconnection occur is found to be strongly dependent on the symmetry of the magnetic field. Torsional spine reconnection still occurs in a narrow tube around the spine, but with elliptical cross-section when the fan eigenvalues are different, and with the short axis of the ellipse being along the strong field direction. The spatiotemporal peak current, and the peak reconnection rate attained, are found not to depend strongly on the degree of asymmetry. For torsional fan reconnection, the reconnection occurs in a planar disk in the fan surface, which is again elliptical when the symmetry of the magnetic field is broken. The short axis of the ellipse is along the weak field direction, with the current being peaked in these weak field regions. The peak current and peak reconnection rate in this case are clearly dependent on the asymmetry, with the peak current increasing but the reconnection rate decreasing as the degree of asymmetry is increased.

Context. We investigate the dynamical evolution of the reconnection process at an initially linear 3D null point that is stressed by a localised shear motion across the spine axis. The fan plane is not rotationally symmetric and this allows for different behaviours depending on the alignment of the fan plane relative to the imposed driver direction. Aims. The aim is to show how the current accumulation and the associated reconnection process depends on the relative orientation between the driver imposed stress across the spine axis of the null and the main eigenvector direction in the fan plane. Methods. The time evolution of the 3D null point is investigated solving the 3D non-ideal MHD equations numerically in a Cartesian box. The magnetic field is frozen to the boundaries and the boundary velocity is only non-zero where the imposed driving is for stressing the system is applied. Results. The current accumulation is found to be along the direction of the fan eigenvector associated with the smallest eigenvalue until the direction of the driver is almost parallel to this eigenvector. When the driving velocity is parallel to the weak eigenvector and has an impulsive temporal profile the null only forms a weak current layer. However, when the null point is stressed continuously boundary effects dominates the current accumulation. Conclusions. There is a clear relation between the orientation of the current concentration and the direction of the fan eigenvector corresponding to the small eigenvalue. This shows that the structure of the magnetic field is the most important in determining where current is going to accumulate when a single 3D null point is perturbed by a simple shear motion across the spine axis. As the angle between the driving direction and the strong eigenvector direction increases, the current that accumulates at the null becomes progressively weaker.

To systematically stress a rotationally symmetric 3D magnetic null point by advecting the opposite footpoints of the spine axis in opposite directions. This stress eventually concentrates in the vicinity of the null point forming a local current sheet through which magnetic reconnection takes place. The aim is to look for a steady state evolution of the current sheet dynamics which may provide scaling relations for various characteristic parameters of the system. The evolution is followed by solving numerically the non-ideal MHD equations in a Cartesian domain. The null point is embedded in an initially constant density and temperature plasma. It is shown that a quasi-steady reconnection process can be set up at a 3D null by continuous shear driving. It appears that a true steady state in unlikely to be realised as the current layer tends to grow until restricted by the geometry of the computational domain and imposed driving profile. However, ratios between characteristic quantities clearly settle after some time to stable values -- so that the evolution is quasi-steady. The experiments show a number of scaling relations, but they do not provide a clear consensus for extending to lower magnetic resistivity or faster driving velocities. More investigations are needed to fully clarify the properties of current sheets at magnetic null points.

Aims: Our aim is to investigate the resistive relaxation of a magnetic loop that contains braided magnetic flux but no net current or helicity. The loop is subject to line-tied boundary conditions. We investigate the dynamical processes that occur during this relaxation, in particular the magnetic reconnection that occurs, and discuss the nature of the final equilibrium. Methods: The three-dimensional evolution of a braided magnetic field is followed in a series of resistive MHD simulations. Results: It is found that, following an instability within the loop, a myriad of thin current layers forms, via a cascade-like process. This cascade becomes more developed and continues for a longer period of time for higher magnetic Reynolds number. During the cascade, magnetic flux is reconnected multiple times, with the level of this `multiple reconnection' positively correlated with the magnetic Reynolds number. Eventually the system evolves into a state with no more small-scale current layers. This final state is found to approximate a non-linear force-free field consisting of two flux tubes of oppositely-signed twist embedded in a uniform background field.

