We set out to look at the overlap between CHEOPS sky coverage and TESS primary mission monotransits to determine what fraction of TESS monotransits may be observed by CHEOPS. We carry out a simulation of TESS transits based on the stellar population in TICv8 in the primary TESS mission. We then select the monotransiting candidates and determine their CHEOPS observing potential. We find that TESS will discover approximately 433 monotransits during its primary mission. Using a baseline observing efficiency of 40% we then find that 387 of these ($\sim$89%) will be observable by CHEOPS with an average observing time of $\sim$60 days per year. Based on the individual observing times and orbital periods of each system we predict that CHEOPS could observe additional transits for approximately 302 of the 433 TESS primary mission monotransits ($\sim$70%). Given that CHEOPS will require some estimate of period before observing a target we estimate that up to 250 ($\sim$58%) TESS primary mission monotransits could have solved periods prior to CHEOPS observations using a combination of photometry and spectroscopy.

The CHaracterising ExOPlanet Satellite (CHEOPS) is a mission dedicated to the search for exoplanetary transits through high precision photometry of bright stars already known to host planets. The telescope will provide the unique capability of determining accurate radii for planets whose masses have already been measured from ground-based spectroscopic surveys. This will allow a first-order characterisation of the planets' internal structure through the determination of the bulk density, providing direct insight into their composition. The CHEOPS simulator has been developed to perform detailed simulations of the data which is to be received from the CHEOPS satellite. It generates accurately simulated images that can be used to explore design options and to test the on-ground data processing, in particular, the pipeline producing the photometric time series. It is, thus, a critical tool for estimating the photometric performance expected in flight and to guide photometric analysis. It can be used to prepare observations, consolidate the noise budget, and asses the performance of CHEOPS in realistic astrophysical fields that are difficult to reproduce in the laboratory. Images generated by CHEOPSim take account of many detailed effects, including variations of the incident signal flux and backgrounds, and detailed modelling of the satellite orbit, pointing jitter and telescope optics, as well as the CCD response, noise and readout. The simulator results presented in this paper have been used in the context of validating the data reduction processing chain, in which image time series generated by CHEOPSim were used to generate light curves for simulated planetary transits across real and simulated targets. Independent analysts were successfully able to detect the planets and measure their radii to an accuracy within the science requirements of the mission.

The Characterising Exoplanet Satellite (CHEOPS) is a space mission designed to perform photometric observations of bright stars to obtain precise radii measurements of transiting planets. The high-precision photometry of CHEOPS relies on careful on-ground calibration of its payload. For that purpose, intensive pre-launch campaigns of measurements were carried out to calibrate the instrument and characterise its photometric performances. We report on main results of these campaigns, provide a complete analysis of data sets and estimate in-flight photometric performance by mean of end-to-end simulation. The on-ground photometric stability of the instrument is found to be of the order of 15 parts per million over 5 hours. Our end-to-end simulation shows that measurements of planet-to-star radii ratio with CHEOPS can be determined with a precision of 2% for a Neptune-size planet transiting a K-dwarf star and 5% for an Earth-size planet orbiting a Sun-like star. It corresponds to signal-to-noise ratios on the transit depths of 25 and 10 respectively, allowing the characterisation and detection of these planets. The pre-launch CHEOPS performances are shown to be compliant with the mission requirements.

Many attempts have already been made for detecting exomoons around transiting exoplanets but the first confirmed discovery is still pending. The experience that have been gathered so far allow us to better optimize future space telescopes for this challenge, already during the development phase. In this paper we focus on the forthcoming CHaraterising ExOPlanet Satellite (CHEOPS),describing an optimized decision algorithm with step-by-step evaluation, and calculating the number of required transits for an exomoon detection for various planet-moon configurations that can be observable by CHEOPS. We explore the most efficient way for such an observation which minimizes the cost in observing time. Our study is based on PTV observations (photocentric transit timing variation, Szab\'o et al. 2006) in simulated CHEOPS data, but the recipe does not depend on the actual detection method, and it can be substituted with e.g. the photodynamical method for later applications. Using the current state-of-the-art level simulation of CHEOPS data we analyzed transit observation sets for different star-planet-moon configurations and performed a bootstrap analysis to determine their detection statistics. We have found that the detection limit is around an Earth-sized moon. In the case of favorable spatial configurations, systems with at least such a large moon and with at least Neptune-sized planet, 80\% detection chance requires at least 5-6 transit observations on average. There is also non-zero chance in the case of smaller moons, but the detection statistics deteriorates rapidly, while the necessary transit measurements increase fast. (abridged)

