The radius of the L chondrite parent body, its formation time, and its evolution history are determined by fitting theoretical models to empirical data of radioisotopic chronometers for L chondrites. A simplified evolution model for the L chondrite parent body is constructed considering sintering of the initially porous material, temperature dependent heat conductivity, and an insulating regolith layer. Such models are fitted to thermochronological data of five meteorites for which precise data for the Hf-W and U-Pb-Pb thermochronometers have been published. A set of parameters for the L chondrite parent body is found that yields excellent agreement (within error bounds) between a thermal evolution model and thermochonological data. Empirical cooling rate data also agree with the model results within error bounds such that there is no conflict between cooling rate data and the onion-shell model. Two models are found to be compatible with the presently available empirical data: One model with a radius of 115 km and a formation time of 1.89 Ma after CAI formation, another model with 160 km radius and formation time of 1.835 Ma. The central temperature of the smaller body remains well below the Ni,Fe-FeS eutectic melting temperature and is consistent with the apparent non-existence of primitive achondrites related to the L chondrites. For the bigger model incipient melting in the central core region is predicted which opens the possibility that primitive achondrites related to L chondrites could be found.

Understanding the compaction and differentiation of the planetesimals and protoplanets from the Asteroid Belt and the terrestrial planet region of the Solar System requires a reliable modeling of their internal thermal evolution. An important ingredient for this is a detailed knowledge of the heat conductivity of the chondritic mixture of minerals and metal in planetesimals. The temperature dependence of the heat conductivity is evaluated here from the properties of its mixture components by a theoretical model. This allows to predict the temperature dependent heat conductivity for the full range of observed meteoritic compositions and also for possible other compositions. For this purpose, published results on the temperature dependence of heat conductivity of the mineral components found in chondritic material are fitted to the model of Callaway for heat conductivity in solids by phonons. For the Ni,Fe-alloy published laboratory data are used. The heat conductivity of chondritic material then is calculated by means of mixing-rules. The role of micro-cracks is studied which increase the importance of wall-scattering for phonon-based heat conductivity. The model is applied to published data on heat conductivity of individual chondrites. The experimental data for the dependence of the heat conductivity on temperature can be reproduced rather well by the model if the heat conductivity is calculated for the composition of the meteorites. It is found that micro-cracks have a significant impact on the temperature dependence of the heat conductivity because of their reduction of phonon scattering length.

A high fraction of carbon bound in solid carbonaceous material is observed to exist in bodies formed in the cold outskirts of the solar nebula, while bodies in the terrestrial planets region contain nearly none. We study the fate of the carbonaceous material during the spiral-in of matter as the sun accretes matter from the solar nebula. From observational data on the composition of the dust component in comets and interplanetary dust particles, and from data on pyrolysis experiments, we construct a model for the composition of the pristine carbonaceous material in the outer parts of the solar nebula. We study the pyrolysis of the refractory and volatile organic component and the concomitant release of high-molecular-weight hydrocarbons under quiescent conditions of disk evolution where matter migrates inwards. We also study the decomposition and oxidation of the carbonaceous material during violent flash heating events, which are thought to be responsible for the formation of chondrules. It is found that the complex hydrocarbon components are removed from the solid disk matter at temperatures between 250 and 400 K, while the amorphous carbon component survives up to 1200 K. Without efficient carbon destruction during flash-heating associated with chondrule formation the carbon abundance of terrestrial planets, except for Mercury, would be not as low as it is found in cosmochemical studies. Chondrule formation seems to be a process that is crucial for the carbon-poor composition of the material of terrestrial planets.

