Many classical nova ejecta are enriched in CNO and Ne. Rosner et al. recently suggested that the enrichment might originate in the resonant interaction between large-scale shear flows in the accreted H/He envelope and gravity waves at the interface between the envelope and the underlying C/O white dwarf. The shear flow amplifies the waves, which eventually form cusps and break. This wave breaking injects a spray of C/O into the superincumbent H/He. Using two-dimensional simulations, we formulate a quantitative expression for the amount of C/O per unit area that can be entrained into the H/He at saturation. The fraction of the envelope that is enriched depends on the horizontal distribution of shear velocity and the density contrast between the C/O white dwarf and the H/He layer but is roughly independent of the vertical shape of the shear profile. Using this parameterization for the mixed mass, we then perform several one-dimensional Lagrangian calculations of an accreting white dwarf envelope and consider two scenarios: that the wave breaking and mixing is driven by the convective flows; and that the mixing occurs prior to the onset of convection. In the absence of enrichment prior to ignition, the base of the convective zone, as calculated from mixing-length theory with the Ledoux instability criterion, does not reach the C/O interface. As a result, there is no additional mixing, and the runaway is slow. In contrast, the formation of a mixed layer during the accretion of H/He, prior to ignition, causes a more violent runaway. The envelope can be enriched by <25% of C/O by mass (consistent with that observed in some ejecta) for shear velocities, over the surface, with Mach numbers <0.4.

Recent Chandra and XMM-Newton observations of galaxy cluster cooling flows have revealed X-ray emission voids of up to 30 kpc in size that have been identified with buoyant, magnetized bubbles. Motivated by these observations, we have investigated the behavior of rising bubbles in stratified atmospheres using the FLASH adaptive-mesh simulation code. We present results from 2-D simulations with and without the effects of magnetic fields, and with varying bubble sizes and background stratifications. We find purely hydrodynamic bubbles to be unstable; a dynamically important magnetic field is required to maintain a bubble's integrity. This suggests that, even absent thermal conduction, for bubbles to be persistent enough to be regularly observed, they must be supported in large part by magnetic fields. Thermal conduction unmitigated by magnetic fields can dissipate the bubbles even faster. We also observe that the bubbles leave a tail as they rise; the structure of these tails can indicate the history of the dynamics of the rising bubble.

Critically understanding the `standard candle'-like behavior of Type Ia supernovae requires understanding their explosion mechanism. One family of models for Type Ia Supernovae begins with a deflagration in a Carbon-Oxygen white dwarf which greatly accelerates through wrinkling and flame instabilities. While the planar speed and behavior of astrophysically-relevant flames is increasingly well understood, more complex behavior, such as the flame's response to stretch and curvature, has not been extensively explored in the astrophysical literature; this behavior can greatly enhance or suppress instabilities and local flame-wrinkling, which in turn can increase or decrease the bulk burning rate. In this paper, we explore the effects of curvature on both nuclear flames and simpler model flames to understand the effect of curvature on the flame structure and speed.

We look at the spreading of localized temperature perturbations in the accreted fuel layer of a non-rotating neutron star. The pressure at the base of the accreted fuel layer is large and the material is only partially degenerate. Any temperature perturbations and resulting pressure gradients will lead to enormous accelerations (both laterally and vertically) of the material in the fuel layer. If the burning of this fuel cannot proceed more rapidly than the spreading of this perturbation, then localized burning cannot take place, and it is likely that the ignition would have to proceed simultaneously throughout the envelope. We present some multidimensional simulations of the spreading of temperature perturbations in a helium atmosphere on a neutron star.

We look in detail at the process of mapping an astrophysical initial model from a stellar evolution code onto the computational grid of an explicit, Godunov type code while maintaining hydrostatic equilibrium. This mapping process is common in astrophysical simulations, when it is necessary to follow short-timescale dynamics after a period of long timescale buildup. We look at the effects of spatial resolution, boundary conditions, the treatment of the gravitational source terms in the hydrodynamics solver, and the initialization process itself. We conclude with a summary detailing the mapping process that yields the lowest ambient velocities in the mapped model.

Observed novae abundances and explosion energies estimated from observations indicate that there must be significant mixing of the heavier material of the white dwarf (C+O) into the lighter accreted material (H+He). Accordingly, nova models must incorporate a mechanism that will dredge up the heavier white dwarf material, and fluid motions from an early convection phase is one proposed mechanism. We present results from two-dimensional simulations of classical nova precursor models that demonstrate the beginning of a convective phase during the `simmering' of a Nova precursor. We use a new hydrostatic equilibrium hydrodynamics module recently developed for the adaptive-mesh code FLASH. The two-dimensional models are based on the one-dimensional models of Ami Glasner, and were evolved with FLASH from a pre-convective state to the onset of convection.

We present a case study of validating an astrophysical simulation code. Our study focuses on validating FLASH, a parallel, adaptive-mesh hydrodynamics code for studying the compressible, reactive flows found in many astrophysical environments. We describe the astrophysics problems of interest and the challenges associated with simulating these problems. We describe methodology and discuss solutions to difficulties encountered in verification and validation. We describe verification tests regularly administered to the code, present the results of new verification tests, and outline a method for testing general equations of state. We present the results of two validation tests in which we compared simulations to experimental data. The first is of a laser-driven shock propagating through a multi-layer target, a configuration subject to both Rayleigh-Taylor and Richtmyer-Meshkov instabilities. The second test is a classic Rayleigh-Taylor instability, where a heavy fluid is supported against the force of gravity by a light fluid. Our simulations of the multi-layer target experiments showed good agreement with the experimental results, but our simulations of the Rayleigh-Taylor instability did not agree well with the experimental results. We discuss our findings and present results of additional simulations undertaken to further investigate the Rayleigh-Taylor instability.

