The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission.

We present a data pipeline for the newly installed SST/CHROMIS imaging spectrometer, as well as for the older SST/CRISP spectropolarimeter. The aim is to provide observers with a user-friendly data pipeline, that delivers science-ready data with the metadata needed for archival. We generalized the CRISPRED data pipeline for multiple instruments and added metadata according to recommendations worked out as part of the SOLARNET project. We made improvements to several steps in the pipeline, including the MOMFBD image restoration. A part of that is a new fork of the MOMFBD program called REDUX, with several new features that are needed in the new pipeline. The CRISPEX data viewer has been updated to accommodate data cubes stored in this format. The pipeline code, as well as REDUX and CRISPEX are all freely available through git repositories or web download. We derive expressions for combining statistics of individual frames into statistics for a set of frames. We define a new extension to the World Coordinate System, that allow us to specify cavity errors as distortions to the spectral coordinate.

The most valuable asset of a space mission like Euclid are the data. Due to their huge volume, the automatic quality control becomes a crucial aspect over the entire lifetime of the experiment. Here we focus on the design strategy for the Science Ground Segment (SGS) Data Quality Common Tools (DQCT), which has the main role to provide software solutions to gather, evaluate, and record quality information about the raw and derived data products from a primarily scientific perspective. The SGS DQCT will provide a quantitative basis for evaluating the application of reduction and calibration reference data, as well as diagnostic tools for quality parameters, flags, trend analysis diagrams and any other metadata parameter produced by the pipeline. In a large programme like Euclid, it is prohibitively expensive to process large amount of data at the pixel level just for the purpose of quality evaluation. Thus, all measures of quality at the pixel level are implemented in the individual pipeline stages, and passed along as metadata in the production. In this sense most of the tasks related to science data quality are delegated to the pipeline stages, even though the responsibility for science data quality is managed at a higher level. The DQCT subsystem of the SGS is currently under development, but its path to full realization will likely be different than that of other subsystems. Primarily because, due to a high level of parallelism and to the wide pipeline processing redundancy, for instance the mechanism of double Science Data Center for each processing function, the data quality tools have not only to be widely spread over all pipeline segments and data levels, but also to minimize the occurrences of potential diversity of solutions implemented for similar functions, ensuring the maximum of coherency and standardization for quality evaluation and reporting in the SGS.

An empirical model has been developed to reproduce the drift of the spectrum recorded by EIS on board Hinode using instrumental temperatures and relative motion of the spacecraft. The EIS spectrum shows an artificial drift in wavelength dimension in sync with the revolution of the spacecraft, which is caused by temperature variations inside the spectrometer. The drift amounts to 70 km s$^{-1}$ in Doppler velocity and introduces difficulties in velocity measurements. An artificial neural network is incorporated to establish a relationship between the instrumental temperatures and the spectral drift. This empirical model reproduces observed spectrum shift with an rms error of 4.4 km s$^{-1}$. This procedure is robust and applicable to any spectrum obtained with EIS, regardless of of the observing field. In addition, spectral curvatures and spatial offset in the North - South direction are determined to compensate for instrumental effects.

Bright EUV sunspot plumes have been observed in eight out of eleven different sunspot regions with the Coronal Diagnostic Spectrometer -- CDS on SOHO. From wavelength shifts we derive the line-of-sight velocity, relative to the average velocity in the rastered area, 120 arcsec x 120 arcsec. In sunspot plumes we find that the motion is directed away from the observer and increases with increasing line formation temperature, reaches a maximum between 15 and 41 km~s$^{-1}$ close to log T $\approx$ 5.5, then decreases abruptly. The flow field in the corona is not well correlated with the flow in the transition region and we discuss briefly the implication of this finding.