To understand the history and formation mechanisms of galaxies it is crucial to determine their current multidimensional structure. Here we focus on stellar population properties, such as metallicity and [$\alpha$/Fe] enhancement. We devise a new technique to recover the distribution of these parameters using spatially resolved, line-of-sight averaged data. Our chemodynamical method is based on the made-to-measure (M2M) framework and results in an $N$-body model for the abundance distribution. We test our method on a mock dataset and find that the radial and azimuthal profiles are well-recovered, however only the overall shape of the vertical profile matches the true profile. We apply our procedure to spatially resolved maps of mean [Z/H] and [$\alpha$/Fe] for the Andromeda Galaxy, using an earlier barred dynamical model of M31. We found that the metallicity is enhanced along the bar, with possible maxima at the ansae. In the edge-on view the [Z/H] distribution has an X shape due to the boxy/peanut bulge; the average vertical metallicity gradient is equal to $-0.132\pm0.006$ dex/kpc. We identify a metallicity-enhanced ring around the bar which also has relatively lower [$\alpha$/Fe]. The highest [$\alpha$/Fe] is found in the centre, due to the classical bulge. Away from the centre, the $\alpha$-overabundance in the bar region increases with height, which could be an indication of a thick disc. We argue that the galaxy assembly resulted in a sharp peak of metallicity in the central few hundred parsecs and a more gentle negative gradient in the remaining disc, but no [$\alpha$/Fe] gradient. The formation of the bar lead to the re-arrangement of the [Z/H] distribution, causing a flat gradient along the bar. Subsequent star formation close to the bar ends may have produced the metallicity enhancements at the ansae and the [Z/H] enhanced lower-$\alpha$ ring.

Bars in galaxies may form not only through instability, but also as a result of an interaction with another galaxy. In particular, they may appear in disky dwarf galaxies interacting with Milky Way-like galaxies. Here we report the results of N-body/SPH simulations of such dwarfs orbiting in the static potential of a larger galaxy. We used several models of the dwarf galaxy, all of the same mass, but covering a large range of gas fractions: 0, 30 and 70%. We also tested the impact of subgrid star formation processes. In all cases bars of similar length formed in the stellar disk of the dwarfs at the first pericenter passage. However, unexpectedly, the gaseous component remained approximately axisymmetric and unaffected by the bar potential. The bar properties did not change significantly between two consecutive pericenters. The impact of the later encounters with the host depends strongly on the exact orientation of the bar at the pericenter. When the bar is spun up by the tidal force torque, it is also shortened. Conversely, if it is slowed down, it gets longer. In the models with a low gas fraction the bars were more pronounced and survived until the end of the simulations, while in the dwarfs with a high gas fraction the bars were destroyed after the second or third pericenter passage. In terms of the ratio of the corotation radius to the bar length, the bars are slow, and remain so independently of the encounters with the host.

Bars in galaxies may develop through a global instability or due to an interaction with another system. We study bar formation in disky dwarf galaxies orbiting a Milky Way-like galaxy. We employ $N$-body simulations to study the impact of initial orbital parameters: the size of the dwarf galaxy orbit and the inclination of its disc with respect to the orbital plane. In all cases a bar develops in the center of the dwarf during the first pericenter on its orbit around the host. Between subsequent pericenter passages the bars are stable, but at the pericenters they are usually weakened and shortened. The initial properties and details of the further evolution of the bars depend heavily on the orbital configuration. We find that for the exactly prograde orientation, the strongest bar is formed for the intermediate-size orbit. On the tighter orbit, the disc is too disturbed and stripped to form a strong bar. On the wider orbit, the tidal interaction is too weak. The dependence on the disc inclination is such that weaker bars form in more inclined discs. The bars experience either a very weak buckling or none at all. We do not observe any secular evolution, possibly because the dwarfs are perturbed at each pericenter passage. The rotation speed of the bars can be classified as slow ($R_\mathrm{CR}/l_\mathrm{bar}\sim2-3$). We attribute this to the loss of a significant fraction of the disc's rotation during the encounter with the host galaxy.

