This is the second article of a series devoted to European Extremely Large Telescope (E-ELT) site characterization. In this article we present the main properties of the parameters involved in high angular resolution observations from the data collected in the site testing campaign of the E-ELT during the Design Study (DS) phase. Observations were made in 2008 and 2009, in the four sites selected to shelter the future E-ELT (characterized under the ELT-DS contract): Aklim mountain in Morocco, Observatorio del Roque de los Muchachos (ORM) in Spain, Mac\'on range in Argentina, and Cerro Ventarrones in Chile. The same techniques, instruments and acquisition procedures were taken on each site. A Multiple Aperture Scintillation Sensor (MASS) and a Differential Image Motion Monitor (DIMM) were installed at each site. Global statistics of the integrated seeing, the free atmosphere seeing, the boundary layer seeing and the isoplanatic angle were studied for each site, and the results are presented here. In order to estimate other important parameters such as the coherence time of the wavefront and the overall parameter "coherence \'etendue" additional information of vertical profiles of the wind speed was needed. Data were retrieved from the National Oceanic and Atmospheric Administration (NOAA) archive. Ground wind speed was measured by Automatic Weather Stations (AWS). More aspects of the turbulence parameters such as their seasonal trend, their nightly evolution and their temporal stability were also obtained and analyzed.

The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow dramatically fainter reference stars to be used, allowing virtually full sky coverage with a natural guide star. This paper also describes a significant improvements in the efficiency of Lucky Imaging, important advances in wavefront reconstruction with curvature sensors and the results of simulations and sensitivity limits. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is likely to be the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.

The Adaptive Optics Lucky Imager (AOLI) is a new instrument under development to demonstrate near diffraction limited imaging in the visible on large ground-based telescopes. We present the adaptive optics system being designed for the instrument comprising a large stroke deformable mirror, fixed component non-linear curvature wavefront sensor and photon-counting EMCCD detectors. We describe the optical design of the wavefront sensor where two photoncounting CCDs provide a total of four reference images. Simulations of the optical characteristics of the system are discussed, with their relevance to low and high order AO systems. The development and optimisation of high-speed wavefront reconstruction algorithms are presented. Finally we discuss the results of simulations to demonstrate the sensitivity of the system.

Generalized Scidar (GS) measurements taken at the Paranal Observatory in November/December 2007 in the context of a site qualification for the future European Extremely Large Telescope E-ELT are re-calibrated to overcome the bias induced on the CN2 profiles by a not correct normalization of the autocorrelation of the scintillation maps that has been recently identified in the GS technique. A complete analysis of the GS corrected measurements as well as of the corrected errors is performed statistically as well as on individual nights and for each time during all nights. The relative errors of the CN2 profiles can reach up to 60% in some narrow temporal windows and some vertical slabs, the total seeing up to 12% and the total integrated turbulence J up to 21%. However, the statistic analysis tells us that the absolute errors of the median values of the total seeing is 0.06 arcsec (relative error 5.6%), for the boundary seeing 0.05 arcsec (relative error 5.6%) and for the seeing in the free atmosphere 0.04 arcsec (relative error 9%). We find that, in spite of the fact that the relative error increases with the height, the boundary and the free atmosphere seeing contribute in an equivalent way to the error on the total seeing in absolute terms. Besides, we find that there are no correlations between the relative errors and the value of the correspondent seeing. The absolute error of the median value of the isoplanatic angle is 0.13 arcsec (relative error 6.9%).

We present the largest database so far of atmospheric optical-turbulence profiles (197035 individual CN2(h)) for an astronomical site, the Roque de los Muchachos Observatory (La Palma, Spain). This C2 (h) database was obtained through generalized-SCIDAR observations at the 1 meter Jacobus Kapteyn telescope from Febrary 2004 to August 2009, obtaining useful data for 211 nights. The overestimation of the turbulence strength induced during the generalized SCIDAR data processing has been analyzed for the different observational configurations. All the individual C2 (h) have been recalibrated to compensate the introduced errors during data treatment following (Avila & Cuevas 2009). Comparing results from profiles before and after the recalibration, we analyze its impact on the calculation of relevant parameters for adaptive optics.

