We exploited observational constraints on stars, gas and nucleosynthesis ashes for the closest region of recent massive-star formation, Scorpius-Centaurus OB2, and combined them with 3D hydrodynamical simulations, in order to address physics and history for the case of the Scorpius-Centaurus superbubble. We used published cold gas observations through PLANCK survey data processing, HERSCHEL and APEX, continuum and molecular line observations. We analysed the Galactic All Sky Survey (GASS) to investigate shell structures in atomic hydrogen, and used HIPPARCOS and Gaia data in combination with interstellar absorption against stars to obtain new constraints for the distance to the Hi features. Hot gas is traced in soft X-rays via the ROSAT all sky survey. Nucleosynthesis ejecta from massive stars were traced with new INTEGRAL spectrometer observations via 26Al radioactivity. We also performed 3D hydrodynamical simulations for the Sco-Cen superbubble. To investigate the impact of massive star feedback on extended clouds, we simulate the interaction of a turbulent cloud with the hot, pressurised gas in a superbubble. The hot gas fills the tenuous regions of the cloud and compresses the denser parts. Stars formed in these dense clumps would have distinct spatial and kinematic distributions. The combined results from observations and simulations are consistent with a scenario where dense gas was initially distributed in a band elongated in the direction now occupied by the OB association. Superbubbles powered by massive stars would then repeatedly break out of the elongated parent cloud, surround and squash the denser parts of the gas sheet and thus induce more star formation. The expected spatial and kinematic distribution of stars is consistent with observations of Sco-Cen. The scenario might apply to many similar regions in the Galaxy and also to AGN-related superbubbles.

[Abridged] The Lupus I cloud is found between the Upper-Scorpius and the Upper-Centaurus-Lupus sub-groups, where the expanding USco HI shell appears to interact with a bubble currently driven by the winds of the remaining B-stars of UCL. We investigate if the Lupus I molecular could have formed in a colliding flow, and how the kinematics of the cloud might have been influenced by the larger scale gas dynamics. We performed APEX 13CO and C18O observations of three parts of Lupus. We compare these results to the atomic hydrogen data from the GASS HI survey and our dust emission results presented in the previous paper. Based on the velocity information, we present a geometric model for the interaction zone between the USco shell and the UCL wind bubble. We present evidence that the molecular gas of Lupus I is tightly linked to the atomic material of the USco shell. The CO emission in Lupus I is found mainly at velocities in the same range as the HI velocities. Thus, the molecular cloud is co-moving with the expanding USco atomic Hi shell. The gas in the cloud shows a complex kinematic structure with several line-of-sight components that overlay each other. The non-thermal velocity dispersion is in the transonic regime in all parts of the cloud and could be injected by external compression. Our observations and the derived geometric model agree with a scenario where Lupus I is located in the interaction zone between the USco shell and the UCL wind bubble. The kinematics observations are consistent with a scenario where the Lupus I cloud formed via shell instabilities. The particular location of Lupus I between USco and UCL suggests that counter-pressure from the UCL wind bubble and pre-existing density enhancements, perhaps left over from the gas stream that formed the stellar subgroups, may have played a role in its formation.

We characterize the stellar population of the poorly explored young stellar cluster NGC 3293 at the northwestern periphery of the Carina Nebula Complex, in order to evaluate the cluster age and the mass function, and to test claims of an abnormal IMF and a deficit of M <= 2.5 M_sun stars. We performed a deep (70 ksec) X-ray observation of NGC 3293 with Chandra and detected 1026 individual X-ray point sources. We identify counterparts for 74% of the X-ray sources in deep near-infrared images. Our data clearly show that NGC 3293 hosts a large population of solar-mass stars, refuting claims of a lack of M <= 2.5 M_sun stars. The analysis of the color magnitude diagram suggests an age of ~8-10 Myr for the low-mass population of the cluster. There are at least 511 X-ray detected stars with color magnitude positions that are consistent with young stellar members within 7 arcmin of the cluster center. The number ratio of X-ray detected stars in the 1-2 M_sun range versus the M >= 5 M_sun stars (known from optical spectroscopy) is consistent with the expectation from a normal field initial mass function. Most of the early B-type stars and 20% of the later B-type stars are detected as X-ray sources. Our data shows that NGC 3293 is one of the most populous stellar clusters in the entire Carina Nebula Complex. The cluster probably harbored several O-type stars, whose supernova explosions may have had an important impact on the early evolution of the Carina Nebula Complex.