We present direct numerical simulations of mixing at Rayleigh-Taylor unstable interfaces performed with the FLASH code, developed at the ASCI/Alliances Center for Astrophysical Thermonuclear Flashes at the University of Chicago. We present initial results of single-mode studies in two and three dimensions. Our results indicate that three-dimensional instabilities grow significantly faster than two-dimensional instabilities and that grid resolution can have a significant effect on instability growth rates. We also find that unphysical diffusive mixing occurs at the fluid interface, particularly in poorly resolved simulations.

We discuss some of the computational challenges encountered in simulating the evolution of clusters of galaxies. Eulerian adaptive mesh refinement (AMR) techniques can successfully address these challenges but are currently being used by only a few groups. We describe our publicly available AMR code, FLASH, which uses an object-oriented framework to manage its AMR library, physics modules, and automated verification. We outline the development of the FLASH framework to include collisionless particles, permitting it to be used for cluster simulation.

One method of discriminating between the many Type Ia progenitor scenarios is by searching for contaminating hydrogen and helium stripped from the companion star. We present several high-resolution 2-D numerical simulations of the impact of a Type Ia supernova explosion with hydrogen-rich main sequence, subgiant, and red giant companions. The binary parameters were chosen to represent several classes of single-degenerate Type Ia progenitor models that have been suggested in the literature. We use realistic stellar models and supernova debris profiles to represent each binary system. For each scenario, we explore the hydrodynamics of the supernova-secondary interaction, calculate the amount of stellar material stripped from the secondary and the kick delivered by the impact, and construct the velocity and solid angle distributions of the stripped material. After the impact, the main sequence star is puffed up, much like a pre-main sequence star. The subgiant companion behaves similarly. The secondary will not be contaminated by much supernova debris from the initial impact, but it may accrete low-velocity iron-group elements (or oxygen and silicon if the ejecta is radially mixed) at late times. A He pre-white dwarf will be left behind after a supernova explosion with a red giant companion.

We present results of a cosmological hydrodynamical study of gravitational accretion in cosmic string wakes and filaments. Cosmic string wakes are formed by fast moving (v ~ c) strings. A conical deficit angle in the string spacetime induces a velocity perturbation in the background matter and a two-dimensional wake accretes in the path of the string. Filaments are formed by slow moving strings with a large amount of small scale structure. The major gravitational perturbation from slow moving strings is due to the Newtonian field induced by the effective mass of the wiggles. In cosmic string wakes, cool streams of baryons collide and are trapped at the center of the wake causing an enhancement of baryons versus dark matter by a factor of 2.4. In filaments, a high pressure is induced at the filament core and baryonic matter is expelled leading to a baryon deficit in the center of the filament.

The clustering of baryons and cold dark matter induced by a single moving string is analyzed numerically making use of a new three-dimensional Eulerian cosmological hydro code$^{1)}$ which is based on the PPM method to track the baryons and the PIC method to evolve the dark matter particles. A long straight string moving with a speed comparable to $c$ induces a planar overdensity (a``wake"). Since the initial perturbation is a velocity kick towards the plane behind the string and there is no initial Newtonian gravitational line source, the baryons are trapped in the center of the wake, leading to an enhanced baryon to dark matter ratio. The cold coherent flow leads to very low post--shock temperatures of the baryonic fluid. In contrast, long strings with a lot of small-scale structure (which can be described by adding a Newtonian gravitational line source) move slowly and form filamentary objects. The large central pressure due to the gravitational potential causes the baryons to be expelled from the central regions and leads to a relative deficit in the baryon to dark matter ratio. In this case, the velocity of the baryons is larger, leading to high post-shock temperatures.

We present a method for integrating the cosmological hydrodynamical equations including a collisionless dark matter component. For modelling the baryonic matter component, we use the Piecewise Parabolic Method (PPM) which is a high-accuracy shock capturing technique. The dark matter component is modeled using gravitationally interacting particles whose evolution is determined using standard particle-in-cell techniques. We discuss details of the inclusion of gravity and expansion in the PPM code and give results of a number of tests of the code. This code has been developed for a massively parallel, SIMD supercomputer: the MasPar MP-2 parallel processor. We present details of the techniques we have used to implement the code for this architecture and discuss performance of the code on the MP-2. The code processes $5.0 \times 10^4$ grid zones per second and requires 53 seconds of machine time for a single timestep in a $128^3$ simulation.

We investigate in this paper the core-collapse supernova explosion mechanism in both one and two dimensions. We verify the usefulness of neutrino-driven overturn (``convection'') between the shock and the neutrinosphere in igniting the supernova explosion. The 2-D simulation of the core of a 15$\mdot$ star that we present here indicates that the breaking of spherical symmetry may be central to the explosion itself and that a multitude of bent and broken fingers is a common feature of the ejecta. In 2-D, the steady-state shock radius is larger than its value in 1-D by 30\%--100\%. The critical condition for explosion is thereby relaxed. Since supernovae are driven by neutrino heating, they are coronal phenomena, akin to winds, though initially bounded by an accretion tamp. Neutrino energy is pumped into the supernova during the shock's propagation through the inner many thousands of kilometers and not instantaneously. Curiously, just after the explosion is triggered, the matter that will eventually be ejected is still bound. The high-speed fingers that emerge from the core seem a natural explanation for the nickel bullets seen in 87A and the shrapnel inferred in some supernova remnants. Within 100 ms of the explosion, a strong, neutrino-driven wind is blowing outward from the protoneutron star.