Orbits are the key building blocks of any density distribution and their study helps us understand the kinematical structure and the evolution of galaxies. Here we investigate orbits in a tidally induced bar of a dwarf galaxy, using an $N$-body simulation of an initially disky dwarf galaxy orbiting a Milky Way-like host. After the first pericenter passage, a tidally induced bar forms in the stellar component of the dwarf. The bar evolution is different than in isolated galaxies and our analysis focuses on the period before it buckles. We study the orbits in terms of their dominant frequencies, which we calculate in a Cartesian coordinate frame rotating with the bar. Apart from the well-known x$_1$ orbits we find many other types, mostly with boxy shapes of various degree of elongation. Some of them are also near-periodic, admitting frequency ratios of 4/3, 3/2 and 5/3. The box orbits have various degrees of vertical thickness but only a relatively small fraction of those have banana (i.e. smile/frown) or infinity-symbol shapes in the edge-on view. In the very center we also find orbits known from the potential of triaxial ellipsoids. The elongation of the orbits grows with distance from the center of the bar in agreement with the variation of the shape of the density distribution. Our classification of orbits leads to the conclusion that more than $80 \%$ of them have boxy shapes, while only $8 \%$ have shapes of classical x$_1$ orbits.

Using N-body simulations we study the formation and evolution of tidally induced bars in disky galaxies in clusters. Our progenitor is a massive, late-type galaxy similar to the Milky Way, composed of an exponential disk and an NFW dark matter halo. We place the galaxy on four different orbits in a Virgo-like cluster and evolve it for 10 Gyr. As a reference case we also evolve the same model in isolation. Tidally induced bars form on all orbits soon after the first pericenter passage and survive until the end of the evolution. They appear earlier, are stronger, longer and have lower pattern speeds for tighter orbits. Only for the tightest orbit the properties of the bar are controlled by the orientation of the tidal torque from the cluster at pericenters. The mechanism behind the formation of the bars is the angular momentum transfer from the galaxy stellar component to its halo. All bars undergo extended periods of buckling instability that occur earlier and lead to more pronounced boxy/peanut shapes when the tidal forces are stronger. Using all simulation outputs of galaxies at different evolutionary stages we construct a toy model of the galaxy population in the cluster and measure the average bar strength and bar fraction as a function of clustercentric radius. Both are found to be mildly decreasing functions of radius. We conclude that tidal forces can trigger bar formation in cluster cores, but not in the outskirts, and thus cause larger concentrations of barred galaxies towards cluster center.

A tidal radius is a distance from a satellite orbiting in a host potential beyond which its material is stripped by the tidal force. We derive a revised expression for the tidal radius of a rotating satellite which properly takes into account the possibility of prograde and retrograde orbits of stars. Besides the eccentricity of the satellite orbit, the tidal radius depends also on the ratio of the satellite internal angular velocity to the orbital angular velocity. We compare our formula to the results of two $N$-body simulations of dwarf galaxies orbiting a Milky Way-like host on a prograde and retrograde orbit. The tidal radius for the retrograde case is larger than for the prograde. We introduce a kinematic radius separating stars still orbiting the dwarf galaxy from those already stripped and following the potential of the host galaxy. We find that the tidal radius matches very well the kinematic radius. Our results provide a connection between the formalism of the tidal radius derivation and the theory of resonant stripping.

Using numerical analysis of fundamental frequencies we study the orbital structure of a tidally induced bar formed in a simulated dwarf galaxy orbiting a Milky Way-like host. We find that only about 10% of stars have frequencies compatible with x1 orbits, the classical periodic orbits in a barred potential. The rest of the stars follows box orbits parallel to the bar, with varying degree of elongation.

Using N-body simulations we study the tidal evolution of initially disky dwarf galaxies orbiting a Milky Way-like host, a process known to lead to the formation of dwarf spheroidal galaxies. We focus on the effect of the orientation of the dwarf galaxy disk's angular momentum with respect to the orbital one and find very strong dependence of the evolution on this parameter. We consider four different orientations: the exactly prograde, the exactly retrograde and two intermediate ones. Tidal evolution is strongest for the exactly prograde and weakest for the exactly retrograde orbit. In the prograde case the stellar component forms a strong bar and remains prolate until the end of the simulation, while its rotation is very quickly replaced by random motions of the stars. In the retrograde case the dwarf remains oblate, does not form a bar and loses rotation very slowly. In the two cases of intermediate orientation of the disk, the evolution is between the two extremes, suggesting a monotonic dependence on the inclination. We interpret the results in terms of the resonance between the angular velocity of the stars in the dwarf and its orbital motion by comparing the measurements from simulations to semi-analytic predictions. We conclude that resonant effects are the most important mechanism underlying the tidal evolution of disky dwarf galaxies.