To use a 3D numerical MHD experiment representing magnetic flux emerging into an open field region as a background field for tracing charged particles. The interaction between the two flux systems generates a localised current sheet where MHD reconnection takes place. We investigate how efficiently the reconnection region accelerates charged particles and what kind of energy distribution they acquire. The particle tracing is done numerically using the Guiding Center Approximation on individual data sets from the numerical MHD experiment. We derive particle and implied photon distribution functions having power law forms, and look at the impact patterns of particles hitting the photosphere. We find that particles reach energies far in excess of those seen in observations of solar flares. However the structure of the impact region in the photosphere gives a good representation of the topological structure of the magnetic field.

The role of null-point reconnection in a 3D numerical MHD model of solar emerging flux is investigated. The model consists of a twisted magnetic flux tube rising through a stratified convection zone and atmosphere to interact and reconnect with a horizontal overlying magnetic field in the atmosphere. Null points appear as the reconnection begins and persist throughout the rest of the emergence, where they can be found mostly in the model photosphere and transition region, forming two loose clusters on either side of the emerging flux tube. Up to 26 nulls are present at any one time, and tracking in time shows that there is a total of 305 overall, despite the initial simplicity of the magnetic field configuration. We find evidence for the reality of the nulls in terms of their methods of creation and destruction, their balance of signs, their long lifetimes, and their geometrical stability. We then show that due to the low parallel electric fields associated with the nulls, null-point reconnection is not the main type of magnetic reconnection involved in the interaction of the newly emerged flux with the overlying field. However, the large number of nulls implies that the topological structure of the magnetic field must be very complex and the importance of reconnection along separators or separatrix surfaces for flux emergence cannot be ruled out.

Recent observations of coronal hole areas with the XRT and EIS instruments onboard the Hinode satellite have shown with unprecedented detail the launching of fast, hot jets away from the solar surface. In some cases these events coincide with episodes of flux emergence from beneath the photosphere. In this letter we show results of a 3D numerical experiment of flux emergence from the solar interior into a coronal hole and compare them with simultaneous XRT and EIS observations of a jet-launching event that accompanied the appearance of a bipolar region in MDI magnetograms. The magnetic skeleton and topology that result in the experiment bear a strong resemblance to linear force-fee extrapolations of the SOHO/MDI magnetograms. A thin current sheet is formed at the boundary of the emerging plasma. A jet is launched upward along the open reconnected field lines with values of temperature, density and velocity in agreement with the XRT and EIS observations. Below the jet, a split-vault structure results with two chambers: a shrinking one containing the emerged field loops and a growing one with loops produced by the reconnection. The ongoing reconnection leads to a horizontal drift of the vault-and-jet structure. The timescales, velocities, and other plasma properties in the experiment are consistent with recent statistical studies of this type of events made with Hinode data.

The emergence of magnetic flux from the convection zone into the corona is an important process for the dynamical evolution of the coronal magnetic field. In this paper we extend our previous numerical investigations, by looking at the process of flux interaction as an initially twisted flux tube emerges into a plane parallel, coronal magnetic field. Significant differences are found in the dynamical appearance and evolution of the emergence process depending on the relative orientation between the rising flux system and any preexisting coronal field. When the flux systems are nearly anti-parallel, the experiments show substantial reconnection and demonstrate clear signatures of a high temperature plasma located in the high velocity outflow regions extending from the reconnection region. However, the cases that have a more parallel orientation of the flux systems show very limited reconnection and none of the associated features. Despite the very different amount of reconnection between the two flux systems, it is found that the emerging flux that is still connected to the original tube, reaches the same height as a function of time. As a compensation for the loss of tube flux, a clear difference is found in the extent of the emerging loop in the direction perpendicular to the main axis of the initial flux tube. Increasing amounts of magnetic reconnection decrease the volume, which confines the remaining tube flux.

