sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Frey, B. J.

Normalized to: Frey, B.

3 article(s) in total. 8 co-authors. Median position in authors list is 2,0.

[1]  oai:arXiv.org:astro-ph/0211150  [pdf] - 52885
Wide-field Imaging Interferometry Testbed II: Implementation, Performance, and Plans
Comments: 11 pages, 9 figures
Submitted: 2002-11-07
The Wide-Field Imaging Interferometry Testbed (WIIT) will provide valuable information for the development of space-based interferometers. This laboratory instrument operates at optical wavelengths and provides the ability to test operational algorithms and techniques for data reduction of interferometric data. Here we present some details of the system design and implementation, discuss the overall performance of the system to date, and present our plans for future development of WIIT. In order to make best use of the interferometric data obtained with this system, it is critical to limit uncertainties within the system and to accurately understand possible sources of error. The WIIT design addresses these criteria through a number of ancillary systems. The use of redundant metrology systems is one of the most important features of WIIT, and provides knowledge of the delay line position to better than 10 nm. A light power detector is used to monitor the brightness of our light sources to ensure that small fluctuations in brightness do not affect overall performance. We have placed temperature sensors on critical components of the instrument, and on the optical table, in order to assess environmental effects on the system. The use of these systems provides us with estimates of the overall system uncertainty, and allows an overall characterization of the results to date. These estimates allow us to proceed forward with WIIT, adding rotation stages for 2-D interferometry. In addition, they suggest possible avenues for system improvement. Funding for WIIT is provided by NASA Headquarters through the ROSS/SARA Program and by the Goddard Space Flight Center through the IR&D Program.
[2]  oai:arXiv.org:astro-ph/0210043  [pdf] - 52081
The Wide-Field Imaging Interferometry Testbed III. Metrology Subsystem
Comments: 12 pages, 12 figures. To be published in Proc. SPIE Conf. 4852 "Interferometry in Space," ed. M. Shao
Submitted: 2002-10-01
In order for data products from WIIT to be as robust as possible, the alignment and mechanical positions of source, receiver, and detector components must be controlled and measured with extreme precision and accuracy, and the ambient environment must be monitored to allow environmental effects to be correlated with even small perturbations to fringe data. Relevant detailed anatomy of many testbed components and assemblies are described. The system of displacement measuring interferometers (DMI), optical encoders, optical alignment tools, optical power monitors, and temperature sensors implemented for control and monitoring of the testbed is presented.
[3]  oai:arXiv.org:astro-ph/0210005  [pdf] - 52043
The Wide-Field Imaging Interferometry Testbed I: Purpose, Testbed Design, Data, and Synthesis Algorithms
Comments: 13 pages, 6 figures. To be published in Proc. SPIE Conf. 4852 "Interferometry in Space," ed. M. Shao
Submitted: 2002-09-30
The Wide-field Imaging Interferometry Testbed (WIIT) was designed to validate, experiment with, and refine the technique of wide field mosaic imaging for optical/IR interferometers. Here we offer motivation for WIIT, present the testbed design, and describe algorithms that can be used to reduce the data from a spatial and spectral Michelson interferometer. A conventional single-detector Michelson interferometer operating with narrow bandwidth at center wavelength lambda is limited in its field of view to the primary beam of the individual telescope apertures, or ~lambda/d radians, where d is the telescope diameter. Such a field is too small for many applications; often one wishes to image extended sources. We are developing and testing techniques analogous to the mosaicing method employed in millimeter and radio astronomy, but applicable to optical/IR Michelson interferometers, in which beam combination is done in the pupil plane. An Npix x Npix array detector placed in the image plane of the interferometer is used to record simultaneously the fringe patterns from many contiguous telescope fields, effectively multiplying the field size by Npix/2, where the factor 2 allows for Nyquist sampling. This technique will be especially valuable for interferometric space observatories, such as the Space Infrared Interferometric Telescope (SPIRIT) and the Submillimeter Probe of the Evolution of Cosmic Structure (SPECS). SPIRIT and SPECS will be designed to provide sensitive, high angular resolution, far-IR/submillimeter observations of fields several arcminutes in diameter, and views of the universe complementary to those provided by the Hubble Space Telescope (HST), the Next-Generation Space Telescope (NGST), and the Atacama Large Millimeter Array (ALMA).