Saturn's moon Iapetus, which is in synchronous rotation, is covered by an optically dark material mainly on its leading side, while its trailing side is significantly brighter. Because longer wavelengths probe deeper into the subsurface, observing both sides at a variety of wavelengths brings to light possible changes in thermal, compositional, and physical properties with depth. We have observed Iapetus's leading and trailing hemispheres at 1.2 and 2.0 mm, using the NIKA2 camera mounted on the IRAM 30-m telescope, and compared our observations to others performed at mm to cm wavelengths. We calibrate our observations on Titan, which is simultaneously observed within the field of view. Due to the proximity of Saturn, it is sometimes difficult to separate Iapetus's and Titan's flux from that of Saturn, detected in the telescope's side lobes. Preliminary results show that the trailing hemisphere brightness temperatures at the two wavelengths are equal within error bars, unlike the prediction made by Ries (2012). On the leading side, we report a steep spectral slope of increasing brightness temperature (by 10 K) from 1.2 to 2.0 mm, which may indicate rapidly varying emissivities within the top few centimeters of the surface. Comparison to a diffuse scattering model and a thermal model will be necessary to further constrain the thermophysical properties of the subsurface of Iapetus's two faces.

Some of the major discoveries of the recent Cassini-Huygens mission have put Titan and Enceladus firmly on the Solar System map. The mission has revolutionised our view of Solar System satellites, arguably matching their scientific importance with that of their planet. While Cassini-Huygens has made big surprises in revealing Titan's organically rich environment and Enceladus' cryovolcanism, the mission's success naturally leads us to further probe these findings. We advocate the acknowledgement of Titan and Enceladus science as highly relevant to ESA's long-term roadmap, as logical follow-on to Cassini-Huygens. In this white paper, we will outline important science questions regarding these satellites and identify the pertinent science themes we recommend ESA cover during the Voyage 2050 planning cycle. Addressing these science themes would make major advancements to the present knowledge we have about the Solar System, its formation, evolution and likelihood that other habitable environments exist outside the Earth's biosphere.

The texture, composition, and morphology of dunes observed in the equatorial regions of Titan may reflect present and/or past climatic conditions. Determining the physio-chemical properties and the morphodynamics of Titan's dunes is therefore essential to understanding of the climatic and geological history of the largest moon of Saturn. We quantitatively derived average surface properties of dune and interdune areas (texture, composition) from modeling of the microwave backscattered signal and Monte-Carlo inversion of the despeckled Cassini/SAR data over Titan's three largest sand seas: Belet, Shangri-La and Fensal. We present the first analysis of the backscatter functions extracted from despeckled SAR images that cover such a large range in incidence angles, including data from the beginning of the Cassini mission up to its Grand Finale. We show that dunes and interdunes have significantly different physical properties. Dunes are found to be more microwave absorbent than interdunes. Additionally, potential secondary bedforms, such as ripples and avalanches, may have been detected, providing potential evidence for currently active dunes and sediment transport. Our modelling shows that the interdunes have multi-scale roughnesses with higher dielectric constants than the dunes which have a low dielectric constant consistent with organic sand. The radar brightness of the interdunes can be explained by the presence of a shallow layer of significantly larger organic grains, possibly non-mobilized by the winds. {Together, our} findings suggest that Titan's sand seas evolve under the current multi-directional wind regimes with dunes that elongate with their crests aligned in the residual drift direction.

In this white paper, we present a cross-section of important scientific questions that remain partially or completely unanswered, ranging from Titan exosphere to the deep interior, and we detail which instrumentation and mission scenarios should be used to answer them. Our intention is to formulate the science goals for the next generation of planetary missions to Titan in order to prepare the future exploration of the moon. The ESA L-class mission concept that we propose is composed of a Titan orbiter and at least an in situ element (lake lander and/or drone(s)).

Motivated by possible atomic origins of the unidentified emission line detected at 3.55 keV to 3.57 keV in a stacked spectrum of galaxy clusters (Bulbul et al. 2014), an electron beam ion trap (EBIT) was used to investigate the resonant dielectronic recombination (DR) process in highly-charged argon ions as a possible contributor to the emission feature. The He-like Ar DR-induced transition 1s$^2$2l - 1s2l3l$^\prime$ was suggested to produce a 3.62 keV photon (Bulbul et al. 2014) near the unidentified line at 3.57 keV and was the starting point of our investigation. The collisional-radiative model NOMAD was used to create synthetic spectra for comparison with both our EBIT measurements and with spectra produced with the AtomDB database/Astrophysical Plasma Emission Code (APEC) used in the Bulbul et al. (2014) work. Excellent agreement was found between the NOMAD and EBIT spectra, providing a high level of confidence in the atomic data used. Comparison of the NOMAD and APEC spectra revealed a number of missing features in the AtomDB database near the unidentified line. At an electron temperature of $T_e$ = 1.72 keV, the inclusion of the missing lines in AtomDB increases the total flux in the 3.5 keV to 3.66 keV energy band by a factor of 2. While important, this extra emission is not enough to explain the unidentified line found in the galaxy cluster spectra.

Context. Comets are primitive objects, remnants of the volatile-rich planetesimals from which the solar system condensed. Knowing their structure and composition is thus crucial for the understanding of our origins. After the successful landing of Philae on the nucleus of 67P/Churyumov-Gerasimenko in November 2014, for the first time, the Rosetta mission provided the opportunity to measure the low frequency electrical properties of a cometary mantle with the permittivity probe SESAME-PP (Surface Electric Sounding and Acoustic Monitoring Experiment - Permittivity Probe). Aims. In this paper, we conduct an in-depth analysis of the data from active measurements collected by SESAME-PP at Abydos, which is the final landing site of Philae, to constrain the porosity and, to a lesser extent, the composition of the surface material down to a depth of about 1 meter. Methods. SESAME-PP observations on the surface are then analyzed by comparison with data acquired during the descent toward the nucleus and with numerical simulations that explore different possible attitudes and environments of Philae at Abydos using a method called the Capacity-Influence Matrix Method. Results. Reasonably assuming that the two receiving electrode channels have not drifted with respect to each other during the ten-year journey of the Rosetta probe to the comet, we constrain the dielectric constant of the first meter below the surface at Abydos to be > 2.45 p/m 0.20, which is consistent with a porosity < 50% if the dust phase is analogous to carbonaceous chondrites and < 75% in the case of less primitive ordinary chondrites. This indicates that the near surface of the nucleus of 67P/Churyumov-Gerasimenko nucleus is more compacted than its interior and suggests that it could consist of a sintered dust-ice layer.