The nature of current sheet formation in the vicinity of three-dimensional (3D) magnetic null points is investigated. The particular focus is upon the effect of the compressibility of the plasma on the qualitative and quantitative properties of the current sheet. An initially potential 3D null is subjected to shearing perturbations, as in a previous paper [Pontin et al., Phys. Plasmas, in press (2007)]. It is found that as the incompressible limit is approached, the collapse of the null point is suppressed, and an approximately planar current sheet aligned to the fan plane is present instead. This is the case regardless of whether the spine or fan of the null is sheared. Both the peak current and peak reconnection rate are reduced. The results have a bearing on previous analytical solutions for steady-state reconnection in incompressible plasmas, implying that fan current sheet solutions are dynamically accessible, while spine current sheet solutions are not.

The nature of the evolution of the magnetic field, and of current sheet formation, at three-dimensional (3D) magnetic null points is investigated. A kinematic example is presented which demonstrates that for certain evolutions of a 3D null (specifically those for which the ratios of the null point eigenvalues are time-dependent) there is no possible choice of boundary conditions which renders the evolution of the field at the null ideal. Resistive MHD simulations are described which demonstrate that such evolutions are generic. A 3D null is subjected to boundary driving by shearing motions, and it is shown that a current sheet localised at the null is formed. The qualitative and quantitative properties of the current sheet are discussed. Accompanying the sheet development is the growth of a localised parallel electric field, one of the signatures of magnetic reconnection. Finally, the relevance of the results to a recent theory of turbulent reconnection is discussed.

The heating of the solar corona is likely to be due to reconnection of the highly complex magnetic field that threads throughout its volume. We have run a numerical experiment of an elementary interaction between the magnetic field of two photospheric sources in an overlying field that represents a fundamental building block of the coronal heating process. The key to explaining where, how and how much energy is released during such an interaction is to calculate the resulting evolution of the magnetic skeleton. A skeleton is essentially the web of magnetic flux surfaces (called separatrix surfaces) that separate the coronal volume into topologically distinct parts. For the first time the skeleton of the magnetic field in a 3D numerical MHD experiment is calculated and carefully analysed, as are the ways in which it bifurcates into different topologies. A change in topology normally changes the number of magnetic reconnection sites. In our experiment, the magnetic field evolves through a total of six distinct topologies. Initially, no magnetic flux joins the two sources. Then a new type of bifurcation, called a global double-separator bifurcation, takes place: this bifurcation is likely to be one of the main ways in which new separators are created in the corona (separators are field lines at which 3D reconnection takes place). This is the first of five bifurcations in which the skeleton becomes progressively more complex before simplifying. Surprisingly, for such a simple initial state, at the peak of complexity there are five separators and eight flux domains present.

The behaviour of magnetic perturbations of an initially potential three-dimensional equilibrium magnetic null point are investigated. The basic components which constitute a typical disturbance are taken to be rotations and shears, in line with previous work. The spine and fan of the null point (the field lines which asymptotically approach or recede from the null) are subjected to such rotational and shear perturbations, using three-dimensional magnetohydrodynamic simulations. It is found that rotations of the fan plane and about the spine lead to current sheets which are spatially diffuse in at least one direction, and form in the locations of the spine and fan. However, shearing perturbations lead to 3D-localised current sheets focused at the null point itself. In addition, rotations are associated with a growth of current parallel to the spine, driving rotational flows and a type of rotational reconnection. Shears, on the other hand, cause a current through the null which is parallel to the fan plane, and are associated with stagnation-type flows and field line reconnection across both the spine and fan. The importance of the parallel electric field, and its meaning as a reconnection rate, are discussed.