Current projects for large telescopes demand a proper knowledge of atmospheric turbulence to design efficient adaptive optics systems in order to reach large Strehl ratios. However, the proper characterization of the turbulence above a particular site requires long-term monitoring. Due to the lack of long-term information on turbulence, high-altitude winds (in particular winds at the 200 mbar pressure level) were proposed as a parameter for estimating the total turbulence at a particular site, with the advantage of records of winds going back several decades. We present the first complete study of atmospheric adaptive optics parameters above the Teide Observatory (Canary Islands, Spain) in relation to wind speed. On-site measurements of CN2(h) profiles (more than 20200 turbulence profiles) from G-SCIDAR observations and wind vertical profiles from balloons have been used to calculate the seeing, the isoplanatic angle and the coherence time. The connection of these parameters to wind speeds at ground and 200 mbar pressure level are shown and discussed. Our results confirm the well-known high quality of the Canary Islands astronomical observatories.

The main goal of this work is the analysis of new approaches to the study of the properties of astronomical sites. In particular, satellite data measuring aerosols have recently been proposed as a useful technique for site characterization and searching for new sites to host future very large telescopes. Nevertheless, these data need to be critically considered and interpreted in accordance with the spatial resolution and spectroscopic channels used. In this paper we have explored and retrieved measurements from satellites with high spatial and temporal resolutions and concentrated on channels of astronomical interest. The selected datasets are OMI on board the NASA Aura satellite and MODIS on board the NASA Terra and Aqua satellites. A comparison of remote sensing and in situ techniques is discussed. As a result, we find that aerosol data provided by satellites up to now are not reliable enough for aerosol site characterization, and in situ data are required.

We describe a new method involving wavelet transforms for deriving the wind velocity associated with atmospheric turbulence layers from Generalized SCIDAR measurements. The algorithm analyses the cross-correlation of a series of scintillation patterns separated by lapses of Dt, 2Dt, 3Dt, 4Dt and 5Dt using wavelet transforms. Wavelet analysis provides the position, direction and altitude of the different turbulence layers detected in each cross-correlation. The comparison and consistency of the turbulent layer displacements in consecutive cross-correlations allow the determination of their velocities and avoid misidentifications associated with noise and/or overlapping layers. To validate the algorithm, we have compared the velocity of turbulence layers derived on four nights with the wind vertical profile provided by balloon measurements. The software is fully automated and is able to analyse huge amounts of Generalized SCIDAR measurements.

We present comprehensive and reliable statistics of high altitude wind speeds and the tropospheric flows at the location of five important astronomical observatories. Statistical analysis exclusively of high altitude winds point to La Palma as the most suitable site for adaptive optics, with a mean value of 22.13 m/s at the 200 mbar pressure level. La Silla is at the bottom of the ranking, with the largest average value 200 mbar wind speed(33.35 m/s). We have found a clear annual periodicity of high altitude winds for the five sites in study. We have also explored the connection of high to low altitude atmospheric winds as a first approach of the linear relationship between the average velocity of the turbulence and high altitude winds (Sarazin & Tokovinin 2001). We may conclude that high and low altitude winds show good linear relationships at the five selected sites. The highest correlation coefficients correspond to Paranal and San Pedro Martir, while La Palma and La Silla show similar high to low altitude wind connection. Mauna Kea shows the smallest degree of correlation, which suggests a weaker linear relationship. Our results support the idea of high altitude winds as a parameter for rank astronomical sites in terms of their suitability for adaptive optics, although we have no evidence for adopting the same linear coefficient at different sites. The final value of this linear coefficient at a particular site could drastically change the interpretation of high altitude wind speeds as a direct parameter for site characterization.