Normalized to: Filiba, T.
[1]
oai:arXiv.org:1202.0938 [pdf] - 472628
Advanced Multi-beam Spectrometer for the Green Bank Telescope
Roshi, D. Anish;
Bloss, Marty;
Brandt, Patrick;
Bussa, Srikanth;
Chen, Hong;
Demorest, Paul;
Desvignes, Gregory;
Filiba, Terry;
Fisher, Richard J.;
Ford, John;
Frayer, David;
Garwood, Robert;
Gowda, Suraj;
Jones, Glenn;
Mallard, Billy;
Masters, Joseph;
McCullough, Randy;
Molera, Guifre;
O'Neil, Karen;
Ray, Jason;
Scott, Simon;
Shelton, Amy;
Siemion, Andrew;
Wagner, Mark;
Watts, Galen;
Werthimer, Dan;
Whitehead, Mark
Submitted: 2012-02-04
A new spectrometer for the Green Bank Telescope (GBT) is being built jointly
by the NRAO and the CASPER, University of California, Berkeley. The
spectrometer uses 8 bit ADCs and will be capable of processing up to 1.25 GHz
bandwidth from 8 dual polarized beams. This mode will be used to process data
from focal plane arrays. The spectrometer supports observing mode with 8
tunable digital sub-bands within the 1.25 GHz bandwidth. The spectrometer can
also be configured to process a bandwidth of up to 10 GHz with 64 tunable
sub-bands from a dual polarized beam. The vastly enhanced backend capabilities
will support several new science projects with the GBT.
[2]
oai:arXiv.org:1109.1136 [pdf] - 406966
Current and Nascent SETI Instruments
Siemion, Andrew P. V.;
Cobb, Jeff;
Chen, Henry;
Cordes, Jim;
Filiba, Terry;
Foster, Griffin;
Fries, Adam;
Howard, Andrew;
von Korff, Josh;
Korpela, Eric;
Lebofsky, Matt;
McMahon, Peter L.;
Parsons, Aaron;
Spitler, Laura;
Wagner, Mark;
Werthimer, Dan
Submitted: 2011-09-06
Here we describe our ongoing efforts to develop high-performance and
sensitive instrumentation for use in the search for extra-terrestrial
intelligence (SETI). These efforts include our recently deployed Search for
Extraterrestrial Emissions from Nearby Developed Intelligent Populations
Spectrometer (SERENDIP V.v) and two instruments currently under development;
the Heterogeneous Radio SETI Spectrometer (HRSS) for SETI observations in the
radio spectrum and the Optical SETI Fast Photometer (OSFP) for SETI
observations in the optical band. We will discuss the basic SERENDIP V.v
instrument design and initial analysis methodology, along with instrument
architectures and observation strategies for OSFP and HRSS. In addition, we
will demonstrate how these instruments may be built using low-cost, modular
components and programmed and operated by students using common languages, e.g.
ANSI C.
[3]
oai:arXiv.org:0904.1181 [pdf] - 23169
Digital Instrumentation for the Radio Astronomy Community
Parsons, Aaron;
Werthimer, Dan;
Backer, Donald;
Bastian, Tim;
Bower, Geoffrey;
Brisken, Walter;
Chen, Henry;
Deller, Adam;
Filiba, Terry;
Gary, Dale;
Greenhill, Lincoln;
Hawkins, David;
Jones, Glenn;
Langston, Glen;
Lazio, Joseph;
van Leeuwen, Joeri;
Mitchell, Daniel;
Manley, Jason;
Siemion, Andrew;
So, Hayden Kwok-Hay;
Whitney, Alan;
Woody, Dave;
Wright, Melvyn;
Zarb-Adami, Kristian
Submitted: 2009-04-07
Time-to-science is an important figure of merit for digital instrumentation
serving the astronomical community. A digital signal processing (DSP) community
is forming that uses shared hardware development, signal processing libraries,
and instrument architectures to reduce development time of digital
instrumentation and to improve time-to-science for a wide variety of projects.
We suggest prioritizing technological development supporting the needs of this
nascent DSP community. After outlining several instrument classes that are
relying on digital instrumentation development to achieve new science
objectives, we identify key areas where technologies pertaining to
interoperability and processing flexibility will reduce the time, risk, and
cost of developing the digital instrumentation for radio astronomy. These areas
represent focus points where support of general-purpose, open-source
development for a DSP community should be prioritized in the next decade.
Contributors to such technological development may be centers of support for
this DSP community, science groups that contribute general-purpose DSP
solutions as part of their own instrumentation needs, or engineering groups
engaging in research that may be applied to next-generation DSP
instrumentation.
[4]
oai:arXiv.org:0809.2266 [pdf] - 403898
A Scalable Correlator Architecture Based on Modular FPGA Hardware,
Reuseable Gateware, and Data Packetization
Parsons, Aaron;
Backer, Donald;
Chen, Henry;
Droz, Pierre;
Filiba, Terry;
Manley, Jason;
MacMahon, David;
McMahon, Peter;
Parsa, Arash;
Siemion, Andrew;
Werthimer, Dan;
Wright, Melvyn
Submitted: 2008-09-12, last modified: 2009-03-17
A new generation of radio telescopes is achieving unprecedented levels of
sensitivity and resolution, as well as increased agility and field-of-view, by
employing high-performance digital signal processing hardware to phase and
correlate large numbers of antennas. The computational demands of these imaging
systems scale in proportion to BMN^2, where B is the signal bandwidth, M is the
number of independent beams, and N is the number of antennas. The
specifications of many new arrays lead to demands in excess of tens of PetaOps
per second.
To meet this challenge, we have developed a general purpose correlator
architecture using standard 10-Gbit Ethernet switches to pass data between
flexible hardware modules containing Field Programmable Gate Array (FPGA)
chips. These chips are programmed using open-source signal processing libraries
we have developed to be flexible, scalable, and chip-independent. This work
reduces the time and cost of implementing a wide range of signal processing
systems, with correlators foremost among them,and facilitates upgrading to new
generations of processing technology. We present several correlator
deployments, including a 16-antenna, 200-MHz bandwidth, 4-bit, full Stokes
parameter application deployed on the Precision Array for Probing the Epoch of
Reionization.