The Lupus I cloud is found between the Upper-Scorpius (USco) and the Upper-Centaurus-Lupus (UCL) sub-groups of the Sco-Cen OB-association, where the expanding USco H I shell appears to interact with a bubble currently driven by the winds of the remaining B-stars of UCL.We want to study how collisions of large-scale interstellar gas flows form and influence new dense clouds in the ISM.We performed LABOCA continuum sub-mm observations of Lupus I that provide for the first time a direct view of the densest, coldest cloud clumps and cores at high angular resolution.We complemented those by Herschel and Planck data from which we constructed column density and temperature maps.We calculated PDFs to characterize the density structure of the cloud.The northern part of Lupus I is found to have on average lower densities and higher temperatures as well as no active star formation.The center-south part harbors dozens of pre-stellar cores where density and temperature reach their maximum and minimum, respectively.Our analysis of the column density PDFs from the Herschel data show double peak profiles for all parts of the cloud which we attribute to an external compression.In those parts with active star formation, the PDF shows a power-law tail at high densities.The PDFs we calculated from our LABOCA data trace the denser parts of the cloud showing one peak and a power-law tail.With LABOCA we find 15 cores with masses between 0.07 and 1.71 Msun and a total mass of ~8 Msun.The total gas and dust mass of the cloud is ~164 Msun and hence 5% of the mass is in cores.From the Herschel and Planck data we find a total mass of ~174 Msun and ~171 Msun, respectively.The position, orientation and elongated shape of Lupus I, the double peak PDFs and the population of pre-stellar and protostellar cores could be explained by the large-scale compression from the advancing USco H I shell and the UCL wind bubble.

Filaments represent a key structure during the early stages of the star formation process. Simulations show filamentary structure commonly formed before and during the formation of cores. Aims. The Serpens Core represents an ideal laboratory to test the state-of-the-art of simulations of turbulent Giant Molecular Clouds. We use Herschel observations of the Serpens Core to compute temperature and column density maps of the region. Among the simulations of Dale et al. (2012), we select the early stages of their Run I, before stellar feedback is initiated, with similar total mass and physical size as the Serpens Core. We derive temperature and column density maps also from the simulations. The observed distribution of column densities of the filaments has been analysed first including and then masking the cores. The same analysis has been performed on the simulations as well. A radial network of filaments has been detected in the Serpens Core. The analysed simulation shows a striking morphological resemblance to the observed structures. The column density distribution of simulated filaments without cores shows only a log-normal distribution, while the observed filaments show a power-law tail. The power-law tail becomes evident in the simulation if one focuses just on the column density distribution of the cores. In contrast, the observed cores show a flat distribution. Even though the simulated and observed filaments are subjectively similar-looking, we find that they behave in very different ways. The simulated filaments are turbulence-dominated regions, the observed filaments are instead self-gravitating structures that will probably fragment into cores.

The Carina Nebula complex (CNC) represents one of the most massive star-forming regions in our Galaxy and shows strong feedback from the high massive stars. We use our Herschel FIR observations to study the properties of the clouds over the entire area of the CNC. The good angular resolution of the Herschel maps corresponds to physical scales of 0.1 - 0.4 pc, and allows us to analyze the small-scale structures of the clouds. The full extent of the CNC was mapped with PACS and SPIRE from 70 to 500 micron. We determine temperatures and column densities at each point in this maps by modeling the observed FIR SEDs. We also derive a map showing the strength of the UV field. We investigate the relation between the cloud properties and the spatial distribution of the high-mass stars, and compute total cloud masses for different density thresholds. Our Herschel maps resolve, for the first time, the small-scale structure of the dense clouds. Several particularly interesting regions, including the prominent pillars south of eta Car, are analyzed in detail. We compare the cloud masses derived from the Herschel data to previous mass estimates based on sub-mm and molecular line data. Our maps also reveal a peculiar "wave"-like pattern in the northern part of the Carina Nebula. Finally, we characterize two prominent cloud complexes at the periphery of our Herschel maps, which are probably molecular clouds in the Galactic background. We find that the density and temperature structure of the clouds in most parts of the CNC is dominated by the strong feedback from the numerous massive stars, rather than random turbulence. Comparing the cloud mass and the star formation rate derived for the CNC to other Galactic star forming regions suggests that the CNC is forming stars in an particularly efficient way. We suggest this to be a consequence of triggered star formation by radiative cloud compression.

Context. The Gum 31 bubble containing the stellar cluster NGC 3324 is a poorly-studied young region close to the Carina Nebula. Aims. We are aiming to characterise the young stellar and protostellar population in and around Gum 31 and to investigate the star-formation process in this region. Methods. We identify candidate young stellar objects from Spitzer, WISE, and Herschel data. Combining these, we analyse the spectral energy distributions of the candidate young stellar objects. With density and temperature maps obtained from Herschel data and comparisons to a 'collect and collapse' scenario for the region we are able to further constrain the characteristics of the region as a whole. Results. 661 candidate young stellar objects are found from WISE data, 91 protostar candidates are detected through Herschel observations in a 1.0 deg x 1.1 deg area. Most of these objects are found in small clusters or are well aligned with the H II bubble. We also identify the sources of Herbig-Haro jets. The infrared morphology of the region suggests that it is part of the larger Carina Nebula complex. Conclusions. The location of the candidate young stellar objects in the rim of the H II bubble is suggestive of their being triggered by a 'collect and collapse' scenario, which agrees well with the observed parameters of the region. Some candidate young stellar objects are found in the heads of pillars, which points towards radiative triggering of star formation. Thus, we find evidence that in the region different mechanisms of triggered star formation are at work. Correcting the number of candidate young stellar objects for contamination we find ~ 600 young stellar objects in Gum 31 above our completeness limit of about 1 M_sol. Extrapolating the intital mass function down to 0.1 M_sol, we estimate a total population of ~ 5000 young stars for the region.