Optical constants of non-stoichiometric amorphous magnesium-iron silicates are determined. It is demonstrated that these can well reproduce the observed mid-infrared emission spectra of evolved stars. Stoichiometric and non-stoichiometric amorphous magnesium-iron silicate films are fabricated by pulsed laser deposition. Transmittance and ellipsometry measurements are performed in the wavelength range between 2 and 200 $\mu$m and 1.7 and 33 $\mu$m, respectively. Optical constants are derived from transmittance and ellipsometric $\Psi$ and $\Delta$ spectra by means of oscillator models. The optical constants are applied in radiative transfer models for examining reproducibility of the observed spectral features of circumstellar dust shells around supergiants. The spectra of four selected supergiants are dominated by amorphous silicate dust emission in the wavelength range of 9 and 25 $\mu$m. To obtain a good fit to the observed spectra, we take into account amorphous corundum and metallic iron particles as additional dust components to account for dust emission at $\lambda<8 \mu$m and in between the two silicate features. For each of the objects, a set of model parameters (dust mass, condensation temperature) is derived by an automated optimization procedure which well reproduces the observation. Consequently, our model spectra using the new optical data find that the silicate bands at $\approx 10$ and $\approx 18 \mu$m depend on the magnesium and iron ratio in the silicate system, and that a good fit requires a significant iron content of the amorphous silicate dust component to reproduce the observed peak positions and shape of the silicate bands.

We study whether the condensation of silicate dust in Mira envelopes could be caused by cluster formation by the abundant SiO molecules. For a simplified model of the pulsational motions of matter in the the outer layers of a Mira variable which is guided by a numerical model for Mira pulsations, the equations of dust nucleation and growth are solved in the co-moving frame of a fixed mass element. It is assumed that seed particles form by clustering of SiO molecules. The calculation of the nucleation rate is based on the experimental data of Nuth and Donn (1982). The quantity of dust formed is calculated by a moment method and the calculation of radiation pressure on the dusty gas is based on a dirty silicate model. Dust nucleation occurs in the model at the upper culmination of the trajectory of a gas parcel where it stays for a considerable time at low temperatures while subsequent dust growth occurs during the descending part of the motion and continues after the next shock reversed motion. It is found that sufficient dust forms that radiation pressure exceeds gravitational pull of the stars such that the mass element is finally driven out of the star. Nucleation of dust particles by clustering of the abundant SiO molecules could be the mechanism that triggers silicate dust formation in Miras.

The construction of models for the internal constitution and the temporal evolution of large planetesimals, the parent bodies of chondrites, requires information on the heat conductivity of the complex mixture of minerals and iron metal found in chondrites. It is attempted to evaluate the heat conductivity of a multi-component mineral mixture and granular medium from the heat conductivities of its mixture components. Random mixtures of solids with chondritic composition and packings of spheres are numerically generated. The heat conduction equation is solved in high spatial resolution for a test cube filled with such matter. From the heat flux through the cube the heat conductivity of the mixture is derived. The model results for porous material are consistent with data for compacted sandstone, but are at odds with measurements for H and L chondrites. The discrepancy is traced back to shock modification of the currently available meteoritic material by impacts on the parent body over the last 4.5 Ga. This causes numerous micro-cracks that act as additional barriers for heat transfer. The void structure in meteorites is different from that which probably existed in the pristine material of the parent bodies. The results obtained for the heat conductivity of the pristine material are used for calculating models for the evolution of the H chondrite parent body which are fitted to the cooling data of a number of H chondrites. The fit to the data good.

Reconstruction of the thermal history of individual meteorites which can be assigned to the same parent body allows to derive general characteristics of the parent body, which hold important clues on the planetary formation process. This requires to construct models for the heating of such bodies by short lived radioactives, in particular by 26Al, and its cooling by heat conduction, which then are compared with the cooling histories of the meteorites. The heat conductivity of the planetesimal material depends critically on the porosity of the chondritic material and changes by sintering of the material at elevated temperatures and pressures. Compaction of a granular material is a key process for the thermal history of the parent bodies of meteorites. The modelling of the compaction process is improved by applying concepts originally developed for hot isostatic pressing in metallurgical processes. It is extended to a binary mixture of matrix and chondrules, as observed in chondrites. By comparison with published data on sintering experiments it is shown that the algorithm allows a sufficiently accurate modelling of the compaction of silicate material. It is shown that the characteristic temperature at which sintering occurs is different for matrix or chondrule dominated precursor material. We apply the new method to model the thermal evolution of the parent body of the H chondrites and determine an improved optimized set of model parameters for this body.