Using N-body simulations we study the phenomenon of radial orbit instability occurring in dark matter haloes of the size of a dwarf galaxy. We carried out simulations of seven spherical models, with the same standard NFW density profile but different anisotropy profiles of particle orbits. Four of them underwent instability: two with a constant positive anisotropy, one with an anisotropic core and an isotropic envelope and one with a very small isotropic core and an anisotropic envelope. Haloes affected by the instability become approximately axisymmetric and prolate, with the profile of the shortest-to-longest axis ratio increasing with radius. The lower limit for the central value of this axis ratio is 0.3 for an NFW halo. The density profiles of the haloes did not change significantly, whereas the velocity distributions became axisymmetric. The total angular momentum rose due to large-amplitude oscillations of its components perpendicular to the symmetry axis of the halo. We also studied orbits of individual particles assigning them to classical orbit families in triaxial potentials. We find that the membership of a given particle in a family depends on its initial total angular momentum and its components along the principal axes of matter distribution.

Using N-body simulations, we study the properties of a bar induced in a dwarf galaxy as a result of tidal interaction with the Milky Way. The dwarf is initially composed of a disk embedded in a dark matter halo and we follow its evolution on a typical orbit for 10 Gyr. It undergoes an evolution typical of tidally stirred dwarf galaxies: it loses mass, the stellar component transforms from a disk to a spheroid and the rotation of the stars is partially replaced by random motions. A tidally induced bar forms at the first pericentre passage and survives until the end of the evolution. Fourier decomposition of the distribution of stars reveals that only even modes are significant and preserve a hierarchy so that the bar mode is always the strongest. They show a characteristic profile with a maximum, similar to simulated bars forming in isolated galaxies and observed bars in real galaxies. We adopt the maximum of the bar mode as a measure of the bar strength and we estimate the bar length by comparing the density profiles along the bar and perpendicular to it. Both the bar strength and the bar length decrease with time, mainly at pericentres, as a result of tidal torques acting at those times and not to secular evolution. The pattern speed of the bar varies significantly on a time scale of 1 Gyr and seems to be fully controlled by the orientation of the tidal torque from the Milky Way. The bar is never tidally locked but we discover a hint of a 5/2 orbital resonance between the third and fourth pericentre passage. The speed of the bar expressed in terms of the ratio of the bar length to the corotation radius decreases in the long run so that the bar changes from initially rather fast to slow in the later stages. The boxy/peanut shape is clearly visible in the edge-on view between the second and third pericentre and its occurrence is preceded by a short period of buckling instability.

We present a phenomenological description of the properties of tidal tails forming around dwarf galaxies orbiting the Milky Way. For this purpose we use collisionless N-body simulations of dwarfs initially composed of a disk embedded in an NFW dark matter halo. The dwarfs are placed on seven orbits around the Milky Way-like host, differing in size and eccentricity, and their evolution is followed for 10 Gyr. In addition to the well-studied morphological and dynamical transformation of the dwarf's main body, the tidal stripping causes them to lose a substantial fraction of mass both in dark matter and stars which form pronounced tidal tails. We focus on the properties of the stellar component of the tidal tails thus formed. We first discuss the break radii in the stellar density profile defining the transition to tidal tails as the radii where the profile becomes shallower and relate them to the classically defined tidal radii. We then calculate the relative density and velocity of the tails at a few break radii as a function of the orbital phase. Next, we measure the orientation of the tails with respect to an observer placed at the centre of the Milky Way. The tails are perpendicular to this line of sight only for a short period of time near the pericentre. For most of the time the angles between the tails and this line of sight are low, with orbit-averaged medians below 42 degrees for all, even the almost circular orbit. The median angle is typically lower while the maximum relative density higher for more eccentric orbits. The combined effects of relative density and orientation of the tails suggest that they should be easiest to detect for dwarf galaxies soon after their pericentre passage.