The Carina Nebula represents one of the largest and most active star forming regions known in our Galaxy with numerous very massive stars.Our recently obtained Herschel PACS & SPIRE far-infrared maps cover the full area (about 8.7 deg^2) of the Carina Nebula complex and reveal the population of deeply embedded young stellar objects, most of which are not yet visible in the mid- or near-infrared.We study the properties of the 642 objects that are independently detected as point-like sources in at least two of the five Herschel bands.For those objects that can be identified with apparently single Spitzer counterparts, we use radiative transfer models to derive information about the basic stellar and circumstellar parameters.We find that about 75% of the Herschel-detected YSOs are Class 0 protostars.The luminosities of the Herschel-detected YSOs with SED fits are restricted to values of <=5400 Lsun, their masses (estimated from the radiative transfer modeling) range from about 1 Msun to 10 Msun.Taking the observational limits into account and extrapolating the observed number of Herschel-detected protostars over the IMF suggest that the star formation rate of the CNC is about 0.017 Msun/yr.The spatial distribution of the Herschel YSO candidates is highly inhomogeneous and does not follow the distribution of cloud mass.Most Herschel YSO candidates are found at the irradiated edges of clouds and pillars.This provides support to the picture that the formation of this latest stellar generation is triggered by the advancing ionization fronts.The currently ongoing star formation process forms only low-mass and intermediate-mass stars, but no massive stars.The far-infrared fluxes of the famous object EtaCar are about a factor of two lower than expected from observations with the ISO obtained 15 years ago; this may be due to dynamical changes in the circumstellar dust in the Homunculus Nebula.

The Carina Nebula represents one of the most massive galactic star forming regions and displays a high level of massive star feedback. We used SPIRE and PACS onboard of Herschel to map the full spatial extent of the clouds in the Carina Nebula complex at wavelengths between 70 and 500 micrometer. We determine color temperatures and column densities of the clouds in the complex. Our Herschel maps show that the clouds have a very complex and filamentary structure that is dominated by the radiation and wind feedback from the massive stars. In most locations, the column density of the clouds is N_H < 2x10^22 cm^-2; denser cloud structures are restricted to just a few locations. We find a clear large scale temperature gradient from 35-40 K in the central region to <20 K at the periphery and in the densest parts of individual pillars. The total mass of the clouds seen by Herschel in the central (1 deg radius) region is ~656000 M_sun. A simple radiative transfer model for the global spectral energy distribution suggests that the total mass of all the gas (including a warmer component that is not well traced by Herschel) is <=890000 M_sun. Despite the strong feedback from numerous massive stars that is going on since several million years, there are still several 10000 M_sun of cool cloud material present at column-densities sufficient for further star formation. Comparison of our total gas mass estimates to molecular cloud masses derived from CO line mapping suggests that as much as about 75% of all the gas is in atomic rather than molecular form.

Aims: Jets are excellent signposts for very young embedded protostars, so we want to identify jet-driving protostars as a tracer of the currently forming generation of stars in the Carina Nebula, which is one of the most massive galactic star-forming regions and which is characterised by particularly high levels of massive-star feedback on the surrounding clouds. Methods: We used archive data to construct large (> 2 deg x 2 deg) Spitzer IRAC mosaics of the Carina Nebula and performed a spatially complete search for objects with excesses in the 4.5 micron band, typical of shock-excited molecular hydrogen emission. We also identified the mid-infrared point sources that are the likely drivers of previously discovered Herbig-Haro jets and molecular hydrogen emission line objects. We combined the Spitzer photometry with our recent Herschel far-infrared data to construct the spectral energy distributions, and used the Robitaille radiative-transfer modelling tool to infer the properties of the objects. Results: The radiative-transfer modelling suggests that the jet sources are protostars with masses between ~1 M_sol and ~10 M_sol that are surrounded by circumstellar disks and embedded in circumstellar envelopes. Conclusions: The estimated protostar masses < 10 M_sol suggest that the current star-formation activity in the Carina Nebula is restricted to low- and intermediate-mass stars. More optical than infrared jets can be observed, indicating that star formation predominantly takes place close to the surfaces of clouds.