Radioisotopic ages for meteorites and their components provide constraints on the evolution of small bodies: timescales of accretion, thermal and aqueous metamorphism, differentiation, cooling and impact metamorphism. Realising that the decay heat of short-lived nuclides (e.g. 26Al, 60Fe), was the main heat source driving differentiation and metamorphism, thermal modeling of small bodies is of utmost importance to set individual meteorite age data into the general context of the thermal evolution of their parent bodies, and to derive general conclusions about the nature of planetary building blocks in the early solar system. As a general result, modelling easily explains that iron meteorites are older than chondrites, as early formed planetesimals experienced a higher concentration of short-lived nuclides and more severe heating. However, core formation processes may also extend to 10 Ma after formation of Calcium-Aluminum-rich inclusions (CAIs). A general effect of the porous nature of the starting material is that relatively small bodies (< few km) will also differentiate if they form within 2 Ma after CAIs. A particular interesting feature to be explored is the possibility that some chondrites may derive from the outer undifferentiated layers of asteroids that are differentiated in their interiors. This could explain the presence of remnant magnetization in some chondrites due to a planetary magnetic field.

Clustering of the abundant SiO molecules has been discussed as a possible mechanism of seed particle formation for silicate dust in stellar outflows with an oxygen rich element mixture. Previous results indicated that condensation temperatures based on this mechanism are significant lower than what is really observed. This negative result strongly rests on experimental data on vapour pressure of SiO. New determinations show the older data to be seriously in error. Here we aim to check with improved data the possibility that SiO nucleation triggers the cosmic silicate dust formation. First we present results of our measurements of vapour pressure of solid SiO. Second, we use the improved vapour pressure data to re-calibrate existing experimental data on SiO nucleation from the literature. Third, we use the re-calibrated data on SiO nucleation in a simple model for dust-driven winds to determine the condensation temperature of silicate in stellar outflows from AGB stars. We show that onset of nucleation under circumstellar conditions commences at higher temperature than was previously found. Calculated condensation temperatures are still by about 100 K lower than observed ones, but this may be due to the greenhouse effect of silicate dust temperatures. The assumption that the onset of silicate dust formation in late-type M stars is triggered by cluster formation of SiO is compatible with dust condensation temperatures derived from IR observations.

The Mass loss of Evolved StarS (MESS) sample offers a selection of 78 Asymptotic Giant Branch (AGB) stars and Red Supergiants (RSGs) observed with the PACS photometer on-board Herschel at 70 and 160 {\mu}m. For most of these objects, the dusty AGB wind differs from spherical symmetry and the wind shape can be subdivided into four classes. In the present paper we concentrate on the influence of a companion on the morphology of the stellar wind. Literature was searched to find binaries in the MESS sample and these are subsequently linked to their wind-morphology class to assert that the binaries are not distributed equally among the classes. In the second part of the paper we concentrate on the circumstellar environment of the two prominent objects R Aqr and W Aql. Each shows a characteristic signature of a companion interaction with the stellar wind. For the symbiotic star R Aqr, PACS revealed two perfectly opposing arms which in part reflect the previously observed ring-shaped nebula in the optical. However, from the far-IR there is evidence that the emitting region is elliptical rather than circular. The outline of the wind of W Aql seems to follow a large Archimedean spiral formed by the orbit of the companion but also shows strong indications of an interaction with the interstellar medium. The nature of the companion of W Aql was investigated and the magnitude of the orbital period supports the size of the spiral outline.