Planet formation models have been developed during the last years in order to try to reproduce the observations of both the solar system, and the extrasolar planets. Some of these models have partially succeeded, focussing however on massive planets, and for the sake of simplicity excluding planets belonging to planetary systems. However, more and more planets are now found in planetary systems. This tendency, which is a result of both radial velocity, transit and direct imaging surveys, seems to be even more pronounced for low mass planets. These new observations require the improvement of planet formation models, including new physics, and considering the formation of systems. In a recent series of papers, we have presented some improvements in the physics of our models, focussing in particular on the internal structure of forming planets, and on the computation of the excitation state of planetesimals, and their resulting accretion rate. In this paper, we focus on the concurrent effect of the formation of more than one planet in the same protoplanetary disc, and show the effect, in terms of global architecture and composition of this multiplicity. We use a N-body calculation including collision detection to compute the orbital evolution of a planetary system. Moreover, we describe the effect of competition for accretion of gas and solids, as well as the effect of gravitational interactions between planets. We show that the masses and semi-major axis of planets are modified by both the effect of competition and gravitational interactions. We also present the effect of the assumed number of forming planets in the same system (a free parameter of the model), as well as the effect of the inclination and eccentricity damping.

Ground based radial velocity (RV) searches continue to discover exoplanets below Neptune mass down to Earth mass. Furthermore, ground based transit searches now reach milli-mag photometric precision and can discover Neptune size planets around bright stars. These searches will find exoplanets around bright stars anywhere on the sky, their discoveries representing prime science targets for further study due to the proximity and brightness of their host stars. A mission for transit follow-up measurements of these prime targets is currently lacking. The first ESA S-class mission CHEOPS (CHaracterizing ExoPlanet Satellite) will fill this gap. It will perform ultra-high precision photometric monitoring of selected bright target stars almost anywhere on the sky with sufficient precision to detect Earth sized transits. It will be able to detect transits of RV-planets by photometric monitoring if the geometric configuration results in a transit. For Hot Neptunes discovered from the ground, CHEOPS will be able to improve the transit light curve so that the radius can be determined precisely. Because of the host stars' brightness, high precision RV measurements will be possible for all targets. All planets observed in transit by CHEOPS will be validated and their masses will be known. This will provide valuable data for constraining the mass-radius relation of exoplanets, especially in the Neptune-mass regime. During the planned 3.5 year mission, about 500 targets will be observed. There will be 20% of open time available for the community to develop new science programmes.

According to the sequential accretion model, giant planet formation is based first on the formation of a solid core which, when massive enough, can gravitationally bind gas from the nebula to form the envelope. In order to trigger the accretion of gas, the core has to grow up to several Earth masses before the gas component of the protoplanetary disc dissipates. We compute the formation of planets, considering the oligarchic regime for the growth of the solid core. Embryos growing in the disc stir their neighbour planetesimals, exciting their relative velocities, which makes accretion more difficult. We compute the excitation state of planetesimals, as a result of stirring by forming planets, and gas-solid interactions. We find that the formation of giant planets is favoured by the accretion of small planetesimals, as their random velocities are more easily damped by the gas drag of the nebula. Moreover, the capture radius of a protoplanet with a (tiny) envelope is also larger for small planetesimals. However, planets migrate as a result of disc-planet angular momentum exchange, with important consequences for their survival: due to the slow growth of a protoplanet in the oligarchic regime, rapid inward type I migration has important implications on intermediate mass planets that have not started yet their runaway accretion phase of gas. Most of these planets are lost in the central star. Surviving planets have either masses below 10 ME or above several Jupiter masses. To form giant planets before the dissipation of the disc, small planetesimals (~ 0.1 km) have to be the major contributors of the solid accretion process. However, the combination of oligarchic growth and fast inward migration leads to the absence of intermediate mass planets. Other processes must therefore be at work in order to explain the population of extrasolar planets presently known.