The magnetic field plays a crucial role in heating the solar corona, but the exact energy release mechanism(s) is(are) still unknown. Here, we investigate in detail, the process of magnetic energy release in a situation where two initially independent flux systems are forced into each other. Work done by the foot point motions goes in to building a current sheet in which magnetic reconnection takes place. The scaling relations of the energy input and output are determined as functions of the driving velocity and the strength of fluxes in the independent flux systems. In particular, it is found that the energy injected into the system is proportional to the distance travelled not the rate of travel. Similarly, the rate of Joule dissipation is related to the distance travelled. Hence, rapidly driven foot points lead to bright, intense, but short-lived events, whilst slowly driven foot points produce weaker, but longer-lived brightenings. Integrated over the lifetime of the events both would produce the same heating if all other factors were the same. A strong overlying field has the affect of creating compact flux lobes from the sources. These appear to lead to a more rapid injection of energy, as well as a more rapid release of energy. Thus, the stronger the overlying field the more compact and more intense the heating. This means observers must know the rate of movement of the magnetic fragments involved in an events, as well as determine the strength and orientation of the surrounding field to be able to predict anything about the energy dissipated.

We present the results of a set of three-dimensional numerical simulations of magnetic flux emergence from below the photosphere into the corona that include a uniform and horizontal coronal magnetic field mimicking a pre-existing large-scale coronal magnetic system. Cases with different relative orientations of the upcoming and coronal fields are studied. Upon contact, a concentrated current sheet with the shape of an arch or bridge is formed at the interface which marks the positions of maximum jump in the field vector between the two systems. Relative angles above 90 degrees yield abundant magnetic reconnection and plasma heating. The reconnection is seen to be intrisincally three-dimensional in nature, except at singular positions along the current sheet. It drives collimated high-speed and high-temperature outflows only a short distance from the reconnection site that propagate along the ambient magnetic field lines as jets. Due to the low plasma density in the corona, these jets may propagate over large distances and, therefore help distribute high-density and high-temperature plasma along these newly reconnected field lines. The experiments permit to discern and visualize the three-dimensional shape and relative position of the upcoming plasma hill, high-speed jets and subphotospheric flux system. As a result of the reconnection, magnetic field lines from the magnetized plasma below the surface end up as coronal field lines, thus causing a profound change in the connectivity of the magnetic regions in the corona. The experiments presented here thus yield a number of features repeatedly observed with the TRACE satellite and the YOHKOH-SXT detector, like the establishment of connectivity between emergent and pre-existing active regions, local heating and high-velocity outflows.

In this paper, we investigate a simple model where two, initially unconnected, flux systems are forced to interact in response to the imposed boundary driving by solving the non-ideal 3D MHD equations numerically. The reconnection rate of the dynamical process is determined and compared with the corresponding rate for the potential evolution of the magnetic field. This shows that the dynamic reconnection rate is about a factor of two smaller than the potential (perfect, instantaneous) rate for realistic solar driving velocities demonstrating that this three-dimensional magnetic reconnection process is fast. The energy input for a fixed advection distance is found to be independent of the driving velocity. The Joule dissipation associated with the reconnection process is also found to be basically dependent on the advection distance rather than driving velocity. This implies that the timescale for the event determines the effect the heating has on the temperature increase. Finally, the numerical experiments indicate that the observational structure of the reconnection site changes dramatically depending on the phase of the evolution of the passage of the two flux sources. In the initial phase, where the sources become connected, the heating is confined to a compact region. For the disconnecting phase the energy gets distributed over a larger area due to the reconnected field line connectivity.

The concept of hyperbolic flux tubes (HFTs) is a generalization of the concept of separator field lines for coronal magnetic fields with a trivial magnetic topology. An effective mechanism of a current layer formation in HFTs is proposed. This mechanism is called magnetic pinching and it is caused by large-scale shearing motions applied to the photospheric feet of HFTs in a way as if trying to twist the HFT. It is shown that in the middle of an HFT such motions produce a hyperbolic flow that causes an exponentially fast growth of the current density in a thin force-free current layer. The magnetic energy associated with the current layer that is built up over a few hours is sufficient for a large flare. Other implications of HFT pinching for solar flares are discussed as well.