Silicate minerals belong to the most abundant solids in space. Their formation becomes difficult at the transition from the oxygen rich chemistry of M-stars to the carbon rich chemistry of C-stars. In the intermediate type S-stars oxygen and carbon are consumed by CO and SiO molecule formation, and left-over oxygen to build the SiO4-tetrahedra of silicates becomes scarce. Then SiO molecules may directly condense into solid SiO. The IR absorption spectrum of solid SiO differs from that of silicates by the absence of Si-O-Si bending modes at 18 mum while the absorption by Si-O bond stretching modes at 10 mum is present. Such characteristics are observed in a number of S-star spectra. We suggest that this observation may be explained by formation of solid SiO as a major dust component at C/O abundance ratios close to unity. We determine the IR absorption properties of solid SiO by laboratory transmission measurements of thin SiO films produced by vapour deposition on a Si(111) wafer. From the measured spectra the dielectric function of SiO is derived. The results are used in model calculations of radiative transfer in circumstellar dust shells with solid SiO dust. Comparison of synthetic and observed spectra shows that reasonable agreement is obtained between the main spectral characteristics of emission bands due to solid SiO and an emission band centred on 10 mum, but without accompanying 18 mum band, observed in some S-stars. We propose that solid SiO is the carrier material of this 10 mum spectral feature.

The cooling histories of individual meteorites can be empirically reconstructed by using ages from different radioisotopic chronometers with distinct closure temperatures. For a group of meteorites derived from a single parent body such data permit the reconstruction of the cooling history and properties of that body. Particularly suited are H chondrites because precise radiometric ages over a wide range of closure temperatures are available. A thermal evolution model for the H chondrite parent body is constructed by using all H chondrites for which at least three different radiometric ages are available. Several key parameters determining the thermal evolution of the H chondrite parent body and the unknown burial depths of the H chondrites are varied until an optimal fit is obtained. The fit is performed by an 'evolution algorithm'. Empirical data for eight samples are used for which radiometric ages are available for at least three different closure temperatures. A set of parameters for the H chondrite parent body is found that yields excellent agreement (within error bounds) between the thermal evolution model and empirical data of six of the examined eight chondrites. The new thermal model constrains the radius and formation time of the H chondrite parent body (possibly (6) Hebe), the initial burial depths of the individual H chondrites, the average surface temperature of the body, the average initial porosity of the material the body accreted from, and the initial 60Fe content of the H chondrite parent body.

The major aim of this study is to assess the effects of sintering of initially porous material on the thermal evolution of planetesimals, and to constrain the values of basic parameters that determined the structure and evolution of the H chondrite parent body. A new code is presented for modeling the thermal evolution of ordinary chondrite parent bodies that initially are highly porous and undergo sintering by hot pressing as they are heated by decay of radioactive nuclei. The pressure and temperature stratification in the interior of the bodies is calculated by solving the equations of hydrostatic equilibrium and energy transport. The decrease of porosity of the granular material by hot pressing due to self-gravity is followed by solving a set of equations for the sintering of powder materials. For the heat conductivity of granular material we combine recently measured data for highly porous powder materials, relevant for the surface layers of planetesimals, with data for heat conductivity of chondrite material, relevant for the strongly sintered material in deeper layers. To demonstrate the capability of our new model, the thermal evolution of the H chondrite parent body was reconstructed. The model starts with a porous body that is later compacted first by 'cold pressing' at low temperatures and then by 'hot pressing' for temperatures above \approx 700 K, i.e., the threshold temperature for sintering of silicates. The thermal model was fitted to the well constrained cooling histories of the two H chondrites Kernouve (H6) and Richardton (H5).

A review of the abundances and condensation temperatures of the elements and their nuclides in the solar nebula and in chondritic meteorites. Abundances of the elements in some neighboring stars are also discussed.

We present some important conclusions from recent calculations pertaining to the collapse of rotating molecular cloud cores with axial symmetry, corresponding to evolution of young stellar objects through classes 0 and begin of class I. Three main issues have been addressed: (1) The typical timescale for building up a preplanetary disk - once more it turned out that it is of the order of one free-fall time which is decisively shorter than the widely assumed timescale related to the so-called 'inside-out collapse'; (2) Redistribution of angular momentum and the accompanying dissipation of kinetic (rotational) energy - together these processes govern the mechanical and thermal evolution of the protostellar core to a large extent; (3) The origin of calcium-aluminium-rich inclusions (CAIs) - due to the specific pattern of the accretion flow, material that has undergone substantial chemical and mineralogical modifications in the hot (exceeding 900 K) interior of the protostellar core may have a good chance to be advectively transported outward into the cooler remote parts (beyond 4 AU, say) of the growing disk and to survive there until it is incorporated into a meteoritic body.