In the last few years, the so-called "Nice model" has got a significant importance in the study of the formation and evolution of the solar system. According to this model, the initial orbital configuration of the giant planets was much more compact than the one we observe today. We study the formation of the giant planets in connection with some parameters that describe the protoplanetary disk. The aim of this study is to establish the conditions that favor their simultaneous formation in line with the initial configuration proposed by the Nice model. We focus in the conditions that lead to the simultaneous formation of two massive cores, corresponding to Jupiter and Saturn, able to achieve the cross-over mass (where the mass of the envelope of the giant planet equals the mass of the core, and gaseous runway starts) while Uranus and Neptune have to be able to grow to their current masses. We compute the in situ planetary formation, employing the numerical code introduced in our previous work, for different density profiles of the protoplanetary disk. Planetesimal migration is taken into account and planetesimals are considered to follow a size distribution between $r_p^{min}$ (free parameter) and $r_p^{max}= 100$ km. The core's growth is computed according to the oligarchic growth regime. The simultaneous formation of the giant planets was successfully completed for several initial conditions of the disk. We find that for protoplanetary disks characterized by a power law ($\Sigma \propto r^{-p}$), smooth surface density profiles ($p \leq 1.5$) favor the simultaneous formation. However, for steep slopes ($p\sim 2$, as previously proposed by other authors) the simultaneous formation of the solar system giant planets is unlikely ...

In this Thesis I studied the formation of the four giant planets of the Solar System in the framework of the nucleated instability hypothesis. The model considers that solids and gas accretion are coupled in an interactive fashion, taking into account detailed constitutive physics for the envelope. The accretion rate of the core corresponds to the oligarchic growth regime. I also considered that accreted planetesimals follow a size distribution. One of the main results of this Thesis is that I was able to compute the formation of Jupiter, Saturn, Uranus and Neptune in less than 10 million years, which is considered to be the protoplanetary disk mean lifetime.

Giant planet formation process is still not completely understood. The current most accepted paradigm, the core instability model, explains several observed properties of the solar system's giant planets but, to date, has faced difficulties to account for a formation time shorter than the observational estimates of protoplanetary disks' lifetimes, especially for the cases of Uranus and Neptune. In the context of this model, and considering a recently proposed primordial solar system orbital structure, we performed numerical calculations of giant planet formation. Our results show that if accreted planetesimals follow a size distribution in which most of the mass lies in 30-100 meter sized bodies, Jupiter, Saturn, Uranus and Neptune may have formed according to the nucleated instability scenario. The formation of each planet occurs within the time constraints and they end up with core masses in good agreement with present estimations.

The equation of state calculated by Saumon and collaborators has been adopted in most core-accretion simulations of giant-planet formation performed to date. Since some minor errors have been found in their original paper, we present revised simulations of giant-planet formation that considers a corrected equation of state. We employ the same code as Fortier and collaborators in repeating our previous simulations of the formation of Jupiter. Although the general conclusions of Fortier and collaborators remain valid, we obtain significantly lower core masses and shorter formation times in all cases considered. The minor errors in the previously published equation of state have been shown to affect directly the adiabatic gradient and the specific heat, causing an overestimation of both the core masses and formation times.

Aims. In the context of the core instability model, we present calculations of in situ giant planet formation. The oligarchic growth regime of solid protoplanets is the model adopted for the growth of the core. Methods. The full differential equations of giant planet formation were numerically solved with an adaptation of a Henyey-type code. The planetesimals accretion rate was coupled in a self-consistent way to the envelope's evolution. Results. We performed several simulations for the formation of a Jupiter-like object by assuming various surface densities for the protoplanetary disc and two different sizes for the accreted planetesimals. We find that the atmospheric gas drag gives rise to a major enhancement on the effective capture radius of the protoplanet, thus leading to an average timescale reduction of 30% -- 55% and ultimately to an increase by a factor of 2 of the final mass of solids accreted as compared to the situation in which drag effects are neglected. With regard to the size of accreted planetesimals, we find that for a swarm of planetesimals having a radius of 10 km, the formation time is a factor 2 to 3 shorter than that of planetesimals of 100 km, the factor depending on the surface density of the nebula. Moreover, planetesimal size does not seem to have a significant impact on the final mass of the core.