The detection of significant concentrations of crystalline silicates in comets indicates an extensive radial mixing in the primordial solar nebula. In studying the radial transport of matter within protoplanetary disks by numerical model calculations it is essential to resolve the vertical disk structure since matter is mixed radially inward and outward by a complex 2-dimensional flow pattern that is superposed on the global inward directed accretion flow. A numerical model calculation for a protoplanetary accretion disks with radial and vertical mixing is performed in the 1+1-dimensional approximation. The global 2D velocity field of the disk is calculated from an analytical solution for the meridional flow pattern, that exhibits an inward drift in the upper layers and an outward drift in the midplane in most parts of the disk. The disk model is based on the $\beta$-prescription of viscosity and considers vertical self-gravitation of the disk. The mixing processes are studied for the following species: amorphous silicate grains (forsterite, enstatite) that crystallise by annealing, and carbonaceous grains that are destroyed by surface reactions with OH molecules at elevated temperatures. Considerable fractions of crystallised silicates and methane (formed as a by-product of carbon combustion) are transported to the site of comet formation far from the protosun within a period of 10$^6$ yrs. The 2-dimensional transport of tracers in the solar nebula offers a natural explanation for the presence of crystalline silicates in comets and the significant portions of crystalline silicates observed in accretion disks around young stellar objects.

The basic mechanism responsible for the widespread condensation of MgS in the outflows from carbon rich stars on the tip of the AGB is discussed with the aim of developing a condensation model that can be applied in model calculations of dust formation in stellar winds. The different possibilities how MgS may be formed in the chemical environment of outflows from carbon stars are explored by some thermochemical calculations and by a detailed analysis of the growth kinetics of grains in stellar winds. The optical properties of core-mantle grains with a MgS mantle are calculated to demonstrate that such grains reproduce the structure of the observed 30 $\mu$m feature. These considerations are complemented by model calculations of circumstellar dust shells around carbon stars. It is argued that MgS is formed via precipitation on silicon carbide grains. This formation mechanism explains some of the basic observed features of MgS condensation in dust shells around carbon stars. A weak secondary peak at about 33 ... 36 $\mu$m is shown to exist in certain cases if MgS forms a coating on SiC.

The abundance evolution of interstellar dust species originating from stellar sources and from condensation in molecular clouds in the local interstellar medium of the Milky Way is studied and the input of dust material to the Solar System is determined. A one-zone chemical evolution model of the Milky Way for the elemental composition of the disk combined with an evolution model for its interstellar dust component similar to that of Dwek (1998) is developed. The dust model considers dust-mass return from AGB stars as calculated from synthetic AGB models combined with models for dust condensation in stellar outflows. Supernova dust formation is included in a simple parameterized form which is gauged by observed abundances of presolar dust grains with supernova origin. For dust growth in the ISM a simple method is developed for coupling this with disk and dust evolution models. The time evolution of the abundance of the following dust species is followed in the model: silicate, carbon, silicon carbide, and iron dust from AGB stars and from SNe as well as silicate, carbon, and iron dust grown in molecular clouds. It is shown that the interstellar dust population is dominated by dust accreted in molecular clouds; most of the dust material entering the Solar System at its formation does not show isotopic abundance anomalies of the refractory elements, i.e., inconspicuous isotopic abundances do not point to a Solar System origin of dust grains. The observed abundance ratios of presolar dust grains formed in SN ejecta and in AGB star outflows requires that for the ejecta from SNe the fraction of refractory elements condensed into dust is 0.15 for carbon dust and is quite small ($\sim10^{-4}$) for other dust species.